Extension SDK : Where are the wizards for extension creation in JDev

I remember seeing there were few wizards in JDev 10.1.3 Preview version for creating extensions which generates the stubs (like create extension with windows etc.), but I don't see it in the new extension SDK. It only contains extension.xml file with basic properties, also it doesn't XML give insight in the extensions.xml.
Why are the wizards missing? Are they left by mistake oir by intension?
I hope having wizards for extension creation (like eclispe) will help people creating extensions. Currently we have to copy paste some extensions provided by Extension SDK and merge our code as and where required.

Hi,
The Extension Manifest gallery item that's in 10.1.3 production's Extension SDK at least provides a starting point. It will generate extension.xml automatically based on values entered in the creation dialog.
There were a couple of other extension design time features in 10.1.3 preview that were pulled prior to production. This was mainly due to scheduling constraints (a number of other features had higher priority), changes to the extension SDK API between preview and production, and several bugs and design issues with the functionality.
As I mentioned, extension design time support will be expanded in future releases, and is now a priority for us. These improvements are currently targeted for the 11.0 release, but it's not inconceivable that the ESDK for 10.1.3 could be updated with these improvements too if there's enough demand.
Thanks,
Brian

Similar Messages

Where are the drivers for HP LaserJet 5P for Windows 8.1 (64bit)?

Had been using HP LaserJet 5p printer with HP LaserJet 5p printer driver, but had printer disconnect for a few months due to not have black toner. Now I want to use the printer and my control panel does not show HP Laser 5p printer for my tablet but shows it for my laptop. I can not find the driver on the HP support list and the support list does not recognize HP LaserJet 5p.
Where are the drivers for HP LaserJet 5p for windows 8.1 (64bit)??????

Hi,
Basic print drivers are available for the HP Laerjet 5P via Windows Update.
Follow these steps to install the printer drivers on Windows 8.1:
http://h20564.www2.hp.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-c03470332#N100AA
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Where are the bullets for adobe. im creating a document and they are not in the toolbar

where are the bullets for adobe. im creating a document and they are not in the toolbar

ADOBE PRO I JUST GOT IT A FEW MONTHS AGO

Where are the files for the Backups that show up in About This Mac - Storage?

Where are the files for the Backups that show up in About This Mac - Storage?
My new Macbook Pro 13 retina has 1TB flash drive. But despite my TimeMachine being in a TimeCapsule my Macintosh HD shows 277 Gb of space has Backups. What is this for? How can I delete it?

OS X Lion and newer Mac OS X versions create local snapshots in portable Macs if Time Machine is enabled. See > http://pondini.org/TM/30.html
You don't have to worry about. They are stored in a kind of volume named "MobileBackups", but they appear as stored in your hard drive. To delete them, open System Preferences > Time Machine, and turn off Time Machine. Then, turn it on. However, you don't need to delete them, as they will be deleted when your hard drive gets full

Where are the tutorials for Raw files from my Nikon?

Where are the tutorials for Raw files from my Nikon?

These tutorials should how to work in camera raw so you can edit NEFs.
How to make non-destructive edits in Camera Raw | Adobe Photoshop CC tutorials

Where are the instructions for 10.0.2? I am lost

Where are the instructions for the new Garageband10.0.2 version? I am lost & frustrated.

Hi,
Check Out He has a pdf Quickstart guide to GarageBand V 10
OSX (very helpful with Transition (imo)
Below=
http://thegaragebandguide.com
http://thegaragebandguide.com/resources
http://thegaragebandguide.com/osx
*** Below also
This Man is also on You Tube as well (below) and Apple Communities = Hangtime (he is Really Smart ! )
http://www.bulletsandbones.com/GB/GBFAQ.html
http://www.bulletsandbones.com/GB/GarageBand.html
Version 10GB
http://www.bulletsandbones.com/GB/GBFAQ.html
http://www.bulletsandbones.com/GB/PluginsAUEffectsGBv10.html
Best
diamondblues been laid up for awhile due to several surgeries
ready to go now (I hope * )
aka
David

My DVD drive has stopped working. Where are the drivers for HP GH60L?

My DVD/CD drive has stopped working. Where are the drivers for HP GH60L? HP Pavilion Elite HPE-350T.

Hi,
Please try the following first:
http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us
Hope this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I found the manuals. Where are the tutorials for newer Mac Users.

Where are the tutorials for the various Mac Products. I found the manuals but not the tutorials. Thanks..

And if you're coming to the Mac from a PC then this will also help:
http://www.apple.com/support/switch101/

Where are the references for a Website in VS2012 stored?

Hi all,
I have a Visual Studio 2012 solution which contains a few Class library projects and an IIS website. I can add references to the projects, to the website (add reference > solution). But where are the references stored. If you add a reference to a project,
you can open the csproj file and see the path to the project. How can I see the same for a website (not a webapplication, but a website)
Sorry for the messy explanation, and thanks in advance.
Kind regards
Sincerely, Brecht

Hi Brecht,
As far as I know, when we create a website solution, the website project will saved to two places in default in
VS.
For example, when I create a website solution and then location the path like:
E:\WebSite1 in VS IDE.
One website.sln file is default save into the C:\Users\username\Documents\Visual Studio 2013\Projects\WebSite1\
WebSite.sln
In the WebSite1 folder, it includes some Class library projects you created and the website.sln file.
Another website project is saved into the E:\WebSite1 you located path.
So if you want to know find
the references’ store path for a Website in VS2012, I know that after you right click the website project ->Add-> Reference->Solution->Projects, the references will be added into the website.
And then you can right-click the website project->Build web site, the VS will create a Bin folder default to save the references. So you will see the references
in the Bin folder under the web site project. As the same time, it is default that you will find the references like the path: E:\WebSite5\Bin.
Hope it help you!
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I have a 4g classic iPod.Suddenly almost all my games won't play and I get a message to go to the site but there is nothing there for me. Where are the games for my iPod and what has changed to make my games no longer Play?

Most of the games on my iPod classic 4g will not play anymore. I get a message that is of no help and when i synced the games they disappeared. What is going on and where have the games for iPods on iTunes gone ?

Apple removed the clickwheel games from the iTunes Store back in September.
Have you tried a hard reset of the iPod to see if that helps resolve the issue of not being able to play the games? To do this, first make sure the Hold Switch is in the OFF position, then press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
B-rock

Where are the drivers for HP Stream 7 Tablet - 5701na???

It appears that HP have pulled the drivers for the HP Stream 7 Tablet - 5701na.... I downloaded the wireless and BIOS a couple of days ago and stupidly didnt have them locally, now a couple of days later I return to the site and no drivers are listed for this model! Anyone know where I can get these drivers???

Hi: Unfortunately, the support pages are not working for most of the newer HP PC's. It has been that way for about a day now. Since I am not employed by nor do I represent HP, I am not sure when they will have the pages working again. Check back again some other time. With the Independence Day holiday weekend in the USA, I would not expect this to be taken care of immediately.

Where are the LiveDocs for Flex?

I can't find the LiveDocs from Adobe regarding flex development anymore. Where are they gone? A few days ago they were there.
For example the following URL from a Google search regarding E4X:
https://www.google.de/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&cad=rja&ved=0CDkQFjAB&url=h ttp%3A%2F%2Flivedocs.adobe.com%2Fflex%2F3%2Fhtml%2F13_Working_with_XML_01.html&ei=XaawUoWw OK2V7AaPzYEo&usg=AFQjCNHW5gjQwn26e2SYcj3BTNhT64NNIw&bvm=bv.57967247,d.ZGU
When you search with Google all LiveDoc pages are gone and result in an overview page for flex.
Whats that. I think this source of information are very important for flex development.
Why did they do that?

If you're looking for trash sounds, those are located in /System/Library/Components/CoreAudio.component/Contents/Resources/SystemSounds/ . If you're wanting to change the put stuff in trash and empty trash sounds, then follow these steps.
Convert your sounds to aif, save them in some convenient location.
Replace the two sound files *"move to trash"* and *"drag to trash"* inside the Finder and Dock folders, respectively, inside the SystemSounds folder, with the one you want for putting things in the trash and the *"empty trash*" one inside the Finder folder with the new one for emptying the trash.
Ensure that you rename the new ones the same as the originals. (I usually copy the originals and add a .bak suffix so I can restore the sounds to their original condition.)
OPTION-click the Finder's Dock icon and select Relaunch.
Do note that if you'll have to authenticate to copy, rename, and replace these files. I use the Terminal with the sudo command to affect the changes.

Where are the settings for the internal Airport Extreme Card?

Here is my problem.
I have a Xbox Slim. It was connected wirelessly to my old Mac computer which had a external Airport Extreme b/g. Connection worked perfectly and had no issues.
I bought a new computer a iMac with OS X 10.6.7. It comes with a built in Airport Extreme Card that has wireless connection for b/g/n.
I set up my wireless connection on my new computer. We have two iphones and they both connect to the new wireless network with no problems.
When I go to connect my xbox slim it asks me for WEP, which I enter, but when I go to test connection I get a error message. The connection fails between the xbox and my network. Says unable to connect and then gives me a bunch of troubleshooting messages which none seem to work.
Under the IP Settings is says Automatic and has a IP address listed and a Subnet Listed. The Gateway is all zeros.
When I go into the Airport settings the DHCP is turned on.
Now I know my next option is enter the numbers manually which I have tried several times. I don't really know if I'm getting the right numbers or not because its a new iMac and everywhere I search people are getting the IP addresses, router numbers, etc. from PC's or from external routers. I need to get mine from the internal Airport Extreme Card.
I have also read posts for setting your options for Mac Filtering. But I don't know where to adjust these. I don't see any options for configuration for a internal Airport Card.
Where do I adjust the settings for Mac Filtering, Signal Strength, b/g/n, etc?
I know my Xbox's connection is fine because I plug in my old Airport Extreme and it connects just fine. But I don't want to use my old wireless router. I would like to just use the connection that is built into my iMac because it has the 'n' network. Is that even possible?
Any help would be greatly appreciated. Thanks in advance.

ImperialStout wrote:
I don't see any options for configuration for a internal Airport Card.
there aren't any.
check out [this|http://discussions.info.apple.com/message.jspa?messageID=3797169] discussion. it is rather old but the facts remain unchanged.
you might want to have another look @ your airport extreme or get a newer, [refurbished_|http://store.apple.com/us/browse/home/specialdeals/mac/macaccessories?mco=MjEwNzM3NjE] extreme (there currently aren't any) or time capsule. these base station are *simultaneous dual-band* capable, meaning they broadcast on both the 2.4 and 5 GHz bands @ the same time.

Where are the settings for the "open" command, located at /usr/bin/open?

I have Windows XP installed on a partition on my Macbook and I use Parallels to access some of the Windows applications.
When I am in Mac OS X, and I don't even have a virtual machine running, if I enter the following command in the terminal, I get some really strange behavior:
/usr/bin/open -a firefox http://localhost/~myname/somewebpage.html
The open command will launch firefox within Mac OS X and display the page, but, it WILL ALSO TRY TO LAUNCH FIREFOX VIA PARALLELS. So, it starts a Parallels session and tries to launch Firefox. I see the Firefox icon in my dock twice, once normally, and once with the Parallels version of the Firefox icon. But, I cannot view the Parallels instance of Firefox.
In order to debug this, I removed Firefox from Mac OS X (deleted Firefox.app from my applications folder) and I un-installed it from the windows partition using Add/Remove programs in windows.
Now, running the open command as stated above launches Safari in Mac OS X and it still launches parrallels.
Where is the list of application associations that the "open" command uses? I assume there is some incorrect associate that is causing this but, I have no idea how to find it.
Thanks in advance for any advice you can give.

Thank you for your reply.
I actually checked out the man page for "open" but, I was unable to find LaunchServices in the finder. I was hoping there would be some sort of manifest, or application map, within LaunchServices that might be the source of my problem.
Regarding using the full path: Good suggestion. That will clear it up when I use the command line, or if I were writing my own app, etc...unfortunately, I became aware of this problem because Netbeans is using the command in the abbreviated form I posted above (to launch web applications I am debugging), and I can't edit it.
I removed Firefox from both Windows and Mac OS X on my machine, and tested the Netbeans functionality, it launched my application in Safari with no errors. I reinstalled Firefox on my Mac OS X partition and selected it in Netbeans preferences as the browser to use when debugging an app. When I tried to debug an application in Netbeans again, I got the same behavior...parallels launched. Ugh.
There was a folder, on the Windows side of things, called something like Parallels\Shared Applications. It had a shortcut to Firefox in it but, I removed that before doing my testing. I was hoping there would be something similar on the Mac OS X side but, I haven't been able to find anything.
Thank you both for your help. I think I might need to visit the Parallels forums for this one.

Where are the JavaDocs for the Thor.API.Operations.XXClient classes?

I am not seeing any of the JavaDocs for the actual Client classes that should be available for use in OIM. The Interfaces are nice but without documentation of the Client classes we are left to guess how to use the Interfaces.
Has anyone developed some guidelines on how to use the ReportOperationsClient class? I did the following:
Defined all of the inputs for the ReportInput class constructor.
Created the ReportInput instance with these inputs.
Set the stored procedure name.
Created an instance of ReportOperationsClient
Called getPagedReportData with my ReportInput instance.
No luck.

Martin,
I am aware of the documentation location and am looking at the Thor.API.Operations JavaDocs right now.
The Intf Interfaces are all there but there are no JavaDocs for the Clients.
Here is the listing from the JavaDocs:
Interface Hierarchy
Thor.API.Operations.AttestationDefinitionOperationsIntf
Thor.API.Operations.AttestationOperationsIntf
Thor.API.Operations.ConnectorInstallationOperationsIntf
Thor.API.Operations.ErrorOperationsIntf
Thor.API.Operations.GCOperationsIntf
Thor.API.Operations.RemoteManagerOperationsIntf
Thor.API.Operations.ReportOperationsIntf
Thor.API.Operations.TaskDefinitionOperationsIntf
Thor.API.Operations.tcAccessPolicyOperationsIntf
Thor.API.Operations.tcAdapterOperationsIntf
Thor.API.Operations.tcAuditOperationsIntf
Thor.API.Operations.tcDeploymentUtilityOperationsIntf
Thor.API.Operations.tcEmailOperationsIntf
Thor.API.Operations.tcEntitlementsOperationsIntf
Thor.API.Operations.tcExportOperationsIntf
Thor.API.Operations.tcFormDefinitionOperationsIntf
Thor.API.Operations.tcFormInstanceOperationsIntf
Thor.API.Operations.tcGroupOperationsIntf
Thor.API.Operations.tcHelpOperationsIntf
Thor.API.Operations.tcImportOperationsIntf
Thor.API.Operations.tcITResourceDefinitionOperationsIntf
Thor.API.Operations.tcITResourceInstanceOperationsIntf
Thor.API.Operations.tcLocationOperationsIntf
Thor.API.Operations.tcLookupOperationsIntf
Thor.API.Operations.tcObjectOperationsIntf
Thor.API.Operations.tcOrganizationOperationsIntf
Thor.API.Operations.tcPasswordOperationsIntf
Thor.API.Operations.tcPermissionOperationsIntf
Thor.API.Operations.tcPropertyOperationsIntf
Thor.API.Operations.tcProvisioningOperationsIntf
Thor.API.Operations.tcQueueOperationsIntf
Thor.API.Operations.tcReconciliationOperationsIntf
Thor.API.Operations.tcRequestOperationsIntf
Thor.API.Operations.tcRulesOperationsIntf
Thor.API.Operations.tcSchedulerOperationsIntf
Thor.API.Operations.tcUserOperationsIntf
Thor.API.Operations.tcWorkflowDefinitionOperationsIntf
Here is a listing from the Jar file:
[bea@xxxxxxxxx lib]$ jar tf xlAPI.jar | grep Thor | grep API | grep Operations
Thor/API/Operations/
Thor/API/Base/tcUtilityOperationsIntf.class
Thor/API/Operations/AttestationDefinitionOperationsClient.class
Thor/API/Operations/AttestationDefinitionOperationsIntf.class
Thor/API/Operations/AttestationOperationsClient.class
Thor/API/Operations/AttestationOperationsIntf.class
Thor/API/Operations/ConnectorInstallationOperationsClient.class
Thor/API/Operations/ConnectorInstallationOperationsIntf.class
Thor/API/Operations/ErrorOperationsClient.class
Thor/API/Operations/ErrorOperationsIntf.class
Thor/API/Operations/GCOperationsClient.class
Thor/API/Operations/GCOperationsIntf.class
Thor/API/Operations/RemoteManagerOperationsClient.class
Thor/API/Operations/RemoteManagerOperationsIntf.class
Thor/API/Operations/ReportOperationsClient.class
Thor/API/Operations/ReportOperationsIntf.class
Thor/API/Operations/TaskDefinitionOperationsClient.class
Thor/API/Operations/TaskDefinitionOperationsIntf.class
Thor/API/Operations/tcAccessPolicyOperationsClient.class
Thor/API/Operations/tcAccessPolicyOperationsIntf.class
Thor/API/Operations/tcAdapterOperationsClient.class
Thor/API/Operations/tcAdapterOperationsIntf.class
Thor/API/Operations/tcAuditOperationsClient.class
Thor/API/Operations/tcAuditOperationsIntf.class
Thor/API/Operations/tcDeploymentUtilityOperationsClient.class
Thor/API/Operations/tcDeploymentUtilityOperationsIntf.class
Thor/API/Operations/tcEmailOperationsClient.class
Thor/API/Operations/tcEmailOperationsIntf.class
Thor/API/Operations/tcEntitlementsOperationsClient.class
Thor/API/Operations/tcEntitlementsOperationsIntf.class
Thor/API/Operations/tcExportOperationsClient.class
Thor/API/Operations/tcExportOperationsIntf.class
Thor/API/Operations/tcFormDefinitionOperationsClient.class
Thor/API/Operations/tcFormDefinitionOperationsIntf.class
Thor/API/Operations/tcFormInstanceOperationsClient.class
Thor/API/Operations/tcFormInstanceOperationsIntf.class
Thor/API/Operations/tcGroupOperationsClient.class
Thor/API/Operations/tcGroupOperationsIntf.class
Thor/API/Operations/tcHelpOperationsClient.class
Thor/API/Operations/tcHelpOperationsIntf.class
Thor/API/Operations/tcITResourceDefinitionOperationsClient.class
Thor/API/Operations/tcITResourceDefinitionOperationsIntf.class
Thor/API/Operations/tcITResourceInstanceOperationsClient.class
Thor/API/Operations/tcITResourceInstanceOperationsIntf.class
Thor/API/Operations/tcImportOperationsClient.class
Thor/API/Operations/tcImportOperationsIntf.class
Thor/API/Operations/tcLocationOperationsClient.class
Thor/API/Operations/tcLocationOperationsIntf.class
Thor/API/Operations/tcLookupOperationsClient.class
Thor/API/Operations/tcLookupOperationsIntf.class
Thor/API/Operations/tcObjectOperationsClient.class
Thor/API/Operations/tcObjectOperationsIntf.class
Thor/API/Operations/tcOrganizationOperationsClient.class
Thor/API/Operations/tcOrganizationOperationsIntf.class
Thor/API/Operations/tcPasswordOperationsClient.class
Thor/API/Operations/tcPasswordOperationsIntf.class
Thor/API/Operations/tcPermissionOperationsClient.class
Thor/API/Operations/tcPermissionOperationsIntf.class
Thor/API/Operations/tcPropertyOperationsClient.class
Thor/API/Operations/tcPropertyOperationsIntf.class
Thor/API/Operations/tcProvisioningOperationsClient.class
Thor/API/Operations/tcProvisioningOperationsIntf.class
Thor/API/Operations/tcQueueOperationsClient.class
Thor/API/Operations/tcQueueOperationsIntf.class
Thor/API/Operations/tcReconciliationOperationsClient.class
Thor/API/Operations/tcReconciliationOperationsIntf.class
Thor/API/Operations/tcRequestOperationsClient.class
Thor/API/Operations/tcRequestOperationsIntf.class
Thor/API/Operations/tcRulesOperationsClient.class
Thor/API/Operations/tcRulesOperationsIntf.class
Thor/API/Operations/tcScheduleTaskOperationsClient.class
Thor/API/Operations/tcScheduleTaskOperationsIntf.class
Thor/API/Operations/tcSchedulerOperationsClient.class
Thor/API/Operations/tcSchedulerOperationsIntf.class
Thor/API/Operations/tcUserOperationsClient.class
Thor/API/Operations/tcUserOperationsIntf.class
Thor/API/Operations/tcWorkflowDefinitionOperationsClient.class
Thor/API/Operations/tcWorkflowDefinitionOperationsIntf.class
As I described in my original post, and as you can plainly see, there is a Client class that is the "worker" class for each of the Interfaces. Without these worker classes, we would be at our own devices to determine how to implement these Interfaces, so I am thankful they are being provided, but the issue is that I am needing documentation for them, since specifically the ReportOperationsClient does not seem to work based on my interpretation of the Interface.
Thanks for your interest. If the source code for the Operations Clients does not have embedded JavaDocs, that would explain the issue. In that case I would need to have the source code so I can troubleshoot the issues I am having with this class. I opened an SR Friday but have not had any response yet.

Extension SDK : Where are the wizards for extension creation in JDev

Similar Messages

Maybe you are looking for