Extenstion manager CC not see photoshop

Extenstion manager CC not see photoshop and i cant setup plugin cut and slice cutandslice.me (xml error)
I have trial CC photoshop. What i do wrong?

windows 8.1, i tried reinstall all adobe programs again, and before it deleted with revo uninstall all of it, but bug is here still...
Result: BridgeTalk Diagnostics
  Info:
  Name = estoolkit-4.0
  Status = PUMPING
  Path
  Version = 2.0
  Build = ES 4.5.5
  Next serial number = 18
  Logging: = OFF
  Now = 14:08:55
  Messages:
  Message Version = 2.05
  Authentication = ON
  Digest = ON
  Thread: estoolkit-4.0#thread
  Avg. pump interval = 32ms
  Last pump = 89ms ago
  Ping: 7
  ECHO_REQUEST: ECHO_RESPONSE
  Timeout = undefined
  Handler = undefined
  STATUS: PUMPING
  Timeout = undefined
  Handler = undefined
  MAIN: MAIN
  Timeout = undefined
  Handler = installed
  LAUNCHED: LAUNCHED
  Timeout = undefined
  Handler = installed
  DIAGNOSTICS: DIAGNOSTICS
  Timeout = undefined
  Handler = installed
  INFO: INFO
  Timeout = undefined
  Handler = installed
  SETUPTIME: thread=0ms, left=0ms
  Timeout = undefined
  Handler = undefined
  Instances: 3
  estoolkit-4.0#dbg:
  msg[14:08:54]: 00000013
  @BT>Version = 2.05
  Target = estoolkit-4.0#dbg
  Sender = estoolkit-4.0#dbg
  Sender-ID = localhost:win7520
  Timeout = 14:08:55
  Type = Ignore
  Response-Request = Timeout
  Headers = (no headers)
  Timestamp = 14:08:54
  Serial-Number = 13
  Received = undefined
  Result = undefined
  Error = undefined
  Body = (empty)
  Incoming: 1
  Outgoing: 0
  Handler: 9
  ExtendScript = for all messages
  Error = for only msg #3
  Error = for only msg #5
  Error = for only msg #9
  Result = for only msg #13
  Error = for only msg #13
  Timeout = for only msg #13
  Result = for only msg #15
  Error = for only msg #15
  estoolkit-4.0#estk:
  msg[14:08:54]: 00000015
  @BT>Version = 2.05
  Target = estoolkit-4.0#estk
  Sender = estoolkit-4.0#dbg
  Sender-ID = localhost:win7520
  Timeout = 14:18:54
  Type = Debug
  Response-Request = Result Error
  Headers = (no headers)
  Timestamp = 14:08:54
  Serial-Number = 15
  Received = undefined
  Result = undefined
  Error = undefined
  Body: 107 bytes
  Text = <get-properties engine="main" object="$.global" exclude="undefined,builtin,prototype" all="true" max="20"/>
  Incoming: 1
  Outgoing: 0
  Handler: 1
  ExtendScript = for all messages
  estoolkit-4.0: (main)
  Incoming: 0
  Outgoing: 0
  Handler: 1
  ExtendScript = for all messages

Similar Messages

  • Extension manager does not see all of my adobe programs?? What can i do without reinstalling????

    Hello i needed to install an extension for dreamweaver and for some reason extension manager does not see all my adobe programs. How can i fix that without reinstalling the programs?
    Here are my Bridgetalk Diagnostics if it helps:
    Result: BridgeTalk Diagnostics
      Info:
      Name = estoolkit-3.8
      Status = PUMPING
      Group = cs
      Path = /Applications/Utilities/Adobe Utilities-CS6.localized/ExtendScript Toolkit CS6/ExtendScript Toolkit.app
      Version = 2.0
      Build = ES 4.2.12
      Next serial number = 40
      Logging: = OFF
      Now = 12:58:04
      Messages:
      Message Version = 2.05
      Authentication = ON
      Digest = ON
      Thread: estoolkit-3.8#thread
      Avg. pump interval = 76ms
      Last pump = 69ms ago
      Ping: 7
      ECHO_REQUEST: ECHO_RESPONSE
      Timeout = undefined
      Handler = undefined
      STATUS: PUMPING
      Timeout = undefined
      Handler = undefined
      MAIN: MAIN
      Timeout = undefined
      Handler = installed
      LAUNCHED: LAUNCHED
      Timeout = undefined
      Handler = installed
      DIAGNOSTICS: DIAGNOSTICS
      Timeout = undefined
      Handler = installed
      INFO: INFO
      Timeout = undefined
      Handler = installed
      SETUPTIME: thread=1ms, left=29ms
      Timeout = undefined
      Handler = undefined
      Instances: 3
      estoolkit-3.8#dbg:
      msg[12:58:04]: 00000035
      @BT>Version = 2.05
      Target = estoolkit-3.8#dbg
      Sender = estoolkit-3.8#dbg
      Sender-ID = localhost:mac3334
      Timeout = 12:58:05
      Type = Ignore
      Response-Request = Timeout
      Headers = (no headers)
      Timestamp = 12:58:04
      Serial-Number = 35
      Received = undefined
      Result = undefined
      Error = undefined
      Body = (empty)
      Incoming: 1
      Outgoing: 0
      Handler: 9
      ExtendScript = for all messages
      Error = for only msg #25
      Error = for only msg #27
      Error = for only msg #31
      Result = for only msg #35
      Error = for only msg #35
      Timeout = for only msg #35
      Result = for only msg #37
      Error = for only msg #37
      estoolkit-3.8#estk:
      msg[12:58:04]: 00000037
      @BT>Version = 2.05
      Target = estoolkit-3.8#estk
      Sender = estoolkit-3.8#dbg
      Sender-ID = localhost:mac3334
      Timeout = 13:08:04
      Type = Debug
      Response-Request = Result Error
      Headers = (no headers)
      Timestamp = 12:58:04
      Serial-Number = 37
      Received = undefined
      Result = undefined
      Error = undefined
      Body: 107 bytes
      Text = <get-properties engine="main" object="$.global" exclude="undefined,builtin,prototype" all="true" max="20"/>
      Incoming: 1
      Outgoing: 0
      Handler: 1
      ExtendScript = for all messages
      estoolkit-3.8: (main)
      Incoming: 0
      Outgoing: 0
      Handler: 1
      ExtendScript = for all messages
      Targets: 7
      Connector = PCD
      Installed: 0
      Running: 0
      fireworks-12.0:
      Group = cs
      Path = /Applications/Adobe Fireworks CS6/Adobe Fireworks CS6.app
      Display Name = Adobe Fireworks CS6
      MsgAuthentication = ON
      MsgDigest = ON
      ESTK = OFF
      BundleID = com.adobe.Fireworks
      Status = (not running)
      ExeName = Adobe Fireworks CS6.app
      aftereffects-11.0:
      Group = cs
      Path = /Applications/Adobe After Effects CS6/Adobe After Effects CS6.app
      Display Name = Adobe After Effects CS6
      MsgAuthentication = ON
      MsgDigest = ON
      ESTK = ON
      BundleID = com.adobe.AfterEffects
      Status = (not running)
      ExeName = Adobe After Effects CS6.app
      audition-5.0:
      Group = cs
      Path = /Applications/Adobe Audition CS6/Adobe Audition CS6.app
      Display Name = Adobe Audition CS6
      MsgAuthentication = ON
      MsgDigest = ON
      ESTK = ON
      BundleID = com.adobe.Audition.5.0
      Status = (not running)
      ExeName = Adobe Audition CS6.app
      bridge-5.064:
      Group = cs
      Path = /Applications/Adobe Bridge CS6/Adobe Bridge CS6.app
      Display Name = Bridge CS6
      MsgAuthentication = ON
      MsgDigest = ON
      ESTK = ON
      BundleID = com.adobe.bridge5
      Status = (not running)
      ExeName = Adobe Bridge CS6.app
      estoolkit-3.8: PUMPING
      Group = cs
      Path = /Applications/Utilities/Adobe Utilities-CS6.localized/ExtendScript Toolkit CS6/ExtendScript Toolkit.app
      Display Name = ExtendScript Toolkit CS6
      MsgAuthentication = ON
      MsgDigest = ON
      ESTK = ON
      Status = PUMPING
      Info:
      Group = cs
      Version = 2.0
      Build = ES 4.2.12
      Next serial number = 47
      Logging: = OFF
      Now = 12:58:04
      Messages:
      Message Version = 2.05
      Authentication = ON
      Digest = ON
      Thread: estoolkit-3.8#thread
      Avg. pump interval = 76ms
      Last pump = 270ms ago
      Ping: 7
      ECHO_REQUEST: ECHO_RESPONSE
      Timeout = undefined
      Handler = undefined
      STATUS: PUMPING
      Timeout = undefined
      Handler = undefined
      MAIN: MAIN
      Timeout = undefined
      Handler = installed
      LAUNCHED: LAUNCHED
      Timeout = undefined
      Handler = installed
      DIAGNOSTICS: DIAGNOSTICS
      Timeout = undefined
      Handler = installed
      INFO: INFO
      Timeout = undefined
      Handler = installed
      SETUPTIME: thread=1ms, left=29ms
      Timeout = undefined
      Handler = undefined
      ExeName = ExtendScript Toolkit.app
      exman-6.0:
      Group = cs
      Path = /Applications/Adobe Extension Manager CS6/Adobe Extension Manager CS6.app
      Display Name = Adobe Extension Manager CS6
      MsgAuthentication = ON
      MsgDigest = ON
      ESTK = OFF
      BundleID = com.adobe.exman
      Status = (not running)
      ExeName = Adobe Extension Manager CS6.app
      switchboard-2.0:
      Group = cs
      Path = /Library/Application Support/Adobe/SwitchBoard/SwitchBoard.app
      Display Name = SwitchBoard 2.0
      MsgAuthentication = ON
      MsgDigest = ON
      ESTK = OFF
      Status = (not running)
      ExeName = SwitchBoard.app
      Installed: 6
      Running: 1
      Groups: 119
      cs3:
      acrobat-8.0
      aftereffects-8.0
      soundbooth-1.0
      bridge-2.0
      contribute-4.5
      devicecentral-1.0
      dreamweaver-9.0
      encore-3.0
      estoolkit-2.0
      fireworks-9.0
      flash-9.0
      illustrator-13.0
      indesign-5.0
      indesignserver-5.0
      incopy-5.0
      photoshop-10.0
      premiere-3.0
      stockphotos-1.5
      audition-3.0
      cs4:
      acrobat-9.0
      aftereffects-9.0
      soundbooth-2.0
      bridge-3.0
      contribute-5.0
      devicecentral-2.0
      dreamweaver-10.0
      encore-4.0
      estoolkit-3.0
      fireworks-10.0
      flash-10.0
      illustrator-14.0
      indesign-6.0
      indesignserver-6.0
      incopy-6.0
      photoshop-11.*
      premierepro-4.0
      audition-4.0
      ame-1.0
      exman-2.0
      cs5:
      acrobat-9.0
      aftereffects-10.0
      soundbooth-3.0
      bridge-4.0
      contribute-6.0
      devicecentral-3.0
      dreamweaver-11.0
      encore-5.0
      estoolkit-3.5
      fireworks-11.0
      flash-11.0
      illustrator-15.0
      indesign-7.0
      indesignserver-7.0
      incopy-7.0
      photoshop-12.*
      premierepro-5.0
      audition-5.0
      ame-2.0
      exman-3.0
      flashbuilder-4.0
      flashcatalyst-1.0
      ts1:
      captivate3-en_us
      captivate3-fr_fr
      captivate3-it_it
      captivate3-ja_jp
      captivate3-es_es
      captivate3-de_de
      ts2:
      captivate-4.0
      el2:
      captivate-5.0
      as1:
      acrobat-10.0
      ts3:
      robohelp-9.0
      framemaker-10.0
      cs55:
      aftereffects-10.5
      audition-4.0
      bridge-4.1
      contribute-6.1
      devicecentral-3.5
      dreamweaver-11.5
      encore-5.1
      estoolkit-3.6
      fireworks-11.1
      flash-11.5
      illustrator-15.1
      indesign-7.5
      indesignserver-7.5
      incopy-7.5
      photoshop-55.*
      premierepro-5.5
      ame-2.5
      exman-5.5
      flashbuilder-4.5
      flashcatalyst-1.5
      switchboard-2.0
      el25:
      captivate-5.5
      cs60:
      aftereffects-11.0
      audition-5.0
      bridge-5.*
      contribute-6.88
      devicecentral-4.0
      dreamweaver-12.0
      encore-6.0
      estoolkit-3.8
      fireworks-12.0
      flash-12.0
      illustrator-16.*
      indesign-8.0
      indesignserver-8.0
      incopy-8.0
      photoshop-60.*
      premierepro-6.0
      ame-6.0
      exman-6.0
      flashbuilder-4.52
      switchboard-2.0
      prelude-1.0
      speedgrade-6.0
      el60:
      captivate-60.*
      ts4:
      robohelp-10.0
      framemaker-11.0

    Same issue.  Doesn't see Dreamweaver.

  • Manager could not see employee's data on MSS

    Hello Experts,
    One the Manager could not see employee's data on MSS (in iview). Only employee names appearing but not the other details.
    We have checked and debugged, the data is populating in the backend but on portal its only displaying employee names.
    We have checked the configuration, roles and it is also looking fine. Not sure why it is not displaying data on portal.
    Please help. Thank you.
    Regards
    Saurabh

    First off I want to thank you Siddharth for all your responses.  Ultimately, your responses helped me get on the right path for  resolving this issue. 
    I ended up taking this into debug and finding out specifically why these absences did not appear on the team calendar.  I'd like to begin by indicating, in my opinion, this is a bug/programming flaw.
    Within IF_EX_PT_ABS_REQ~AUTH_CHECK_AND_ANONYMIZE_DATA there was a check to determine if the rule group had the IT2001/2002 Authorization Check section, Employees: Deactivate Authorization Check and Managers: Deactivate Authorization Check boxes checked.  For 1 out of the 3 rule groups configured, one group did not have those boxes checked, while the other two did. 
    What happened, is when the program built it's list of PERNA's that report directly to this manager, the first person in the list happened to be in the rule group that did not have the Deactivate Authorization boxes checked.  However, the remaining PERNA's in the list were in another rule group that did have the Deactivate Authorization boxes checked.  Based on my interpretation, the team calendar should have ommitted the absences of the one person, but should have displayed the absences for everyone else in the separate rule group. The code only reads what rule group the first PERNA in the list is and applies that MSS_NO_AUTHCHECK value to all the other PERNA's in the list.
    Either the code should do a MSS_NO_AUTHCHECK lookup on every PERNA on the list or should check what rule group the approver/manager is in and apply it to all his employees.
    Game - Set - Match.......

  • Cisco Unified Operation Manager: can not see the Campus manager

    Dear all,
    I have installed the CUOM to manage my IPT system. I have successfully installed without any errors. The system now can detect all IPT system components but I have a problem. From the Tool on Service Level View, I only the option for Alert History and can not see the option for Campus manager to customize the topology (like the tool on Ciscoworks LMS).
    Please give me some advices.
    Thank you,
    Thanh

    On the administration page, you will be able to see "View Reports For" header on the top.
    Under that header you will see the following fields:
    User ID/Type/Last/Status/Folder /Instance
    Above values will be used by PeopleSoft to filter and display the list of reports
    If the user has selected Status as Processing and saved the page, PeopleSoft will only show reports which are in Processing status.
    If user runs a report and it has been posted, it will not show up in report manager coz the filter value is set to Processing.
    Hope this helps. I dont think Permissions has anything to do with this since user is able to view the page.

  • OEL6.1 in VM manager does not see network card

    I installed OL6.1 as a guest machine in VM manager. I started the install process and when I got to the network configuration it would not let me click on "configure network", it was greyed out. I thought that was a little bit odd but I just thought that I would configure it later. Once I got to the desktop of OL6.1 i checked for the eth0 settings but there was no eth0 at all. The OL6.1 did not even know a network card existed, but I tried to add it manually and still it did not see anything and would not connect to the internet. Has anyone seen this problem before? Thanks.

    I will try to answer to the best of my knowledge your questions but I am a bit new at this. I downloaded the OEL 6.1iso media from Oracle site, I then imported it into the resources section in VM manager 2.1.
    I then used the create new Virtual Machine and selected the server pool.
    I selected the ISO file with OEL 6.1.
    I gave it a name, memory size, console password.
    Below that I can see the Virtual Network Interface is selected and it shows Bridge xenbr0.
    It is showing Fully Virtualized machine not paravirtualized mode. As far as I know I did not install in Xen HVM or with PV drivers.
    That is about all I did. Then I started the machine and when through the install process but it did not see the virtual network device.

  • Lightroom 3 does not see Photoshop CS5 as Primary EXTERNAL editor

    After removing prior versions of Lightroom (2.7) and Photoshop (CS4), Lightroom 3 does not recognize Photoshop CS5 64 bit or 32 bit as the PRIMARY external editor.  I can select the file and edit in the proper file, but the other options are greyed out.

    Missing Registry entry caused by uninstalling CS4 AFTER installing CS5.

  • Extensions (Add-ons) shown in Extension manager are not in Photoshop cc 2014

    I started with Photoshop cc and downloaded several Add-ons which I used, particularly Adobe Watermark. When Photoshop cc 2014 was released we realised that the majority of these Add-ons would not work in this new edition of Photoshop. Consequently I have to also run Photoshop cc as well to allow me to use these Add-ons.
    If I open Adobe Extension Manager, and select under Products I see a list of all the Add-ons that work in Photoshop cc, which is correct. However if I select Photoshop cc 2014 I see a long list ( 16 Add-ons) which have enabled ticked by the side of the name. Only 5 of these actualy show  in Photoshop cc 2014, so something is wrong here.
    I assume that Adobe Watermark is an Adobe product, so when are Adobe going to sort this out, and the problem in Adobe Extension Manager?

    Flash based extensions are not supported by PS CC 2014 anymore. Please refer to http://blogs.adobe.com/photoshopdotcom/2014/04/photoshop-spring-cleaning.html, http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html
    And http://blogs.adobe.com/crawlspace/2014/06/2014-release-of-photoshop-cc-faq.html#plugins (scroll down to "Why don’t my 3rd Panels show up in the 2014 release of Photoshop CC? What happened to Oil Paint, Mini-Bridge & Kuler?”)
    If some extensions are not supported by PS CC 2014, you have to continue to use them in PS CC until their HTML based counterparts become available.

  • Extenstion Manager CC not recognizing other CC apps

    I bought a paid extension and can't get it to install because Extension Manager doesnt 'see' any of my installed CC apps. In the Products sidebar, i just see 'Others'. I have the full CC suite installed. How do i address this? I just uninstalled/reinstalled Ext Manager and nothing changed. Version is 7.0.0.347

    Please update Extension Manager CC to the latest version 7.2.1.
    If this issue still exists after update, please refer to https://forums.adobe.com/message/6451979#6451979 . Note that reinstalling Extension Manager doesn't help. If the link above doesn't help you, please look at Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6<http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html> to solve this problem.

  • Lightroom does not see photoshop

    Lightroom 5.7.1 Edit In menu selection results in Photoshop CC 2014 opening but will not copy photo overs to edit.
    How do you get CC products to recognize each other?

    It's a known bug/ issue.
    Mylenium

  • Cannot see Photoshop Services in Bridge

    I do not see Photoshop Services item under my Bridge Tools menu. I am running Bridge / PS CS4. I did the recommended install and all startup scripts are enabled. I also do not see the Photoshop automate tasks like Contact sheet II that I used to have under CS3 (I have installed the extra plugins from the CS4 disk). I have a MacBook Pro and G4 MDD desktop and have the same problem on both.
    What am I doing wrong? (I tried searching forums and support, and am sorry if I missed this).
    Thanks!
    Mike...

    Can't tell you about Photoshop Services, don't know that but for the contact sheet they replaced it with the Adobe Output Module.
    this one you can reach trough using the workspace Output in the presets under workspaces or using the icon of a sheet of paper with an arrow (this is the right icon in the row top left on the bridge window.
    If you can't achieve what you want with the output module you can always look at the goodies CD from the original install package for CS4, inhere you will find the Contact sheet 2 scripts for both PS and Bridge and a manual for installation :-)

  • So I installed photoshop cc on the creative cloud thing. Now how do I open it? It has the list of apps on the browser thing and I don't see photoshop cc anywhere..

    Help. Photoshop newbie.

    OK, with windows 8.1 the apps are not automatically on the start page. At the bottom of the page you should see a downward arrow. Click on that to bring up all the apps installed on your computer. You can right click on photoshop to pin it to the start page or the desktop taskbar. In any of these places you can click on it or double click on it to run photoshop.
    If you do not see photoshop listed under the adobe apps in the all apps page, then odds are it is not installed or was installed incorrectly.
    If you need more help let us know.

  • Decktop 6.2, HotSync not see Bluetooth as Connection​s option, Vista 64-bit

    I got a new Dell Studio XPS with Vista Home Premium 64-bit and discovered that I could not perform a USB sync with my Treo 755p (Verizon). Since bluetooth sync was recommended, I purchased an IOGear Bluetooth 2.0 USB Micro Adapter (GBU421) and allowed Windows to discover the device. When prompted by Windows to insert the disk to install the driver, I went to the IOGear website and downloaded the most recent software (WIDCOMM bluetooth software version 5.5.0.4400 released 03/11/09 for Windows XP & Vista, 32 & 64-bit). Prior to installing this software, I had done a "clean" uninstall of all Palm files as directed in these forums and did a restart of the computer. I installed the bluetooth software & configured it to be "discoverable" and did another restart. Finally, I downloaded Palm Desktop 6.2, installed it and restarted the computer again. However, HotSync Manager does not see Bluetooth as one of the Connection options. My Treo 755p does "see" the computer when configuring bluetooth. Is there any hope that I may be able to sync this computer with my 755p or am I forced to look for a different smartphone? Any suggestions would be greatly appreciated. Thanks.
    Post relates to: Treo 755p (Verizon)
    This question was solved.
    View Solution.

    bonz1973: It worked! I am so relieved & happy after so many hours of frustration. I want to thank you so much for your reference to messages #353 & #354 on "Vista 64 Hotsync solution found!" I want to share some of my experience that may help someone else. My comments are in [ ] and take off of those from edwardek.
    1. Installed Palm v4.2 [I found that I did not need to do this]
    2. Installed Palm v6.2
    3. Installed Palm Outlook 2007 [ didn't do this part either since I use Outlook 2003]
    4. Installed Bluetooth apps
    5. Inserted the ... dongle in the USB port #6
    [edwardek claims that he needed to use USB port #6 but my computer does not have a USB port #6. Instead it divides the many USB ports into Hubs. What' more important is that some software sets up the Bluetooth to transmit on a COM port. Mine was COM3. To see how your adapter software installed your Bluetooth devise, check the Device Manager in the Control Panel. It does list "Bluetooth Devices" where you can find the Device, right click, choose Properties, and see which USB port the Bluetooth adapter is in. However Device Manager also listed my Bluetooth under "Network adapters" and "Ports (COM & LPT)" which is important because I had to configure HotSync using Serical port COM3. I think it depends on the Bluetooth software you get.]
    6. In your PC tray (at the bottom of your PC display), Right Click Hotsync Manager and select "Settings" [Yes, you need to configure your computer's HotSync method.]
    7. Wait a long time (2 minutes) and the Hotsynch Manager window will be displayed. In that window click "Connection" and when the window opens click "USB" (a checkmark will then appear), then click COM (a checkmark will appear), under this you'll see a pick list drop-down menu showing all the ports. Select COM6.
    [I didn't have to wait at all for HotSync to display. Yes, check both USB and Serial connections and at this point a dialog box showed the Serial connection was COM3, matching what was in Device Manager. I suspect that some software actually creates a Bluetooth option that shows up in the Connections list like the instructions from PALM specify. My software didn't set up the Bluetooth device is this way and so I was totally frustrated by not finding Bluetooth on the Connections list.] 
    8. Next set up your Bluetooth application and make sure it is paired with your Treo (I'm assuming everyone knows how to do this but in essence you make sure the Bluetooth application sees your Treo (your name) and that your Treo sees your PC (the PC name). [Before this step you have to configure your Treo so Bluetooth is ON and VISIBLE and you can see your computer as a Device. I had a shortcut to my Bluetooth software in the PC Tray beside the HotSync icon. Once I had the Connections set for USB and Serial in step 7 and the Treo set up to be Visible, the computer saw my Treo using the name I had given the Treo.]
    9. From your Treo start the HotSynch, then on your Bluetooth application (Bluesoleil) right click on the Treo device and select connect. You should then see that the 2 devices are connected and the exchange begins. [Yes, start the HotSynch from your Treo.]
    It worked for me and hope this helps you sync your Treo and your Vista 64-bit. Thanks for everyone's input and help.

  • I have just downloaded a trial version of Photoshop Elements onto my Mac Book Pro (10.9.4) and attempted to use Elements on an existing Photoshop file.  I did not see the Elements option in my filter menu and need assistance

    I have just downloaded a trial version of Photoshop Elements onto my Mac Book Pro (10.9.4).  The installation to my hard drive went fine so I attempted to use Elements on an existing Photoshop file.  I did not see the Elements option in my filter menu and am uncertain as to how to "add" the Elemnts to my existing filter choices.  Please advise.

    I'm sorry but it's very hard to understand what you mean. What filter menu? In which program? Do you mean you're trying to use PSE as an external editor with some other asset management program? Which one?

  • I installed Elements 12 because my version of Photoshop (CS5.1) is not compatible with Yosemite. Now the Adobe Application Manager will not search for updates for any of the programs in CS5.5 that I have. How do I fix this?

    I installed Elements 12 because my version of Photoshop (CS5.1) is not compatible with Yosemite. Now the Adobe Application Manager will not search for updates for any of the programs in CS5.5 that I have. How do I fix this?

    '''Except 8.0.x version also supported version is 3.6.24 '''you can find it here:
    http://www.mozilla.org/en-US/firefox/all-older.html
    check the system requirements:
    http://www.mozilla.org/en-US/firefox/3.6.24/system-requirements/
    see also:
    [https://support.mozilla.com/en-US/kb/Installing%20a%20previous%20version%20of%20Firefox Installing a previous version of Firefox]
    thank you
    Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

  • Photoshop CC 2014 won't start but  I see Photoshop.exe running in Task Manager!

    I just updated Photoshop CC 2014 today - October 6, 2014, and it won't start. I does not give any warnings or errors. Windows 7 Pro. If I check Windows Task Manager, I see Photoshop.exe running, but it never opens on my desktop.

    Just so anyone that sees this will know the sequence of events:
    I updated Photoshop CC 2014 and many other CC updates today
    I restarted my machine (Windows 7 Pro)
    Clicked Photoshop Start Icon
    Photoshop did not start, but Photoshop.exe appears in Windows Task Manager (WTM) under Processes tab (approx. 8 MB of Memory used)
    If I click Photoshop Start Icon multiple times, multiple EXEs appear in WTM
    Tried right-clicking Photoshop.exe(s) and Ending Processes, then Running Photoshop again (same result)
    Restarted my machine a second time
    Now Photoshop CC 2014 runs
    I will add an update here if things change.
    Thanks for the help everyone!

Maybe you are looking for

  • Libraries, File Management, iTunes 11 and Windows 8

    I am using WIndows 8 and iTunes 11.  I have about 28 Gb of music files that I would like to separate into about 4 libraries.  The real issue is when I create smart lists, I am always having to remember to remove Christmas music from my selection.  I

  • IDOC scenarios

    Couple of things I don't understand I am doing a IDOC to File scenario On the R3 side I have created Partner Profile, Port, Logical System and RFC Destination and also a message type ON the XI side I have created a port and RFC destination. Now comes

  • HDTV as video monitor

    I just bought a HDTV to use as a video monitor with fcp5, as cinema display not through firewire. According to the manual I need to use the RGB HD15 cable to connect to computer, I can't use the HDMI converted to dvi and plug that direct. So with the

  • How to pass a parameter into a select statement using a bulk collect

    Using a cursors I can use execute immediate to pass a parameter to specify a table name. I have modified the procedure not to use the cursor. I am using a collection using a bulk insert into a nested table. How can I specify the table the table name

  • Iomega hard drive question -- please help!

    I am trying to use my iomega desktop hardrive usb 2.0 and the instructions are pretty clear up until the step where it says: "select the partition needed for your mac: GUID partition table for bootability on an intel-based mac computer Apple partitio