Extensions (Add-ons) shown in Extension manager are not in Photoshop cc 2014

I started with Photoshop cc and downloaded several Add-ons which I used, particularly Adobe Watermark. When Photoshop cc 2014 was released we realised that the majority of these Add-ons would not work in this new edition of Photoshop. Consequently I have to also run Photoshop cc as well to allow me to use these Add-ons.
If I open Adobe Extension Manager, and select under Products I see a list of all the Add-ons that work in Photoshop cc, which is correct. However if I select Photoshop cc 2014 I see a long list ( 16 Add-ons) which have enabled ticked by the side of the name. Only 5 of these actualy show  in Photoshop cc 2014, so something is wrong here.
I assume that Adobe Watermark is an Adobe product, so when are Adobe going to sort this out, and the problem in Adobe Extension Manager?

Flash based extensions are not supported by PS CC 2014 anymore. Please refer to http://blogs.adobe.com/photoshopdotcom/2014/04/photoshop-spring-cleaning.html, http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html
And http://blogs.adobe.com/crawlspace/2014/06/2014-release-of-photoshop-cc-faq.html#plugins (scroll down to "Why don’t my 3rd Panels show up in the 2014 release of Photoshop CC? What happened to Oil Paint, Mini-Bridge & Kuler?”)
If some extensions are not supported by PS CC 2014, you have to continue to use them in PS CC until their HTML based counterparts become available.

Similar Messages

  • When "reset" used-are the EXTENSION add-ons saved-not plugins

    Started Firefox and a pop up from Mozilla asked if I wanted to speed up starting time because it was slow opening. There was a suggestion to use reset. I already knew that feature was available but I didn't want to set it to "factory settings" when I have very many extension addons, the options are set like I want, and the program runs fine after it starts. I didn't see where "extension add-ons" were kept inside the profile. I want to know if all the EXTENSION ADD_ONS are saved anywhere, or will I have to find and reinstall all of them again??

    Did you try the suggestions here?
    *https://support.mozilla.org/en-US/kb/firefox-takes-long-time-start-up
    See this article about information about the Firefox profile folder:
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    When you reset Firefox then a new profile is created and some personal data (bookmarks, history, cookies, passwords, form data) is automatically imported and the current profile folder will be moved to the desktop to an "Old Firefox Data" folder.
    Installed extensions and other customizations (toolbars, prefs) that you have made are lost and need to be redone.
    It is possible to recover data from the old profile, but be cautious to avoid carrying over problems.
    *https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • After updating to v. 24.0 (and restarting) ALL add-ons (regardless whether they work or not) are marked "(disabled)", and clicking Enable button does nothing

    After updating to v. 24.0 (and restarting, several times) ALL add-ons (regardless whether they work or not) are marked "(disabled)". I tried clicking "Enable" button for each add-on and nothing happened. There is only one add-on which is marked as incompatible with this version (but it was also incompatible with previous version, and so marked).
    Clicking "Update Add-ons", gives a short list of add-ons but "Install Updates" button is pale and doesn't work. I can only sort list by name or last update.
    Also, I disabled Ask Toolbar and that went well. When I click "Enable" button (button works ONLY for this add-on) it takes forever to get note: “Ask Toolbar will be enabled after you restart Firefox”, I used to get this info in seconds time before this update. (I do not really want Ask Toolbar, I just used it to see whether if I disable and then enable an add-on might do the trick.)
    Bottom line – I can not tell if add-on works (i.e. if it is enabled or disabled) unless I try using it.
    Even when I posted this question and installed Troubleshooter, it's also marked as "(disabled)"

    You're welcome
    Are this screenshots from an extension window because the built-in about:addons page looks different?

  • The add ons i want to use are asking me to be able to continue to sign a liscense agreement...i dont know where they are to be able to sign them...one of the is WIRED-MARKER and the other is JUREEKA...thanx for the help

    Question
    the add ons i want to use are asking me to be able to continue to sign a liscense agreement...i dont know where they are to be able to sign them...one of the is WIRED-MARKER and the other is JUREEKA...thanx for the help edit
    Details

    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

  • Postings to G/L accounts with open item management are not permitted Messag

    HI All,
    Me activiated New GL. and when I am trying to post the
    document, I am getting the below error.
    The GL used 200100 is Cash A/c (40)
    Cr Eq Share Capital A/c (50)
    As Cash A/c requires Clearing, I have activated "Open Item Management".
    Can you advice me why Its giving me the below mentioned error.
    Thanks
    Postings to G/L accounts with open item management are not permitted
    Message no. FAGL_POST_SERVICE012
    Diagnosis
    You use G/L account 200100 in company code RLIF with open item
    management. However, postings are not permitted to G/L accounts in
    individual ledgers with open item management.
    Procedure
    If you have not yet made any postings to this account and if the
    account is to be used for closing processes in non-leading ledgers,
    deactivate the Open Item Management indicator in the company code data
    for the G/L account.
    Thanks,
    Niranjan Yandamuri

    Hi,
    Please, refer to note 1646466 for the info on this message.
    Regards,
    Eli

  • Postings to G/L accounts with open item management are not permitted

    Dear all,
    i am getting one error FB01L ledger specific posting  for ledger group L2 ledger (IFRS) error is "postingst o GL accounts with open item management are not permitted " i am posting both gl accounts  are balance sheet  account, please help me how to resolve the problem .
    Message no. FAGL_POST_SERVICE012
    Reregards
    rajashekhar

    Dear all,
    Thanks for reply, The error message appears FAGL_POST_SERVICE012 because it is generally not permitted to use the O/I managed account as an adjustment account.It is not possible to post on Individual Ledger (on a Leading or non-leading) on OI Account. This is for your informations
    We want to post ledger specific for L2 ledger  i am getting above error can help me how to sovle the problem , otherwise any alternaitve solution for posting  L2 Ledger

  • Posting to gl a/c with open item management are not permitted.

    hello,
    When i run FAGL_FC_VAL it display the report and generate the batch input session.
    But when i run the session the error massage appear -
                "posting to gl a/c with open item management are not permitted."
    When i post the same gl mannually, it doesn't show any error.
    The Same Problem appear when i run the session generated from FAGLF101- the regrouping program.
    Can any body give some idea, what should be done.
    Thanx
    Subodh

    Hello this is chandu,
    When u run the fc val it posts the ex gain or loss to  respective a/cs.Means those a/cs are not B/S a/cs.Only B/S a/cs we select open item management which r require to maintain on OI management basis.
    So try to maintain other a/cs for ex gain and loss y bcoz once u post any transaction in those a/cs which r created already on O Item mgnt basis u cannot change that again.
    Then assign those a/cs to automatic postings and run the rc val again
    May it will be useful to u
    Thank u

  • FB50L error: Postings to G/L accounts with open item management are not permitted

    Dear All
    I need your help.
    I am trying to do some adjustment to GR/IR clearing account in Non-leading ledger. Since for this account open item management is ticked, I am getting an error message 'Postings to G/L accounts with open item management are not permitted'.
    Now I have checked the forum to find some solution...but does not fit my requirement.
    I cannot create a new account. I cannot change the existing account. I tried OBA5, but the message persists.
    I also checked the notes.
    Appreciate a response on how the post to open item managed accounts in non-leading ledger.
    Regards
    Kunaal

    Hi Kunaal
    Usually, OIM accounts are not allowed for Non Leading Ledger postings... With EhP4 or 5, i guess, a new feature is added in GL Master whereby you can specify that a GL will be OIM for Leading Ledger and Not OIM for a Non Leading Ledger
    Regards
    Kavita Agarwal

  • ASKBN - Postings to G/L accounts with open item management are not permitte

    Hi All!
    I have a problem: I run the transaction ASKBN (periodic asset postings) and receive the message about error: "Postings to G/L accounts with open item management are not permitted".
    Please let me know how correctly run the transaction?
    Thank.

    Hi,
    if you would have posted this information with your opening post, it would have been more helpful. How should the community know this detail?
    Regards,
    Markus

  • Postings to G/L accounts with open item management are not permitted in ASKB

    Hi Gurus,
    I have the error FAGL_POST_SERVICE012 'Postings to G/L accounts with open item management are not permitted' when i run the transaction ASKB. The very strange thing is that in table APERB_ITEMS for this company code there isn't any record. My questions are:
    1. The ASKB posts only if the APERB_ITEMS is populated?
    2. If yes, Why the ASKB wants to create postings on this company code?
    3. If no, which are the logic  conditions that include a asset in the ASKB execution?
    4. If the logic is correct, how i can to run the ASKB on OI accounts?
    Thanks in advance,
    Best Regards,
    Emanuele

    Hi ,
    I believe you know why do you run transaction code ASKB if not please see below
    The report evaluates all asset transactions since the last run. Unlike the periodic depreciation posting program, the APC posting run is not tied to a certain accounting period. It generates one document per posting period and depreciation area. That means that asset values are summarized for various account groups in one document. Document number assignment is external. You have to enter the document type in Customizing for Asset Accounting.
    There are various possible ways of posting APC values:
    To an account set within the original company code
    To an account set of an alternative company code
    To an account set directly in a special ledger
    The account set can be determined from a different depreciation area.
    Derived depreciation areas can be treated as real depreciation areas. This means that the system posts APC differences rather than special reserves, as was the case up to now.
    During a test run, the system completes all accounting checks (for example, budgetary control of objects belonging to Funds Management).
    While doing above system reads and update table APERB_ITEMS . If you look to Program for ASKB is RAPERB2000  and if you take your ABAper help to under the coding he will tell you  that is program use APERB_ITEMS to update  and read.
    MANY THANKS
    REGARDS
    Preeti Agarwal

  • On my ipad3, the Skype IM is not running. All msgs i send are shown as "pending" and are not being sent out.

    On my ipad3 skype IM is not running. The msgs are shown as "pending" and are not going out.
    Also i could earlier send sms to mobiles from skype. Now that facility has dissapeared from teh menu.
    Very thankful for any help.

    You both backup your iPhones on the same Apple ID, so when she restore her iPhone it pulled the data from the last backup (your iPhone).  She would need to erase her iPhone and restore from her back up. Take a look at this link in the restore section, http://support.apple.com/kb/HT4859

  • Extenstion manager CC not see photoshop

    Extenstion manager CC not see photoshop and i cant setup plugin cut and slice cutandslice.me (xml error)
    I have trial CC photoshop. What i do wrong?

    windows 8.1, i tried reinstall all adobe programs again, and before it deleted with revo uninstall all of it, but bug is here still...
    Result: BridgeTalk Diagnostics
      Info:
      Name = estoolkit-4.0
      Status = PUMPING
      Path
      Version = 2.0
      Build = ES 4.5.5
      Next serial number = 18
      Logging: = OFF
      Now = 14:08:55
      Messages:
      Message Version = 2.05
      Authentication = ON
      Digest = ON
      Thread: estoolkit-4.0#thread
      Avg. pump interval = 32ms
      Last pump = 89ms ago
      Ping: 7
      ECHO_REQUEST: ECHO_RESPONSE
      Timeout = undefined
      Handler = undefined
      STATUS: PUMPING
      Timeout = undefined
      Handler = undefined
      MAIN: MAIN
      Timeout = undefined
      Handler = installed
      LAUNCHED: LAUNCHED
      Timeout = undefined
      Handler = installed
      DIAGNOSTICS: DIAGNOSTICS
      Timeout = undefined
      Handler = installed
      INFO: INFO
      Timeout = undefined
      Handler = installed
      SETUPTIME: thread=0ms, left=0ms
      Timeout = undefined
      Handler = undefined
      Instances: 3
      estoolkit-4.0#dbg:
      msg[14:08:54]: 00000013
      @BT>Version = 2.05
      Target = estoolkit-4.0#dbg
      Sender = estoolkit-4.0#dbg
      Sender-ID = localhost:win7520
      Timeout = 14:08:55
      Type = Ignore
      Response-Request = Timeout
      Headers = (no headers)
      Timestamp = 14:08:54
      Serial-Number = 13
      Received = undefined
      Result = undefined
      Error = undefined
      Body = (empty)
      Incoming: 1
      Outgoing: 0
      Handler: 9
      ExtendScript = for all messages
      Error = for only msg #3
      Error = for only msg #5
      Error = for only msg #9
      Result = for only msg #13
      Error = for only msg #13
      Timeout = for only msg #13
      Result = for only msg #15
      Error = for only msg #15
      estoolkit-4.0#estk:
      msg[14:08:54]: 00000015
      @BT>Version = 2.05
      Target = estoolkit-4.0#estk
      Sender = estoolkit-4.0#dbg
      Sender-ID = localhost:win7520
      Timeout = 14:18:54
      Type = Debug
      Response-Request = Result Error
      Headers = (no headers)
      Timestamp = 14:08:54
      Serial-Number = 15
      Received = undefined
      Result = undefined
      Error = undefined
      Body: 107 bytes
      Text = <get-properties engine="main" object="$.global" exclude="undefined,builtin,prototype" all="true" max="20"/>
      Incoming: 1
      Outgoing: 0
      Handler: 1
      ExtendScript = for all messages
      estoolkit-4.0: (main)
      Incoming: 0
      Outgoing: 0
      Handler: 1
      ExtendScript = for all messages

  • Extensions/add ons not appearing in photoshop cc2014

    Hi,
    I've been downloading add ons/ extensions especially for photoshop and i'm not able to see ANY of them in the window-->extensions submenu.
    Does someone have the same problem?
    Thanks

    Are you sure the extensions you have download are versions for CC 2014.  Adobe removed Flash Panel support in CC 2014 many extensions developed for Photoshop CC and prior used Flash Panels they needed to be update to use html panels in CC 2014.

  • Cannot enable extension/add-ons

    Every time i run Firefox it prompts me to grant the extension/add-on installation. Currently I have McAffe ScriptScan for Firefox 15.1.0 & LastPass 3.1.54 add-ons prompting for installation. When I allow the installation of these add-ons it is required that i restart firefox, so when I do, again it will ask me to allow the installation of these add-ons only now the tabs have doubled, if I continue I will be stuck in an infinite loop of this prompts.
    I have tried resetting add-ons and firefox, deleting profiles creating new profiles even a fresh install of firefox after completely removing it(even the follder on \appdata\), this problem continues.
    I would really appreciate a solution to this problem, since I love Firefox and this is getting very annoying.
    Thank you in advance.

    It's not an ideal solution, but you could download the portable version of Firefox and use that. As long as the IT guy doesn't have policies in place to prevent it from running.

  • Extension manager gray out in Photoshop CC 2014

    After installing and then uninstall and reinstalling Photoshop CC 2014, the Extension Manager remains grayed-out.  I've also Uninstall and Reinstall the Extension Manager--all to no avail. I'm running OS X 10.9.3
    Solutions? Thoughts?
    Stephen

    2014 release of Photoshop CC: FAQ

Maybe you are looking for

  • Duplicate an item

    Dear friends, I have a problem trying to duplicate say an Image on Canvas. Simply, click on image would duplicate it and then drag it somewhere else on Canvas. How can i accomplish this. Thanks in advance. Mika

  • How do I DISABLE icon previews of PDF's on the Desktop only? Windows 7

    Acrobat Pro XI Windows 7 Professional My desktop icons USED to show only the standard PDF icons, now I have a MIX of them - some are previews (which I dislike) and some are standard. I've searched for hours and had zero success.  I tried changing jus

  • Watching the accumulative credit of a vendor

    I'm searching for a report that produce the accumulative credit of a vendor/ I mean something like fbl1n but the sum column has to be like that: if fl1n give the 3 line: vendor         sum 50051          100 50051          150 50051          -30 than

  • Build stored procedure from a dynamic SQL query

    I have the following method, that receives a string from a textbox and creates a dynamic select command. Since I am using a dataSet I cannot execute a dynamic SQL query by calling a method of a strongly-typed dataset (.xsd). I have been told that the

  • Smartform Printing Problem After - Sign

    I have some strange problem in Smart forms. Actually I am printing PO Number in Invoice layout and its printing normally . But If Po Number Value Like 1-234567 or ABC-234 then its printing only 1 or ABC. Means after - sign its not printing any thing.