Extenstion all relevent areas to new newly created plant

Hi All
Can any body help me in giving steps to be followed for newly created palnts for the existing configuration. This i need for my client urgently.My email ID [email protected]
thanks in advance
ram

Dear Ram,
In IMG under
Enterprise Structure -> Definition -> Logistics General -> Define Copy Check Delete Plant
Enterprise Structure -> Assignment -> Logistics General -> Assign Business Area to Plant/Valuation Area and Division
Enterprise Structure -> Assignment -> Materials Management -> Assign Purchasing Organisation to Plant
Also, visit:
http://www.sap-img.com/materials/procedures-for-copying-one-plant-to-another.htm
http://www.sapscene.com/sapscene/creating_plants.htm
Regards,
Naveen.

Similar Messages

Message Delivery Restrictions on Distribution Groups setting "Require that all senders are authenticated" on newly created groups

This is new behavior. I recently decommissioned my Exchange 2003 server. Could this have caused this new behavior? If so, how do I ensure "Require that all senders are authenticated" is unchecked during group creation?

I don't believe there is a way to change the default. You'll have to either go to the properties each time after you create the group and disable it. Or run the following powershell script after:
Set-DistributionGroup GROUPNAME -RequireSenderAuthenticationEnabled $False
Thanks, MikeV MCSE 2012

Non-***. KF are coming blank for newly created Plant/Mat in Inventory Query

Hi,
In my BEx query, Total stock quantity values for newly created Plant is not coming.
BW and R3 have gone live on the same date.
(1) Did Stock initialization for existing Plant.
(2) Filled set up table and did INIt load for the existing plants.
(3) compress the request in BW.
BX - with marker update
BF - with no marker update.
Now two more plants are created in R3 side with their opening stock values.
Did Delta to BW.
New Plants are loaded into BW. I can see "Receipt Qty" value in 0IC_C03 cube - 1200.And Issued qty - 000
But When I execute Bex query, "Total Stock qty" and "Stock in Transit" (these all are non-cumulative keyfigures) are coming as blank.
Please suggest. Quick response is much appreciated. This is Production (after Go-live issue).
Thanks in advance.

Any sugestions ??

Trying to add album from iphoto into idvd slideshow. Not all photos are loading. Message "creating thumbnail images...(31 remaining). Been there a long time. What is wrong?

trying to add album from iphoto into idvd slideshow. Not all photos are loading. Message "creating thumbnail images...(31 remaining). Been there a long time. What is wrong?

Open your iPhoto Library, go to that particular album and verify that you can view the full sized version of each image by double clicking on them. Report back with the results.
OT

Last week what are the new indexes created in my database

last week what are the new indexes created in my database.How can I know?
Thanks

Please try this:
SELECT t.name AS TableName ,
ind.name AS IndexName ,
col.name AS ColumnName ,
STATS_DATE(t.object_id, ind.index_id) AS IndexCreationDate
FROM sys.indexes ind
INNER JOIN sys.index_columns ic ON ind.object_id = ic.object_id
AND ind.index_id = ic.index_id
INNER JOIN sys.columns col ON ic.object_id = col.object_id
AND ic.column_id = col.column_id
INNER JOIN sys.tables t ON ind.object_id = t.object_id
WHERE ind.is_primary_key = 0
AND ind.is_unique = 0
AND ind.is_unique_constraint = 0
AND t.is_ms_shipped = 0
AND STATS_DATE(t.object_id, ind.index_id) > ( GETDATE() - 7 ) ;
T-SQL Articles
T-SQL e-book by TechNet Wiki Community
T-SQL blog

Tansfer of Receivable amounts from one plant to another newly created plant

Hi Gurus,
We have created a new plant as per the new requirement from the client in ECC 6.0. Now, client wants some receivable amounts to be transfered from the existing plant to the newly created plant. Can any one guide in this.
Thanks in advance and Regards

Hi SAPshed,
The problem is not the change of plant, which is standard functionality, but the change of sales organization.
An awful lot of information depends on the Sales Organization: Company code (!!), customers, materials, prices, profit center, etc.
SAP does not even admit creating a sales order in a Sales Organization A with reference to a sales order with a sales organization B.
IMHO your best option is to try to maintain the current Sales Orders with the current Sales Organization and change the Sales Order in VA02 (your third option).
If you are absolutely sure that all materials and customers are created for the new Sales Area in the same way and that prices (discounts) are the same, you might want to do a direct update to VBAK table to change the Sales Organization (nasty!), but be prepared for the consequences (no SAP support in case of problems, you are on your own).
Therefore if you insist on a different Sales Organization, then option 2) will be your best best.
Best Regards,
Franck
P.S. IMHO it is Best Practice to have a unique Sales Organization / Company Code.

How to extend work centers of existing plant to newly created plant?

Hello Gurus,
We have SAP setup for one plant and there are various operations are happening under it which is captured under various work center's. Now we have created new plant under same co code. Can we extend WC to newly created plant? Or we need to create whole list of W/C againg newly.
Seeking your help in this regards.

create whole list of W/C againg newly.
You can use existing work centers for copy function.
Regards,
Dhaval

Search term to be added to newly created plant

hi,
i have to add the search term 2 for a newly created plant.
i tried in enterprise structure-> logistics genral-> Define plant but i am not able to loacte any search field there.
   thanks
   Akkshaya

Hello,
Go to SPRO
Enterprise structure
Logistic general
Check/define plant
Select your plant and press address icon from tool bar
there yiou can add search term
Regards
Kedar Kulkarni
***Reward points if useful
Message was edited by:
        KEDAR KULKARNI

Getting *Not all values are bound* error while creating the VO

Hi
When i create a VO with the following query i am getting ORA-01008: not all variables bound error after giving apply.
The Query is:
SELECT
emp.full_name CSA,
COUNT(*) "Total # disputes",
SUM(rac.total_amount) "Total Dispute Amt",
(SELECT
COUNT(jtb4.task_id)
FROM
jtf_tasks_b jtb4,
ra_cm_requests_all rac4
WHERE
rac4.request_id = jtb4.attribute8
AND jtb4.attribute_category = 'Dispute'
AND trunc(jtb4.scheduled_end_date) = trunc(SYSDATE)
AND rac4.org_id = *:1*
AND jtb4.owner_type_code = 'RS_EMPLOYEE'
AND rac4.status = 'PENDING_APPROVAL'
AND jtb4.owner_id=emp.resource_id
AND jtb4.open_flag = 'Y'
AND EXISTS (SELECT 1
FROM ar_payment_schedules_all arp4
WHERE rac4.customer_trx_id = arp4.customer_trx_id
AND arp4.amount_in_dispute IS NOT NULL)) "#D's on Today",
(SELECT
NVL (SUM (rac4.total_amount), 0)
FROM
jtf_tasks_b jtb4,
ra_cm_requests_all rac4
WHERE
rac4.request_id = jtb4.attribute8
AND jtb4.attribute_category = 'Dispute'
AND trunc(jtb4.scheduled_end_date) = trunc(SYSDATE)
AND rac4.org_id = *:2*
AND jtb4.owner_type_code = 'RS_EMPLOYEE'
AND rac4.status = 'PENDING_APPROVAL'
AND jtb4.owner_id=emp.resource_id
AND jtb4.open_flag = 'Y'
AND EXISTS (SELECT 1
FROM ar_payment_schedules_all arp4
WHERE rac4.customer_trx_id = arp4.customer_trx_id
AND arp4.amount_in_dispute IS NOT NULL)) "$Val Disp on Today",
(SELECT
COUNT (jtb4.task_id)
FROM
jtf_tasks_b jtb4,
ra_cm_requests_all rac4
WHERE
rac4.request_id = jtb4.attribute8
AND jtb4.attribute_category = 'Dispute'
AND trunc(jtb4.scheduled_end_date) < trunc(SYSDATE)
AND rac4.org_id = *:3*
AND jtb4.owner_type_code = 'RS_EMPLOYEE'
AND rac4.status = 'PENDING_APPROVAL'
AND jtb4.owner_id=emp.resource_id
AND jtb4.open_flag = 'Y'
AND EXISTS (SELECT 1
FROM ar_payment_schedules_all arp4
WHERE rac4.customer_trx_id = arp4.customer_trx_id
AND arp4.amount_in_dispute IS NOT NULL)) "#D's <Today",
(SELECT
NVL (SUM (rac4.total_amount), 0)
FROM
jtf_tasks_b jtb4,
ra_cm_requests_all rac4
WHERE
rac4.request_id = jtb4.attribute8
AND jtb4.attribute_category = 'Dispute'
AND trunc(jtb4.scheduled_end_date) < trunc(SYSDATE)
AND rac4.org_id = *:4*
AND jtb4.owner_type_code = 'RS_EMPLOYEE'
AND rac4.status = 'PENDING_APPROVAL'
AND jtb4.owner_id=emp.resource_id
AND jtb4.open_flag = 'Y'
AND EXISTS (SELECT 1
FROM ar_payment_schedules_all arp4
WHERE rac4.customer_trx_id = arp4.customer_trx_id
AND arp4.amount_in_dispute IS NOT NULL)) "$Val Disp<Today",
(SELECT
COUNT (jtb4.task_id)
FROM
jtf_tasks_b jtb4,
ra_cm_requests_all rac4
WHERE
rac4.request_id = jtb4.attribute8
AND jtb4.attribute_category = 'Dispute'
AND trunc(jtb4.scheduled_end_date) > trunc(SYSDATE)
AND rac4.org_id = *:5*
AND jtb4.owner_type_code = 'RS_EMPLOYEE'
AND rac4.status = 'PENDING_APPROVAL'
AND jtb4.owner_id=emp.resource_id
AND jtb4.open_flag = 'Y'
AND EXISTS (SELECT 1
FROM ar_payment_schedules_all arp4
WHERE rac4.customer_trx_id = arp4.customer_trx_id
AND arp4.amount_in_dispute IS NOT NULL)) "#D's >Today",
(select
nvl(SUM (rac4.total_amount), 0)
FROM
jtf_tasks_b jtb4,
ra_cm_requests_all rac4
WHERE
rac4.request_id = jtb4.attribute8
AND jtb4.attribute_category = 'Dispute'
AND trunc(jtb4.scheduled_end_date) > trunc(SYSDATE)
AND rac4.org_id = *:6*
AND jtb4.owner_type_code = 'RS_EMPLOYEE'
AND rac4.status = 'PENDING_APPROVAL'
AND jtb4.open_flag = 'Y'
AND jtb4.owner_id=emp.resource_id
AND EXISTS (SELECT 1
FROM ar_payment_schedules_all arp4
WHERE rac4.customer_trx_id = arp4.customer_trx_id
AND arp4.amount_in_dispute IS NOT NULL)) "$Val Disp>Today",
MIN(jtb.scheduled_end_date) "EARLIEST_END_DATE",
MAX(jtb.scheduled_end_date) "LATEST_END_DATE"
FROM
jtf_tasks_b jtb,
ra_cm_requests_all rac,
jtf_rs_emp_dtls_vl emp
WHERE
rac.request_id=jtb.attribute8
AND jtb.owner_id=emp.resource_id
AND jtb.attribute_category='Dispute'
AND rac.org_id =*:7*
AND jtb.scheduled_end_date IS NOT NULL
AND rac.status = 'PENDING_APPROVAL'
AND jtb.owner_type_code = 'RS_EMPLOYEE'
AND jtb.open_flag = 'Y'
AND EXISTS (SELECT 1
FROM apps.dnb_ac_orc_coll_csa_map_s orc
WHERE orc.csa_id = jtb.owner_id
AND NVL(orc.attribute1,107) = *:8*
AND orc.customer_segment = *:9*
AND EXISTS (SELECT 1
FROM ar_payment_schedules_all arp
WHERE rac.customer_trx_id = arp.customer_trx_id
AND arp.amount_in_dispute IS NOT NULL
GROUP BY emp.full_name
,emp.resource_id
I dont have any cue why the error is prompting while creating the VO itself. Kindly let me know the issue with the above query.
Thanks,
Praveen

Praveen,
In the Query , you are given alias name like "#D's on Today" . Avoid to use special charaters in coulmn alias in the view query, as the alias name is failed to conver it into view attributes.
During creating view object, in the query screen, there is dropdown which is below the query region. By default it is style of "oracle named" , changed it to "Oracle Positional".
Thanks,
Kumar

All fields are not visible while creating transformation

Hi experts,
I am trying to create transformaion between a LO datasource and DSO designed by me. In R3, in RSA6 I can see more than 45 fields but while creating transformation only 30 fields are available.
I tried by replicating the datasource multiple times but no change.
kindly suggest where I am doing wrong.
thanks and regards,
rajesh.

Hi Rajesh, Please follow the follwing steps:
Goto RSA6, select your data source and then click on change and save button.
this will take you to transfer structure. There check the fiels you want to see have hide check box or not. If yes then un hide them. Then save the transfer structure.
Execute the datasource in RSA3. You should be able to see the filds you have unhide in previous step.
replicate the data source in in BW
Goto transfomation in change mode and then to routine. Now you will be able to see the fileld in the routine.

My officejet 4620 printer will not print in black ink all cartridges are full (new)

I'm lost

I saw your post and have forwarded it to the right people to have it reviewed. You should hear back from someone shortly via private message on this forum.
Keep an eye on the PM (Private Message) envelope at the top right corner of each page. When you see a number next to the grey envelope, click it. That's the way you'll be contacted.
If you need to know how to post a private message
click here
Thanks.
- I worked for HP.

New files created with no group-write permission

We have OS X set up in Standard configuration.
We have one workgroup. When someone creates a new file in this workgroup, it is saved with permissions of "Username: Read/write", "Workgroup: read only", "Everyone: read only".
How do I change this to something sane? (i.e. Username: Read/write, Workgroup: Read/write, Everyone: No access)
Thanks in advance.

+When someone creates a new file ... (it gets POSIX) permissions of "Username: Read/write", "(group): read only", "Everyone: read only".+
This is perfectly normal.
*Two Permission Models* First, you probably already know that Mac OS X uses two models for permissions when determining effective access for files and folders. The two models are Standard POSIX (UNIX) permissions and Access Control Lists (ACLs).
*POSIX Permissions* POSIX permissions are very simple, and have some limitations. They consist of three "fields": an owner field, a group field, and an everyone else field. (There's also a special permissions field, but we'll skip that for this discussion.) The POSIX owner is always a user; it cannot be a group. The POSIX group represents one group, and the everyone else field covers any user who is neither the owner nor a member of the chosen POSIX group.
POSIX uses three bits to describe the access returned for each field. There is a bit for read, one for write, and one for execute (for folders, this means traverse, or see contents). Thus, there are eight possible POSIX permission combinations:
*POSIX Access Type ................... Binary Bit Representation ........... Decimal Bit Representation*
No Access .......................................................... 000 ......................... 0
Execute Only ...................................................... 001 ......................... 1
Write Only .......................................................... 010 ......................... 2
Read Only .......................................................... 100 ......................... 4
Write & Execute (Drop Box folder)....................... 011 ......................... 3
Read & Execute (Read-only folder) ..................... 101 ......................... 5
Read & Write ...................................................... 110 ......................... 6
Read, Write, and Execute (Read/write folder)...... 111 ......................... 7
It's helpful to know these decimal representations, because they provide a quick shorthand for describing POSIX access. Typically, we use the decimal shorthand like this: (decimal bit representation of the POSIX special permissions field)(... of the POSIX owner field)(... for the group field)(... for the everyone field). Thus, a combination like owner read, write, and execute, group read & execute, and everyone else read & execute is 0755: Special permissions are 0 (000 binary), owner is 7 (111 binary - read, write, execute), group is 5 (101 - read and execute), and everyone is the same as group (101).
*How POSIX Access is Determined for a Connecting User* In determining POSIX access to a file or folder, a user can only be "given" the access of POSIX owner, POSIX group, or POSIX everyone. The system first checks to see if the connecting user is the POSIX owner; if so, the user gets the permission bits assigned to the owner field. Otherwise, the user's primary group is compared to the POSIX group assigned to the file or folder; if they match, the user is given POSIX group access. If that fails, then the POSIX group is queried for a list of member users to see if the connecting user is a member of that group; if so, the user is given POSIX group access. If all three fail, then the user is given access assigned to everyone else.
*How POSIX Permissions are Set for Newly-Created Files and Folders* When new files or folders are created within a parent, the following determines their POSIX permissions:
1. The POSIX owner is the user who creates the file or folder.
2. The POSIX group is set to the group of the folder's parent.
3. POSIX permission bits (owner, group, everyone else) are set by the umask. The umask is 0022 by default, so default POSIX bits are 0755 (0644 for files) - owner read, write, group read, everyone read.
If the POSIX permissions were the extent of the permissions model, then we would have to either modify the umask (on each client) or adjust the server's behavior via an Inherit Permissions scheme. The first option is insecure, because you cannot just modify the umask for a particular server's share point - it would apply system-wide on the client computer, even for local files. The Inherit Permissions via POSIX was the method used by Mac OS X Server 10.3 and earlier.
Fortunately, you don't have to do either. That's where ACLs come in to play:
*ACL Permission Model* Access Control lists are just what you'd expect: a list of entries that describe what a user or group can or cannot do. Unlike POSIX, you can have a virtually unlimited number of ACL entries (or ACEs). Each ACE can apply to just a single user or a whole group of users. ACLs support two modes of operation, Allow or Deny, along with 24 unique controls arranged in four categories:
*Category ... Controls for Files Only ....... Folders Only .......................................................... Files & Folders*
Read ............... read and execute .............. list and search ........................................... readsecurity, readattr, readextattr
Write ............... write and append .............. delete_child, add_file, add_subdirectory .... delete, writeattr, writeextattr
Administer ............................................................................... ...................................... chown & writesecurity
Inherit ............ file_inherit ......................... directory_inherit, limit_inherit .................... only_inherit
*How ACL Access is Determined for a Connecting User* Since each ACL entry can be either Allow or Deny, the system makes two "tallies" for the connecting user: one for applicable Allow ACEs and one for applicable Deny ACEs. An ACE applies to a connecting user only if the ACE is specifically for that user or if the user is a member of the group to which the ACE applies. The tallies are created by adding all applicable ACEs for each Allow/Deny category. Thus, the ACLs return two things: a list of deny controls and a list of allow controls.
*How ACLs are Inherited to Newly-Created Files and Folders* When new files or folders are created within a parent, the following determines their ACL permissions:
1. If the file_inherit control is part of any listed ACE, that ACE is applied to newly-created files therein.
2. If the directory_inherit control is part of any listed ACE, that ACE is applied to newly-created folders.
*How ACLs and POSIX Permissions Work Together* The access level returned from POSIX and the two ACL tallies are combined in the following way to determine the effective permissions:
*Effective Permissions = (POSIX Access) + (ACL Allow tallies) - (ACL Deny tallies)*
For each unique connecting user, the effective permissions will be calculated in the previous way.
*Solving Your Problem* You can easily use effective permissions to your advantage to solve your problem. Simply enable ACLs on the volume that houses your troublesome share point, and add a new ACL entry for the desired workgroup, granting it all read, write, and inherit controls. This way, when users create new items in the share point, they automatically inherit that ACE. You'll also have to propagate permissions for all items that are already inside of the share point after you've added the ACE.
Here's an easy way to do both with an ACE granting writers_group read/write/inheritance on some share point using chmod form the command-line:
sudo chmod -R +a "writers_group allow readattr,readextattr,readsecurity,list,search,read,execute,\
writeattr,writeextattr,delete,deletechild,add_file,addsubdirectory,write,append,\
fileinherit,directoryinherit" /path/to/share_point
Hope this helps!
--Gerrit
Message was edited by: Gerrit DeWitt

System impact if new division created in CRM

Hi,
We have SAP CRM 7.0 and ECC 6.0,currently we have divisions 19,20,22 and 23 .These are maintained in ECC and replicated to CRM.Now there is requirement of new division and i am working on CRM system impact analysis for sales process.Please let me know the impact on CRM system if new division is created and also let me know in what all the areas this new division has to be updated (like org structure ...ect)
Please also let me know is there any relationship between division and product hierarchy.

Hi
1. It is always advisable to use one PRIMARY system for Master Data maintenance.
2. If you have created earlier division in ECC and downloaded to CRM, it is best practise to create a new division in ECC and download the same to CRM
3. This division, once downloaded to CRM, can be used in the ORGANIZATION structure.
OR
1. You can create a division in CRM and maintain the same in ORGANIZATION structure. (The way divisions 19,20,22 and 23 are maintained in CRM)
>>There is no relationship between the division and product hierarchy. (comm_hierarchy)
Hope this will be helpful
Regards

What are the New Features in Apex 3.1.2 as Comparitive with Apex 3.1

hi all
what are the new features in Apex 3.1.2 as compartively with Apex 3.1?
Is it recommended to use 3.12 comparitivly 3.1?
please drop ur valuable answers
many thanks
khaja
Edited by: ATM on Dec 27, 2008 1:06 PM
Edited by: ATM on Dec 27, 2008 1:11 PM
Edited by: khaja on Jan 18, 2009 10:47 AM

Hello,
Versions 3.1.1 and 3.1.2 are actually patched version of APEX 3.1. As such, they don’t introduce new features, but mainly fix bugs from the main release. If you want to learn specific details about these versions, you should read the readme file attached to the patch set files (on metalink).
It’s always best to work with the latest patched version, as it reduces your chances to encounter bugs. In general, so far the new APEX versions added many new features and technologies, while maintaining backward compatibility, so existing applications functionality is not impaired. Personally, I don’t see any reason not to upgrade and use the latest version, certainly when you are comparing 3.1 to 3.1.2.
Regards,
Arie.

Hello, starting with today I have a strange problem: all events are correctly shown in the finder but in FCP-X there`s`none and every time I open it creates a new event. What is wrong?

Hello, starting with today I have a strange problem with Final Cut Pro X: all events are correctly shown in the finder but in FCP-X there`s`none and every time I open it creates a new event. What is wrong?

Here`s the screenshot.
But anyway:
The drive is Makintosh HD from my Macbook and it is shown in the event mediathek and in the projects. Since I`ve recognized this problem I installed FCPX again and consequently the event and project directory created by FCPX is where it should be and it shows all the test events including it`s files.
So what happens? Opening FCPX you see only one event and that a new empty event. All previous events are not shown there even if you can see them in the finder. So if you import again the clips they are in this new event library. After closing correctly FCPX and reopening there again is nothing than an new and empty event. What it does is that it recognized that i.e. there are events with previous numbers and so it creates an new one with the next available counting number.
If you want to open one event from the finder it by clicking to the file it opens FCPX but it says it cannot open the clicked file.

Extenstion all relevent areas to new newly created plant

Similar Messages

Maybe you are looking for