External Debugging in CRMD_ORDER_BP
Hi Expert,
I've set external breakpoint in
class cl_crm_cckpt_view
method get_report
but it does not hit in crmd_order_bp.
I tried to set external breakpoint in
class CL_CRM_CCKPT_CSCFS
method REFRESH
the breakpoint can be hit, which means the external debugging is successfully activated.
I analyzed on another system, which can have the breakpoint hit, the calling stack is
CL_CRM_CCKPT_VIEW=============CP
METHOD GET_REPORT
CL_CRM_CCKPT_CFS_SERVICE_HTTP=CP
METHOD IF_HTTP_EXTENSION~HANDLE_REQUEST
CL_HTTP_SERVER================CP
METHOD EXECUTE_REQUEST_FROM_MEMORY <<<< system debugging
SAPLHTTP_RUNTIME
FUNCTION HTTP_DISPATCH_REQUEST <<<< system debugging
SAPMHTTP
MODULE (PBO) %_HTTP_START <<<< system debugging
then I tried on
CL_CRM_CCKPT_CFS_SERVICE_HTTP=CP
METHOD IF_HTTP_EXTENSION~HANDLE_REQUEST
breakpoint not hit
And tried to put breakpoint in the previous system debugging coding, all not hit.
It seems that those codings are not executed, but the factsheet data can be displayed.
Any idea about the possible reason?
thanks a lot
Ruth
Further to this, there is a transaction code that calls this function module: SRDEBUG (see OSS Note 1004248). It's a little quirky but it does work.
1) Set your external breakpoint.
2) run transaction SRDEBUG. This will display a pop-up asking if you want to stop debugging. This pop-up must remain active until you want to stop debugging, so just leave it hanging there while you debug.
Similar Messages
-
ABAP server proxy-External Debugging
I have a server ABAP proxy implementation in a R/3 where i m sending message from XI,
I want to debug the the ABAP Proxy using External debugging (http breakpoint),
Pls tell me if it is mandatory to:
1. login in R/3 (for debugging) using the same user, which is used by XI proxy adapter,
2. the user should be a dialogue user.
Is it OK to use this debugging in a production environment ?Hi,
1. login in R/3 (for debugging) using the same user, which is used by XI proxy adapter,
A. Its not like that you will have login details like user name and password for R/3 and also for XI
2. the user should be a dialogue user.
A. No i dont think so.
Is it OK to use this debugging in a production environment ?
A.Never do this. If something goes wrong in production system entire business will stop.But i dont thing you have production system details like username and password.
Please reward points if it helps
Thanks
Vikranth -
External Debugging not working
Hi,
in my solution manager system i have activated the external debugging, still im not able to debug from webdynpro. i checked the below setttings .
in abap editor -> utilities -> settings -> debugging -> activate ( Checked )
in SICF -> edit -> debugging -> activate debugging .
but still im not able to debug from webdynpro . what could be the problem ?/?
thanksHi,
Also make sure that the Application server on which your Wedbynpro application is running and the Application server which your R/3 session is using are the same.
You can shift between the application server for R/3 in the SAP Logon.
Regards,
Sesh -
Hi all,
When I call a RFC from portal It seems to work fine, but when I put an external debug It doesn't call the RFC and create an exception.
In R3 I can see this dump RFC_DEBUGGING_NO_DIALOG_USER. But the user is a dialog user.
Plz any help?.
At PRD it doesn´t have the external break but doesn´t call the RFC.
The call of this RFC was working fine, please can you tell me what configuration should I check?
ThanksHI,
When you are trying put external Debugger then you have change login credential in the respective JCos (Model and Meta data)
please make sure that your have loging with same user Ids in R/3 system and Portal and JCO connection login details also should same. then only your external debugger start working .
Thanks
Suresh -
External debugging of ABAP from NWDS in web dynpro java
Hello Experts,
Like a while a ago, I remember on SDN there was a video for external debugging tutorial. Can any one point me to that or any other documentation for doing external debug from NWDS.
Thanks,
SharathHI James!!!
You can find a video presentation for external debugging of WD JAVA application at:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/com.sap.km.cm.docs/library/elearning/user-interface-technology/web%20dynpro/wd%20java/web%20dynpro%20java%20with%20an%20adaptive%20rfc%20model/web%20dynpro%20java%20with%20an%20adaptive%20rfc%20model%3a%20debugging/resources/eventplayer.htm
I hope this would help you. If you seek something else, you can revert back. I'll be happy to help you
Cheers!!!
Umang -
** External Debugging is not working in Proxy inbound scenario
Hi Friends,
In our File to Proxy scenario, the user which is mentioned in reciver XI adapter of type as 'C Communication Data'.
The message is processed successfully (SXI_MONITOR). But the records in the Z table are not updated.To debug this, I am not able to set external debugging (Utilities --> Settings --> Debugging) for this user. (the user which is mentioned in the CC). i.e it gives the message 'Logon with a dialog user'.
So, How do I bug my inbound proxy, when the message is processed ?
We use ECC 6.0 as application server.
Kind regards,
Jegathees P.Jegathees,
If you want to debug inbound proxy you need to set hard-coded break point "break-point" in your abap code.
Then stop the queue manually and re-run your interface. You will find your message in an inbound queue. Goto sxmb_moni and process this message. This time it will stop to a point where you have set the hard coded breakpoint.
Hope this will help.
Thanks,
Nilesh -
External debugging authorization
Hello All,
Can you please name the role which needs to be assigned to a user so that he will have the external debugging authorizations?.
Thanks and Regards
Shanto AloorFor debugging the user must have debug authorizations. Please ensure this via setting
appropriate roles or profiles via transaction SU01. Normally the profile "S_ENTW_SHOW"
should be adequate (for detailed information see note[ 668252|http://service.sap.com/sap/support/notes/668252]
Edited by: Mark Foley on Jun 14, 2011 3:37 PM -
Issue in external debugging in comm_bupar application
Hi All,
I am currently working in SAPCRM 5.0 and on enabling a pop-up to be displayed when one of the partner belonging to a particular relationship category in the partner relationship tab in the PCUI is modified.
I am facing the below issue:
1) When I login using my SAP login credentials into SAPGUI and the comm_bupar pcui application url in my laptop and with the external debugging activated, it does not take me into the debug mode.
2) When I login using my SAP login credentials into SAPGUI and the comm_bupar pcui application url in my colleagues' laptop and with the external debugging activated, it does take me into the debug mode.
3) When I login using my colleagues SAP login credentials into SAPGUI and the comm_bupar pcui application url in my laptop and with the external debugging activated, it does not take me into the debug mode.
4) When I login using my colleagues SAP login credentials into SAPGUI and the comm_bupar pcui application url in his laptop and with the external debugging activated, it does take me into the debug mode.
I had got in touch with the sap basis and sap security teams in our project and they could not help me with this issue. They have given me all the requisite access.
Well, if anyone of you had come across this kind of an issue earlier, please let me know as to what needs to be done to rectifiy this issue.
Are there any settings that need to be done to work with the external debugging? I have also tried searching for this on the forums but was not able to find the solution.
It looks like an issue with the settings or components in my laptop as of now.
Thanks,
Ravi Kiran
Edited by: Ravi Kiran Madabhushi on Apr 7, 2008 12:51 AMDear GLM/Bala,
I am trying to debug BAPI in R3 externally ie through my portal as we normally do to check if the backend rfc is executing well for portal application .
For your information i am able to do normal debugging at the backend but unable to do external debugging , might be issue at the portal side or J2EE server.
Please reply back if you require any other clarification. -
External Debugging parameter Settings
For this below settings external debugging parameterwill be activated , can anyone please check
Param. Name
abap/ext_debugging_possible
Short description(Engl) To restrict the usage of extern/HTTP debugging
Appl. area ABAP
ParameterTyp Integer value
Changes allowed Change permitted
Valid for oper. system All operating systems
Minimum 0
Maximum 2
DynamicallySwitchable
Same on all servers
Dflt value 0
ProfileVal 0
Current value 0Kappy,
Thx for the fast reply!
Your advice worked on one of my external drives but not the other. It worked on the drive I took out from my MBP when I installed an SSD. Installed it in a $20 USB encloser from OWC. The drive it didn't work on is a Western Digital MyBook firewire external drive. Strange.
thx again!
lenn -
Hi,
We are in SRM 4.0,
I am trying do external debugging while creating a shopping cart(BBPSC01),
The breakpoint is getting stopped but in the same web portal only, not in a new gui screen.
When I press F5 the portal screen is getting refresh and F6,F8 doesnt work.
Only I can check the value where the breakpoint stopped.
Checked:-
1.Utilities -> Settings -> ABAP Editor -> Debugging -> External Debugging and made the check box as active.
2.The parameter ~GENERATEDYNPRO = 1 in sicf service
Please let me know how can external debugging opens in a new session.
Regards,
NeelimaHi,
Thanks for ur respone,
Hi kedar
I tried keeping ABAP DEBUGGER as "New debugger", still it is opening in the same portal page. And it is giving error
" No additional external mode for new ABAP debugger available".
Hi Ricardo Cavedini ,
I checked that note it cannot be implemented in our system(checked in SNOTE)
Regards,
Neelima -
Abap Rfc External Debug from a Jco Client Connection
Hi to all,
i have developed a Java Application on Sap J2ee (SAP-JEE 7.01 SP6) , using the Jco2 integrated.
I'm using direct connection , calling Custom Functions Module on Abap Stack.
I have a question about Abap Debugging:
now i debug the abap function setting an external session breakpoint (SE37) and the abap debug stops correctly on breakpoint that i've set.
But sometimes i notice the strange situation that during my debug another debug session (identical to the first) is open on my sap gui (it seems that Jco sends another request while i'm debugging the first )
Reading the jco documentation i've seen this method that i never used: JCO.Client setAbapDebug(boolean debug)
Enables/disables abap debug.
Note:If the connection is already established the method will close and reopen the connection.
have I to set this in my java code in addition to abap external breakpoint? Why Jco.Client sends another request?
Thanks for the answers
AlessandroAnyone know?
Thanks,
Augusto Póvoa. -
External debugging - SAP SRM 7.0
Hello.
I'm working with SAP SRM 7.0.
I need to debug a FM that is getting a dump and I need debug to find the error.
To do this, I'm trying debugging it, creating an external break in SRM FM (SE38).
Then we logon in SRM webpage and try to create a purchase order.
But when click save or verifying, break doesn't initiate.
thanks.
GlaucoHello.
Solved. I was testing with same user in both systems (SRM 7.0 and SRM Portal).
But, it only worked when I entered first in SRM Portal and after in SRM 7.0 and created external breaks.
att.
Glauco -
Problem in External Debugging for the Web service if SAML is Configured
Hi All,
I am facing a problem . I will tell you the exact process :
1. I have provided a external breakpoint in the ERP system.
2 . SAML is configured on both Consumer as well as Provider side.
3. try to execute the process Remotely, I am not getting breakpoint in the ERP system
If I remove the SAML and Provide basic Authentication, i am able to get. it seems there is some configuration parameter which are missing in the SAML Configuration.
Please advice how to check for the same.
Regards,
Kapil.Hi Kapil,
I think the request is falling over with SAML authentication issues between the consumer & provider & that's why it's not triggering the breakpoint. I would first try tracing the request when it reaches the SOAP runtime of the provider using SAP Note 1254821. See the section towards the bottom under 'Error Analysis'.
Regards, Trevor -
HOW TO DEBUG EXTERNAL ABAP PROGRAM
HI ALL ,
I am new to Webdynpro Java. I am unabe to debug the ABAP program through web dynpro java application .
I want to debug the external abap program through web dynpro java application.
If it possible please let me know the required procedure for debugging.
Thanks in advance...!Hi,
I donu2019t have any documents for that. But I vl give some points plz go through that.
1. Login into the ECC System with respective of User name and Password.
2. Enter T -Code (SE 37). Here Pass to the you are Functional Module Name (BAPI/RFC).
(By using that same BAPI/RFC u have to develop the that WDJAVA Application)
3. Pass the RFC and Click on Display Button. That RFC will be open.
4. Here u have find it Red Icons available (External/Internal Debug) Click on that External Debug.
5. Finally deploy your WDJAVA Application that time automatically youu2019re ECC System Opened.
Please check it these
F5 - Step by Step debugging
F6 - Skips loops and Subroutines
F7 - Skips the loop or subroutine and returns to the last cursor point.
F8 - Execute and come out of debugging
Hope this helps!!
Best Regards
Vijay K -
HI to all!
I have a problem with RFC Debugging with External Debugging.
I have set a Breakpoint at the call of an RFC FB when I Debug form SAP GUI (internal)
I can go into this RFC FB with F5
When I cam from Web Dynpro (external) I can go not into this RFC FB with F5.
If i push button F5 the next code line is after the RFC FB call and not into this RFC FB.
My question is what I have to do to get into this RFC FB by external Debugging
Thanks'
Hermannhi
good
go through this link,hope this ll give you the idea to solve your problem
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0e9a9d90-0201-0010-478e-991dbea73a30
thanks
mrutyun^
Maybe you are looking for
-
I have to create a new iTunes account as I cannot remember the security question answers to my current account, how do I move over my purchases from my current account to my new account?
-
Love the Thunderbolt Display but disappointed with connection to rMBP
I just got a Thunderbolt Display (my first). Gorgeous piece of equipment and typically elegant Apple industrial design. I'm a little disappointed, though, in how it is connecting to my retina MacBook Pro (yes, I'm completely broke now...). It seems
-
Please Help me fix the css for font colors in this menu!
I have finally figured out how to make my drop down menu work, but I need some help troubleshooting this code. I have fiddled with the code for several hours and have still been unable to fix it. My issue is that I have been unable to distinguish bet
-
Filevault won't recover disk space
I have filevault on on my macbook pro. When I shutdown, it usually recovers the disk space that is replaced from the files I deleted (when I emptied the trash), as it should. However, this is the second time that I've had this problem where, when I s
-
My first problem was the stuck disk from the previous thread. The instructions worked and the disk came out on start up. Now the disk will not burn. The door opens on the yellow light , it pulsates for a while then the door closes. Then Nothing. I bu