External Blue-Ray Device

I've noticed around the web a few blue-ray external drives for PC's popping up, I know an iMac wont display HD but would it be possible to play the blue-ray disc through such a device since DVD's will be getting phased out sooner or later.
Thanks,

If you just want to use the BR disk for storing a large amount of data, as you would with a CD or DVD but with more capacity, yes. At least there are companies selling external Blu-Ray drives - OWC, for one - for such a use; I haven't used any of them so I can't say of my own knowledge how well they work.

Similar Messages

I have burned to my external blu ray burner 3 times, but twice ended up with glitches in the project. now it stops at 59% and won't finish sharing. How do I get it to finish sharing?

I have burned to my external blu ray burner 3 times, but twice ended up with glitches in the project. now it stops at 59% and won't finish sharing. How do I get it to finish sharing?

It's a complex project and there are a lot of possibilities. Among them is the length; there are a number of reports of projects that are approaching 2 hours failing to burn.
If it's a question of jarring Create Disk into action, one thing that has worked for some users is simply to click on and the Apply button (s) in the Settings pane of the Blu Ray Share window and then hitting Cancel. This can be tested by duplicating your project and selecting a tiny section of your sequence and exporting. Change the Output Device to Hard Drive and see whether Create Disk successfully writes a disk image.
You can also check that a specific clip isn't rendering properly. Since the process got to 59%, it may just mean that the burn couldn't be initiated by Create Disk – or it may indicate a problem with a clip toward end of your sequence. (If you can check the log, there may be something useful in there.)
Use the duplicated project and this time set a range for the last 30 minutes or so of the project and export it, using the Blu Ray destination. Again, set Output Device to HD and see whether it will complete.
Good luck.
Russ

External Blu-Ray drive for HP Envy Lightscribe Issues

My HP Envy 13-1100ea came with an HP external Blu-Ray drive (HP Part No: 538333-001) which identifies itself as an Optiarc BD ROM BC-5600S. In the HP Envy 13 service manual it mentions this drive as having Lightscribe functionality but I cannot seem to get the drive to be detected by the Lightscribe Control Panel or any Lightscribe labelling software. I have tried installing the Lightscribe software (older version) from the HP product support page as well as the latest software and diagnostic utilities direct from the Lightscribe site but nothing has seemed to work so far. Has anyone had any success burning Lightscribe labels with this drive or have any advice that might get things working?

The drive has the following logo on the bottom plate:
Which looks quite similar to the lightscribe logo, although it's not exactly the same. The HP Envy 13 support page does not contain drivers for the optical drive and I can't seem to find a dedicated support page for the drive itself. I have tried uninstalling the default windows driver which it reinstalls when the drive is plugged in again. As I said before it has been communicated in various place that the drive features lightscribe functionality and I'd be pretty upset if it turns out it doesn't!

Export to Blu-ray from Final Cut Pro 7 with LG BE12LU30 External Blu-ray

Hi all
I've got an iMac with Snow Leopard and I'm editing HD video in Final Cut Pro 7. I've created AVCHD discs on DVD to play in my Blu-ray player but now I want to create Blu-rays that will play in a regular Blu-ray player.
Has anyone got any experience of using the LG BE12LU30 External Blu-ray Re-Writer with FCP 7? I've checked other posts and it seems one user has had success with an earlier LG Model.
Basically if I connect this drive and use the Final Cut Blu-ray export option in share, will I be able to burn a playable Blu-ray?
Any help would be much appreciated!

Hi I have one of those drives too .. I use FCP to edit export the movie using 'current settings' and then import that movie Compressor .. alternative I also have Toast with the Blu-Ray plugin .. it gives a nice menu template and works well. http://www.roxio.com/enu/products/toast/plugin/overview.html

Looking for a external blu ray dvd burner for my mac

looking for a external blu ray dvd burner for my mac

There are plenty of options but I have found that the LaCie d2 http://blu-ray.burnworld.com/burners/lacie-d2.htm works more consistantly. I use Toast 11 mainly for Blu-Ray. The drive does come with a basic verison of the software which is good for most but you need to upgrade to do some serious authoring.

Is it possible to connect an external blue ray drive via USB with a mac mini to watch HD videos?

Is it possible to connect an external blue ray drive to a mac mini to watch HD videos? Iy yes, what additional software / hardware is necessary?

Saul in PA wrote:
There is some new software that allows playing:
http://www.macworld.com/article/160977/2011/07/blu_ray_movie_playback_comes_to_t he_mac.html
Did you even read the article you linked to?
Here's a quote from it
"The video itself looked fine when it played properly, but it stopped and started constantly, and often displayed with huge, ugly artifacts. And at times, the app would freeze completely and require a force quit.
Just to make sure it wasn’t a problem with one Blu-ray disc, I tried some others. With Hot Tub Time Machine the results were much, much worse. It got a few seconds into the United Artists logo before the movie and completely froze playback. On several attempts. With David Cronenberg’s The Fly, playback was generally better—but the software played the ‘making of’ movie instead of the actual film. I thought there might have been a preference to help with the movie selection, but—wait for it—the Preferences item didn’t do anything when I selected it."
Not very promising is it

External Blue Ray Player

Can you suggest a good external blue ray player drive that is compatable with Macbook Pro and avaiilable in the United States?

Define compatible. Actually, define what exactly you want to do. Play back a Bluray on the display of the Macbook Pro? Not possible. Or do you just want to record things onto a Bluray disc?

Using an external Blue Ray Disc Drive/Burner with an imac? Can I? Brand?

I have a blue ray player in the living room and I'm just starting to research burning blue ray discs using the imac.
I have an intel based imac, 2.8ghs intel core 2 duo, 4gb sdram, 1tb hard drive.
Should I be able to safely use an external blue ray burner?
If so, recommendations as to a product?

there is no official support for blue ray drives in leopard. Steve jobs said blue ray is "a bag of hurt" referring to the licensing issues for blue ray.
As a result there is no recommended drives as they are not officially supported.
I can't recommend either as I don't use Blue ray yet.
A quick google brought up this
http://www.tuaw.com/2007/01/25/blu-ray-arrives-for-the-mac-wheres-hd-dvd/
Judging by your list of gadgets below your post, it won't be much good as it is for the Mac Pro
All I can say is that Snow Leopard may bring better support for Blue Ray, all you can do is hope!
Regards

Looking for best External Blu-ray recorder working with fcpx 10.0.6

Hi. I'm looking for a good External Blu-ray recorder that will run with FCPX 10.0.6 on my Imac 27" mi-2011 3.4 GHz i7 16 Go of RAM.
Thanks!

Any Mac compatable Blu Ray drive will do, they're all about the same quality these days. Try this.
http://eshop.macsales.com/item/OWC/MRSSBD6X/

Will Adobe Encore CS4 burn MTS files to an external blue ray burner if I buy one?

Will Adobe Encore CS4 recognize/burn MTS files to an EXTERNAL blue ray burner if I buy one?

Internal vs external should not matter.
I have a burned to external with CS4, but it was a long time ago.
And most importantly, Encore is not a reliable burner for many users, and they, and I, use imgBurn rather than Encore to burn.
Also, "burn an MTS" file is totally different from authoring and burning. Encore (was it by CS4?) added a limited AVCHD passthrough option. I have not used it.

My iMac Keeps on try to boot on my external Blu-ray disk drive

My iMac Keeps on try to boot on my external Blu-ray disk drive and not the hard drive. Therefore when I turn it on, it boots up and then it go pass the sound and the apple logo come up on screen but then it frezzes and noing happens; even if I hold down the power button.
System Software Overview:
Boot Volume: Macintosh HD
Boot Mode: Normal
It should not boot off the Blu-ray read/wrigt.
iMac from 2013 Q1
Blu-ray is LG read/wrigt for Blu-rays, HD DVDs, DVDs and CDs pluged in by USB

Boot into safe mode (restart holding down SHIFT key). If no KP, then uninstall and reinstall those 3rd-party items that Roger pointed out, one at a time, and restart. Continue until you determine which ones are causing the problem. If KP while in safe mode, then most likely hardware related. Run the Apple Hardware Test suite, extended tests at least twice, followed by Rember. See
OS X About kernel panics,
Technical Note TN2063: Understanding and Debugging Kernel Panics,
Mac OS X Kernel Panic FAQ,
Resolving Kernel Panics,
How to troubleshoot a kernel panic, and
Tutorial: Avoiding and eliminating Kernel panics for more details.

Buffalo MediaStation External Blu-ray Burners?

Hello,
Just wondering if anyone has had any experience using a Buffalo MediaStation External Blu-ray burner with their mac?
Cheers,
James

Yeah, I already read this one.
The review is good, which is the main thing that prompted me to consider this drive, but I always like to get some feedback from average users about little issues that often crop up in the real world.
Unfortunately the forum conversation that follows this particular review is less about the drive itself and more about other issues. No one said, "I have this drive and use it with a mac and I think it's . . . "

Bought an external blue ray player/burner

would like to know how to get a movie to play with an external blue ray/burner on a hp mini 210

Install Cyberlink's Power DVD 10 (it's free for HP owners) _ save the file to the desk top and install it from there, not from a temporary folder.
Make sure and have your external drive plugged in before you install Power DVD10.
ftp://ftp.hp.com/pub/softpaq/sp58501-59000/sp58764.exe
Restart after the installation and do not unplug the external drive.
For the first time use the eject button on the drive and let the movie load automatically (give it some time) with out opening Power DVD10.

I have a late 2013 27" iMac, can anyone recommend a really good external blu-ray player?

Hi,
I recently purchased a stock late 2013 27" iMac and I'm looking to purchase a really good external blu-ray player. I would prefer a Samsung USB 3.0.
Thanks!

There are many solutions for watching BLU-RAY MOVIES on MAcs.
One is to download Bluray for Mac ... with a blueray player, this little player plays most bluerays perfectly.
You can download a trial for free here: http://www.macblurayplayer.com/
Second, You can get a program called MAKEMKV and use it in combination with VLC PLAYER to convert BLU-Ray to MKV format or STREAM from LOCAL NETWORK FAST to watch Blue Ray Free!!!!
GET MAKE MKV here: http://www.macupdate.com/app/mac/34693/makemkv
And VLC PLAYER HERE: http://download.cnet.com/VLC-Media-Player/3000-2139_4-10210434.html?tag=mncol;tx t
There are videos on YOU TUBE to show you how to use MAKEMKV and VLC together.
Also, I just purchased a SAMSUNG Ext. SLIM Bluray writer for under $100 that works great for playing and burning Bluray Disc!
Good Luck

Premiere Elements 11 no longer recognizes my external blu-ray burner.

I have used my Samsung SE-506BB-TSBD external burner many times before today, but for some reason Premiere Elements 11 is not recognizing it. Windows 7 sees it just fine. Premiere Elements 8 (which is still loaded on the same computer) also does not recognize it.
What do I need to do? Samsung's website is no help, but I have a feeling it's an Adobe issue since Windows 7 still recognizes the drive.

rbcourter
When is your Blu-ray burner not recognized
Premiere Elements 11: burn to DVD disc, burn to Blu-ray disc, burn to AVCHD on DVD disc, or all?
Premiere Elements 8.0/8.0.1: burn to DVD disc, burn to Blu-ray disc, or both?
and when you wrote:
I have used my Samsung SE-506BB-TSBD external burner many times before today
Did "....many times before today" imply that you could use the burner for Premiere Elements 11 and 8.0/8.0.1 before. I am trying to get a whether this is a "it worked before but now" or a "it never worked before" type issue.
Do you have the USB 2.0 cable connected to a USB 2.0 computer port directly or via a USB multi port hub? I take it that this burner does not have AC support? If you are using only 1 USB 2.0 port, can you set up the burner for 2 USB 2.0 ports?
Does the computer involved have an internal burner? Or is this the only burner that you have available to you external or internal for the computer?
Let us start here and then decide what avenues of further troubleshooting are available to us.
Thanks.
ATR

External Blue-Ray Device

Similar Messages

Maybe you are looking for