Extereme Issues..ha ha, no pun intended...with wireless, Uverse, Iphone

I just installed My Airport Extreme and am having a bit of trouble managing it, with my Uverse service.  I have read so much information on the topic and am unsure where to go.  At present, everyone in my house has internet access and since my wife works from home, I have been hesitant to make any changes.
I can get our MacBook Airs to connect to the n network through the Airport Extreme, and it seems to hold up, but if I go away for a bit or when I get up the next day, it has reconnected back to the Uverse network which is much slower. 
The airport extereme and Uverse 2 wire router are right next to each other, but seem to get a stronger signal on our ipads from the Uverse router..that was a surprise to me, though I submit, the visual representation of the wireless signals could be flawed. 
For the life of me, I cannot get an Express to hook up to the network and extend the Extreme's network...when that happens, I lose visibility to the Extreme on that network and can see it only on the Uverse network...so odd.
The most frustrating is that my iphone 4 cannot join the Extreme's network - even the slower b/g one..always says 'unable to connect'. 
That kind of trouble makes me hesitant to turn off the uverse wireless network and go all out on the extreme since I am having trouble with the iphone altogether and the macbooks holding the connection. 
I bought the extereme for the n speeds, for the back to my mac functionality (my wife travels often) and just because apple is our whole house.  I clearly am not qualified to do such a reorg on our wireless set up.
Are there quick tips, quick hits that I may be missing somewhere? 
any help would be greatly appreciated. 

I see... i can definitely understand that choice!
Though, If all of the products you are using are Apple's, there should really be no issues with connectivity. It's just a matter of getting things configured properly. Optimal setup would be to disable the wireless portion of your 2wire modem/router, thereby making it strictly a modem and not a wireless deterrent in your setup! Once that's done, you simply reset the Extreme and reconfigure it as the main router in Airport Utility.
When all is said and done... extending the network should be a cake walk with the other router out of the picture!
Post back if your stuck anywhere!!!
-Rich

Similar Messages

  • Issue in printing the batch document with the T-code COPI

    Issue in printing the batch document with the T-code COPI.
    So Batch document is not printing not printing.
    Kindly help.

    I would suggest to read this blog as a starting point: Asking Good Questions in the SCN Discussion Spaces will help you get Good Answers
    then rephrase and enhance your question with some facts because in the moment it is not at all sufficient enough for anybody to help you further on your particular issue.
    I am even in doubt that you posted this issue in the right forum, has this PP transaction really something to do with ABAP Connectivity. Check the space overview page of ABAP Connectivity , under the picture you can read what this space is about.

  • Known issues for OBIEE Office Add in with Excel 2007?

    Hi,
    Does anybody know if there are issues for the office add-in with Office 2007?
    i'm playing around a little bit to see how it works, but it seems that Excel interferes with the layout.
    I do get different grafs and also i tried the tutorial with the excel template and my changes come only partly through.
    Thanks
    Sandra

    Hi Sandra,
    Were you able to use OBIEE Office Add in with Excel 2007? I am planning to look at this compatibility. I am looking here to seeif anyone found issues with this setup..
    Thanks,
    Bharat

  • Is there an issue with Safari in Iphones and Ipads where it does not recognize option disabled="disabled" tag properly?

    Greetings everybody,
    I have run into a peculiar problem with the Safari browser on mobile platforms (IPad, IPod, IPhone) which I hope I can find a solution for in this community.
    I just launched a new website where I sell products with certain variations, for example please view this link: http://www.finerribbon.com/aegean-single-face-satin-ribbon.html
    On this particular product, the product variants are supposed to work in such a way where:
    If you select the value "1/8" from the "Choose Ribbon Width" field
    THEN
    The only options active and available to choose from in the "Choose Roll Size" field should be: 500 Yds, 20 Yds & Sample Swatch
    Now, if we browse to the above link in Safari using a desktop or a laptop, there are no problems at all, but if we browse to the above link using an IPhone or an Ipad, then we have a problem where all the options are available regardless of the values chosen, basically the above functonality does not work.
    I was told that there an issue with Safari in Iphones and Ipads where it does not recognize option disabled="disabled" tag properly, is this true? Can anyone advise me if there is a solution to this problem? I would sincerely apperciate it.
    Thank you very much for your time and help!

    Hi...
    I have run into a peculiar problem with the Safari browser on mobile platforms (IPad, IPod, IPhone) which I hope I can find a solution for in this community.
    Now, if we browse to the above link in Safari using a desktop or a laptop, there are no problems at all, but if we browse to the above link using an IPhone or an Ipad, then we have a problem
    At the top of this window you'll see the following:
    Apple Support Communities > Mac OS & System Software > Safari > Discussions
    This the Safari forum for the Mac OS X.
    Better that you post your topic here  > Developer Forums: Apple Support Communities
    I do see on my iPad what you are rreferring to. But you shoudl get the feedback you need in the developer forum.

  • I am running on OSX 10.10.1 and have a 2009 imac intel and I am having severe latency issues.  I am not familiar with macs as this is my home computer used by other family members.  Any help on how to troubleshoot why such latency issues?

    I am running on OSX 10.10.1 and have a 2009 imac intel and I am having severe latency issues.  I am not familiar with macs as this is my home computer used by other family members.  Any help on how to troubleshoot why such latency issues?

    When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Calendar issue with the new iphone 6 plus

    I'm wondering if anyone is experiencing a problem with the default iphone calendar for iphone 6 plus?  I have consulted with apple's tech specialist both in store and online and they can't seem to figure out what's wrong.   They have apparently forwarded the issue to the engineers.  As everyone may know, dots appear under the date if you have added an event to the specific calendar date then the elaboration of the specific event appears on the bottom linear view.  What i have been experiencing on my iphone 6 plus is that the dots disappear as i scroll further and further down to future months and when i do scroll back up the dots also randomly disappears with past months/events.  The elaborated event in the linear view is still there, however, when u highlight the date.  Why is that? We've already rebooted my phone, checked all possible settings issue, unsync then resynced it to icloud, resigned to icloud, reset all settings and even changed to a new phone (thinking it was a hardware defect) but the dots were still disappearing even with the new device.  I even turned off icloud on all my devices and just used the usb cord to sync it from imac to iphone! This nightmare is still happening even without icloud! However, it doesn't do that to my iphone 5! All dots with corresponding events appear on all weeks/months on my iphone 5 calendar.
    Hopefully, someone is experiencing the same issue with their default calendar on the new iphone 6 plus.    I tried my best to describe the issue, so i hope this made sense.  

    M glad I'm not the only one experiencing this!  Because when i spoke to apple techs it sounded like mine was an isolated case as they have not heard any complaints about this! I'll post something on this thread once apple techs have figured it out and get back to me! They initially put my icloud account on troubleshooting mode so they can look into it, however, it wasn't an icloud issue....so, they have yet to firgure it out!  I have already sent them screenshots of what my calendar was doing to my phone.

  • Since i got the new Iphone 4s it constantly drops calls. Apple have replaced the phone with another new iphone 4s but i am still having the same problem. I have checked with vodapohe that there is no issue from there end, given a new sim, still drops out

    Since i got the new Iphone 4s it constantly drops calls. Apple have replaced the phone with another new iphone 4s but i am still having the same problem. I have checked with vodapohe that there is no issue from there end, given a new sim, still drops out

    Have a look at this it might help
    http://support.apple.com/kb/TS4148

  • Restricting issue of goods to cost center with respect to material type

    Dear Users,
    I have a requirement like we want to restrict issue of goods to cost center with respect to material type i.e., we want to issue goods to cost center only through reservation and that too only for specific material types. Is there any standard solution for this, please provide your suggestions.
    Thanks,
    Manoj

    Hi Ajay,
    Thanks for valuable input.
    I also thought in the same line , but user has the following concern on this:
    Assessment Cycle: As per Users, it cannot be used because this will allocate based on allocation basis. But they need, the values that was posted at the time of transaction and as per materials. So it wont be accurate through Assessment cycle,
    OKB9: They have different Cost center for different valuation area for the same GL Account.
    Hence through OKB9 also, we cannot post directly to COPA.
    That's the reason the above option were not adopted.
    My other concern to this is:
    In CKM3, we have two lines under consumption, one for Normal sales PGI and other is Cost Center.
    After doing revaluation of consumption in CKMLCP, we see one line under Cost Center :Revaluation of Consumption Figure"
    My question, where can I see that figure whether in any table or in Cost Center report??
    If that is also available we can try to match those values and post to COPA.
    Let me know your thought on this.
    Thanks and regards
    Kami

  • An issue using the COM components supplied with SAP GUI 6.2 or 6.4

    We are having an issue using the COM components supplied with SAP GUI 6.2 or 6.4.  We used to have SAP 4.6c and now we have 5.0.  When we were on 4.6c, we used these COM components to logon and execute RFC calls and we had much success.  Now that we are on 5.0, we can’t seem to instance any SAP functions that have something to do with SAP Workflow.  We have experienced this problem when using VB6 or .NET, but our existing code that always worked is in VB 6.0.
    SAP Components used:
    o     SAP Logon Control
    o     SAP Function Control
    o     Librfc32.dll
    o     Other supporting C DLLs and/or COM object supplied with the SAP GUI installation.
    For example, if we want to call the RFC ARCHIV_CONNECTION_INSERT, this code fails in VB6 when the “Set objworkflow = objFuncCtrl.Add(strFunction)” line of code executes.  Instead of returning an instance of the object ARCHIV_CONNECTION_INSERT function, no object is created.  In 6.2, SAP raises no errors, but the object we are trying to create is still “Nothing”.  If we use 6.4, SAP raises an error “SAP data type not supported” via a message box and then the object is still = Nothing.  Interestingly enough, the 6.2 GUI COM controls don’t display the error dialog.  The message box that is shown comes from the SAP Function COM Object "SAP.Functions" (wdtfuncs.ocx).
    Now, what is interesting is if we use the same code to call a standard function or custom function that doesn’t have anything to do with SAP Workflow, then the code works fine.  Again, all of our code used to work just fine on an SAP 4.6 system.
    Here is the code that fails:
        'SAP Logon control - object for creating connections to an SAP system
        Dim objSAPLogonCtrl As Object
        'SAP connection object
        Dim objConnection As Object
        'Object that will represent the SAP function called
        Dim objSAP As Object
        'SAP function control object - object factory for creating other SAP function objects
        Dim objFuncCtrl As Object
        'Create instance of an SAP logon conrol
        Set objSAPLogonCtrl = CreateObject("SAP.Logoncontrol.1")
        'Create a connection object
        Set objConnection = objSAPLogonCtrl.NewConnection
        'Define connecion parameters
        objConnection.ApplicationServer = "sapvm"
        objConnection.SystemNumber = "00"
        objConnection.Client = "800"
        objConnection.User = "iissap"
        objConnection.Password = "tstadm"
        objConnection.Language = "E"
        objConnection.TraceLevel = 10
        'call the logon method of the connection object
        If objConnection.Logon(0, True) = False Then
            MsgBox Error
            Exit Sub
        End If
        'Create an instance of the SAP Function control object
        Set objFuncCtrl = CreateObject("SAP.Functions")
        'Set the function control connection object
        Set objFuncCtrl.Connection = objConnection
        'Function name to be generated and called
        Dim strFunction As String
        strFunction = <b>"ARCHIV_PROCESS_RFCINPUT"</b>
        'Create an instance of the function defined in strFunction
        Set objworkflow = objFuncCtrl.Add(strFunction)
        If objworkflow Is Nothing Then
            MsgBox "Could not create object " & strFunction
        Else
            MsgBox strFunction & " object created."
        End If
    If anyone has seen anything like this or has any ideas, please help!
    Mike and Hameed
    <b></b>

    Hi,
    documentation on the Scripting API is available at ftp://ftp.sap.com/pub/sapgui/win/640/scripting/docs/
    This API is a replacement of the existing, obsolete COM interfaces.
    Best regards,
    Christian

  • Randomly, text messages I send with my new iPhone 4S are delivered as all squares instead of text.  Any idea how to fix this issue?

    Randomly, text messages I send with my new iPhone 4S are delivered to the recipients as all squares instead of regular characters.  I have heard other people complain about this too.  Any idea how to stop it or why it is happening?  Hardware issue?

    There are a lot of posts in the forums today with people having problems with iMessage.   There was also a published outage yesterday, so it's possible there are still some issues that may be impacting you both.
    I would just wait it out - I'm sure it will be sorted out soon.

  • Issue is on BO 3.1, with FP1.1

    Issue is on BO 3.1, with FP1.1.
    Unble to click on "ok" button of confirmation message, when try to delete all 500 instances(set this limit in preferences), in history tab of the report.
    Tried redeploying CmcApp and Cmc AppAction war files, but no change...
    Can you please adviseu2026u2026

    Hi Siddhi,
    you may need to open a support case by SAP Business Objects about this.
    Regards,
    Stratos

  • I've got a death grip issue withe my new iphone 4s 16GB.

    I've got a death grip issue withe my new iphone 4s 16GB. When I touch lower left corner of the device signal goes down and NO SERVIS pops up. When I do not touch this part of device everything is fine.
    I am from Slovakia.
    I have unlocked device and using T-mobil / Telekom carrier.
    Please help me slove this problem. Thank you for any advice / response.

    get a case.  That's the solution.  Simple.

  • Is anyone having volume issues with the new Iphone 4S?

    Is anyone having volume issues with the new Iphone 4S?

    Yes, the volume on my iPhone 4s will max out without me touching any button or setting.  When opening mail, for instance, the ringer icon will appear and the volume level goes to max volume - and I'm not touching the volume buttons.  It seems to happen randomly, at least I can't identify a pattern, but thankfully it doesn't happen all the time, but at least once a day.  
    Anyone else seen this?

  • Rendering issue on Samsung S4 (specific models) with AIR app

    We have an Android/IOS app compiled with AIR 3.9. It works fine for all devices but some specific models of Samsung S4. First let me describe the device models & compilation details, as below:
    > Issue found on devices (given models only, on other S4(s) works fine):
         - Samsung Galaxy S4 (Model No. SGH-M919)
         - Samsung Galaxy S4 (Model No. SCH-I545)
    > Compilation:
         - AIR 3.9 (also with 3.8)
         - Render Mode GPU
         - Bitmap graphcis
    > Problem:
    There problem is with redering of grpahics speically which are masked. Either those masked graphcis doesn't display at all OR display in wrong layer (also distracted) when Display List realted to that object is manipaulated i.e. A child object is added to the parent of masked object & the masked object appears above it which was previously not visible. Some masked obejcts are not displayed at all.
    > Observation:
    It was same with CPU mode rendering however when the render mode is changed to AUTO the issue is resovled. But then app is preforming too slow as it uses all bitmap graphcis.
    It seems the specfic S4 models are using different type of GPU, though it should not create such weird issue. Can anybody suggest possible solution for this? OR have faced sismilar behavior on said devices ?

    Hi  Omi,
    Thanks for your reply for issue “Rendering issue on Samsung S4 (specific models) with AIR app”. My adobe account is [email protected]<mailto:[email protected]>, you can send your simple app to me by this account, now we are working on it.
    Thanks
    -Bo
    发件人: grosssmutttr [email protected]
    发送时间: 2013年12月28日 18:52
    收件人: Bo Tang
    主题: Rendering issue on Samsung S4 (specific models) with AIR app
    Re: Rendering issue on Samsung S4 (specific models) with AIR app
    created by grosssmutttr<http://forums.adobe.com/people/grosssmutttr> in AIR Development - View the full discussion<http://forums.adobe.com/message/5961441#5961441

  • HT201210 I m having problems with both my iphone 3gs and 4 when my cellular data is on and my battery is fully charge but out of suddenn it will shut off can i know how can i troubleshoot this issue thanks

    I m having problems with both my iphone 3gs and 4 when my cellular data is on and my battery is fully charge but out of suddenn it will shut off can i know how can i troubleshoot this issue thanks

    simply try doing a back up and restore
    when going thru the activation screen, select SET UP AS NEW and then test your device. if it is not shutting down then it could be 1 or more apps tht have been downloaded wch could be affecting the device
    you will then need to follow the process of eleimnation, meaning add 2 apps and then monitor your phone, if nothing happes then add another couple of them and then check
    good luck !!

Maybe you are looking for