External connector for 3G IP...

Recently I bought an attachment for my IP (iBreath). It's a digital breathalyzer and also a FM transmitter for music to a FM radio. The unit plugs into the charging port on the IP for power ONLY. The problem is that with my outer shell, I can't get the iBreath unit to mate fully with my IP to power the unit. The male on the iBreath just won't go in far enough.
Does anyone know of an extension that I can plug into my IP and then plug the iBreath into that? The only other avenue I have to correct this problem is to cut the bottom of my outer case off which would look a tad messy or go shell-less or find another case that is more open on the bottom. Right now I'm going bare which actually is kind of nice, but soon or later, I'll probably drop the IP and I'm worried about dents or internal damage.

My external batteries don't have this problem because they come with a cable with the standard charging plug on one end and a mini USB plug that goes into the battery. The problem with my iBreath is that the male input plug is just too short (works fine without a case).
I'm going to take a look at the richardsolo case. I thought all they made was an external battery pack that plugs directly into the IP.
In defense of the iBreath, a longer male interface would have the potential to get "beat up". What is really needed in my opinion is a "hinged" male connector that stores internally and bends or pops out when needed.
Message was edited by: Macaby

Similar Messages

  • External connector for OWA

    Dear All,
    I have got a question regarding OWA accesses for internal employees, my customer has Core Cal/Device Cal licenses to cover all of their workstions. Do they need extra external connector licenses for OWA accesses?
    Thank you, Ahmet

    Hello,
    Yes. there is no exteral connector licences.
    http://office.microsoft.com/en-us/exchange/microsoft-exchange-server-licensing-licensing-overview-FX103746915.aspx
    Cara Chen
    TechNet Community Support

  • Windows External Connector (R39-01119)

    Hi,
    I purchase external connector license for my web server. Now I want to know that how to install the same.
    If no need to install then kindly provide Microsoft support document that will support the statement.
    Is it some thing like that I have to just keep the license with me with out installation.

    Hi sandip Gaonkar,
    If you are using 2003 or 2008 terminal server you can refer the following KB, if you are talking about the IIS question please ask in IIS forum.
    How to install and to configure the external connector for a terminal server or remote desktop server in Windows Server 2003, Windows Server 2008 or Windows Server 2008 R2
    http://support.microsoft.com/kb/887432/en-us
    IIS support forum
    http://forums.iis.net/
    Thanks for your understanding and support
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Need external antenna connector for old Nokia 5110...

    Hi all, this is a long shot I admit, but doesn anyone know what type of connector (and where to purchase) was used on the old 5110/6110 Nokia phones, it is the external connector located on the rear behind the rubber grommit use for the car kits... I need some of those connectors.
    Can anyone help?
    Thanks in advance.

    Hi omega1
    I should be able to help you.
    If you want to connect your 6110/6150/7110 to an external connector, we have a adaptor lead to do just this.
    Plugs into rear antenna socket with short lead to fme plug - then you can connect your antenna cable to this.
    Let me know how many you need.
    Moderator note: E-mail address and Contact number removed.
    Message Edited by wildreamer on 31-Oct-2009 04:24 AM

  • I've got a MacBook pro 15' running 10.6.6. I want to use an external monitor for my graphic design work running Adobe software and thought I'd try an HD TV. I ran a Mini Display to HDMI lead to the TV but the picture quality was disappointing.

    I've got a MacBook Pro 15' running 10.6.6. I want to use an external monitor for my graphic design work using Adobe software and thought I'd try an HD TV. I ran a Mini Display to HDMI lead to the TV but the picture quality was disappointing. I also tried a Mini Display to VGA lead and that wasn't much better. I tried all variations of resolutions in System prefs - Displays but nothing helped. Am I getting something wrong? Thanks all.

    In addition to pixel density, you are up against the translation driver card in the TV.
    If you read the fine print of computer-resolution-capability in the TV user guide, you will see a chart as tall as the manual page.  At the top is the smallest resolution capable, at the bottom is the full use of the 1080p in the TV.
    Mac falls into the top 25% of the page, maxing out at 1366x768 often.  This is because the TV control card is expected to do too much of the work, but is not designed for computer-monitor processing.
    I looked at the resolution charts on 2 TVs before deciding to buy a 1080p LCD monitor that has a TV interface/connector.  Computer monitor first, TV second.  But the thing is only 27 in.  Good thing TV is not as important to me as it is to others.

  • Imac as external monitor for windows Notebook

    Hi,
    I want to switch from my Windows Pc to a mac for private use.
    I prefer the new iMac (2011) 21,5" but I could not get an definite answer (not even in my local apple store) if it is possible to connect an existing Notebook (with VGA Mini-d-sub or DVI connector) to the new iMac in order to use the iMac as an external monitor for the Notebook.
    I definitely need this for my business work in my home-office so this information is vital.
    If ist is not possible I have to take the macMini and stay with my standard monitor.
    Can please someone tell me if it is possible at all and if so, how it can be done.
    I searched the internet and only found out that it was possible with the older 27" model but no information for the 2011 21,5" so please help!
    Thank you in advance for your Support.
    Celindir

    Hi,
    Sorry to say, but ...
    The 2011 iMacs (21.5" and 27") can only be used as a second display via a Thunderbolt-to-Thunderbolt cable.
    The 2009 and 2010 27" iMacs can be used as a second display via a DisplayPort connection.
    http://support.apple.com/kb/TS3775 andhttp://docs.info.apple.com/article.html?path=Thunderbolt/10.6/en/30822.html
    Stefan

  • Can i use my 21.5" imac as an external monitor for my macbook pro?

    I have a 21.5" iMac (with Intel processor) that I'm trying to use an external monitor for a new Macbook Pro.  Both machines have a thunderbolt input.  I bought a Belkin mini displayport to mini displayport connector, but my macbook is not displaying on the iMac.  I saw videos online showing this done with the 27" iMac, saying you just needed to press Command+F2, but that is not working for me.  I can't seem to find any posts confiming if I can use my 21.5" iMac this way though.

    https://discussions.apple.com/thread/4082303?start=0&tstart=0

  • Whats the maximum resolution resolution supported @ 60 Hz on an external display for mid 2014 macbook pro retina 13 inch ?

    whats the maximum resolution supported @ 60 Hz on an external display for mid 2014 macbook pro retina 13 inch ?

    I don't know where you found 1920x1080, but that isn't the max. The INTERNAL display can even support more than that.
    The maximum resolution is really hardware based, and since Thunderbolt 2 has a Mini displayport connector (Mini Displayport 1.2), the max resolution for Mini Displayport is 4k (3840x2160).
    PLEASE NOTE: Not all adapters can support that resolution, most monitors that can run 4k @60Hz have Displayport 1.2 (The most recent revision), Mini Displayport 1.2, and HDMI 2.0. DVI dual link can run 4k, but only 24-30Hz, depending on the monitor.
    Hope this helps!!

  • Is it possible to assign an extended desktop to be an external desktop for a window's machine?

    I have an iMac with Lion and a Windows Vists Laptop and corresponding external monitor on my desk. I'd ideally like to use my iMac as an external monitor for the Window's machine and essentially remove the physical one from my desk.  Make sense?
    I already have 4 extended desktops created on my iMac and I'm HOPING that I could assign Desktop 4 (example) as the external monitor to be controlled by the Vista machine. I'd like to be able to flip between my Mac OS and the "extrernal monitor'' via the 2-finger-swipe gesture. Anyone have any ideas?
    NOTE: I also have Paralles installed with Windows 7 running on my iMac, but I specifically need the Vista machine to have the external monitor, so please do not suggest this solution.

    Thank you!  While reading these directions, I realized that I have the wrong connector.  I have the old Mac Monitor serial port to VGA instead of the MiniDisplay port to VGA needed (didn't even think about this computer not having that port available).  I just bought the correct one from Apple, so I'll attempt these instructions as soon as it arrives.
    To confirm: I'll be able to run the iMac as the external display and have Lion open simultaneously, right? (Obviously not both on the screen simultaneously, but the ability to "switch" views) Based on the article, the trick is turning the Target Display on/off with the Command + F2 buttons (as opposed to assigning an extended desktop and using gestures), correct?
    Again, thank you for your help!

  • External LDAP for authentication

    Hi All,
    I want to use external ldap for authentication purpose with Access Manager.
    I tried adding this external ldap as a secondary ldap but couldn�t succeed.
    If I add this ldap in the primary ldap along with the AM�s own ldap, this also fails to authenticate users from the external ldap.
    How can I achieve this?
    I read many topics in this forum regarding this but none of them explain how it can be achieved.
    Please suggest.
    Thanks in advance.

    This is what the amconsole log says:
    ERROR: ConsoleServletBase.onUncaughtException
    java.lang.NullPointerException
         at com.sun.identity.idm.plugins.ldapv3.LDAPv3Repo.constructFilter(LDAPv3Repo.java:3126)
         at com.sun.identity.idm.plugins.ldapv3.LDAPv3Repo.search(LDAPv3Repo.java:1996)
         at com.iplanet.am.sdk.AMDirectoryManager.search(AMDirectoryManager.java:1938)
         at com.sun.identity.idm.AMIdentityRepository.searchIdentities(AMIdentityRepository.java:221)
         at com.sun.identity.console.idm.model.EntitiesModelImpl.getEntityNames(EntitiesModelImpl.java:139)
         at com.sun.identity.console.idm.EntitiesViewBean.getEntityNames(EntitiesViewBean.java:222)
         at com.sun.identity.console.idm.EntitiesViewBean.beginDisplay(EntitiesViewBean.java:177)
         at com.iplanet.jato.taglib.UseViewBeanTag.doStartTag(UseViewBeanTag.java:149)
         at jsps.console._idm._Entities_jsp._jspService(_Entities_jsp.java:86)
         at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:107)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
         at com.iplanet.ias.web.jsp.JspServlet$JspServletWrapper.service(JspServlet.java:687)
         at com.iplanet.ias.web.jsp.JspServlet.serviceJspFile(JspServlet.java:459)
         at com.iplanet.ias.web.jsp.JspServlet.service(JspServlet.java:375)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
         at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:772)
         at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:471)
         at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:382)
         at com.iplanet.jato.view.ViewBeanBase.forward(ViewBeanBase.java:340)
         at com.iplanet.jato.view.ViewBeanBase.forwardTo(ViewBeanBase.java:261)
         at com.sun.identity.console.base.AMViewBeanBase.forwardTo(AMViewBeanBase.java:133)
         at com.sun.identity.console.base.AMPrimaryMastHeadViewBean.forwardTo(AMPrimaryMastHeadViewBean.java:149)
         at com.sun.identity.console.idm.HomeViewBean.forwardTo(HomeViewBean.java:109)
         at com.sun.identity.console.realm.RealmPropertiesBase.nodeClicked(RealmPropertiesBase.java:90)
         at com.sun.web.ui.view.tabs.CCTabs.handleTabHrefRequest(CCTabs.java:129)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.iplanet.jato.view.command.DefaultRequestHandlingCommand.execute(DefaultRequestHandlingCommand.java:183)
         at com.iplanet.jato.view.RequestHandlingViewBase.handleRequest(RequestHandlingViewBase.java:308)
         at com.iplanet.jato.view.ViewBeanBase.dispatchInvocation(ViewBeanBase.java:802)
         at com.iplanet.jato.view.ViewBeanBase.invokeRequestHandlerInternal(ViewBeanBase.java:740)
         at com.iplanet.jato.view.ViewBeanBase.invokeRequestHandlerInternal(ViewBeanBase.java:760)
         at com.iplanet.jato.view.ViewBeanBase.invokeRequestHandler(ViewBeanBase.java:571)
         at com.iplanet.jato.ApplicationServletBase.dispatchRequest(ApplicationServletBase.java:957)
         at com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:615)
         at com.iplanet.jato.ApplicationServletBase.doGet(ApplicationServletBase.java:459)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:787)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
         at com.sun.mobile.filter.AMLController.doFilter(AMLController.java:163)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:213)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:280)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:209)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
         at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:161)
         at com.iplanet.ias.web.WebContainer.service(WebContainer.java:580)

  • Would Anker pro work as external battery for Macbook retina ?

    Would Anker Pro 20000 mah work as an external battery for Macbook retina ? I saw a few other options like hyper juice and energizer but I'm looking for something under $100 and preferably portable.

    Read:
    http://www.ianker.com/product/79AN20L-SA
    Popular Compatible Models:
    We offer 10 laptop connectors for you to choose from. The Astro Pro2 can only supply power to laptops with power lower than 60W. Please check the shape, size, voltage and power of your original adapter to ensure compatibility before purchasing.
    10 laptop connectors:
    A - 6.00*4.25 - Sony VAIO
    B - 6.25*3.00 - Toshiba Satellite A105, M35
    C - 5.50*2.10 - Toshiba T1900, T1950, T4700 / AcerNote 330T , Acer Aspire 1200
    D - 4.75*1.70 - HP DV / ASUS Eee 900, 1000
    E - 5.50*1.70 - Acer 3000, 5610
    F - 5.50*2.50 - ASUS / ACER Aspire 1600, 5610
    G - 4.00*1.70 - HP Mini 1000/ 1100 PC Series
    H - 5.00*3.25 - Samsung NC10, N130, N310
    J - 7.40*5.00 - HP Pavilion DV7, DV6 / HP G60, G61/ HP Compaq CQ60, CQ61 / HP Elitebook 6930P / HP 550, 530 / Dell inspiron 1525, 6000, E1505/ Latitude D630, D830
    K - 7.90*5.40 - ThinkPad T60, X60, R60
    Also ask.

  • Trouble with database connector for FAST for Sharepoint

    I have plenty of experience with the JDBC connector for FAST ESP using Oracle, but this is the first experience I have with the same connector for FAST for Sharepoint (F4SP).  I've created the XML config exactly to specs based on the technet guides
    and configured my user accounts on the SQL Server appropriately.  I'm using SQL Server 2008 R2.
    If I try to use a Windows account, no level of access granted on the SQL Server results in a successful login.  Any attempt to use the connector is met with "Login failed for user:  domain\username".  If I try a SQL Server account, I no longer
    see a login failure, but this instead:
    PS C:\FASTSearch\bin> jdbcconnector start -f ..\etc\DTtest.xml
    Copyright (c) Microsoft Corporation.  All rights reserved.
    14:44:59,870 INFO  [JDBCConnector] Starting the connector!
    14:44:59,870 INFO  [JDBCConnector] Validating config.......
    14:45:00,136 INFO  [JDBCConnector] Testing connections to external systems
    14:45:00,198 INFO  [JDBCConnector] Checking if connections to source and target work....
    14:45:00,620 INFO  [JDBCAdapter] Opened JDBC Connection
    14:45:00,620 INFO  [JDBCConnector] Connection made to source system
    14:45:00,620 INFO  [CCTKDocumentFeeder] Publisher :Initializing: com.fastsearch.esp.cctk.publishers.CCTKDocumentFeeder
    14:45:00,620 ERROR [JDBCConnector] Failed creating publisher. Test connection failed.
    14:45:00,620 ERROR [JDBCConnector] Caused by: Unable to create status tracker.
    14:45:00,620 ERROR [JDBCConnector] Caused by: Could not connect to database. Make sure TCP/IP is enabled for SQLServer.
    14:45:00,620 ERROR [JDBCConnector] Caused by: No suitable driver found for ;integratedSecurity=true
    14:45:00,620 INFO  [JDBCConnector] Connection made to target system
    TCP/IP is certainly enabled for SQL Server -- I am connecting to it with Sharepoint 2010, not to mention a test install of Toad Freeware for SQL Server from another machine, resulting in no errors.  My connection string, username and password are all
    set up according to the technet guide, including the encrypted password set by the encryption utility run the in F4SP Powershell.  The same user who runs the connector also ran the encryption tool, so that should not be a problem either.
    I've never had this kind of trouble connecting to Oracle databases with the JDBC connector for FAST ESP.  Any suggestions?  These failures aren't exactly helpful to me.  Thanks in advance.

    I found the solution to this problem in case anyone else was still curious.
    This was caused not by JDBC settings, permissions/access on SQL Server, etc.  It was caused simply by a missing SQL Server in F4SP configuration.  When you run the F4SP config wizard, either as single-node or multi-node installations, the wizard
    might end up ignoring the value you select for SQL Server, even if you are using a deployment XML file.  When configuring as a multi-node setup, the wizard ignored both my deployment XML tag <connector-databaseconnectionstring> and the SQL Server
    setting done manually in the wizard itself.  Examing the evidence, I suspect this was caused by corrupt installation media (since the installer also failed to create some core files in /etc upon doing a reinstall).
    The bottom line is that you must see a value for SQL Server in your install_info.txt file in order for the JDBC connector to work with SQL Server, like this:
    Other services
    Log Server:             myserver.mydomain.com:13415
    SQL Server database:    jdbc:sqlserver://myserver.mydomain.com;DatabaseName=FASTSearchAdminDatabase;integratedSecurity=true
    If you see this instead, the connector will never work:
    So, the JDBC connector is certainly dependent on the main configuration of F4SP, regardless of what SQL Server is targeted in your connector's XML configuration.
    Other services
    Log Server:             myserver.mydomain.com:13415
    SQL Server database:   
    ;integratedSecurity=true
    I had no idea there was a connection between my install_info setup and the use of the JDBC connector.  But, the connection makes sense considering this was the error message from the JDBC connector:
    09:20:04,016 ERROR [JDBCConnector] Caused by: No suitable driver found for ;integratedSecurity=true

  • 2008 R2 RDS External Connector - No licenses available

    Hi,
    I have external connector licenses for the 4 session hosts in my farm.
    I have activated a license server for the hosts to use.
    The instructions in http://support.microsoft.com/kb/887432/en-us just say to set it up but don't add any licenses.
    If I do this then all my hosts report that no licences are available.
    There is no key for the external connector so I'm unsure as to what to do next!
    Any ideas?
    Thanks 

    Hi,
    On your 2008 R2 RDSH server(s), in RD Session Host Configuration (tsconfig.msc), please make sure you have set the Licensing mode to Per User and Specified the name of your RD Licensing server.
    On your RD Licensing server, please use RD Licensing Manager (licmgr.exe) to Activate your server.  You do not need to install any RDS CALs since you are using the External Connector license.  Please keep all documentation regarding your external
    connector license purchase in a safe place.
    After completing the above, please test by logging on to your RDSH server with a few different user accounts.  Next in RD Licensing Manager create a Per User RDS CAL usage report, then right-click on the report and save it as a .csv file.  Finally
    open this file in Notepad and verify that it has the user accounts listed.
    Additionally, please check for 4105 warning entries from Source TerminalServices-Licensing on your RD Licensing server.
    Thanks.
    -TP

  • Filter recipients who are not in the Directory and smtp connectors for anothers mail systems organisations

    Hello,
    The cusomer have exchange 2003/2010 in the same organisation for the forest @domain1.fr (main organisation exchange). all users in the same forest use smtp address @domain1.fr
    This Exchange organisation is used as a rely for others branch. I mean that, they have multiples smtp connectors for another internal messaging organisation (postfix, exchange, exim....).
    When a external mail sent to @toto.fr (internal or accepted smtp domain), it sent to the main organisation exchange (@domain1.fr) to be relayed for @toto.fr smtp server.
    we want to filter the recipients in the main organisation exchange(only for @domain1.fr) by enable "Filter recipients who are not in the Directory" in global setting. we wonder if there is an impact for relying the mails to others accepted domain
    because the recipients doesn't exist in the forest @domain1.fr.
    is there a workaround ?
    Regards

    Hi,
    "Filter recipients who are not in the Directory".
    Do you mean the "Block messages sent to recipients that do not exist in the directory"?
    This will impact the whole Organisation.
    More details to see:
    http://technet.microsoft.com/en-us/library/aa995993(v=exchg.141).aspx
    Please correct me if there is any misunderstanding.
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • Error: CRM 7.0 WebClient "No Connector for Template"

    Hi Guys
    Please help my..!!
    When I register with the role CRM:  MKT_MAN, MKT_EMPL, SALES_EMPL, etc.
    I get the following error message:
    One or more entries in the central search menu have been omitted
    Entry for Accounts(BP_ACCOUNT/H): No Connector for Template CRM_ACCOUNT
    Entry for Activities(BT126_APPT/H): No Connector for Template CRM_BUS2000126
    Entry for Campaigns(CPG_CAMPAIGN/H): No Connector for Template CRM_CAMPAIGN
    Entry for External Lists(ELM_EXTERNALLIST/H): No Connector for Template CRM_ELMLIST
    Entry for Leads(BT108_LEA/H): No Connector for Template CRM_BUS2000108
    Entry for Mail Forms(PML_MAILFORM/H): No Connector for Template CRM_MAILFORM
    Entry for Marketing Plans(MPL_MKTPLAN/H): No Connector for Template CRM_MARKETINGPLAN
    Entry for Products(PRD_MATSRV/H): No Connector for Template CRM_PRODUCT
    Entry for Rebate Agreements(BT215_RAGR/H): No Connector for Template CRM_BUS2000215
    Entry for Segmentation Elements(SEG_SEGMENT/H): No Connector for Template CRM_SEGMENT
    Entry for Surveys(SURVEY/H): No Connector for Template CRM_SURVEY
    0 entities were recovered after the BOL reset
    BOL reset completed successfully
    Best regard!
    wsmartin

    As I understood your requirement, you application wants to show some product bundles which are readily available for the user to choose. when user clicks on some button or link, these products should be added to basket or order template. or else, if user chooses order template, these product bundles should automatically added to the basket. is that?
    thanks,
    Kiran V

Maybe you are looking for