Extensions disappear after workspace change

I changed my workspace and now all my extensions have disappeared. Server Behaviors, menus, tag behaviors, all gone. The Extension manager still shows them all as installed.
Why did they disappear and is there a way to get them back that does not involve reinstalling every one of them? Perhaps a way to force a refresh of what is installed?
I deleted the cache file and that did not make a difference.
Any help appreciated.
Steven

Well, I didn't just let it, I told it to update. I was pretty well backed up, but the problem was not immediately visible to me.
I basically did just what your link suggests. I re-enabled all the extensions. Some failed and I re-installed those. Some were missing, and I had to find those.
The of course is the pain of activating all those extensions.
I found that my configuration folder must have been read as corrupt. It was renamed Configuration-1 and a new one created. Every time I tried to fix it, it still did not like my old one and renamed it again.
Once the tech support person realized the depth of the problem he asked me to hold for a minute. 94 minutes later, I was disconnected.
I used the time to fix the problem myself. It only took about an hour after disconnection to complete.
After that I received a support incident by email. It asked me to respond to an incident that had no information and just said "How to issue" I responded with, "WTF! respond to what?" followed by the information I shared here and a bit about my lost time.

Similar Messages

Why is it that the Facetime icon disappeared after i changed my sim from qatar vodafone number to philippines smart number? How can i reactivate my facetime?

Why is it that the Facetime icon disappeared after i changed my sim from qatar vodafone number to philippines smart number? How can i reactivate my facetime?

Check to see if you have an old phone number associated with this person in your address book. When you call someone on Facetime it calls ALL numbers/emails associated with that persons contact sheet! This was my problem, this stranger has my husband's old phone number!

All (nearly) add-ons / extensions disappear after update to v15 then v16

This has happened to me twice now. After a FF update (first to v15?) all or most add-ons / extensions disappeared, didn't even appear in the menus. (At least I am sure my critical extensions (see below) were missing earlier. It has been awhile.) After trying the solutions posted in various topics I finally gave up and created a new profile. I installed my more critical add-ons, Firebug, Flash Firebug and Restartless restart. Everything was fine until the latest update to 16.0.1. Once again all add-ons disappear, including from the menus. Curiously "clear recent history" also seems to have been missing until I deleted the extension and compatibility files.
Going back to my previous profile, after deleting the extension and compatibility files and reloading FF I see that some add-ons now appear but not my critical ones.

@cor-el,
So... With FF closed I deleted localstore.rdf, compatibility.ini, extenstions.* and addons.* files. Start FF, the files rebuild. No extensions appear so no change.
As a test I created a new profile and added extensions and of course, everything worked fine. Then I got slightly smart and restored the entire profile (and just that profile) from a backed up version before the FF update. Everything works again!
Conclusion: Something in the FF update process corrupted something other than the files we discussed above causing (nearly?) all add-ons to not work. So far it appears that whatever the update changed in the profile was not needed as restoring an older profile version seems to work fine.

Roboform toolbar disappears after persona changes

When FF starts up and the persona changes (such as with Personas Rotator), the Roboform toolbar disappears. When you retrieve it using Right-Click > Customize, personas can now change and the toolbar won't go away. Any way to make this annoyance go away?

The default Mozilla theme is basically that persona that looks like one those devices used by painters to color their brushes (I think the persona's name is "caramel"). I don't like it and always use another persona.The only issue is that for some reason when you change it the first time, the Roboform toolbar disappears. When I go to Options -> Toolbar Layout and put it back, then it stays put no matter how many times the persona changes or rotates. It's just irritating having to put it back every time you start FF. Any clues?

HDD disappear after ownership change

Hi!
Made some changes in ownership/permissions my second hdd to be visible for the second user. Remember that i gave ownership for "admin". First it wont to change new perm. and after gave me some error. I closed Get info and after restart the computer and second hdd bacame invisible. Disk Utility can see it, in OS 9 is visible, not in Tigers desktop. Did a try with File Budy - find invisibles, nothing.
Help!

It does not matter if you are logged in as an administrator - if the volume/partition is owned by another user and the permissions are set to "no access by others", then the drive will not mount. You will need to check/change the permissions from the account that owns it, or use a script as the super user to force the volume/partition to mount.

JXTreeTable Column Control disappears after each change

I'm trying to set up a column control component within a JXTreeTable. It works perfectly fine, but when you select a column to hide/show, the list closes, and you have to open it again to select another column to hide/show. Is there a way to set it so the control component stays visible while the user makes multiple selections?

The way to go is implementing a custom ColumnControlPopup - that's the controller which vends the component to show after clicking on the corner button. Instead of vending a JPopupMenu (which is the default), provide something else, f.r. a JXList. Slightly awkward, as for doing so you need to subclass the ColumnControlButton ... ehem ...
My (kleopatra) section in the jdnc-incubator has examples (in package something.table) for custom column controls
HTH
Jeanette

Files are disappearing after making changes in Camera Raw

I have lost multiple files, and I have no idea what the rhyme or reason is. There are random photos that are missing out of my folders. If anyone has any knowledge about this, I would greatly appreciate it. Thank you all for your time!

Meghan,
What OS, version of Photoshop, ACR, etc?
Make sure you are running the latest version of Bridge, especially.

My ringtone disappeared after I changed my apple ID and password. How do I retrieve it?

Where does one go to "reinstall" a ringtone?

you have to go to the itunes store with your old apple id and password and look in purchased apps

Changes made in a Custom Program disappears after save.

Hi,
I made some changes to a report program.
But the changes has been disappears after saving the report.
This is really strange thing I come across.
Please help me out here.
Cheers,
Sam

This is really strange.
Have you compiled and activate the program.
Maybe you're working with a different version. Look at version management.
regards,
Hans
Please reward all helpful answers !!!!!

Config of CIP disappear after change IOS.

Hi, folks!
We have 7507 with two RSP16 and two CIPs (code cip27-22).
After I change IOS of our 7507, from (RSP-JSV-M) Version 12.1(13)E1 to 123(11)T3, with sh run, we looked that our CIPs disappeared.
The cfg of CIPs are in startup-config.
After the change of IOS and did a reload or after I did turn off an turn on, does not return to running- config. The CIP cfg only return to cfg with the old IOS.
I need to change the IOS because I would like to use GLBP feature.
Exist any document/paper with method to change IOS of 7507 with CIP.
What was my mistake?
thanks,
Renato

Hi,
when you change major ios versions you also need to change the corresponding cip microcode. If you go to 12.3T you need to use cip microcode 28. the current one is cip28-20.
You can download it from cco. Try if this link works for you:
http://www.cisco.com/kobayashi/sw-center/interworks/cip/
the cip will only work if ios and cip microcode match. You need to copy the cip microcode into flash memory on the router and then reference the location and name in a statement similar like this:
microcode CIP flash slot1:cip28-20
microcode reload
show microcode will also show you what the default cip microcode for this release is. You can see with this command what cip release you need. i.e cip 28, cip27...
thanks...
Matthias

Pictures in iWeb albums disappeared after change location of original files

I created many albums in iWeb by dragging albums from iPhoto. But then I noticed some pictures from my iWeb albums disappeared after the original pictures got removed to another location (or deleted). How can I tell iWeb to make a copy of the pictures in iWeb itself so my iWeb albums can stay the same even when i need to reorganize the original files on the hard drive?
Any suggestions on how to restoring my albums in iWeb? I am having a bit headache now. Thank you very much!

That is not normal behavior. The photos should stay in iWeb even if you delete them from iPhoto. Are you running a "referenced" library or a "managed" one?
Click to view full size
Managed is the default option. If you're running a reference library that may be the reason. If so contact Apple via http://www.apple.com/feedback/iweb.html and http://www.apple.com/feedback/iphoto.html.
Unless you have a backup of your domain file predating the loss of the photos I don't know how you will recover the photos.
OT

Aperture 3.2.4 macbookpro lion: image disappears after loading from any project; repairing everything on starting app doesn't fix it. Only restarting the computer works. Any help, please? ... in non-technical language please. Thanks

aperture 3.2.4, macbookpro lion: image disappears after loading from any project; repairing everything on starting app doesn't fix it. Only restarting the computer works. Any help, please? ... in non-technical language please. Thanks

“Hi Kirby, thanks a lot for your answer.
I got one answer, from DMoore, saying:
“Try Safe boot and then restart with only Aperture open. Still doent work write back with more details like Ram, HD capacity/free space. Are these thumbnails or Previews? Have you turned off building previews in AP preferances?
Safe boot http://support.apple.com/kb/HT1564
Starting up into Safe Mode does several things:
1 It forces a directory check of the startup volume.
2 It loads only required kernel extensions (some of the items in /System/Library/Extensions).
3 In Mac OS X v10.3.9 or earlier, Safe Mode runs only Apple-installed startup items (such items may be installed either in /Library/StartupItems or in /System/Library/StartupItems; these are different than user-selected account login items).
4 It disables all fonts other than those in /System/Library/Fonts (Mac OS X v10.4 or later).
5 It moves to the Trash all font caches normally stored in /Library/Caches/com.apple.ATS/(uid)/ , where (uid) is a user ID number such as 501 (Mac OS X v10.4 or later).
6 It disables all startup items and login items (Mac OS X v10.4 or later).
7 Mac OS X v10.5.6 or later: A Safe Boot deletes the dynamic loader shared cache at (/var/db/dyld/). A cache with issues may cause a blue screen on startup, particularly after a Software Update. Restarting normally recreates this cache.”
As I don’t know much about the technical aspects of computers, I don’t really understand the first answer, and it sounds like following it might produce unwanted changes.
But I understand your questions, so I’ll try to answer them;
"loading from any Project" means that I encounter the problem when I’m using a project, possibly after/because I’ve left the Mac on overnight, and/or I’ve made a lot of adjustments, and, once the problem is there, it happens in any other project which I open – the images load then disappear.
I can see images in the Browser, so it only happens in the Viewer(s).
I’m afraid I don’t understand what you mean by: “If you select "Photos" from near the top of the Library tab of the Inspector, does it show you all of your Images?”. I am a newcomer to Aperture, so I don’t know what some of the buttons are for yet, but when I want to look at and adjust my pictures, I import them, as referenced images, then Aperture creates a folder/project in the Library. When I click on that Project (when it’s working properly), all the images appear in the Browser or the Viewers – without me needing to “select Photos from near the top of the Library tab of the Inspector”. I selected it and looked at all the items in the dropdown menu, but none of them seems to offer the option to ‘show all the images’. So I’m not sure how to answer your question except to say that – yes, I can see all the pictures in the Browser or the Viewers (when it’s working properly), but I don’t seem to need to use the Photos button to achieve this.
Did Aperture work before?
Yes it worked ok for a while, but I only purchased it on 24th May.
If I understand correctly, the difference between thumbnail and preview is that the thumbnail is what I see when the “Loading” wheel is turning, and the disappearance of this wheel after a few seconds means that I am now looking at the preview (also, the thumbnail cannot be adjusted).
So I think the problem occurs when the thumbnail has finished loading; the viewer going blank/grey might mean that it is not showing the preview.
But I have not changed the default Preview settings in Aperture Preferences.
My macbookpro details:
2.7 Ghz Intel Core i7
Memory: 8 Gb 1333 MHz DDR3
Hard Drive capacity 499.25 GB
Available 387.36 GB
I have noticed another problem: I cannot apply the same rating to multiple images: following the instructions, I select a group of contiguous (or non- contiguous) images, choose a selection eg “5stars” using the keyboard, but the stars only appear in the last selected image – even though all the images are still showing as selected.”
I hope this helps you to understand more.
Thank you for trying to help me.
Tony

DNS Host(A) records disappear after a while

Hi all,
a few weeks ago we started to change the TCP/IP configuration of our printers from "static" to DHCP with reservations. The DHCP server is configured to register forward Host(A) and reverse PTR record on DNS on behalf of (all) clients, both are W2K3 with SP2.
This works well for all our Toshiba printers/copiers and most of our HP printers. However, on a handful of HP printers the Host(A) record in the DNS zone get lost / disappeard after some time, leading into a non working name resolution. But only the Host(A) record, the reverse PTR record is still there. Currently we have this issue with Business InkJet 2800 attached via a JetDirect J3258G to our network.
In the past we noticed, that on another printer the Host(A) record re-appears after some hours, only to disappear after a while again. These intervals last some hours up to one day, but seem to follow no period or schedule, like DHCP lease time, DNS scavening etc.
I have intentionally not "listed" all the technical details in this first post. However, if you need specific details I will be happy to share them.
Any hint or comment is appreciated
regards

This is by design.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/afd3c338-1706-4898-b269-550c018073c0/dns-entry-for-dc-not-dynamically-updating-server-2008-r2?forum=winserverDS
http://social.technet.microsoft.com/Forums/windowsserver/en-US/ed97a286-d884-43d6-87e2-5cd5e59cfe9a/windows-2008-r2-domain-controllers-and-static-dns-entries?forum=winserverNIS
Please take a moment to Vote as Helpful and/or Mark as Answer where applicable. Thanks.

Crystal Report (RDC) doesn't print correctly, after Printer change ?

There are problems with the page format and the color settings for the new printer !
It should be resolved with ADAPT01104291 FixPack3.8
Description: Crystal reports may not print properly after users change printers by using the SelectPrinter command from the Report Designer Component (RDC). The cause of the problem is that the incorrect DEVMODE structure size is allocated to the print job.
We are using CRXI_R2_SP5_Upgrade: ProductID=11.5.11.1470.2.26.Patch
but we still have the problems !

Hello Don, thank you for your extensive answer. The PCL printer of HP is not the trouble maker. The problem is obviously replicable with any other Printer Driver (Espon/Sharp/Kycocera a. s. o.) I only installed this PCL Printer Driver of course you mentioned it in your example before.
Okay, let's talk about the Devcap-Program and there Information about the paper source of a printer. Even in Visual Basic it's possible to get those Information by Win-API-Call's. Here they are:
PrinterID: , AusgabeName: , TreiberName: , Port: LPT1:, TrackDefault: , PaperSize:
Papier-Schächte:
Automatisch auswählen, Nr: 15
Automatische Druckeraus, Nr: 262
Schacht 1, Nr: 261
Schacht 2, Nr: 260
Schacht 3, Nr: 259
Schacht 4 (2000-Blatt), Nr: 258
Manueller Einzug (Schac, Nr: 257
Papier-Formate:
Letter, Nr: 1
Legal, Nr: 5
Statement, Nr: 6
Executive, Nr: 7
A3, Nr: 8
A4, Nr: 9
A5, Nr: 11
B4 (JIS), Nr: 12
B5 (JIS), Nr: 13
11x17, Nr: 17
Umschlag 10, Nr: 20
Umschlag DL, Nr: 27
Umschlag C5, Nr: 28
Umschlag B5, Nr: 34
Umschlag Monarch, Nr: 37
Jap. Doppelpostkarte gedreht, Nr: 82
12x18, Nr: 131
9x12, Nr: 132
C4, Nr: 133
Maximum 11,7 x 17,7, Nr: 134
and even set those Information for the RDC-Sturcture, so there is a solution for the setting of the paper size.
But there is not solution for the setting of the color nor the further page settings (Printing onesided or bothsided a.s.o.)
I can change the default windows printer settings but that has no effect on the RDC-Print ! So I think, there must be a solution by the Crystal-Report-Design-printing-DLL (craxdrt.dll) !
Greetings V. Hölscher

Windows Vista won't connect after security change

I have an AirPort Extreme base station, to which we connect using an iMac, PowerBook G4 and a Windows Vista laptop. I used to have it set to WEP, but changed it to WPA for the increased security. After the change, my PowerBook and iMac are connecting just fine, but my wife's Vista machine has been nothing but headaches. It will sometimes connect, after a bit of fighting with it, but not reliably or quickly. At the moment, it says that it is connected with local and internet access, but I can't actually access anything on the internet, and diagnosing the problem in Vista reports that a wireless network cannot be found (despite the fact that it simultaneously reports that it is connected to one).
I know squat about Windows -- I'm a Mac guy. Anybody know how to help me fix this?
Thanks in advance!

No answers, but the problem seems to have disappeared. Man, I'm starting to realize how fortunate I am to have been using Macs for the last 23 years. I think Vista is going to be a very good thing for Apple! There's nothing like actually using Vista to make one want to flee screaming and never look back...

Extensions disappear after workspace change

Similar Messages

Maybe you are looking for