External CDR report

Hi;
Is there an external program for CDRs reports ?. The only one I know is the Veriphy, but high price and only need to see the destinations that some are calling Annex (DN) specific.
thank you.

Hi andinonet,
Cisco has new product Cisco Prime Collaboration Assurance (PCA) other than CDR it does has few additional feature. Check below datasheet
http://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/prime-collaboration/datasheet-c78-731660.html
HTH,
Regards,
Mohammed Noor

Similar Messages

Error while importing external Crystal report in SAP Business One

Hi Experts,
while importing External crystal report in SAP Business one i was unable to import the report and it is not displaying any error message or success Message but after completion if i click on the report i am getting an Error as
No Matching Records Found 'Queries' (OUQR) (ODBC-2028) Message[131-183]

Hi,
Please refer SAP note:
1532509 - Cannot import Crystal Report template into SAP Business One
Thanks & Regards,
Nagarajan

CDR report not working

Hi,
We have LYNC 2013 and Monitoring is enabled. the CDR report is not working. even User Activity summary for telconferencing and for audio, reports not working.
Kindly suggest troubleshooting steps.
Can we have any SQL query to fetch the report from database?
Thanks
jitender

Hi Raju,
From Monitoring server , CDR report is not working. Even "User Activity Report" not working and giving below error for "Telephony Conference" and as well for "A/V Conference"
" No results match the report filters. Change the filter values and submit the query again."
Thanks
jitender

How configure sending CDR reporting via ftp server

hi
i want to send the CDR reporting automaticly to FTP billing server each 1H.
i have add the billing server
i don t know how or when can i configure the automatique sending CDR report to this server
Thanks for your help

You'll need a SFTP server instead of FTP.
For instructions, please see here:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/service/7_1_2/admin/sacdrm.html
Thanks!
Michael
http://htluo.blogspot.com

CDR report problem in Operations Manager/Service Monitor 8.7

I'm testing Operations Manager/Service Monitor in lab right now and got a little problem.
When I configured everything from the begining I could do CDR reports and saw all calls in them but I renamed the cluster so it wouldn't just say StandAloneCluster. Everything except CDR Reports seems to work.
I can see that the data is sent from UCM to Service Monitor but if I try to maka a report it just says no records.
Is there any logs I can check to find out what i happening?

I found the problem, Even though I had applied config on the UCM after changing the name from StandAloneCluster to another name the calls in CDR were slill saved with cluster name StandAloneCluster.
Since this is a lab and I didn't have time for troubleshooting I restarted the publisher and after that the calls were marked with the new name and I could find them in the reports again.

CDR report for CIPC

Hi All,
Good evening. I have a query. Can we pull CDR report for a persons IP communicator separately and the desk phone separately from call manager?
Regards
Sankar.

No, assuming they're a shared line, you'll get all calls from that line in the report.
If they're separate lines, just run a report on each DN.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

CDR Report

Hii all,
I am using 2 CCM 5.1( MCS7835 server)in different cluster and 7906G IP phone. some IP Phones registered in 1st cluster and some ip phones registered in 2nd cluster. Now when I am going to generate the call report by CDR, it is displaying unspecified user in user name column for those call which came form another cluster.though every Ip phone having a User ID.
I am attaching the report which I generated through CDR. please find the attachment.
and I also want to display the destination name in report sheet.
is it possible? if possible , please suggest me as soon as possible.
thanks & regards
Soma

Depending on the verison of CCM that you are running and if you have CDR recording turned on, you should be able to pull this information directly out of SQL.
If you ran the query against the CDR database: select * from CallDetailRecord where callingPartyNumber = '122'
This should give you all of the outgoing calls that this extension made. You can even narrow it down by adding in some time constraints to the query.
Also, you could use CAR if you have that enabled. It will give you a nice GUI to use instead of doing a direct query on the DB.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/srnd/design/guide/managcme.html From this doc;
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_implementation_design_guide_chapter09186a00805f07a8.html#wp1077193
Logging CDR to External Servers
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/srnd/design/guide/managcme.html#wp1076118

External user report

How can i create a report showing the where external users have been granted access to content in each of the sites in our tenant?
Dean MCTS-SQL 2005 Business Intelligence, MCITP SharePoint 2010

This option is not available for SharePoint online but it is available on premise.
If you find this information helpful then please propose this as answer and vote.
Thanks.

Advice Bank Statement and External Reconciliation Report

I am looking for suggestion on how to prepare a Bank Reconciliation Report for Checks in Crystal Report. I have short listed Tables ORCT and RCT1 for Incoming Payments and OVPM and VPM1 for Outgoing Payments. My main concern is how to differentiate between Reconciled and Non Reconciled Checks. As Seen under Banking -> Bank Statement And External Reconciliation-> Manual Reconciliation Under cleared column.

You can go to Administration> System Initialisation>Company details> basic initialisation> (check) Bank Processing.
Also, you need to do a few set ups before you start using the bank statement facility. You can find this in SET Up> Banking> Bank Statement Processing.
When you check this, you would be able to see the Bank Statement Processing Form in the banking module.
all the information that you might need for the Bank Statement Processing for versions A and B can be found in the Portal under the following path:
SAP Portal -> Support -> Documentation Resource Center -> Modules and Features -> Bank Statement Processing (BSP)
Hope the documentation helps you.

CDR Reports only inbound call reports are coming

I am running a call manager 4.0(2). The CDR services are running fine , but still I am getting the reports only for the inbound calls, The CDR for outbound is not showing.
TIA

Make sure you have the following parameters in the PUB and the SUBs:
Service -->Service Parameters:
1. CDR Enabled Flag -->True
2. CDR Log Calls with zero duration flag-->True
3. Call Diagnostics Enabled -->True
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a0080182151.html

External monitor reporting no signal despite detection in xrandr

I've installed Arch and xfce4 on my Macbook Pro retina 10,1 (2012). I'm trying to set it up with my Asus PB278Q external monitor.
When I run xrandr, I get this output:
Screen 0: minimum 8 x 8, current 4800 x 1800, maximum 16384 x 16384
DP-0 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)
HDMI-0 connected 1920x1080+2880+0 (normal left inverted right x axis y axis) 600mm x 340mm
1920x1080 60.00*+ 59.94 50.00 29.97 25.00 23.97 60.00 50.04
1680x1050 59.95
1440x900 59.89
1280x1024 75.02 60.02
1280x960 60.00
1280x800 59.81
1280x720 60.00 59.94 50.00
1152x864 75.00
1024x768 75.03 70.07 60.00
800x600 75.00 72.19 60.32 56.25
720x576 50.00
720x480 59.94
640x480 75.00 59.94 59.93
480x576 50.00
480x480 59.94
DP-2 connected primary 2880x1800+0+0 (normal left inverted right x axis y axis) 331mm x 207mm
2880x1800 59.99*+
DP-3 disconnected (normal left inverted right x axis y axis)
DP-4 disconnected (normal left inverted right x axis y axis)
So the external monitor is being detected by HDMI-0, but my external monitor is reporting no signal (and yes input is set to HDMI on the monitor). Also strange that xrandr is reporting it as 1080p but it's actually 1440p.
The wiki on multihead tells me to use the xrandr command along these lines:
xrandr --output HDMI-0 --auto --right-of DP-2
And this does move the external screen around, as in my mouse can move off my laptop screen where I've positioned the external screen, but there's no signal.
My graphics card is GeForce GT 650M; I have the nvidia package installed. I tried looking this up, but I couldn't find anyone talking about the monitor being detected in xrandr but there being no signal back to the monitor. Also in the xfce display settings, it has grayed out the option to mirror the displays, not sure if it's that indicative of whatever I'm missing.

I have some new information. I tested it on a Viewsonic 1080p monitor I had with a VGA-to-Thunderbolt adapter. This worked perfectly straight away. So I tried the same connection for the Asus monitor and it too worked perfectly.
So I know I'm lacking something with HDMI. I'd still like to solve this because the VGA connection is capping my resolution at 1080p.
$ lspci | grep VGA
01:00.0 VGA compatible controller: NVIDIA Corporation GK107M [GeForce GT 650M Mac Edition] (rev a1)
$ lspci | grep HDMI
01:00.1 Audio: NVIDIA Corporation GK107 HDMI Audio Controller (rev a1)
Am I missing some sort of HDMI compatible controller for my graphics card? I installed the nvidia package as the wiki tells me to do, and I'm not sure what else is needed.

Error while previewing external crystal report in SAP B1

Hi Experts,
when i was previewing a Crystal report in sap business one i was facing an error as
no matching records found 'Queries' (OUDR) (ODBC-2028) message[131-183]

Hi Megganath..
Check with this note
http://service.sap.com/sap/support/notes/1532509
1532509 - Cannot import Crystal Report template into SAP Business One
Regards
Kennedy

CDR Report in PDF Format

Hi,
My CCM 3.3(4) doesn'r generate the reports in PDF format, only Excel and no error log in the Event Viewer. Acrobat is installed on the CCM. Any Ideas,
regards,
samir

I reinstalled Acrobat and it's working fine now,
thx,
samir

CDR reports question

Hello, We are running CallManager 5.1.1.3107-2 and have CDR enabled. When i log into CAR and try and retrieve anything it gives me a 30061: Data is not available in database.
I thought i configured everything correctly on the servers.
Does CDR need to be enabled on both Publisher and Subscriber?
Thanks,
Greyson Morrow

"Enable and configure CDR collection through service and enterprise parameters that are set in Cisco Unified CallManager Administration. You must enable CDR collection on each Cisco Unified CallManager in the cluster for which you want to generate records."
Reference:
http://www.cisco.or.at/en/US/docs/voice_ip_comm/cucm/admin/5_1_3/ccmsys/a10tools.html
-Don

Passing parameters to external Crystal 2008 report

I have to invoke the viewer.reportsource twice in order for the parmeters to a Crystal Report to take effect.
Here is my environment:
CR 2008
VS 2005
VB
SQL Server 2008
External Crystal Report
I am using the Report Document Object. Here is the code I am using
' The following is a Class used to configure a Crystal report Document
'    Structure struRptParms '
        ' This structure will be used to hold Crystal Reports Parameter Keys and Parmeter Values
        Public strRptParmKey As String
        Public aryRptParmValues As ArrayList
    End Structure
    ' aryRptParms is an ArrayList property of this class that contains the ParmKeysAndValues for the report
        ' Step 1 - Instantiate a Crystal report document for the Report and then
        '           load the report into the report document
        '   a) instantiate the ReportDocument class.
        docCrystalReportDocument = New ReportDocument
        '   b) Load the report by a Call to the Load() method of the ReportDocument instance
        '       and pass it the reportPath string variable.
        docCrystalReportDocument.Load(strRptPathAndName)
        ' Step 2 - Create the links to the Data Source for the Report
        '   a)instantiate the ConnectionInfo class
        Dim myConnectionInfo As ConnectionInfo = New ConnectionInfo()
        '   b) set the ServerName property of the ConnectionInfo instance.
        myConnectionInfo.ServerName = strRptDataSource.ToString
        '   c) Set the DatabaseName and IntegratedSecurity properties of the ConnectionInfo instance.
        myConnectionInfo.DatabaseName = strRptDataBase.ToString
        myConnectionInfo.IntegratedSecurity = True
        ' Step 3) Connect the report to the datasource by entering a call to the
        '           SetDBLogonForReport() method, by passing in the ConnectionInfo instance and the Crystal report.
        SetDBLogonAndDataSourceForReport(myConnectionInfo, docCrystalReportDocument)
        ' Step 3a) Connect subreports to the datasource by entering a call to the
        '           SetDBLogonForReport() method, by passing in the ConnectionInfo instance and the Crystal report.
        Dim mySubReportDocument As ReportDocument
        For Each mySubReportDocument In docCrystalReportDocument.Subreports
            SetDBLogonAndDataSourceForReport(myConnectionInfo, mySubReportDocument)
        Next
        ' Step 4) Pass the parameter keys and parameter values to the report by calling
        '           the SetParameterValue() method from the Report Document class. Do this for
        '           each instance of parameter keys and values passed in via aryRptParms property
        Dim struMyRptParms As New struRptParms
        For Each struMyRptParms In aryRptParms
            docCrystalReportDocument.SetParameterValue(struMyRptParms.strRptParmKey.ToString, struMyRptParms.aryRptParmValues.ToArray())
        Next
        ' Step 5) Connect the Crystal Report to the report viewer by binding the ReportSource property of the
        '       CrystalReportViewer to the ReportDocument instance
        Me.vwrCrystalReport.ReportSource = docCrystalReportDocument
        Me.vwrCrystalReport.ReportSource = docCrystalReportDocument

Jonathon,
Thank you for reading my post and taking the time to reply.
The report design does not have Save Data turned on.
I moved the parameter passing before logging on to the data base - that did not fix the problem.
Thank you again for taking the time.

External CDR report

Similar Messages

Maybe you are looking for