Extension Manager CC error message.
Anyone know why Extension Manager CC v7.3.2.39 is producing the error message "Failed to update database. The extension will not be installed." when trying to install a ZXP with two C++ Plugins defined by a MXI file and signed with a valid cert using the "ZXPSignCmd" tool? All the resources defined in the mxi file are being installed into the InDesign CC 2014; however, the extensions DO NOT show up when I launch ID CC 2014. Below is an excerpt from my "ExManCoreLibrary_.log" file showing the [Error] lines. Any assistance would be greatly appreciated. Thank you.
[Error] Fri Dec 12 11:47:16.810 2014 (ExManDBWrapper.cpp, 538) -"saveInstalledFiles failed":Generic SQLite error: Unknown error code: 2067: INSERT into Tb_ExtFileMap VALUES(?,?)
[Error] Fri Dec 12 11:47:16.811 2014 (ExtensionBase.cpp, 2823) -CExtensionBase::updateDBOnInstall: saveInstalledFiles() failed for extId 694, status = -503!
[Error] Fri Dec 12 11:47:16.814 2014 (ExtensionBase.cpp, 899) -CExtensionBase::install: updateDBOnInstall() failed for extension "<extension_name>", status is -509!
Please check and confirm which version of Extension Manager you are using, and which version of Dreamweaver
Similar Messages
-
Extension Manager CC error code U44M1P34 will not install product
Received update notice and ran the updater for the Extension Manager CC it turned with an error of U44M1P34 and contact support. Which the automated system fails to offer help for the Extension Manager. Signing out of Creative Cloud and relauching fails to clear the problem. All efforts to install the Extension Manager CC end with same error code. No way of finding a solution or contacting support!
I never withdrew any claim or closed any case, yet Adobe Support Staff did in fact close case. Adobe Support would lose connection and failed to reconnect or follow-up, even through contact information was provided. Support Staff closed or withdrew case to cover up their lacking a working solution and the failure in knowledge about Error Codes and their solutions. It seems a general lack of communication within Adobe to insure Support Staff have the correct answers for all Error Codes. Clearly the Code writers a reason for the Error Codes for any given product and a solution for clearing any Error Code, why Adobe Support Staff doesn't have access to this information, so they can address Customer's Problems is anyone's guess! But, clearing a Case before it is solved. Well, that is just sweeping the problem under the rug, in hope it goes away! Adobe Support is a BIG JOKE! Why support a Company that will not Support it's Customer Base?
7/7/14
Case #0185682058: Updating issue
Closed
7/7/14
Case #0185681800: Error code U44M1P34 Adobe Extension Man
Open - Pending Adobe Response
7/7/14
Case #0185681501: Still no help for Adobe Extension Manage
Open - Pending Adobe Response
7/5/14
Case #0185675782: Adobe Extension Manager CC Error code u4
Withdrawn
7/4/14
Case #0185675711: support for clearing Error u44m1p34 for
The issue of Adobe Extension Manager Version 7.0.0.347Withdrawn
The Problem of Adobe Extension Manager CC Version 7.0.0.347 not updating and returning error Code u44m1p34 still exists and hasn't been solved! Adobe Support would perform a few system checks then lose connection and never follow-up or reconnect. Six attempts using Chat and One Calling Adobe Support, still failed to correct the problem. At Adobe Support direction I have rewritten Msconfig and deleted AAMUpdater folder 1.0. Th e end results is update notice disappeared, but Adobe Extension Manager CC Version 7.0.0.347 never updated and still returns error code u44m1p34. What good is contacting Adobe Support if they do not have staff to handle issue or the correct information to solve problems within the program code? I have wasted 2.5 weeks on this issue and have nothing to show for all the work, just ERROR CODE U44M1P34. What a mess this bad code has caused! How long must people wait for a solution or a patch to be released, that addresses this Error Code? At this stage Contacting Adobe Support is a bad joke, it just doesn't exist! Adobe Extension Manager CC isn't even list in Product Support Menus! My information was not only given to each Adobe Support Staff, it is also listed every time, I log onto Adobe.com. I am tired of the guessing by the Adobe Support in Addressing this problem. I do not want a guess, I want a real and solid solution or a patch file. I played Adobe Support game and I am unwilling to do more damage to my computer by deleting files or rewriting the Operating System on some wild goose chase! I have been a Customer since 1980 and I expected a lot more than this from Adobe Support! -
Ipod manager internal error message any help
I have just recieve my "repaired" iPOD and I am trying to put all my music back on but it keeps asking for an update, however when I try and update I get the "ipod manager internal error" message
anyone have any clues as to what I do to solve thishi mr colt!
fingers crossed, this document might be useful:
iPod Updater for Windows: "Internal manager error" occurs when restoring or updating iPod
love, b -
Extension Manager javascript error
when I first start dw8 - here is the error I get:
The following javascript error(s) occurred:
at line 56 of file ......dwscriptsExtData.js.
Reference error: dwscripts not defined
also - when I get dw8 up and running and try to open the
extension manager I get this error:
while excutiong onLoad in Manage Extensions.htm, the
following javascript error(s) occurred:
In fil ""Manage Extensions"":
ReferenceError: manageExtensions is not defined
Everything worked before I added two extensions:
Adv_Email_Link.mxp and QuickLink.mxp
I made a mistake with Adv_Email_Link.mxp - it does not work
with dw8. But quick link should.
At this point I have uninstalled them and have restarted dw8
and rebooted twice. Nada!!!
Help please!
BrookeYour extensions are the culprit .. they probably overwrote
some Dreamweaver
code. Uninstalling them didn't put the code back, most
likely. If the code
overwritten is the copy in the User config folder, then you
can go to
C:\Documents and Settings\yourname\Application
Data\Macromedia\Dreamweaver 8
and delete the Configuration folder. The next start up of DW8
will put a
new one in there. That will be a default condition config
folder (so make
sure you have your extensions saved somewhere) but is better
than
reinstalling the entire program.
However .. if the code overwritten is in the Program
Files/Macromedia folder
.. you will have to reinstall DW8. And stay away from that
extension in the
future.
Nancy Gill
Adobe Community Expert
BLOG:
http://www.dmxwishes.com/blog.asp
Author: Dreamweaver 8 e-book for the DMX Zone
Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
2003)
Technical Editor: DMX 2004: The Complete Reference, DMX 2004:
A Beginner's
Guide, Mastering Macromedia Contribute
Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
Web Development
"Cataluna" <[email protected]> wrote in
message
news:e2ofj8$bmu$[email protected]..
> when I first start dw8 - here is the error I get:
>
> The following javascript error(s) occurred:
> at line 56 of file ......dwscriptsExtData.js.
> Reference error: dwscripts not defined
>
> also - when I get dw8 up and running and try to open the
extension manager
> I
> get this error:
>
> while excutiong onLoad in Manage Extensions.htm, the
following javascript
> error(s) occurred:
> In fil ""Manage Extensions"":
> ReferenceError: manageExtensions is not defined
>
> Everything worked before I added two extensions:
Adv_Email_Link.mxp and
> QuickLink.mxp
>
> I made a mistake with Adv_Email_Link.mxp - it does not
work with dw8. But
> quick link should.
>
> At this point I have uninstalled them and have restarted
dw8 and rebooted
> twice. Nada!!!
>
> Help please!
> Brooke
> -
Extensions Manager upgrade error.
I have CS 5 and am trying to follow upgrade protocol but keep getting an error message when trying to install the upgrade.
Extension Manager 6.0.5 Update
Installation failed. Error Code: U44M2P7
Any ideas?See the solution in the help document linked below:
http://helpx.adobe.com/creative-suite/kb/unable-apply-extension-manager-update.html -
While trying to download the latest issue of Creative Cloud Error message 82 says Adobe Application Manager has to be closed first, which I can't figure out to do. Can anyone help me with this? Thanks. Rich
Thanks. I finally went to helpx.adobe.com and has a Chat with someone probably in subcontinental India. He had me go to the Activity Monitor and shut down a bunch of activities, after which the CC install worked. Now the log in screen asks for a redemption code, which I never got. Guess I'll have to return to India to get that done.
-
Hi All,
I have stopped updating adobe software b/c I read that the adobe update software inserts extensions into the mac software system, causing annoying/time consuming error messages when downloading new pdfs. I get adobe update notices 2-3x/week. What do you recommend? I use an iMac OS 10.94.
thanks for your help.Preview will do all that and is part of the OS.
Mac Basics: Preview app views and edits PDFs and images
With Adobe, if it's working, then it should be fine. See here
http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Macintosh -
Error during testing of Funds Management. Error- Message no. FMCF503..
Hi Gurus,
I am configuring Funds Mgt for the first time and have encountered some problem. I am trying to create a PO and facing the following error after entering the required Fund Area & Fund Center:
Budget for all Years using fiscal year-based encumbrance tracking of value type Purchase Orders
Message no. FMCF503
Diagnosis
You have activated multi-year budget for your FM area. This system setting requires the use of period-based encumbrance tracking.
The documents of value type Purchase Orders in your FM area have not been updated on a period basis up until now.
Procedure
Activate period-based encumbrance tracking for the update profile assigned to your FM area or for the value type Budget for all Years.
Procedure for System Administration
Define Setting
As per the error I have done the setting to Period based tracing but still it is providing the error.
Kindly assist.
Thanks in advance.
Regards,
Prasad A. Wathare.Hi Prasad,
Please, check your customizing in transaction OF39. You should have an entry for value type 51.
This is the reason for the error message FMCF503.
BUT you should not activate PBET without knowing the consequences of it. For more details on this, please also refer to the program documentation and SAP HELP chapter Public Sector Management -> Funds Management -> Recording
Actual and Commitment Data -> Period-Based Encumbrance Tracking.
You need to be sure that you want to activate multi-year budget based on the business requirements of your company.
I suggest you to review the need of this customizing and not try to correct the error message.
PBET activation its an important decision in any company.
Best Regards,
Vanessa. -
Extension Manager upgrade error
Extension Manager 6.0.4 Update
Installation failed. Error Code: U44M1P7
This is what I get. I've tried restarting the machine several times, Nothing. Always the same error.
Please advise.This should help. http://helpx.adobe.com/creative-suite/kb/unable-apply-extension-manager-update.html
-
Batch management "Display errors" Message no. M3530
Hi Experts,
we want to activate batch management in material master data for more than 1000 items.
1. Which most of the items having stock without batch in current period and in previous period and few items stock are 0.
2. Few of items have the PR, open PO and it included BOM
I am trying to activate the batch management which the material stock are 0, the system allowing for few items to change and most of items system showing below error.
Batch management requirement cannot be changed; choose "Display errors"
Message no. M3530
please suggest, what are procedure need to follow to activate the batch management in material master.
Thanks & Regards,
SivanandanHi,
refer below treads -
Batch management requirement cannot be changed; choose "Display errors
Activate batch in material master data
Batch management is not activating in material master -
When I try to Install any extension in CC I allways get this message!!! And Yes I am using ZXP extensions.
Thank you in advanceThere is only "Others" listed in the product panel. Apparently Extension Manager CC didn't recognize Photoshop CC was installed in your machine. Have you installed Photoshop CC (If you only have Photoshop CS6, you should use Extension Manager CS6 to install GuideGuide)? If yes, have you moved or renamed the Photoshop CC installation folder? Please search my post about "ExtendScript Toolkit" in this forum, then follow it to check if the product configuration database (PCD) is correct in your machine.
-
Extension Manager Update - error code U43MID207
Hello. I have recently ported my photoshop cs5 Extended X64 (Version 12) from my 64 bit Windows 7 machine to a 64 bit Windows 8,1 machine.
Everything works ok and I have updated all the component programmes except Adobe Extension Manager,
When I try to install the extension manager update I get error code U43MID207.
Can anyone help please?
Keithupdate manually, http://www.adobe.com/downloads/updates/
-
IDoc extension for HRMD_A07 - Error message B1-070
I am trying to create a custom extension to HRMD_A07 to capture some additional data added to infotype 0001. I have gone through the WE31, WE30, WE82, SM30 transactions to create the extension but when I try to test with PFAL I am getting the message B1-070.
Internal error: Program read table idoc_structure, command
data_select_for_block, argument ZHR_SEG
The extractor appears to be trying to fill in the original HRMD_A07 basic type and the HRMD_A07 with the extension.
Any hints?
Thanks, Rob.Dear Rob,
Although your post's date is old but I would share my knowledge for whom has the same issue.
Last day I had the same problem and could not find any solution on internet so I had to trace the code. Fortunately I managed to fix the problem My colleagues had extended an IDOC by a segment but after that the segment was deleted so I was getting an error in ALE.
Issue comes "DATA_SELECT_FOR_BLOCK" method which is using I_DOC_DATA table that fills in PFAL transaction. thru running PFAL IDOC data reads from table T777D.
Go into and find the related record and clear it
By the way after that I found http://scn.sap.com/thread/3322338 useful
Cheers,
Omid -
When configuring a new Unity Voicemail Account I receive this message : The phone number or extension has already been assigned to some other object. I understand that this means that the 10 digit number I am trying to configure as the alternate extension for this user is already configured for another object with Unity.
I need to search by the 10 digit number and determine where it is configured so I can change it and map to the correct end user.
I have attempted to to search Users via DTMF Access ID using the 10 digit number with nothing being returned via that search.
How do I Search all of the copnfigured Alternate Extensions within our Unity Server?A subscriber info dump is likely the fastest way. If you're curious regarding other methods, you can also use the Data Link Explorer (CUDLE) tool which is in the Cisco Unity Tools Depot. All extensions for all objects are referenced in the "DTMFAccessId" table. The View menu has a Query Builder which you can use to compile a SQL query that searches for a digit string. It's best to search for both the 10 digit string as well as an abbreviated string as Unity sees them essentially the same and they are usually should be associated with a single subscriber. Once you find a match, you can use the "ParentObjectId" value associated with the DTMF access ID to look for a matching owner in the "GlobalSubscriber" table. The ParentObjectId should match the SubscriberObjectId for a subscriber (assuming the DTMF access ID is assigned to a subscriber). This is the same thing as looking at SQL; however, you are not directly accessing the DB so this is generally considered the safest way to browse and get a feel for where things are.
Hailey -
Extension Manager javascript error 2
I am getting so many errors with DW8 I am not sure what to
do. Everytime I try to open a page, when I try to cut and paste...
Oh my! HELP PLEASE!
Thanks!I also recommend going through this TechNote:
Troubleshooting JavaScript errors in Dreamweaver
http://www.macromedia.com/go/19105
David Alcala
Adobe Technical Support
On Wed, 26 Apr 2006 22:50:00 +0300, "Josie1one"
<joleros[nospam]@yahoo.com> wrote:
>Did you do what Nancy suggested on your previous post?
>Jo
>
>"Cataluna" <[email protected]> wrote in
message
>news:e2ofrg$buu$[email protected]..
>>I am getting so many errors with DW8 I am not sure
what to do. Everytime I
>>try to open a page, when I try to cut and paste...
>>
>> Oh my! HELP PLEASE!
>>
>> Thanks!
Maybe you are looking for
-
How can call a report6i from Forms6i with Parametrs at runtime
Hi, I am using the following code on when button press in forms 6i to call a report with passing parameter from form 6i to report 6i. DECLARE repid REPORT_OBJECT; v_rep VARCHAR2(100); BEGIN repid := find_report_object('status_test'); SET_REPORT_OBJEC
-
Sending mail with excel attachment
Hi I need to send my a mail thru pl/sql procedure wit h an excel attachment I used the elow code. when trying to open the excel getting error in it . can anyone help out create or replace PROCEDURE send_mail_not IS v_mailConn utl_smtp.connection; v_e
-
My iPhone 5c has just begun to play up. When I active the on button it asks you to Slide to Open, however I cannot perform that function. I tried turning it off by holding down the Power Button but when the sign comes saying slide to turn off, I cann
-
Since updating last time Firefox will not open new tabs unless I right click on a link. It won't open them via file or the tab at the top of the brwoser or usinf ctrl + t. Anyone know how to fix this?
-
Is DAQmx and LV 8.0 compatible with vista
I think I know the unfortunate answer but I made some minor (mostly cosmetic changes) to an application previously developed with LV 8.0 daq mx 8.4? (HS-DIO calls) and windows XP. I recompiled under 8.0 and Vista (New daq drivers as well 8.5?) and s