External Charger for iPod touch?

Hi. I got a doubt. Did my old external charger (it works perfectly with my old iPod Photo) works with the new iPod Touch? I'll apreciate any answer. I didn't know if plug it or not. The charger has the same voltage (5V), so I suppose that it gona work just fine.

any ipod charger should work fine. if you are talking about the one that came with the ipod photo, yes that should work.

Similar Messages

  • Portable power charger for ipod touch/classic

    I found this online; http://www.sourcingmap.com/black-travel-charger-pack-for-apple-iphone-ipod-p-405 93.html
    & again on another website; http://www.uxsight.com/product/36886/black-travel-charger-pack-for-apple-iphone- ipod.html
    what does anyone think to these? I am looking for a charger that is compact, as most AC power adapters are squarish shaped & too bulky to carry in a little kit.
    has anyone used one of these? are they reusable? or are they meant for a one time emergency charge? where do they get their power from to charge the ipod? are they worth the $17.00 odd dollars? would they work for my ipod touch 2and gen 8 gb, & my 160gb 6th gen ipod classic?

    They come with a cable that connects to a charger, this device is in essence a spare battery. You have to charge it from the wall.
    I prefer this one as a wall charger:
    http://store.apple.com/us/product/MB352LL/B?fnode=MTY1NDA4NA&mco=MTM3NDk1MjI

  • Multiport charger for Ipod touch

    We have an application were we are using many Ipod Touch. For the most about 30. I am locking for a solution were I can charge many IPods in parallell. One charger for say 5 ipods or more. I have tried to use an USB hub connected to a Mac but it doesnt always work so well. I often get the error message that this device isnt supported.
    So can anyone give me a suggestion of what to use.
    Regards
    Per Liljeqvist

    They will both work with iPod Touch. If you want to use it with an iPad also, then you must get the 2.1 amp.

  • Please help : external mic for ipod touch 4G?

    hye,
    so I'm not an audio professional, just a student wanting to quality-record lectures.
    I understood 4G ipod touch only accepts mono recordings, which is fine with me (it's just for voice...).
    Now, what external microphones are compatible with my ipod touch (running iOS 5.0.1.) for improving audio recording?
    Would adding adding a deadcat fuzzy be helpful (maybe it'll reduce the recording's size?).
    Thanks for any help on this!

    - See if this program will place it in recovery mode since that erases the iPod and bypasses the passocode.
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    - Next try letting the battery fully drain. The try again.

  • Mains charger for ipod touch

    I have a mains charger for my ipod nano 6th generation, can i use it with my new ipod touch 32GB and my husband's 64GB?
    I know that they are all ipods, but is the charger unit the same?
    Thanks for your help!

    Yes the charger of the 6G Nano will be fine. Only the chargers for very early Ipod might not work since they uses FireWire.

  • Recommendations for speakers / charger for iPod Touch?

    Love my new iPod Touch that came basically for free with the new MBP, and I want to do justice to the tunes.
    There seems to be a lot of choice for a combination speakers and charger. Any suggestions? If the device includes a radio, that's great too; but I don't necessarily need an alarm.
    Main criteria: very good sound quality and efficient charging.
    I appreciate any suggestions and advice that you offer.
    Thanks,
    Dennis

    With no doubt
    B&W zeppelin
    http://www.bowers-wilkins.com/display.aspx?infid=2466
    I love iPod HiFi but Apple stop producing, the rest of products are just a computer speakers ....... nothing close to the audiophile level.
    Always trust your ears

  • Charger for ipod touch(4th Gen)

    Buying an ipod touch(4th Gen) 32GB as a gift.  looking at Belkin USB power adapter chargers. they have 1 AMP or 2.1 AMP.  which would be apprpriate or would they both work?

    They will both work with iPod Touch. If you want to use it with an iPad also, then you must get the 2.1 amp.

  • Recommend an external mic for iPod touch 4g

    I bought a Mikey which I now learn is not compatible with the 4th gen touch. Any suggestions? I couldn't find anything that resembles the Mikey, which is what I would prefer, as opposed to a more conventional shaped microphone.
    Thanks!

    http://en.wikipedia.org/wiki/Ip_address

  • How should I charge my iPod touch 4th generation for the first time?

    How should I charge my iPod touch 4th generation for the first time?

    Charge to 100% ...
    Read here > Apple - Batteries - iPod
    And here > Accurately determine your iPod battery life
    Save this link in case it needs service in the future >  Apple - Support - iPod - Service FAQ

  • I 'm a novice..if i downloaded a free siriusxm radio app for ipod touch,are there any charges i.e. data etc.?

    i'm a novice..if i downloaded a free siriusxm radio app for ipod touch,are there any charges i.e. data etc.? or is it free

    You have to have the special SiriusXM account for listening and you must have a regular SiriusXM subscription. Cost is around $15.00 per month. The Live365 app only requires a $7.95 per month subscription and provides much more than SiriusXM.

  • Dear Apple what will happen if I charged my iPod touch 5 gen for 9 hours?

    Hello. Apple .. What will happen if I charged my iPod touch 5gen for 9 hours?

    Charging for 9 hours will not damage the iPod. Charging stops when the battery reaches 100%.

  • IPad charger used for iPod Touch, now won't charge iPad

    Hello everyone! I need help. :( This is what happened. i charged my iPod Touch with the charger that came with my iPad 2 and the iPod charged okay. Now I connected the charger to my iPad and there was no response at all (no charging or not charging sign).
    This is the second time this happened. The first time was when my aunt used the iPad charger for her iPhone 4 which charged okay. When I used it for my iPad after, it did not work as in now. What I did the first time was connect the charger's detachable head (see image http://www.thefonestuff.com/product_images/c/441/MB706_AV1__57136_zoom.jpg) to a Macbook charger. The Macbook charged okay and when I reconnected it to my iPad, the iPad began to charge as usual.
    I don't understand what happened. Was the charger somewhat "inactivated" in both instances because it was connected to a device that required a different amount of power? Without the Macbook charger, how can I "restore" the charger to its "iPad-optimized" state?
    Thank you for your reply!

    Icedgreco-
    Changing the detachable head and changing it back, might wiggle an internal connection that is loose inside either the charger or the head.
    It is also possible your charger cable has a bad connection.  Either way, I think you need to contact Apple about it.
    Fred

  • HT201412 even after all night of charging my ipod touch is running out of battery whithin 5 minutes of it being on, why is this?

    even after all night of charging my ipod touch is running out of battery whithin 5 minutes of it being on, why is this?

    Try the following to rule out a software problem.:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still that short of life ake an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Can't install iPhone 2.0 Software Update for iPod touch

    I am trying to download the iPhone 2.0 Software Update for iPod touch from http://www.apple.com/ipodtouch/whatsnew.html so I can download apps for my new iPod touch. (Although it is pretty bogus that I should have to pay $10 for an upgrade on a brand new device so that I have the privilege to buy apps). I have iTunes 7.7 already installed.
    When I click on the link https://phobos.apple.com/WebObjects/MZFinance.woa/wa/touchLandingPage , I do not get a download, and iTunes does not open. Nothing happens if I open iTunes before trying this link either.
    Instead, I get a brief page which says "One Momemt Please". Connecting to the iTunes Store. Loading... If iTunes doen't open, click the iTunes application in your Doc or Windows Task Bar" , then my browser is redirected to http://www.apple.com/itunes/affiliates/download/?itmsUrl=itmss%3A%2F%2Fphobos.ap ple.com%2FWebObjects%2FMZFinance.woa%2Fwa%2FtouchLandingPage%3Fign-mscache%3D1 which tells me to download iTunes... but I already have iTunes installed.
    I installed (then uninstalled, reinstalled) the latest iTunes (7.7.0.43) and the problem persists. iTunes works fine for all other uses.
    I have the problem with both Firefox (3.0) and Internet Explorer (6)
    How can I download and install The iPhone 2.0 Software Update for iPod touch directly from iTunes? I cannot find it when I search for it. It is not listed in the App store.
    (P.S. The web support form does not work when I tried to fill out a problem report for "Connection" issues. Although I filled in all form fields, it would not send the report, telling me I did not fill in a field.)

    The upgrade now appears directly in iTunes, so I do not need to access it from the web page. I see many others are encountering problems installing the upgrade, so I'll see how it goes...
    There is no answer to the initial problem that iTunes install does not configure the browsers to handle the itmss:// protocol.
    I still think Apple should not charge for this for a brand new iPod purchased just this week.

  • Computer has different name than Itunes for Ipod Touch

    I have an Ipod Touch 4th Generation 32gb. I have had no problems with it or with Itunes. My Mom came last Saturday to visit and she needed to charge her Ipod Touch so I hooked it to my computer where I always have a cord and charged it for about 45 minutes or so. I have no problem with my Ipod or with Itunes BUT when I go look at the device now on my computer,when it is connected to USB cord, it show "Marys Ipod" now instead of "Steves Ipod". In Itunes, it is still "Steves Ipod" and I can sync and all but I really want to get rid of "Marys Ipod" off my computer even though when I open it up, it is my ipod, just mislabed. I know because it has my pictures and her's is only 8gb. My Ipad2, is fine when I hook it up to the USB cord, It says "Steves Ipad" but when I hook my USB cord to my ipod touch, it still reads "Marys Ipod". Is this something I should be concerned about or is it not worth the hassle of trying to restore, etc? I have tried to change the name, but Windows won't allow. I do have Windows 7. I have also got the new update on Itunes and the new software(5.0) version.
    I am stumped. I have googled this and have searched for over 3 hours today on how to fix this. Ready to bang my head against the wall. I have did a reboot on Ipod, I have restarted the computer. I have not reinstalled anything including Itunes.
    Does anyone have any suggestions on what I can do? I would sure appreciate the help. Thanks in advance.

    shellymoe
    Currently Being Moderated  Re: Computer has different name than Itunes for Ipod Touch
    Jul 22, 2012 12:23 PM (in response to Toploader21120)
    I just found the answer to this after hours of searching online. Make sure your iPod is hooked up to your computer & turned on.
    Click on "Start" and in the search box type "regedit". This will display a program called "Registry Editor". Open it.
    Click on the "Edit" tab and select "Find...". Type "Mary" in the search box and click "Find Next". It will bring up a list of everything that has "Mary" in it. (You may have to click on "Find next" under the "Edit" tab in order to find the associated items that have something to do with both "iPod" and "Mary".) What you need to pay attention to is not the NAME, but the DATA column. For me, the wrong iPod name was listed in 2 places in the data column. The actual names of those 2 items were "FriendlyName" and "Label".
    Once you find the associated items that have to do with both the iPod and "Mary", right click on one of them. Select "Modify...". A box will open giving a "Value Name" box and a "Value Data" box. The "Value Data" box should say "Mary's iPod". All you have to do is change it to "Steve's iPod" and click "OK". Repeat the "Modify..." and renaming of the "Value Data" steps for every item that says something about "Mary's iPod".
    Close the Registry Editor. Open "my computer" and see that it changed the name of your iPod back to "Steve's iPod".
    Best Answer So far.....it really works...Thanks a million

Maybe you are looking for

  • Itunes 11.0 will not quit

    Just installed Itunes 11.0 onto my macbook pro (early 2010) and itunes will not quit, it keeps opening itself if i quit it. Any help would be much appreciated. Thank you.

  • Create new repository in db 11.1.0.7.3

    Hi I am trying to use RepManager from a Grid Control v10.2.0.5 (fully patched) home to create a new Grid Control repository within a Database v11.1.0.7.3 (fully patched) and it falls over stating the following error on screen: Repository Creation fai

  • Biller Direct Issue  BP not released

    We have performed the configuartion for Biller Direct. When we log on we get the following error message You are not authorized to execute this function, as your business partner has not released it for you. Has anyone seen this before, if so how do

  • Error when building PDA project 'Unsupported control - Knob, 680'

    Hi, I'm developing an application for my PDA (8.2 LabVIEW version) which was in the past running in my laptop with the 7.1 version of LabVIEW. I'm working step by step and as soon as I inserted an own subVI an error occur. This own subVI containes al

  • JavaDB connection URL db jar

    I'm trying to specify a jar file in my connection url for javadb so I can access a DB already created by JavaDB. I came across this information on a java pages: All connection URLs have the following form: jdbc:derby:<dbName>[propertyList] The dbName