External Display not working with MacBook

I just purchased a Mini-DVI to Video Adapter so that I could hook my MacBook into a TV and I found that it won't work when I'm using Windows XP, but works fine in OSX. All I want to do is connect my MacBook to my TV using Windows. S-Video is what I'm using to connect. Anyone know a fix?

The following drivers are provided by apple and solve the problem for me. After installation get into nvidia settings and allow to adjust TV settings automatically..
If you use Windows XP: http://download.info.apple.com/MacOS_X/OTHER/BCNVIDIA/WinXP32(167.44).exe
If you use Windows Vista: http://download.info.apple.com/MacOS_X/OTHER/BCNVIDIA/WinVista32(167.44).exe
I hope this helps!

Similar Messages

  • External Display not working with MacBook Pro 13" (early 2011)

    I just bought the current MacBook Pro 13" (i7 processor). My external display (Benq 20"W, 1600x1050) always says "No Signal Detected!". I've tried it with a DVI-Adapter (Griffin Video Display Converter) and with a VGA-Adapter (LMP Mini DisplayPort-VGA-Adapter). With lower resolution I once got a picture (but with weird lines). On my old MacBook (white, 2.16 Ghz) there was never a problem with this display (also OS X 10.6.6). Who can help?

    Check this post if you want more info:
    http://discussions.apple.com/thread.jspa?threadID=2774718
    The gist is that DVI is currently very iffy through Thunderbolt. Mini display -> mini display OR mini display -> HDMI should work fine. It's most likely not your adapter itself but the fact that it's DVI.
    If you can, get a mini display -> HDMI adapter and try that (assuming your external has HDMI).
    I should hear back tomorrow or Monday from apple engineers with more specific info about this issue and I will update then.
    BTW- DVI anywhere in the chain will make things fail. Mini Display -> DVI and a DVI/HDMI cable won't work with any reliability (I've tested it on three completely different monitors).

  • External Monitor Not Working With Macbook Pro

    My computer was working fine with an external monitor, then my computer froze, and I had to hold down the power button. When I turned it back on, my computer would not work with an external monitor. I've tried different cables, so it's not the cable. The monitor is being detected by the computer, but nothing is showen on the external monitor. When connecting the monitor to the computer, the computer's screen goes blue, then turns back to normal. I
    I cannot reset the SMC by removing the battery, I do not have the confidence to remove my battery, and do not have the time to send the computer to someone else to do it.
    I also tried updating my OS from 10.7.4 (Might've been 10.7.3) to 10.7.5.
    My computer is a MacBook Pro (13-inch, Mid 2010), running OS X 10.7.5 Lion.
    I need to get this problem fixed ASAP, any help is appreciated.
    Kind Regards,
    Sergee237

    I forgot to mention, I'm connecting the monitor via MiniDisplay -> HDMI. I've also tried USB -> HDMI and USB -> DVI -> HDMI but none of them seem to work.

  • External isight not working with Macbook Pro early 2008

    My external isight is not working with my Macbook Pro early 2008 (2.4 GHz, Intel Core 2 Duo, 6 GB RAM, OSX Lion). It goes warm when plugged into the firewire port but is not recognized in system prefs (lists as "unknown device" and also does not turn on (green light. I tried resetting PRAM and all the other stuff as suggested here but no luck. It used to work fine on a 1st generation Macbook and I remember that one of the first times I tried it with this machine here it turned on for a few secs (green light) but then it just simply stopped.
    Unfortunately, I have no other firewire device to check the port.
    Any ideas, dear community?

    Our (old) external Firewire iSights can be sensitive to dust, shock, vibration, humidity, and other environmental factors in storage.  (I store my spare in its original plastic shipping case with a new desiccant pack on a solid shelf - never in a desk drawer or other container that moves.) 
    You have tried several good things and may be finding that your old iSight needs work. 
    Here are the alternatives I can offer.  Consider any you have not tried in any order you like:
    (1) You can try Apple's suggestions from http://support.apple.com/kb/HT2090
    Test in more than one user account and with more than one Apple softwre application.
    (2) My expanded suggestions here: http://www.ralphjohns.co.uk/EZJim/EZJimpage4.html
    (3) Reset Firewire ports using the info from this old archived Apple article: http://web.archive.org/web/20090331211534/http://support.apple.com/kb/HT1317
    (4) If you have no local Apple Authorized service Provider who can help you, other service options are here: http://www.apple.com/support/isight/service/
    (5) Consider a new USB cam with current warranty such as one of these: http://www.mac-compatible-web-cam.com/
    Message was edited by: EZ Jim

  • External display only works with Macbook open?

    I have an Acer AL2623W which works fine as an additional or main screen, but a second after you close the laptop the screen goes blank and it shows an 'input not supported' error. The Macbook stays on, it just doesn't drive the monitor alone. Re-open the Macbook and both work normally!

    Hello Siôn Dafydd,
    Welcome to the Apple Support Communities!
    I understand that you are using an external display with your MacBook Pro and when you close the display on your MacBook Pro, the second display turns off. It sounds as though your MacBook Pro may not be connected to power while using with display closed. Please read over the attached article for information on using a second display in closed-clamshell mode.
    How to use your Mac notebook computer in closed-clamshell (display closed) mode with an external display - Apple Support
    Have a great day,
    Joe

  • Two BenQ external displays not working with new 27" iMac

    I have a 27" iMac (newest model) and have been using it with a BenQ BL2710 monitor.  It's connected with a mini display port to display port cable.  It's been working great; I found that I had to uncheck the 'Displays have separate spaces' box in Mission Control, so I have the menu bar on the iMac'd display only.
    Now, I have a 2nd BenQ BL2710 that I'm trying to hook up the same way, using the iMac's 2nd thunderbolt port.  The display powers up and all 3 screens look perfect.  The problem is getting the arrangement correct.  I have the dock on one display, the menu bar on another, and the mouse will only work on one or two of the displays, depending on how I change the arrangement.
    I want the dock and the menu bar to be on the iMac's display ply, which is in the center.  Is there a trick to getting this done, or do I need a third party dock or other piece of hardware to get it to work?

    I just answered my own question; apparently with two external displays connected, the dock has to be positioned on the bottom.  I had it on the right of the main iMac display.  Moving it to the bottom, and rearranging the position of the monitors in display preferences did the trick.
    If anyone knows of a way to accomplish this without moving the dock to the bottom of the screen, I'd be interested.  I'd prefer it on the right side, if possible.

  • External "Superdrive" not working with macbook?

    My macbook has a broken disk drive but I have a superdrive, how do i get it to work?  Computers with internal disk drives don't seem to like working with external ones.

    Just about any external optical drive, other than Apple's, will work. For exampe, this one recommended by Macworld:
    http://www.amazon.com/AmazonBasics-Writer-External-Optical-Drive/dp/B003M0NT1M?t ag=gmgamzn-20

  • IMac external display not working with mountain lion

    I have an iMac 3.4 Intel Core i7, have used an external monitor for a program for ever.  Upgraded to Mountian Lion and no more external monitor.

    Update/Fixed - I talked with Apple support via phone since I had 90 days of complimentary support.  After describing my troubleshooting the rep recommended reinstalling 10.9.  I did that this morning and the remote monitor is back in service.  So it appears something broke in 10.9 that is fixed by the re-install.  It would be nice to know if it's a simple preference that could be trashed.  But it looks like hardware is not the issue. 

  • External display not working with i-mac.

    Using a newer i-mac 2013. My acer monitor stopped working entirely when i installed the newest OS 10.9. Already tried the ram resets and display resets. Any help?

    The display was not added as it simply won't detect if the monitor is there, "no signal detected."
    Yes the display worked fine prior to upgrading to Mavericks. I just tried the shut-down and then restarted, but still no luck... I'd hate to have to take it back to the apple store and have them look at it...

  • Hardware test not working with Yosemite, External Display not working with Yosemite

    What's wrong with Yosemite developers....
    i can't connect my macbook pro with my tv and if i wanna start a hardware test, it doesn't starts it....
    please help as apple *****!!!

    It would be helpful if you indicated the exact model/year Macbook that you have.
    Ciao.

  • Thunderbolt display not working on Macbook Pro - previously the display did work

    Thunderbolt display not working on Macbook Pro - previously the display did work

    I have upgraded ML but when the MBP tries to restart with the upgrade the MBP does not restart so I susapect the ML upgrade is not complete ? When you refer to 10.8.5 supplemental is this a separate upgrade ? When I connect the Thunderbolt to the MBP the Thunderbolt charges my MBP & I can play music from iTunes via the Thunderbolt. It is only the display that is not working on the Thunderbolt

  • Lightroom (CC) 2015 is not working with Macbook pro 2015 model ! any clues about it ??

    lightroom (CC) 2015 is not working with Macbook pro 2015 model ! any clues about it ??

    Ahmed
    Generally signing out and signing in (signing out and back into the Creative Cloud application ) will fix this. If it isn't resolving the issue for you, let us know what you see and we can try something else.
    Pattie

  • Macbook (Late 2007) External Display Not Working

    I have an acer x243hq 1920x1080 external monitor which works with my Xbox 360 (vga cable) and my friends macbook (early 2008) but not my macbook
    when plugging the external monitor into my macbook using the minidvi to dvi adapter the macbook screen goes light blue and flashes continuously until i remove the cable, the external monitor is just black (does NOT display "no signal") when the cable is removed the cpu seems to have been running at 100%.
    i have tried using my friends macbook hard drive in my macbook and the problem is still there therefore the problem must be hardware related?
    i have all current updates
    Thanks for any replys on how i can fix this

    Have you downloaded the Mac OS X (10.5.4) Combo Update? I posted my problem, very similar to yours, and in researching it I found it at: http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1054comboupdate .html. It might just be what you need!
    My problem is that I am running 10.5.7, which I blame for my external display not acting like it did when I was on 10.5.6! One expert at Apple Support told me to erase my HDD, reinstall Tiger, upgrade to Leopard again, but only to 10.5.6! Has anyone any idea as to when 10.5.8 is due out? Is there a Beta?

  • FaceTime HD Camera (Display) not working with most applications

    The Thunderbolt 27" LED Cinema displays built in camera is not working with most applications. The camera does not work with FaceTime, iChat, Skype and Google Talk. FaceTime says "There is no connected camera", even though there is. Weird thing is it DOES work at http://www.testmycam.com. I can't get it to work with any other flash based apps, just testmycam.com.
    My MacBook Pro 17" (late 2011) built in camera works perfectly with everything.
    Things I've already tried:
    - Shutdown
    - Restart
    - disconnect/reconnect
    - removing power from display
    lame, lame, lame. $1k monitor, flippin' webcam doesn't work.

    I think I have found the problem. I decided to go page by page through the forums and found this argument when running a Java program through the console:
    -Dsun.java2d.noddraw=true
    So it would be like:
    java -Dsun.java2d.noddraw=true SwingSet2
    That works flawlessly, so it has to do with direct draw (So it's either DirectX or my video card drivers which are up to date).

  • Display not working with new operating system

    I recently installed OS X version 10.8.2 and now my large apple display will not work with the MacAir.  Anyone know how to fix this?

    Return to place of purchase while in your 14 days from date of purchase window. You may have a defective monitor or GPU.

Maybe you are looking for