External display - maximum resolution only works in safe mode on MBP

I'm having an issue with an external display connected to a 2012 non-retina MacbookPro 15" i7 running 10.9.  Monitor is Dell U2713HM, which has a maximum resolution of 2560x1440, and is connected via a Mini-Dipslayport to Displayport cord.
My setup has been working great for over a year, where while at my office I use the macbook closed in "clamshell mode" with the Dell monitor being the only display in use, running at 2560x1440.  However today when I came into my office and connected to the dispay as usual, the resolution on the Dell was noticably scaled.  System preferences is showing it running Scaled at 1080p, and when I select Best for Display it stretches to a very wide and distorted resolution.  I can hold alt and click the Scaled button to display additional resolutions, however the maximum resolution listed is 1600x1200.  Same problem regardless of clamshell, mirror, or extended desktop modes.
I've been trying to track down the problem, and have run though the usual procedures: restart, shutdown, reset PRAM, reset SMC, check cord connections, verify disk, repair disk permissions - all to no avail.  However when I boot in safe mode the display runs as it should at 2560x1440 without issue, which lets me know its not a problem with the cord or connectioin, but rather something on the OS / GPU side.
I can't for the life of me figure out what is causing the issue.  Considering its been working fine for quite some time, and I've made no unusual changes to the MBP in the past 48 hours when the display was working properly, I'm not really sure where to go from here.   Hoping to not have to migrate to a new user or repartion my HDD.
Any suggestions on possible solutions?
Thanks.

I stumbled upon a fix.  Still not sure what caused the issue in the first place, but for anyone having the same issue, the display override script contained on the site below seems to have fixed the issue.
http://embdev.net/topic/284710

Similar Messages

  • Monitor only works in safe mode

    My monitor only works in safe mode.  when restart in normal mode the monitor screen is blank.  when I start in safe mode the monitor works fine.

    Is there a reason you have not entered the menu as I have suggested and reset the monitor to factory default?
    Your old school monitor needs a kick in the pants to remind it that it is plug n' play. That is essentially what the reset will do. It won't hurt anything.
    Was the TV you had connected to the PC before using the monitor an HDTV one with 1080p resolution?
    In order to reinstall the graphics driver you will need to be logged in as a user with elevated (admin) priveleges. A standard user cannot install drivers or programs. You do not heed to reinstall RAID drivers.
    You might need to consider replacing the monitor with a modern LCD display. They are quite inexpensive these days and can evven be found in the second hand market. 
    If you don't want to do that then you can remove the video card and then connect the monitor VGA cable to the video output port on the rear of the desktop PC. Removing the card will enable the onboard video.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Itunes wont work.Says there has been a problem with the program and then shutsdown. only works using safe mode

    Recently itunes stopped working. It will only work using safe mode. i have check the plug ins folder but i have no plug ins.

    Hello MaFiosoXIII
    For issues with iTunes crashing and only working in Safe Mode, then check out the article below to continue your troubleshooting to get it working again. 
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/TS1717
    Regards,
    -Norm G.

  • Upgraded to osx10.8 and only works in safe mode

    I just upgraded to osx10.8 and only works in safe mode!  What now?

    "works in safe mode" meaning you do not get instant kernel panic when you boot up, and instant kernel panics on boot-up were happening before?  If this is the case, it may be that one (or more)  of your third-party log-in items is incompatible with 10.8.  

  • Only works in safe mode

    Help....I am only a novice mac user (so I need help in the most layman terms possible).  Seems all my Apple products are going kaput; first one being my macbook (early 2008 model).  Looks like my disk drive isnt working correctly; I put in a new hard drive.....I went to reinstall Snow Leopard then upgrade to Lion.  Ever since then my mac only seems to work in safe mode.  I used my imac to load snow leopard....(with firewire); and downloaded lion from app store.  is there a way to wipe clean and start over?  There is nothing on the computer that I need.....I keep all my important files on an external hard drive.  my big concern is I dont know how to do it and second since I dont have a disk for lion will just going back to app store allow me to re-download or will I have to pay 30 bucks again.  I have seen others have had similar issues...I just cant seem to figure this out.  If anyone can help I will be eternally grateful!
    Ray

    When your in safe mode try going to the Disk Utility and doing a Disk Repair. Repair Permissions. Then see if that lets you boot normally. If that doesn't work you might need to reinstall Snow Leopard again then upgrade to Lion. (Lion will still be available under your App Store Purchases tab and you don't have to pay again).
    I recommend you using Time Machine. Not only do you save yourself the trouble of copying things to your External Hard Drive, but if you run into something like this again restoring it from Time Machine saves you all the time you spend downloading Lion and Installing Snow Leopard. Plus everything is exactly how you last backed up. Everything!
    Best of luck.
    By the way, if you don't see the App Store when you install Snow Leopard just do a software update from the top left apple icon of your system and you should see it when its done.

  • ATI 9700 only works in Safe Mode ?

    Hi,
    I purchased a Celestica ATI 9700 MAC gfx card and it seems only to work in Safe Mode. In normal mode my G4 boots but wont reach the login screen, the screen stays blue and occasionaly it may show the mouse(responds).
    I can only think that the card is broke and isnt being stressed by Safe Mode or has some kind of incompatible firmware?
    Any tips would be greatly appreciated as i'd love to get the 9700 running in my machine.
    Cheers
    John

    Hi
    I could well be wrong but I've always been under the impression the 9700 only works in MDD G4s. I believe they were only available from Apple at the time as a built to order option and the AGP slot in all MDD G4s was modified to provide additional power to the card. I'm not sure whether third party 9700 graphics cards need this though. The 9800 gets round it by having a separate internal power connector, so it can be used in any G4 with an AGP slot.

  • PowerPC g5 only work in safe mode

    I have a PowerPC g5 running os x version 10.5.8 which has been working fine but the other day was not given the option to log in just a blue screen and some fan noise. I am able to use the mac in safe mode but that is it :-(

    The iMac G5 was one that had many power supply and bad capacitor issues.  This sounds like one of them.
    Come on.  The poster says it works in safe mode, so how can it be a power supply problem?
    Seems like a video chip problem to me. The solder worked loose over time in some machines. Re-solder for the brave.
    You will have to translate this to 10.5. 
    You may have a problem with the video chip.
    Here is how to tell...
      Shutdown your machine.  Hold down the shift key.  Poweron.  Bootup will be longer.
        Wait awhile while you harddrive is being checked.
      An article on how to boot into safe mode.
        http://support.apple.com/kb/ht1455
    Runs OK in safe mode...
    Running in Safe mode leaves out some video drivers.  Which results in your machine not using advanced video hardware. As luck would have it, you can run the safe mode video drivers in normal mode.
    Here is how:
    https://discussions.apple.com/message/16057567#16057567
    Look through the above thread.  See the second page.  You don't have to read through the first page.  Just go to the part where I try a solution that works.
    Summary of G5 problems. Includes instructions on a hardware fix for the brave at heart:
    See -Rotten Apple- articles in both of these threads.
    https://discussions.apple.com/thread/4023152?tstart=0
    https://discussions.apple.com/message/18700825#18700825
    Robert

  • Missing external display 1920x1080 resolution, only shows 1680x1050... Please HELP !

    When connecting my Macbook Air (mid 2011) to an external LG 22" Display (M2241A) which supports a native resolution of 1920x1080, the closest setting available in the display preferences is 1680x1050, and aspect ratio is really distorted at this size. I use an Apple mini-display-port to HDMI, and HDMI cable to connect the Monitor.
    What can I do to correct this problem ? How do I make the 1920x1080 available and get rid of the distortion ?

    Thanks for your quick answer, but... When I use the 1080p resolution, I need to use Underscan, and the colors change, the fonts get all blurry and overall definition goes really bad. Really seems like a TV setting.
    Maybe okay to watch a movie, but not to work in Photoshop and get design work done properly.
    The external display only has HDMI + VGA inputs.
    So I guess the next step is to try finding a different connector (mini-display to VGA) But I am now in Chile, Patagonia, and believe me, this will be quite a challenge to find !!! Also, no way to buy at Apple online store and get it shipped here in Chile... :-(((

  • My external display via VGA only works when macbook air is shut?

    I'm using a MDP to VGA to connect my 2012 Macbook Air to an external display. When the Air is open I can view only the desktop (no open apps). The open apps only appear on the external monitor when I close the Air (after a couple of seconds)!! Have I accidently altered some settings somewhere??? Makes no sense to me.

    Update - I ended up spending about an hour on the phone with a very helpful rep from AppleCare.  He was also stumped by this problem.  We ended up solving it by using a remote screen-share app that allowed him to see what my video card was sending to the external display, and he directed me over the phone to change the settings (quite funny really - it was literally "move your mouse up a tiny bit, now click, now left, etc).
    So, my problem is solved for now, albeit in a very cumbersome way.  Still amazed that there's no way to fix this properly.

  • Satellite L30 Vista screen not lit; extrnal monitor only works in Safe Mode

    HI,
    I have LS30-10S.
    first the laptop screen would not light up though I could see a faint ghost of icons etc;
    I tried unplugging and holding power button down (battery is long time dead) with intermittent and random success;
    I borrowed an external LCD monitor (Lenovo Thinkvision) and that worked fine, and pressing Fn+F5 would actually sometimes bring the laptop screen to life too.
    I changed the screen inverter and that seemed to restore the laptop screen, but the next time I rebooted +neither+ screen would work unless I chose safe mode.
    Currently I can only use the external screen and only in safe mode.
    Has anyone else experienced this?

    Hi
    Just few questions:
    Has the external monitor worked properly before you disassembled the notebook and replaced the LCD inverter board?
    What happens exactly if you boot the notebook in normal mode?
    Did you try to boot the notebook using a Live CD (Win PE or Linux live CD)?
    I would also recommend you to check if you new OS installation is possible.
    The safe mode is just a test environment and the system does not access all hardware recourses using safe mode.
    So theoretically the issue could be related to faulty hardware or system problems.

  • Media Live - Component Output Only Working in Safe Mode

    Running Vista Ultimate (64-bit), plugged in to an SDTV.
    I installed the latest nforce and geforce drivers for the system (while using composite output). Then I shutdown the computer, unplugged the composite and plugged in the component. When booting up, I can see the bios post, and the Windows loading screen (black screen with green progress bar at bottom), but then it just goes blank like it's not receiving a signal from the component. If I boot in to safe mode, it works fine. So I used the composite to change the video resolution to the same one that safe mode uses (800x600), but still not luck. Also tried the Safe Mode in 640x480 option, but that doesn't work either.
    Any ideas?

    Hi,
    If the problem involves a hardware component that is only needed for "enhanced" performance (like fancy graphics) and which is called upon by a particular system kernel extension that does not load during a Safe Boot, then as a workaround you might be able to find that extension file and remove it. That might let you boot normally without crashing. You wouldn't have the "enhanced" functionality controlled by the bad component, but the hope would be that you would then be able to maintain other features which would be disabled by a Safe Boot.
    See this outside thread:
    *Use wireless networking in safe boot mode*
    http://www.macosxhints.com/article.php?story=20080629044753419
    It includes the following tip:
    Safe Boot doesn't let some extensions load, which activate specific extended functions of various chips, including some function controlled by circuitry that's damaged in your friend's Powerbook. The "troublemaking" extension may be one of the ATI extensions at System/Library/Extensions; when it loads, it encounters an unexpected hardware fault, which prevents OS X startup from proceeding. So, if you want to start up the Powerbook without turning off all the extensions that Safe Boot mode turns off, use a process of elimination to find the specific extension that's causing the trouble, and move it out of System/Library/Extensions--first drag one of them out, restart, see if the problem still exists, and if it does, restart in Safe Boot mode, drag the next ATI extension out, restart, etc. Once you've found the troublemaker, drag the other extensions you removed, back into System/Library/Extensions, then repair permissions (since moving extensions out of, then back into, this location will mess up their permissions).
    -----------------------------

  • Late 2009 imac- Mavericks, Kernel Panics- checkerboard screen- only works in Safe Mode now.

    Need help with Late 2009 imac- had HD and video card replaced under Apple Care last year. Upgraded to Mavericks and it froze up while on Yahoo looking at a slide show. Screen pixelated with checkerboard patterns and then eventually locks-up. Only way to get it to work now is in SAFE MODE.
    Tried memory test, Resetting SMC, AHT, Zapping NVRAM, PRAM, only errors I can see are some permissions
    From Repair Permissions (Disk utility):
    Repairing permissions for “Macintosh HD”Warning: SUID file “usr/libexec/security_authtrampoline” has been modified and will not be repaired.Warning: SUID file “usr/lib/sa/sadc” has been modified and will not be repaired.Permissions differ on “Applications/Safari.app/Contents/Resources/Safari.help/Contents/Resources/inde x.html”; should be lrwxr-xr-x ; they are -rwxr-xr-x .Repaired “Applications/Safari.app/Contents/Resources/Safari.help/Contents/Resources/inde x.html”Group differs on “Library/Printers/InstalledPrinters.plist”; should be 80; group is 0.Permissions differ on “Library/Printers/InstalledPrinters.plist”; should be -rw-rw-rw- ; they are -rw-r--r-- .Repaired “Library/Printers/InstalledPrinters.plist”
    From LOG see a new RAM and KERNEL PANIC-
    Note RAM was tested in separate test and passed erlier today- but see that it is listed as corrupt here:
    Anonymous UUID: 
    F4AC0FFD....
    Sun Aug 17 06:17:30 2014
    panic(cpu 2 caller 0xffffff80022c5b9a): "Possible memory corruption: pmap_pv_remove(0xffffff801975ac08,0x1062f3000,0x7ffbf, 0xff4f00007ffbf7d2, 0xffffff810d343be4, 0xfffffe9a5a842798): null pv_list!"@/SourceCache/xnu/xnu-2422.110.17/osfmk/i386/pmap_internal.h:763
    Backtrace (CPU 2), Frame : Return Address
    0xffffff810d343ab0 : 0xffffff8002222f79
    0xffffff810d343b30 : 0xffffff80022c5b9a
    0xffffff810d343c10 : 0xffffff80022c60a7
    0xffffff810d343c70 : 0xffffff800227e2fa
    0xffffff810d343d80 : 0xffffff80022825cf
    0xffffff810d343db0 : 0xffffff800223d9e3
    0xffffff810d343df0 : 0xffffff80025cec5e
    0xffffff810d343e60 : 0xffffff80025e25ed
    0xffffff810d343ef0 : 0xffffff80025e2967
    0xffffff810d343f30 : 0xffffff8002220b3b
    0xffffff810d343f60 : 0xffffff80022dc883
    0xffffff810d343f80 : 0xffffff80022f3712
    BSD process name corresponding to current thread: Problem Reporter
    Mac OS version:
    13E28
    Kernel version:
    Darwin Kernel Version 13.3.0: Tue Jun  3 21:27:35 PDT 2014; root:xnu-2422.110.17~1/RELEASE_X86_64
    Kernel UUID: BBFADD17-672B-35A2-9B7F-E4B12213E4B8
    Kernel slide:
    0x0000000002000000
    Kernel text base: 0xffffff8002200000
    System model name: iMac11,1 (Mac-F2268DAE)
    System uptime in nanoseconds: 112908028516
    last loaded kext at 37062361833: com.apple.driver.AudioAUUC    1.60 (addr 0xffffff7f844ad000, size 28672)
    loaded kexts:
    com.apple.driver.AudioAUUC    1.60
    com.apple.filesystems.autofs    3.0
    com.apple.driver.AppleHDAHardwareConfigDriver    2.6.3f4
    com.apple.driver.AppleTyMCEDriver    1.0.2d2
    com.apple.driver.AGPM    100.14.28
    com.apple.driver.AppleMikeyHIDDriver    124
    com.apple.iokit.IOBluetoothSerialManager    4.2.6f1
    com.apple.driver.AppleHDA    2.6.3f4
    com.apple.driver.AppleMikeyDriver    2.6.3f4
    com.apple.driver.AppleHWSensor    1.9.5d0
    com.apple.driver.AppleUpstreamUserClient    3.5.13
    com.apple.iokit.IOUserEthernet    1.0.0d1
    com.apple.kext.AMDFramebuffer    1.2.4
    com.apple.driver.AppleMuxControl    3.6.22
    com.apple.iokit.IOBluetoothUSBDFU    4.2.6f1
    com.apple.ATIRadeonX2000    8.2.4
    com.apple.driver.AppleBacklight    170.3.5
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport    4.2.6f1
    com.apple.Dont_Steal_Mac_OS_X    7.0.0
    com.apple.driver.AppleHWAccess    1
    com.apple.driver.AppleMCCSControl    1.2.5
    com.apple.driver.AppleLPC    1.7.0
    com.apple.driver.AppleIntelMCEReporter    104
    com.apple.kext.AMD4800Controller    1.2.4
    com.apple.driver.ACPI_SMC_PlatformPlugin    1.0.0
    com.apple.driver.AppleUSBCardReader    3.4.1
    com.apple.driver.AppleIRController    325.7
    com.apple.driver.AppleFileSystemDriver    3.0.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN    1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
    com.apple.BootCache    35
    com.apple.iokit.SCSITaskUserClient    3.6.6
    com.apple.driver.XsanFilter    404
    com.apple.iokit.IOAHCIBlockStorage    2.6.0
    com.apple.driver.AppleUSBHub    683.4.0
    com.apple.driver.AppleFWOHCI    5.0.2
    com.apple.driver.AirPort.Atheros40    700.74.5
    com.apple.iokit.AppleBCM5701Ethernet    3.8.1b2
    com.apple.driver.AppleUSBUHCI    656.4.1
    com.apple.driver.AppleUSBEHCI    660.4.0
    com.apple.driver.AppleAHCIPort    3.0.5
    com.apple.driver.AppleRTC    2.0
    com.apple.driver.AppleACPIButtons    2.0
    com.apple.driver.AppleHPET    1.8
    com.apple.driver.AppleSMBIOS    2.1
    com.apple.driver.AppleACPIEC    2.0
    com.apple.driver.AppleAPIC    1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient    217.92.1
    com.apple.nke.applicationfirewall    153
    com.apple.security.quarantine    3
    com.apple.driver.AppleIntelCPUPowerManagement    217.92.1
    com.apple.kext.triggers    1.0
    com.apple.iokit.IOSerialFamily    10.0.7
    com.apple.driver.DspFuncLib    2.6.3f4
    com.apple.vecLib.kext    1.0.0
    com.apple.iokit.IOAudioFamily    1.9.7fc2
    com.apple.kext.OSvKernDSPLib    1.14
    com.apple.iokit.IOSurface    91.1
    com.apple.driver.AppleGraphicsControl    3.6.22
    com.apple.iokit.IOBluetoothFamily    4.2.6f1
    com.apple.driver.AppleBacklightExpert    1.0.4
    com.apple.iokit.IONDRVSupport    2.4.1
    com.apple.iokit.IOBluetoothHostControllerUSBTransport    4.2.6f1
    com.apple.driver.AppleSMBusPCI    1.0.12d1
    com.apple.driver.AppleSMBusController    1.0.12d1
    com.apple.iokit.IOFireWireIP    2.2.6
    com.apple.driver.AppleHDAController    2.6.3f4
    com.apple.iokit.IOHDAFamily    2.6.3f4
    com.apple.kext.AMDSupport    1.2.4
    com.apple.AppleGraphicsDeviceControl    3.6.22
    com.apple.iokit.IOGraphicsFamily    2.4.1
    com.apple.driver.AppleSMC    3.1.8
    com.apple.driver.IOPlatformPluginLegacy    1.0.0
    com.apple.driver.IOPlatformPluginFamily    5.7.1d6
    com.apple.driver.AppleUSBHIDMouse    180.9
    com.apple.driver.AppleHIDMouse    180.9
    com.apple.driver.AppleUSBHIDKeyboard    170.15
    com.apple.driver.AppleHIDKeyboard    170.15
    com.apple.iokit.IOSCSIBlockCommandsDevice    3.6.6
    com.apple.iokit.IOUSBMassStorageClass    3.6.0
    com.apple.iokit.IOUSBHIDDriver    660.4.0
    com.apple.driver.AppleUSBMergeNub    650.4.0
    com.apple.driver.AppleUSBComposite    656.4.1
    com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.6.6
    com.apple.iokit.IOBDStorageFamily    1.7
    com.apple.iokit.IODVDStorageFamily    1.7.1
    com.apple.iokit.IOCDStorageFamily    1.7.1
    com.apple.iokit.IOAHCISerialATAPI    2.6.1
    com.apple.iokit.IOSCSIArchitectureModelFamily    3.6.6
    com.apple.iokit.IOUSBUserClient    660.4.2
    com.apple.iokit.IOFireWireFamily    4.5.5
    com.apple.iokit.IO80211Family    640.36
    com.apple.iokit.IOEthernetAVBController    1.0.3b4
    com.apple.driver.mDNSOffloadUserClient    1.0.1b5
    com.apple.iokit.IONetworkingFamily    3.2
    com.apple.iokit.IOUSBFamily    683.4.0
    com.apple.iokit.IOAHCIFamily    2.6.5
    com.apple.driver.AppleEFINVRAM    2.0
    com.apple.driver.AppleEFIRuntime    2.0
    com.apple.iokit.IOHIDFamily    2.0.0
    com.apple.iokit.IOSMBusFamily    1.1
    com.apple.security.sandbox    278.11.1
    com.apple.kext.AppleMatch    1.0.0d1
    com.apple.security.TMSafetyNet    7
    com.apple.driver.AppleKeyStore    2
    com.apple.driver.DiskImages    371.1
    com.apple.iokit.IOStorageFamily    1.9
    com.apple.iokit.IOReportFamily    23
    com.apple.driver.AppleFDEKeyStore    28.30
    com.apple.driver.AppleACPIPlatform    2.0
    com.apple.iokit.IOPCIFamily    2.9
    com.apple.iokit.IOACPIFamily    1.4
    com.apple.kec.corecrypto    1.0
    com.apple.kec.pthread    1
    Model: iMac11,1, BootROM IM111.0034.B02, 4 processors, Intel Core i7, 2.8 GHz, 8 GB, SMC 1.54f36
    Graphics: ATI Radeon HD 4850, ATI Radeon HD 4850, PCIe, 512 MB
    Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631
    Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631
    Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
    Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.74.0-P2P
    Bluetooth: Version 4.2.6f1 14216, 3 services, 15 devices, 0 incoming serial ports
    Network Service: Wi-Fi, AirPort, en1
    Serial ATA Device: ST31000528AS, 1 TB
    Serial ATA Device: OPTIARC DVD RW AD-5680H
    USB Device: Hub
    USB Device: Keyboard Hub
    USB Device: Apple Optical USB Mouse
    USB Device: Apple Keyboard
    USB Device: BRCM2046 Hub
    USB Device: Bluetooth USB Host Controller
    USB Device: Internal Memory Card Reader
    USB Device: Hub
    USB Device: Built-in iSight
    USB Device: IR Receiver
    Thunderbolt Bus:
    <Link Edited By Host>

    All RAM tested individually and Passed- Ran a Ram memory test as well.
    New kernel panic is now as follows-
    What's interesting is I had the video card replaced at Apple in the last year- it's a ATI Radeon HD 4850 512 MB
    But I see that the log has it listed as
    "com.apple.ATIRadeonX2000(8.2.4)" 
    wondering if that my be the problem as the issue is the screen is fragmented and flickers- checkerboard before it crashes when not in safe mode..
    Sun Aug 17 15:16:36 2014
    panic(cpu 4 caller 0xffffff800f6dc24e): Kernel trap at 0xffffff800fabc6cf, type 14=page fault, registers:
    CR0: 0x0000000080010033, CR2: 0xffffffffffffffff, CR3: 0x0000000018777000, CR4: 0x0000000000000660
    RAX: 0x00000000ffffffff, RBX: 0x0000000000000130, RCX: 0x0000000000001470, RDX: 0x000000000000001c
    RSP: 0xffffff811a97b830, RBP: 0xffffff811a97b860, RSI: 0xffffffffffffffff, RDI: 0xffffffffffffffff
    R8:  0x0000000020000000, R9:  0xffffff80e1804000, R10: 0x00000000000003eb, R11: 0x0000000000000000
    R12: 0x00000000ffffffff, R13: 0x0000000000010113, R14: 0xffffff80286b8700, R15: 0xffffff8025438200
    RFL: 0x0000000000010286, RIP: 0xffffff800fabc6cf, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0xffffffffffffffff, Error code: 0x0000000000000000, Fault CPU: 0x4
    Backtrace (CPU 4), Frame : Return Address
    0xffffff811a97b4c0 : 0xffffff800f622f79
    0xffffff811a97b540 : 0xffffff800f6dc24e
    0xffffff811a97b710 : 0xffffff800f6f3746
    0xffffff811a97b730 : 0xffffff800fabc6cf
    0xffffff811a97b860 : 0xffffff7f90be215c
    0xffffff811a97b890 : 0xffffff7f90b81366
    0xffffff811a97b8b0 : 0xffffff7f90b99842
    0xffffff811a97b8e0 : 0xffffff7f90b996f9
    0xffffff811a97b930 : 0xffffff7f90b995c7
    0xffffff811a97b980 : 0xffffff7f90b981b6
    0xffffff811a97b9a0 : 0xffffff7f90bc0c4d
    0xffffff811a97b9c0 : 0xffffff7f90b89614
    0xffffff811a97b9f0 : 0xffffff7f90bc3749
    0xffffff811a97ba40 : 0xffffff7f90b88a4d
    0xffffff811a97bb20 : 0xffffff7f90b87269
    0xffffff811a97bb70 : 0xffffff800facef16
    0xffffff811a97bb90 : 0xffffff800fad0511
    0xffffff811a97bbf0 : 0xffffff800facdf7f
    0xffffff811a97bd40 : 0xffffff800f6b6998
    0xffffff811a97be50 : 0xffffff800f626bc1
    0xffffff811a97be80 : 0xffffff800f6139c5
    0xffffff811a97bef0 : 0xffffff800f61e013
    0xffffff811a97bf70 : 0xffffff800f6c9b8d
    0xffffff811a97bfb0 : 0xffffff800f6f3f66
          Kernel Extensions in backtrace:
             com.apple.ATIRadeonX2000(8.2.4)[BFD0EB65-EA22-3764-9184-80A8EA8DF304]@0xffffff7 f90b7c000->0xffffff7f90daafff
                dependency: com.apple.iokit.IOPCIFamily(2.9)[4662B11D-2ECA-315D-875C-618C97CDAB2A]@0xffffff 7f8fcbe000
                dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f904d0000
    BSD process name corresponding to current thread: WindowServer
    Mac OS version:
    13E28
    Kernel version:
    Darwin Kernel Version 13.3.0: Tue Jun  3 21:27:35 PDT 2014; root:xnu-2422.110.17~1/RELEASE_X86_64
    Kernel UUID: BBFADD17-672B-35A2-9B7F-E4B12213E4B8
    Kernel slide:     0x000000000f400000
    Kernel text base: 0xffffff800f600000
    System model name: iMac11,1 (Mac-F2268DAE)
    System uptime in nanoseconds: 100819732671
    last loaded kext at 53020931504: com.apple.driver.AudioAUUC    1.60 (addr 0xffffff7f918ad000, size 28672)
    loaded kexts:
    com.apple.driver.AudioAUUC    1.60
    com.apple.driver.AppleHDAHardwareConfigDriver    2.6.3f4
    com.apple.driver.AppleTyMCEDriver    1.0.2d2
    com.apple.driver.AGPM    100.14.28
    com.apple.driver.AppleMikeyHIDDriver    124
    com.apple.driver.AppleHDA    2.6.3f4
    com.apple.iokit.IOBluetoothSerialManager    4.2.6f1
    com.apple.filesystems.autofs    3.0
    com.apple.driver.AppleMikeyDriver    2.6.3f4
    com.apple.driver.AppleHWSensor    1.9.5d0
    com.apple.driver.AppleUpstreamUserClient    3.5.13
    com.apple.kext.AMDFramebuffer    1.2.4
    com.apple.iokit.IOUserEthernet    1.0.0d1
    com.apple.ATIRadeonX2000    8.2.4
    com.apple.driver.AppleMuxControl    3.6.22
    com.apple.iokit.IOBluetoothUSBDFU    4.2.6f1
    com.apple.Dont_Steal_Mac_OS_X    7.0.0
    com.apple.driver.AppleBacklight    170.3.5
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport    4.2.6f1
    com.apple.kext.AMD4800Controller    1.2.4
    com.apple.driver.AppleHWAccess    1
    com.apple.driver.AppleLPC    1.7.0
    com.apple.driver.AppleMCCSControl    1.2.5
    com.apple.driver.AppleIntelMCEReporter    104
    com.apple.driver.ACPI_SMC_PlatformPlugin    1.0.0
    com.apple.driver.AppleIRController    325.7
    com.apple.driver.AppleUSBCardReader    3.4.1
    com.apple.driver.AppleFileSystemDriver    3.0.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN    1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
    com.apple.BootCache    35
    com.apple.iokit.SCSITaskUserClient    3.6.6
    com.apple.driver.XsanFilter    404
    com.apple.iokit.IOAHCIBlockStorage    2.6.0
    com.apple.driver.AppleUSBHub    683.4.0
    com.apple.driver.AppleFWOHCI    5.0.2
    com.apple.driver.AirPort.Atheros40    700.74.5
    com.apple.iokit.AppleBCM5701Ethernet    3.8.1b2
    com.apple.driver.AppleAHCIPort    3.0.5
    com.apple.driver.AppleUSBEHCI    660.4.0
    com.apple.driver.AppleUSBUHCI    656.4.1
    com.apple.driver.AppleACPIButtons    2.0
    com.apple.driver.AppleRTC    2.0
    com.apple.driver.AppleHPET    1.8
    com.apple.driver.AppleSMBIOS    2.1
    com.apple.driver.AppleACPIEC    2.0
    com.apple.driver.AppleAPIC    1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient    217.92.1
    com.apple.nke.applicationfirewall    153
    com.apple.security.quarantine    3
    com.apple.driver.AppleIntelCPUPowerManagement    217.92.1
    com.apple.driver.DspFuncLib    2.6.3f4
    com.apple.vecLib.kext    1.0.0
    com.apple.iokit.IOAudioFamily    1.9.7fc2
    com.apple.kext.OSvKernDSPLib    1.14
    com.apple.iokit.IOSerialFamily    10.0.7
    com.apple.kext.triggers    1.0
    com.apple.iokit.IOSurface    91.1
    com.apple.iokit.IOBluetoothFamily    4.2.6f1
    com.apple.driver.AppleGraphicsControl    3.6.22
    com.apple.driver.AppleBacklightExpert    1.0.4
    com.apple.iokit.IONDRVSupport    2.4.1
    com.apple.iokit.IOBluetoothHostControllerUSBTransport    4.2.6f1
    com.apple.kext.AMDSupport    1.2.4
    com.apple.AppleGraphicsDeviceControl    3.6.22
    com.apple.driver.AppleSMBusController    1.0.12d1
    com.apple.driver.AppleHDAController    2.6.3f4
    com.apple.iokit.IOGraphicsFamily    2.4.1
    com.apple.iokit.IOHDAFamily    2.6.3f4
    com.apple.driver.AppleSMBusPCI    1.0.12d1
    com.apple.iokit.IOFireWireIP    2.2.6
    com.apple.driver.AppleSMC    3.1.8
    com.apple.driver.IOPlatformPluginLegacy    1.0.0
    com.apple.driver.IOPlatformPluginFamily    5.7.1d6
    com.apple.driver.AppleUSBHIDMouse    180.9
    com.apple.driver.AppleHIDMouse    180.9
    com.apple.driver.AppleUSBHIDKeyboard    170.15
    com.apple.driver.AppleHIDKeyboard    170.15
    com.apple.iokit.IOUSBHIDDriver    660.4.0
    com.apple.iokit.IOSCSIBlockCommandsDevice    3.6.6
    com.apple.iokit.IOUSBMassStorageClass    3.6.0
    com.apple.driver.AppleUSBMergeNub    650.4.0
    com.apple.driver.AppleUSBComposite    656.4.1
    com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.6.6
    com.apple.iokit.IOBDStorageFamily    1.7
    com.apple.iokit.IODVDStorageFamily    1.7.1
    com.apple.iokit.IOCDStorageFamily    1.7.1
    com.apple.iokit.IOAHCISerialATAPI    2.6.1
    com.apple.iokit.IOSCSIArchitectureModelFamily    3.6.6
    com.apple.iokit.IOFireWireFamily    4.5.5
    com.apple.iokit.IOUSBUserClient    660.4.2
    com.apple.iokit.IO80211Family    640.36
    com.apple.iokit.IOEthernetAVBController    1.0.3b4
    com.apple.driver.mDNSOffloadUserClient    1.0.1b5
    com.apple.iokit.IONetworkingFamily    3.2
    com.apple.iokit.IOAHCIFamily    2.6.5
    com.apple.iokit.IOUSBFamily    683.4.0
    com.apple.driver.AppleEFINVRAM    2.0
    com.apple.iokit.IOHIDFamily    2.0.0
    com.apple.driver.AppleEFIRuntime    2.0
    com.apple.iokit.IOSMBusFamily    1.1
    com.apple.security.sandbox    278.11.1
    com.apple.kext.AppleMatch    1.0.0d1
    com.apple.security.TMSafetyNet    7
    com.apple.driver.AppleKeyStore    2
    com.apple.driver.DiskImages    371.1
    com.apple.iokit.IOStorageFamily    1.9
    com.apple.iokit.IOReportFamily    23
    com.apple.driver.AppleFDEKeyStore    28.30
    com.apple.driver.AppleACPIPlatform    2.0
    com.apple.iokit.IOPCIFamily    2.9
    com.apple.iokit.IOACPIFamily    1.4
    com.apple.kec.corecrypto    1.0
    com.apple.kec.pthread    1
    Model: iMac11,1, BootROM IM111.0034.B02, 4 processors, Intel Core i7, 2.8 GHz, 8 GB, SMC 1.54f36
    Graphics: ATI Radeon HD 4850, ATI Radeon HD 4850, PCIe, 512 MB
    Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631
    Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631
    Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
    Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.74.0-P2P
    Bluetooth: Version 4.2.6f1 14216, 3 services, 15 devices, 0 incoming serial ports
    Network Service: Wi-Fi, AirPort, en1
    Serial ATA Device: ST31000528AS, 1 TB
    Serial ATA Device: OPTIARC DVD RW AD-5680H
    USB Device: Hub
    USB Device: Built-in iSight
    USB Device: IR Receiver
    USB Device: Hub
    USB Device: Keyboard Hub
    USB Device: Apple Optical USB Mouse
    USB Device: Apple Keyboard
    USB Device: BRCM2046 Hub
    USB Device: Bluetooth USB Host Controller
    USB Device: Internal Memory Card Reader
    Thunderbolt Bus:

  • T510: Can't load Windows 7, Keeps rebooting only works in safe mode

    Trying to get my T510 up and running after my W520 went DOA after a bios update.  When i power on the laptop it tries to load Windows 7 then goes into a rebooting loop.  I can get into safe mode with networking just fine without issues, so i figured it was a display driver problem.  In safe mode I unstalled the Nvidia drivers and tried to reboot but still got the same issue.  I went into the BIOS to see if I could disable optimus and use just the intel GPU, but I don't even see a setting for disabling it or reference to the NVidia GPU at all.  I'm positive it was there before. 
    I've swapped hard drives and memory modules out.  Even tried to do a fresh install of Windows and it still won't load.  I'm out of ideas.  Any help would be greatly appreciated.  Thanks.

    Try and applied the machine updated in Safe mode. It usually works. If your install is from MS DVD then be sure all the foundation software is installed. Chipset tool especially and build from there.
    You could also run the memory diagnostic after booting from the MS Windows 7 DVD. Eliminate a bad memory module. (If you have two) take the first on out and move the second one into the first slot. See if its stable, remove and insert the other SODIM into the first slot. Why, normal mode is very intense on RAM and also address a lot more memory.
    T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
    Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
    Windows 7 Home Prem - 64bit w/8GB DDR3

  • Indesign CS6 only works in safe mode (windows 7)

    I have installed the CS6 suite in Windows safe mode (after multiple attempts did not work in normal mode, it kept stopping at 2% installed) using the Adobe application manager. I am on a trial period, my company is going to start paying monthly after the first free month.
    All the adobe products work ok (photoshop, illustrator, dreamweaver etc), except Indesign. When I double click the icon, the hourglass appear for a few seconds and nothing else.
    If I double click the Indesign icon with Task manager open I can see that it appears as a 'process' for about 10 seconds, then disappears.
    If I go into Safe mode Indesign will open and work but obviously this isn't ideal.
    How can I fix this?
    Any help would be great.
    (I have done all the usual things, like uninstall the whole package & install again, restart etc. I also ran the Adobe suite cleaner tool incase old versions on this computer were interfering. I uninstalled everything, and deleted the Adobe folder etc.)
    I am using Windows 7 Professional with a fast processor, 8gb ram.

    Ability to run in safe mode but not in normal Windows operation could point to a conflict between InDesign and the driver for your graphics card. In safe mode, only a generic Windows video driver is used, regardless of your video card. Otherwise, whatever secret sauce driver provided by the provider of your video card is used. InDesign, as well as other Adobe applications, depends heavily on your video card and if your video card supports direct access to its GPU (if it has one), these applications make use of same.
    See if there is an updated driver for your video card that you can download. From what I can see, some of the video card manufacturers almost have a driver du jour posted to fix various problems reported by users. If you have the latest driver, see if there are settings associated with “optimization” or “performance” via any control panel item or utility associated with the video card and try scaling those back. That might finesse the problem.
              - Dov

  • HELP! Finder gives SPOD, only works in safe mode.

    I hope someone else out there has experience with this issue, I am stuck. My wifes Macbook Pro just hangs after booting and gives the spinning pinwheel of death. I can't open or close anything and can only do a hard restart. It works fine in safe mode. She uses Parallels often but hasn't had any issues in the last year she has used it.
    Specs are:
    OS X Version 10.8.2
    2.7 GHz Intel Core i7
    4 GB 1333MHz DDR3
    13 inch screen, Intel HD Graphics 3000 384MB
    500 GB SATA with 125 GB free
    Here is what I've done so far:
    - Installed all software updates
    - Cleaned the caches manually
    - Deleted the .plist files for finder
    - Verified all disk permissions
    - Verified the hard drive
    - Nothing is in the user account start-up preferences
    - Reset the PRAM
    - Entered Single User Mode and run /sbin/fsck-f
    I have no idea what is going on with it. The problem just happened out of the blue though she said it had been slow for a while coming out of sleep and locking up in Safari. Could it be a RAM issue? Or Lion? I'm ready to do a little "percussive maintence" on it if it keeps up!

    Well you have done everything correct and supplied itemized list of your actions.
    I do not suspect Parallels was your problem.
    A couple possible alternatives:
    With ML 10.8 you can boot into Recovery and reinstall the OS on top of your existing OS. All data and documents will remain untouched and intact. Of course alway good to have a back-up in case something goes wrong here.
    Recovery  http://support.apple.com/kb/HT4718
    You could restore from TimeMachine or a bootclone previous to the problem appearing.
    And yes you can create a new user account with admin priveldges and move your data/documents.
    http://reviews.cnet.com/8301-13727_7-20016747-263.html  (still applicable for 10.8)
    http://pondini.org/OSX/Transfer.html
    I cannot  necessarily state which would be the better option  since the problem remains unresolved.
    MacBook Pro, Mac OS X (10.8.2) 2.4GHz IntelCore i5 320 HD 8GB RAM ParallelsDesktop8.0 iPhone5_iOS6.1

Maybe you are looking for

  • What are the uses of ThreadLocal

    Hi all, Can anyone give me an example on the use of ThreadLocal class. Does static methods need to be synchronised when working on ThreadLocal variables ?. rgds Antony Paul

  • EDI order on quota block before EDI block

    Hi, Order xxxx is received via EDI. Checking the order in VA14L shows that the order is on quota block where it is expected to be on EDI block first. Checking the change log of the order shows there was no release of the order from EDI block. Please

  • Problem with processing edited inbound idoc

    hi i am editing an inbound idoc as a result it goes to status 69. Then to process this IDoc through program 'RBDAPP01', i am changing the status of the idoc to 64 through IDOC_STATUS_WRITE_TO_DATABASE'. But after that when i am calling transaction fo

  • I need to open multiple files in elements 12

    I want to put two images into an empty file. In earlier versions I could open both images and the new file in the workspace at one time. Wih #12 I can only open one file at a time. How do i get past this? I want to drag both images into the file and

  • Issue with dowload BLOB objec to JPG file in abap.

    Hi, experts. I need to download file types BLOB(from ORACLE TABLE) to JPG file, in abap i select this line into xstring, but if i use FM like this file not openned image. Couldn you help me? very mach thanks for answers. DATA: BEGIN OF gt_tab OCCURS