Extension for the previous one
Hai all
I want to check wether there are fields WWRET; WWREV, WWCUC WWGCN in the table CE1XXXX where (XXXX is Operating concern will be populated in the selection selection screen.)
And The field should have
Techn. Field Type min. Field Length
WWRET CHAR 2
WWREV CHAR 4
WWCUC CHAR 3
WWGCN CHAR 10
Can anyone help with the code logic
Thanks in advance
Oli
Hallo Oli,
as you could see below.
It works.
If you have more qwestions write me a mail
[email protected]
P.S. you can write it german too. ))
Gruss
Vladimir
REPORT ZZZVG_TEST .
TABLES: DD03L.
SELECT-OPTIONS TABLE FOR DD03L-TABNAME.
SELECT-OPTIONS WWFIELD FOR DD03L-FIELDNAME.
SELECT * FROM DD03L WHERE
TABNAME IN TABLE AND
FIELDNAME IN WWFIELD.
CASE DD03L-FIELDNAME.
WHEN 'WWRET'.
IF DD03L-DATATYPE = 'CHAR'
AND
DD03L-LENG = 2.
OK ! ****************
ELSE.
NICHT OK ! *************
ENDIF.
WHEN 'WWREV'.
IF DD03L-DATATYPE = 'CHAR'
AND
DD03L-LENG = 4.
OK ! ****************
ELSE.
NICHT OK ! *************
ENDIF.
WHEN 'WWCUC'.
IF DD03L-DATATYPE = 'CHAR'
AND
DD03L-LENG = 3.
OK ! ****************
ELSE.
NICHT OK ! *************
ENDIF.
WHEN 'WWGCN'.
IF DD03L-DATATYPE = 'CHAR'
AND
DD03L-LENG = 10.
OK ! ****************
ELSE.
NICHT OK ! *************
ENDIF.
ENDCASE.
ENDSELECT.
Similar Messages
-
I created a new apple id because the previous one no longer exists as an email (domain had to be cancelled). I keep seeing the old one pop up in my iPhone for which I don't remember the password. How can I get rid of it??? Or how can I reset the password if the email doesn't exist??? I also tried answering a question (my date of birth) but it says it's wrong.
I'm really frustrated with the apple id!!!
Frustrated!!!In one of the help pages for managing your Apple ID (http://support.apple.com/kb/HE40), it shows two separate sections, one for Apple ID and one for Primary Email address. When I go to manage my Apple ID, I see only a single section for both. Can the two be 'separated', especially when you face the situation of having to discontinue your email address for some reason?
I also noticed that when navigating to Apple ID Support Communities, it shows my nickname 'dishdy'. How and when did I insert this? In the current sequence for creating an Apple ID I don't see this. In my current profile I don't see this.
In any case, I have freed myself from my previous Apple ID (@artemis.it) on my iPhone.
Thanks for your help. -
i just updated my latest java but the update is causing problems with some external devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device.
Is this possible and how do i do that?
Anyone who responds thanks for that!
Juko
I am running
Hardware Overview:
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2,66 GHz
Number of Processors: 2
Total Number of Cores: 4
L2 Cache (per Processor): 4 MB
Memory: 6 GB
Bus Speed: 1,33 GHz
Boot ROM Version: MP11.005D.B00
SMC Version (system): 1.7f10
Serial Number (system): CK7XXXXXXGP
Hardware UUID: 00000000-0000-1000-8000-0017F20F82F0
System Software Overview:
System Version: Mac OS X 10.7.5 (11G63)
Kernel Version: Darwin 11.4.2
Boot Volume: Macintosh HD(2)
Boot Mode: Normal
Computer Name: Mac Pro van Juko de Vries
User Name: Juko de Vries (jukodevries)
Secure Virtual Memory: Enabled
64-bit Kernel and Extensions: No
Time since boot: 11 days 20:39
Message was edited by HostJava 6 you can't as Apple maintains it, and Java 7 you could if you uninstall it and Oracle provides the earlier version which they likely won't his last update fixed 37 remote exploits.
Java broken some software here and there, all you'll have to do is wait for a update from the other parties. -
Waiting for the previously running task to complete issue
I am running the full extract process , and one task SDE_ORA_InventoryProductDimension running for 18 hours and its status is "Waiting for the previously running task to complete"
but all running tasked are completed and left tasks are queued by this task, so what make this issue happen?
I restart the informatica server and the task running now!
but for this task I run before it has ten million records , and it always make the dataware house server's cache full and server down,
so how to handle this problem?
Edited by: Yu Yang on Apr 16, 2013 4:58 AMCheck if /*+ FULL(PER_ALL_PEOPLE_F) */ hint existed in the SDE_ORA_INVENTORYPRODUCTDIMENSION_FULL mapping Source qualifier?.
I suggest you to raise an SR and check with your DBA's if they can do something to improve the Performance.
Mark helpfull if it helps.
Regards,
Veeresh Rayan -
But how do I create a new iTunes backup password without knowing the previous one?
In case anyone keeps track of such things, I'm among those folks who really doesn't recall ever being asked to create an iTunes backup password, but that's irrelevant to my question.
I'm not in any bind. I don't need my backup files to restore anything. I will shed no tears as they are moved to the Recycle Bin (indeed, I will gladly do the deed myself).
That said, it appears impossible to create a new backup password without knowing the previous one.
If the only "solution" is to wipe my iPhone's memory and start from scratch, I will be a sad camper.
Any help? Are backups to iCloud encrypted?
Cheers...Additionally:
Be super critical & meticulous (and whatever other synonym I missed) when you get a new password:
Write it onto your bedroom wall, or someplace off of a computer that you will always find.
If you active 2-step verification, the key is VERY important. Lose it & you may be toast.
If you don’t 2 step verify, & use the Security Question instead --> do not lose, or forget the answers.
Very nearly the same outcome!!!!!: Bad experience.
If you add a 2nd email address, make sure its a RESCUE address not just an alternate address.
If you lose these, you lose access to your 3rd party purchases via Appstore for future upgrade. That will make you VEWY, VEWY UNHAPPY. Apple new OS versions do update, but add a new device & likely you will be unable to use your content on that device. It will never load if the ID locks up. -
Giving error while creating a sales contact for the previous year (2008)
Hi Friends,
We are currently with SP12. When we try to create a sales contract for the previous year it is giving error like "Schedule line is for the item 100 cannot be after the order's latest delivery date".
i tried debugging and found that that there is a rule created for this (in SP12). I commented the rule and tried to create a contract but, again got an error "Error while saving". This error I can't catch while debugging.
I even didn't find where the schedule line date and header cancel dates are set so that I can change the dates manually.
If any one has any idea, kindly help me.
Best regards,
Swarna SeetaHi Wolfhard,
Thanks for the reply.
You are right and I have uncommented the line which assigns true to the return value and the contract got saved now.
Thank you so much.
I just want to know whether commeting this rule effects any of the functionalities of the sales contract.
Best regards,
Swarna Seeta -
Overlap audio regions on 1 track without cutting the previous one off
Im trying to overlap multiple audio regions on one track, so that the next one starts before the previous one ends but when i do this, each consecutive overlap basically replaces the remaining region of the one before it. to be more specific in order to maybe paint a better picture of what i am asking... i am creating machine gun audio for a video clip and i have a loop of a single shot plus the shell falling to the ground. im trying to overlap the loops so that the single shot of each come together in rapid fire succession to create the machine gun firing sound, but i want the sound of the shell falling for each shot to continue to play under the multiple copies of the overlapping loop. the problem is, when i overlap multiple loops, its not finishing the noise of the shell falling to the ground for each shot, it only plays the falling shell at the very end when there is no other overlap. i hope i did an ok job explaining what i am asking, haha trying to type this out was much more difficult that initially anticipated. thanks in advance for any help.
That's normal. Audio tracks are not polyphonic. Use several tracks or EXS24.
Christian -
Is the new iphone a much better upgrade to the previous one?
Well i was hoping to go to my local cellular retailer to check out the new phone, but they havent display it out yet. Just wondering for those of you who got one today, how are you liking it? Is it really worth the upgrade from the previous one?
How is the video recording? Is it smooth and clear?Yes NFSUndercover and Sims 3 run way smoother. No crashing every so often in the Sims either.
I knew it felt 2x faster immediately, because when you open and close any apps (even texting and such), it is silky smooth with NO hiccup. My 3G felt a bit sluggish, and the games could slow down every so often. 3GS is what the 3G should have been -
Traversing from one screen to the previous one using back button
Hi all,
I am new to the forum and want the help of the experts over ther for this doubt i encountered. I want to know how we can traverse from one screen to the previous one using the back button. Like if presently i am in 4th screen if i want to go back directly to the 2nd one then how to do that.
Kindly help me by clarifying this doubt.
ThanksHi Jana,
If u r using the screen painter then u need to create a button and in status there.code as set pf-status.
case sy-ucomm.
when 'back'.
leave to screen <screen number> here if u want to go to the other screen i.e to screen 200 ffrm 400 then u can code it as
leave to screen 400.
or else code it as
if screen = '200'.
leave to screen 400.
try this eg it might work ..
regards,
sana.
reward points for helpful answers. -
Salary in the current month and the previous one
Hi
I have a table that stores payroll details like the following stracture
earn code
period from
period to
user_id
time
I want to do one report which displays both the salary of one employee in the current month and his salary is the previous one
Thank you for your helpyou might use the LAG-function to get the previous months salary. Hard to know, as you did not provide any information about your report and database versions.
-
Opening a file without hearing the previous one....
How do we do to open a file without hearing the previous one if we open multiples files in a short time without willing to close the previous one each time ??
How do we do to open a file without hearing the previous one if we open multiples files in a short time without willing to close the previous one each time ??
If you don't wish to listen to all playing videos and it is too much trouble to stop or close non-foremost player windows, then don't use the QT X (or any similar) media player for playback. (I.e., this is what they are programmed to do.) Instead, use a media player like QT 7 which has a user preference that can be set so that only the "foremost" player window audio is heard when multiple videos are being played simultaneously. -
iCal has dropped a monthly event for the previous four months....... why did it disappear? and where is it? It was the same event but a different day each month.
I installed this same digitizer in my T|X some weeks ago. Some discussion of my experience may be found in this Usenet posting and subsequent thread.
The stock digitizer in my T|X had always had some significant alignment issues (for which PowerDigi was able to compensate very nicely) and sensitivity which was uneven, but which usually required a heavier touch than I liked.
Eventually, it began to develop a “dead spot” near the upper left. My T|X was under warranty, so I probably ought to have sent it in to Palm to be repaired, but I wasn't willing to be without it for the required amount of time, and I've heard enough reports of other T|X owners getting unsatisfactory results this way. I'd heard enough good reports about the PDAPARTS.COm digitizer, that I decided that the only acceptable way to repair my T|X would be to install one of those.
After however many weeks it has been, I am still very pleased with the results. It continues to work flawlessly; it is much more sensitive, so it doesn't require nearly so heavy a touch, and I very much like the hard feel that it has, compared to the spongier feel of the stock digitizer.
My wife's T|X still has its stock digitizer, and it has so far not shown any of the same problems that mine did, or for which the T|X has become notorious, but the feel is noticeably inferior. She's content with it the way it is, but I think that if I were to ever buy another T|X for myself, I wouldn't wait for the stock digitizer to fail. The PDAPARTS.COM digitizer is simply superior in every imaginable way; and, in my opinion, a T|X with the PDAPARTS.COM digitizer installed is sufficiently superior to one with the stock digitizer (even if it isn't defective) to be very much worth the expense and trouble of installing it.
Post relates to: Palm TX -
Is there a way to develop an HTML based extension for Dreamweaver like ones for PS or AI?
Is there a way to develop an HTML based extension for Dreamweaver like ones for PS or AI? I mean like extension produced by Extesion Builder 3.
Snippets is a good idea. But you can also do this with a template. Each time you use FILE | New > Page from Template, as you would to create a new child page, you have the option to enable or disable an option called "Update page when template changes". If that option is DISABLED (i.e., unchecked), then the child page will be created but with NO TEMPLATE MARKUP (i.e., no editable/non-editable regions)! Seems that's exactly what you want, no?
-
At work we use a calendar system that requires flash. My previous shockwave flash (comes with the desktop pc I purchased) was the Shockwave Flash 10.3.181.22
Following my superior's advise, I install the newer version, Shockwave Flash 11.6.0.626
I can't really tell the difference, but I'm content I have it installed.
I'm using Mozilla, and when I go to Tools --> Add-ons, I see both Shockwave Flash versions ENABLED. Do I have to disable the older version in order for the newer one to function properly, or do I just let them both be enabled as it is now?
Thanks for helpingHi, You have Shockwave Player Shockwave Flash 11.6.0.626 which you have listed. Don't disturb that.
Adobe Flash Player is the browser plugin which you want to update. The latest version for that is 10.3.181.26 which was just released on 6/14/11.
You can update here:
http://www.adobe.com/products/flashplayer/fp_distribution3.html
Use the EXE Installer for the plugin based browsers
Hope that helps,
Thanks,
eidnolb -
Prohibiting running a new package while the previous one is still running
Hi Colleagues,
I'm looking for a way to prohibit a new package running while the previous one is still working. Is it possible to make a sequence of "to be run" packages, when the next one starts right when the previous one finishes?
Or maybe just prohibit starting a new package while the some package is already running.
Thank you.
Best regards,
SergeyHi Sergey
If you want to restrict the concurrent execution of data manager packages, you will have to edit your data manager package and add custom code.
For example:
You could put in queue based logic, when the package is first run, it inserts a record into a 'Queue' table, then once it completes the execution of its tasks, it deletes the record from the queue table.
So, if anybody runs the same data manager package, it checks to see if the record exists in the queue table, if it does, it ends the execution of the package.
I hope this helps
Kind Regards
Daniel
Maybe you are looking for
-
Problem saving png error (Hex 0xBFF604A5) File not found.
Does anyone have some insight into how to correctly save a .png file that I grabbed from an IMAQ image? I've been trying to use IMAQ write file 2.vi, but it doesn't seem to be able to create a file. My code works fine if I pass it an existing .png
-
Error Showing While Using Report Generation ToolKit VIs
Hi All, When I use report generation VIs Like Excel Easy Tables its showing following errors and i am not able to contiune using the same, C:\Program Files\National Instruments\LabVIEW 8.2\vi.lib\utility\NIReport.llb\Set Report Font.vi
-
G/L Account Master Value not display in drop down screen
Hi All, G/L Master data some G/L Account is created but in the Selection filed drop down in the g/l account number when we select that particular g/l account no. wise search system give the massage -- No values for this selection Message no. DH802 Bu
-
My ipod touch 4th gen is a having a few problems with charging and turning on, my ipod comes up with the extremely low on power symbol and then i put it into my computer and it comes up with the charging symbol then it goes to the apple logo and the
-
Mac Pro 5,1 Fans full throttle, SMC reset does not help
Hello Community, i have the following issue: - Mac Pro 5,1 - Latest Firmware; no SMC update available - Fans (of case, not graphics card) running full throttle as soon as OS X is active (installed or in a installation phase). - During boot up, fans r