External display too blueish

I just bought a Samsung 226BW, and its a great monitor, but things are more blue than the Macbook display. It is driving me nuts!
I have it connected via DVI, and it reads as digital DVI on the display. I have gone through the calibration process several times, and used the native profile, but nothing seems to make it that close to the Macbook display. The MB display is set to use the native profile.
I can really tell a difference when I open Safari, and look at the window border. On the Macbook it is a light-grey steel color, on the Samsung it is more of an intense dark grey, almost blueish.
Is there a way to make them more similar?

I have the 940BW. You might try adjusting the tintin the monitors menu. There is a color adjustment there which I found worked very good for me. There are a few extra setting there that will help make it to your preference. Mine was a little to red so I set it there and got it just right for me.

Similar Messages

External display font size

I guess this is a request for the next software update - please enable users to enlarge the font size/screen layout for the messaging previews that appear on the external screen. It is very hard to read as is.
Thanks!

I'll second that! Can't believe BB loaded a gazillion fonts and sizes for the interior display but no way to apply them to the external display too. What were y'all thinking?

HT3131 Macbook pro + external display sleeps when lid closed and 'clicking' noise

Hi all, new mid-2012 macbook pro non-retina user, I have an PC external display with Microsoft USB wired keyboard and mouse pair (the keyboard and mouse are wireless but connected via a USB desktop receiver) but even when all connected up, shutting the mac lid always turns off external display too and no amount of pressing keys or mouse clicking wakes up the display again. External display only wakes up when I open the lid again. There's also a clicking noise from the mac every time I close the lid with external display connected. Any ideas? I've tried a number of things, wondering possibly if my cheapo (non-Apple) VGA external display to Minidisplayport adaptor is the culprit? Also, everytime I connect the display I have to go to display settings to get it to recognise the external display. I haven't installed any software for the USB mouse and keyboard , the macbook recognises it ok.

Hi Itsfixed,
It sounds like you are having issues running your MacBook Pro in closed clamshell mode (computer closed but awake, connected to an external display). If possible, you may want to see if it behaves as expected when connected to a wired USB keyboard and mouse as outlined in the first section of the article; wireless USB (non-Bluetooth) keyboards may not be recognized by the system the same way for the purposes of running with the display closed.
Regards,
- Brenden

Images too dark on external display

Hello,
I use Lightroom on my (Lenovo) notebook. Because of the small screen size, I tried using it with an external (Samsung) display. However, when I open Lightroom on the external display, all the images suddenly seem way too dark. It is the case that this display is generally too dark, because when I view the same picture in a photo viewer or a browser it is not too dark. See for example this screenshot. On the left hand you see an image (export from Lightroom) in my browser, on the right hand the same image in Lightroom. You can clearly see it is much darker. When I view both images on the screen of the notebook itself, there is no difference between them.
Actually, when I move the Lightroom window from the notebook display to the external display, you can clearly see Lightroom adjusting the images from light to dark.
Does anyone know what causes this, and how I can prevent Lightroom from showing the images too dark?
Thanks!

I guess you misunderstood my problem. It's not only that images on the external display are way darker than on the notebook, but also that on the external display images in Lightroom are much darker than when I view the same image on the same display in a photo viewer or a browser. In the screenshot pictured above both the light and the dark version of the image are on the same external display.
However, in the meantime I found a solution. Changing the Windows Color System device profile to a non-WCS-profile did the trick: Photos appear as black, gray rectangles | Lightroom | Windows
Thanks anyway for trying to help.

How do I set MacBook to an external display when the plug and play doesn't recognize it? I am trying to set my Samsung 530 LCD as a monitor but HDMI and VGA cords (and the adaptor for them) doesn't seem to work.

I have tried everything I can find on line but they all claim that the plug and play works, and they don't for me. I tried the mini dvi to HDMI and a HDMI cord and that was not recognized no matter which unit I rebooted first. I found someone who said that my Macbook might be too old for the HDMI technology so I returned the cords and went to the VGA cord and adaptor.
I tried this first with the HDMI setup:
http://support-us.samsung.com/cyber/popup/iframe/pop_troubleshooting_fr.jsp?idx= 167919&modelname=LN40C650L1F&modelcode=&session_id=NDhJrD0DQT0Z8KRsm62yhxJxqnyPy SKhlhpB8vQ6h9Q7R2BZJGzj!-1089109758!1761676444!7501!-1!434477884!1761676348!7501 !-1!1292098185857
Then I tried this with the VGA setup:
http://support-us.samsung.com/cyber/popup/iframe/pop_troubleshooting_fr.jsp?idx= 167901&modelname=LN40C650L1F&modelcode=&session_id=NDhJrD0DQT0Z8KRsm62yhxJxqnyPy SKhlhpB8vQ6h9Q7R2BZJGzj!-1089109758!1761676444!7501!-1!434477884!1761676348!7501 !-1!1292098185857
I contacted Samsung support and they said I needed to set the display settings to external display on the mac. I went to the display settings and moved the icon to my status bar. When I click on search for displays or whatever it says (I'm not at my Mac right now) it does nothing.
What am I missing?

I am using MAC OSx 10.5.8 (9L31a) as my operation system. The TV says "No signal. Check connected device's power, cable connection and source selection." Seems to me that that goes in hand with what the Samsung tech said about the Mac needing to be forces to use the external display. But how do I do that?

Macbookpro doesn't recognize max resolution of an external display

hi
i have a macbook pro 7.1
i just bought an external display, LG IPS237L-BN 23 inch Full HD IPS LED Widescreen Monitor (250 cd/m2, 1920 x 1080, 5000000:1, D-sub, HDMI)
my mac doesn't seem to recognize the resolution. after some internet research, it seems to be a common problem, except that all i've seen are some solutions via dvi port. My monitor has only 2 hdmi (from what i can tell, i'm no expert), and some "d-sub", whatever that is.
I've had a small mdp adapter, connecting via hdmi-to-hdmi cable to the monitor, but to no success. I thought it may be the prob with the adapter as i've bought it a while back, so i went and got a mdp-to-hdmi cable (this one: http://www.amazon.co.uk/gp/product/B00675Q2UY/ref=oh_details_o01_s00_i00?ie=UTF8 &psc=1), but again, the max resolution in display preferences is 1600x900, and all is blurred, while my main purpose is photo and video work.
Any advice?

Hi
did you found the solution?
I have MBP 7.1 too, and just bought an LG 22" FullHD monitor, but i got the same problem.
I can set the resolution to 1920x1080 but the screnn on external display is not like fullHD, and its not as colorful as it can be(I tried the monitor with my windows laptop, and the colors and resolution was ok).
I'm using Mini DisplayPort to VGA adapter to connect them.
Help me if you can!
Many thanks,
nelsonhun

External display flashes and shows 'snow'. (Video of behaviour included)

Since yesterday, my Macbook Pro is acting strange. When I connect it to an external monitor, it usually works. Everything goes well for 10 to 30 minutes, and at some point the display starts tearing, showing snow, and flashing. These flashes get worse and worse, up till the point where I have to reboot. Rebooting seems to help a little. Whenever the laptop hasn't been used for a few minutes it works correctly again, for a short while. (This makes me conclude it's some sort of heat-related issue)
The issue is present on multiple monitors using different DVI cables. I only have one mini-displayport to dvi adapter, so the problem could be there too.
This problem does not affect the internal display of the macbook in any way.
Here is a short video showing the behaviour:
http://www.youtube.com/watch?v=4BotUqHb3dM
What should I do? Try to figure out wether it's the mbp or the connector or just bring it in for a repair. (It's less than a year old)

I have had similar issues with my 15" MBP. Occasionally my external monitor will go 1980s and display what looks like crappy tv reception.
Also, connecting or disconnecting an external display (via the single link mini display port to dvi adapter) has a tendency to lock up the entire machine (both displays black, won't respond to keyboard or mouse) until the power is cycled.
Also, my built in monitor has a habit of flickering/glitching lines.
These problems seem to happen regardless of which graphics card is active.

Intel iMac won't recognize external display with Dynex mini-DVI adapter

I've got an original Intel iMac with a Mini-DVI connection on the back. I'm attempting to hook it up to an external display (a plasma screen, in fact). I picked up a Dynex Mini DVI to Video Adapter DX-AP100 for Apple. This connector has a mini-DVI connector on one end, and both a video-out and an S-video-out on the other.
When attempting to use the adapter, the iMac does not recognize that there is an external display connected. Here are the facts:
The external display: I've tried this with a Panasonic Plasma screen connected directly through S-video, as well as a Pioneer receiver (one that switches video) connected both through s-video and composite video. And yes, I've got the settings on the TV correct. I've also tried this with a Polaroid LCD TV connected via S-video and composite video.
I did notice that when I click "Detect Displays" while the Plasma was connected, the plasma briefly "flashed", implying SOMETHING was happening, but still no dice.
Anyone have any experience with this Dynex DX-AP100 that could share some wisdom?
OS: v10.5.6
System Profiler:
ATI Radeon X1600:
Chipset Model: ATY,RadeonX1600
Type: Display
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 128 MB
Vendor: ATI (0x1002)
Device ID: 0x71c5
Revision ID: 0x0000
EFI Driver Version: 01.00.068
Displays:
iMac:
Resolution: 1440 x 900
Depth: 32-bit Color
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Built-In: Yes
Display Connector:
Status: No display connected

Yeah, I realize S-video is limiting, but I'm trying to keep things as simple as possible. The TV is mounted to the wall and there are not currently any DVI or HDMI cables coming out of it. There's an S-video input from my receiver that I'd prefer to use since it's readily accessible already. In the end my goal is to use Netflix "Watch Now" on the TV, so I'm not too worried about video quality.
and before someone asks if I considered that the receiver's S-video input might be the problem...I tried taking the s-video wire from the stereo and plugging it directly into the adapter. No dice.
ONE ADDITIONAL PIECE of information...while trying to get this to work on an LCD monitor, I plugged the composite video connection from the TV into the adapter. Suddenly the Mac recognized an additional monitor, but it saw it as a VGA monitor, not as s-video or composite video, and no signal went to the TV.
I'm considering trading in this adapter for a mini-DVI to VGA adapter, but that really won't help me with the connection to the TV.

MBPro won't detect external display on DVI

Hi Folks,
I have a strange problem that gives me quite some headache:
Is use a MacBook Pro 3,1 2.2 Ghz, 4GB RAM, 128MB NVidia something together with a Samsung SyncMaster 215TW.
For the past year I was using my external screen without any trouble, connecting it via DVI to the mac. Every night I turn down the lid putting the notebook in sleep mode and switch off the monitor. Exactly as I did yesterday. But this morning however the external display didn't wake up as usual it did just nothing - was not even detected via the detect display function. And this is still the case right now.
So when I plug (or unplug) the DVI to the external something is still going on. I get the blue screen (don't get that wrong that used to appear just before it would expand the desktop to the external screen, but then it switches back as if there would be nothing connected.
No relevant entries in any logfile. System Profiler shows "Status: No display connected". The display itself says some no connection message if unplugged and - get this - falls to sleep mode right after I plugin the dvi connector to the mac.
I tried all this:
-reboot (with display connected & without display connected and all other imaginable combinations) - no positive result
-the display via DVI-VGA adapter works (but the image is not as nice unfortunately)
-reset PRAM (boot with optioncommand+PR)
-reset the entire thing (no power, no battery and hold the powerkey for 10 secs.) nothing
-connect some other external display to the mac via DVI - works perfectly
-connect the display via DVI to an other macbook pro computer - works perfectly too
-hard reset the display via the (red) support menu - no result
-an other DVI cable - no result
-booted from the leopard install cd - same thing
-booted from an other harddisk with 10.4.10 (removing the internal disk)- same strange behaviour with the old system
-booted ubuntu linux 8.04 - even here the same problem X doesn't recognize the external display if it is attached to the DVI port also no entries to the logs here.
-SwitchResX and tried to reset the display setting from there (vendor id 4c2d & product id 213 & 214) but still no success.
- called the apple support and my distributer of trust - no ideas but could be a hardware fault (mmh ok... but why do all other display I tried work perfectly with that beast of macbook pro but not any SyncMaster 215TW?!? that worked great for the whole last year)
I guess the macbook had a very bad dream that very last night about mac eating foo-bars that crawl through DVI cables from any 215TW display.
As for now I have a date with the local apple service partner -- in three weeks (it's holiday time in g.o. germany). Don't know what to tell him: Probably I'll need to go there with the screen to show them the entire scenario. Hopefully they (still) think it's a problem with faulty apple hardware (or system software) and replace the logic board.
But I'm still in hope! Is there anybody out there having an idea with what I could try next to bring back the love between my macbook and the lovely 215TW display?
greetings,
brutus banane

I have recently bough a new Macbook Pro 15.4", it worked first time with a Samsung Syncmaster 2493HM but after a few days the 'detect display' utility ceased to connect, then a short while after on start up I was getting a blank screen with a flashing folder with '?' on it, preventing me from booting up successfully.
I tried the reset p-ram, didn't work then I tried an archive install of OSX and that ironed out all the creases - for a day, there has been no flashing folders on start up but the Samsung has failed to be detected and this morning wouldn't work no matter how many restarts or cable disconnecting attempts.
So I called Apple helpline, told the guy what had happened, he mentioned to try the install discs again with the display connected to see of the MBP sent a signal to it, after choosing the language in the OSX installer, the display was once again recognized! I didn't have to proceed any further with the install discs so quit, reset and ejected the install discs and all seems well again.
For how long i wonder?
I have no idea of this will work for anyone else but it works for me at the moment.
Interested to see when and how this finally gets solved!
T.
Message was edited by: Tyke Tyler
Message was edited by: Tyke Tyler

Incorrect resolutions for 16:10 external displays, unable to detect 16:9

Hey there all, this is my first post here. It looks like some people have had similar issues—particularly with an incomplete/incorrect list of resolutions being provided for external displays.
I am shopping around for an external display for my MacBook (my specs are included) and I tested a few different ones today, but encountered problems.
- On a 22" ASUS monitor (sorry I don't have the model) using Mini-DVI to VGA, the native resolution (I assume 1680x1050) is not available, and most resolutions offered are 4:3 ratio (1600x1200 worked). The highest widescreen resolution listed was 1280x768.
- Next I tried a 19" ASUS, this time 16:9, but the monitor would not display at all. The MacBook display would go blue as normal but then flicker, as if it could not detect the display. This also happened with a 24" BENQ monitor (also 16:9).
Wondering whether or not this was a problem with using VGA, I then bought a Mini-DVI to DVI adapter and tried again on the 19" and 24" (the 22" ASUS did not have a DVI-in) but the same flickering blue screen appeared, with nothing displayed on the monitor.
These were my thoughts:
1. My firmware is not up-to-date. I check in System Profiler and am running Boot ROM Version MB41.00C1.B00 and SMC Version (system): 1.31f0. These are definitely up-to-date for my model MacBook.
2. Drivers are out of date. This does not seem likely as I am running OS X 10.5.7.
Other than that, I am at a loss! I haven't yet forked out the $49 to do phone support with Apple, that will be my next bet.
Has anyone had this problem, or have any ideas what I can try? Short of buying a new Unibody MacBook of course .
Thanks guys, hope you can help. Just let me know if you need more info about my computer.

It's unusual to strike out like that with three different monitors using two different adapters. On the other hand, with all the video issues that have been reported by others on these forums since the 10.5.7 update, it's not too surprising.
Is a 10.5.6 downgrade a possibility for you? For example, do you use Time Machine and can you in that case revert to a previous time when the MB was running 10.5.6? Perhaps that's not a great suggestion, but it would be something to try.
There is some remote chance, though somewhat unlikely given that three different monitors are involved, that the embedded display driver data (EDID) in each monitor is bad or incomplete. If you care to investigate that possibility, there is a program called SwitchRes X that allows you to snoop a monitor's EDID and turns it into a human readable text file.
One final suggestion would be to try yet one more monitor to see if any monitor can return a good result. One obvious choice would be an Apple monitor. If there is trouble when trying to connect to an Apple monitor, then that would certainly point to some problem in the MB's configuration or hardware. And not to cast aspersions on the brands you have already tried, but try another brand (if not Apple) that is perhaps more mainstream and known to be more Mac compatible and less firmly in the PC camp where plug-and-display drivers have never mattered very much and are very often botched by the monitor makers. Dell, Samsung and LG are three big brands that come to mind. Good luck.

Ongoing fatal crash and security bug related to connecting external display

The infrastructures in OS X to resume from sleep, to authenticate, and to change displays is fundamentally not working.
The security bug I have encountered has to do with connecting a cinema display exclusively to a MacBook Pro. This is a specific situation, but please note that I have experienced the same problem on no fewer than three independent laptop. Plus, the Genius in the Apple Retail Store was convinced of the general instability of this infrastructure. The security problem is that hot corners no longer function if I transition between two states in the same reboot. The first state is where I have the laptop powered on and using its own internal display exclusively (when I'm on the road). The second state is when I have the laptop displaying its output exclusively on an external display (when I'm at home). What happens is that an attempt to use hot corners fails. There is no response. I even added configuration on all four corners (whereas I originally had settings only for the rightmost corners), and even then, the hot corner action (of sleeping the display or entering locked screen saver mode) does not commence. This prevents the user from being able to secure the display on demand using standard methods that are supposed to work.
The instability level related to connecting the external display exclusively is high. Again, I've experienced this on no fewer than three independent laptops, and the Apple Genius at the Retail Store confirmed that this aspect of OS X did not work consistently. When I want to connect the cinema display to the laptop in such a way that the laptop's own display is not part of the active screen, the process I use succeeds about half the time. Supposing I have been on the road, where I am using the laptop display exclusively. I then put the laptop to sleep. When I return home with the lid open, I connect first the USB (power) from the cinema display to the laptop, and then I connect the Mini DisplayPort. When that step works, what happens is that the login screen shows on the cinema display despite the fact that my laptop lid is closed. This is good, and is what I want. At that point, I open the laptop lid and quickly log in.
With Apple being a mobile device company, I rely on the laptop for tasks that one traditionally may use a desktop for. This simply points to the versatility of the laptop. But I'd like the bugs resolved, so that I do not have to hesitate to make use of the inherent flexibility possible with the MacBook Pro.
Here's what happens when the process (of connecting the external display in a way that establishes itself as the only screen in use by OS X) fails. Firstly, when I connect the external display via Mini DisplayPort, the laptop doesn't even respond. Instead, it remains asleep. So to work around it I have to repeatedly disconnect and reconnect the Mini DisplayPort so that the asleep MacBook Pro will see that there is a display connected to it. Also, sometimes that isn't even enough and I have to open the laptop lid, and put it to sleep again so as to trigger whatever actions are necessary to recognise the external display (presumably by having the laptop recently awake). Around half the time, I have to play this game of disconnecting and reconnecting until it actually works. This high level of reproducibility (confirmed by the Apple Genius representative's confidence that this part of the system doesn't actually work) should make it easy for an engineer to look into the problem.
Fatally, and recently, OS X has completely crashed when I have attempted to connect the external display. The external display has gone completely blue, and after a half a minute, it blanked out and my entire laptop became unresponsive. I called Apple Support and was given a case number. I also took the laptop into the retail store to see if I could recover my current session without rebooting. There was no process suggested to make that happen and I was told to reboot the machine. I've had this happen before on other laptops, and it is frustrating that the kernel reaches such a state that it cannot be used. As I see it, this problem is not too unrelated to the way that I need to play a game in order to get the external display connected exclusively. Here are some workarounds that could be added:
Firstly, whenever I connect an external display, I'd like the laptop to see that this has happened, and to take action accordingly (such as resuming from sleep). Secondly, If I connect an external keyboard, and press a key on it, I'd like this to wake the laptop too (in the event that the first method fails for some unforeseen reason). I'd also like the connection of the cinema display's USB power not to cause the laptop to enter into a confused state between asleep and awake. Sometimes I need to disconnect and reconnect USB power in order to trigger the laptop into waking, but that's only because it's not doing it on its own properly. On the other hand, I also ensure that the laptop doesn't have the Mini DisplayPort connected without also having the cinema display USB power connected, because that also is an unsupported configuration.
I've also gotten the laptop to become confused about whether it is asleep or awake. When I open the lid, it seems to enter into sleep mode, but closing it seems to bring it into an active state.
Also, I've successfully logged on and authenticated with the screen showing exclusively on the external display. But just ten seconds after I start using the system, the laptop falls asleep--with the lid open! Whatever triggers that action doesn't seem to be on track. The laptop is open, there are incoming events such as mouse movements and key presses, and the external display is on and is in use. And then the laptop falls asleep! This has happened numerous times. Not only should this not happen; the instances where it does happen can cause further instability and put my system at risk of fatally crashing.
Also, the authentication system itself is highly buggy--far more than it should be. At times I have opened the laptop lid and caught a glimpse of a window before I have begun the login process. Also, an external authentication application that asks for Kerberos/AFS login credentials has been able to overlay itself on top of the primary authentication (whereas I should only see a single login dialog when I need to authenticate to the system). Also, I've had several of these authentication screens overlay on top of one another, although it's been months since I've experienced that one (so it may have been fixed). Also, around a third of the time, the window that authenticates me (on the black background) somehow transfers itself into the background (even though there's only one window!). What that means is what I begin to type my password, and now the laptop starts beeping at me and I need to manually click on the password field and begin entering my password again. This really shouldn't happen, and indicates too much complexity in this authentication process (such as, more OS X code is involved than is strictly necessary, which is likely to make the authentication system more difficult to test). Also, at times, I have been using too much CPU, such that the authentication screen takes too long to emerge. That also means that I'm not able to logon until I uncleanly shutdown the laptop. If the laptop has been asleep, and is revived in preparation for login, then that login screen should be given highest priority, even if there are other heavy CPU or I/O intensive tasks running in the background. And maybe the login dialog shouldn't disappear when the user is legitimately attempting to log in. So even if there is a possibility that the system is under heavy resource use (or there is a stall or minor deadlock), it shouldn't prevent the user from logging in altogether.
At the moment, the very fact that the system shut down uncleanly means that the full disk encryption suite that I used has entered into an undetermined state, suggesting I may lose access to all my data. It's my hope that I can rely on Apple's products to interoperate in a way that won't cause me to be fearful and restrictive in my use, so that I can freely connect an external display at times, and at other times carry the laptop on the road.

Ive got the same problem with Samsung UE225010 monitor too, its full hd but it looks terrible, could it be Displayport adapter issue, because couple month ago Ive tryed with some IPS display, and it looked same bad.

Need advice for external display for my retina Macbook Pro.

I got my 15-inch retina Macbook Pro (Mid 2014) two months ago. It’s a fantastic machine but I am having some regrets concerning screen size. I want to be able to enjoy movies on my computer but 15-inch is just too small. So I am considering purchasing an external display for my Macbook Pro. I am thinking about a 25’’+ monitor (or TV) which can offer me closest experience to the retina one on my Macbook. I don’t want 4K monitors though, as most of the contents I consume are full HD 1080P. But I do care about PPI a lot (for browsing).
What kind of display can help me obtain this similar experience I get on my Mac? Any recommendations? Thanks.

I have the 15" MacBook Pro, Retina, Mid 2012 also, same exact model. Kind of the same thing is happening with me. I will intermitentyl get a flickering on the bottom 1/3 of the screen, all the way across. It flickers/flashes on and off on the bottom half or third of the screen, when I am typing or when I am perfectly stil, doen't really matterl. Only happens for a split second, but can do it multiple times, or sometimes not at all. I can go tens of minutes without i hapenning, but I can also go tens of seconds with it happening multiple times.
It never goes black or grey or "out" at all, just randomly flickers throughout the day.
I do get burned-in images all the time, but they disappear within seconds. But this flickering is definitely worrysome. I did get the the Apple Care, so I am not too worried as Apple is usually good about this kind of thing, but I do have a similar problem to you and wanted to document this. I didnt find many other people oiut there with this problem, so let me know what has gone on since your post on the New Year. Any solution? Did you call Apple?
Thanks webrian.
2012 Retina MacBook Pro
15"
500GB Flash Drive, 16GB memory
2.6 Ghz Intel Core i7

External Display Flickers (Intel on board)

Hi,
I have recently made a fresh installation of Arch Linux and trying to setup it for my work environment. I made a basic installation of xfce4 with slim login manager. I wanted to hook my laptop with an external display. I used xrandr to extend my laptop display with the external display. Everything worked fine but my external display flickers insanely bad. I cannot stare at it for > 30s. I dual boot on windows, so I tested the same setup with windows and it worked just fine, out of the box. I even used one of my friend's laptop who's running ubuntu and has the same h/w. It worked out of the box. I have spent more than 8 hours trying to find out where the issue would be and miserably failed. Below are certain logs and output that might help traingulate my issue.
Its a Dell Inspiron N4030, with Intel onboard graphics. I have the xf86-video-intel driver installed and the display works perfectly fine with laptops default display.
Output of xrandr -q
[joker@lucifer ~]$ xrandr -q
Screen 0: minimum 320 x 200, current 2732 x 768, maximum 8192 x 8192
LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 309mm x 173mm
1366x768 60.0*+
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
VGA1 connected 1366x768+1366+0 (normal left inverted right x axis y axis) 344mm x 194mm
1366x768 60.0*+
1024x768 75.1 72.0 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 72.8 75.0 66.7 60.0
720x400 70.1
/var/log/Xorg.0.log
[ 42.854]
X.Org X Server 1.11.2
Release Date: 2011-11-04
[ 42.854] X Protocol Version 11, Revision 0
[ 42.854] Build Operating System: Linux 3.1.0-3-ARCH x86_64
[ 42.854] Current Operating System: Linux lucifer 3.1.0-4-ARCH #1 SMP PREEMPT Mon Nov 7 22:47:18 CET 2011 x86_64
[ 42.854] Kernel command line: root=/dev/sda5 ro
[ 42.854] Build Date: 07 November 2011 07:53:00AM
[ 42.854]
[ 42.854] Current version of pixman: 0.24.0
[ 42.854] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 42.854] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 42.855] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 10 17:07:34 2011
[ 42.901] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 42.927] (==) ServerLayout "DualSreen"
[ 42.927] (**) |-->Screen "Screen0" (0)
[ 42.927] (**) | |-->Monitor "Monitor0"
[ 42.945] (**) | |-->Device "Device0"
[ 42.945] (**) |-->Screen "Screen1" (1)
[ 42.945] (**) | |-->Monitor "Monitor1"
[ 42.945] (**) | |-->Device "Device1"
[ 42.945] (**) Option "Xinerama" "1"
[ 42.945] (==) Automatically adding devices
[ 42.945] (==) Automatically enabling devices
[ 42.945] (**) Xinerama: enabled
[ 43.004] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 43.004] Entry deleted from font path.
[ 43.004] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 43.004] Entry deleted from font path.
[ 43.005] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 43.005] Entry deleted from font path.
[ 43.005] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 43.005] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 43.005] Entry deleted from font path.
[ 43.005] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 43.005] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 43.005] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 43.005] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 43.005] (II) Loader magic: 0x7ccae0
[ 43.005] (II) Module ABI versions:
[ 43.005] X.Org ANSI C Emulation: 0.4
[ 43.005] X.Org Video Driver: 11.0
[ 43.005] X.Org XInput driver : 13.0
[ 43.005] X.Org Server Extension : 6.0
[ 43.006] (--) PCI:*(0:0:2:0) 8086:0046:1028:0466 rev 2, Mem @ 0xfac00000/4194304, 0xc0000000/268435456, I/O @ 0x0000f080/8
[ 43.006] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 43.006] (II) LoadModule: "extmod"
[ 43.027] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 43.043] (II) Module extmod: vendor="X.Org Foundation"
[ 43.043] compiled for 1.11.2, module version = 1.0.0
[ 43.043] Module class: X.Org Server Extension
[ 43.043] ABI class: X.Org Server Extension, version 6.0
[ 43.043] (II) Loading extension MIT-SCREEN-SAVER
[ 43.043] (II) Loading extension XFree86-VidModeExtension
[ 43.043] (II) Loading extension XFree86-DGA
[ 43.043] (II) Loading extension DPMS
[ 43.043] (II) Loading extension XVideo
[ 43.043] (II) Loading extension XVideo-MotionCompensation
[ 43.043] (II) Loading extension X-Resource
[ 43.044] (II) LoadModule: "dbe"
[ 43.044] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 43.045] (II) Module dbe: vendor="X.Org Foundation"
[ 43.045] compiled for 1.11.2, module version = 1.0.0
[ 43.045] Module class: X.Org Server Extension
[ 43.045] ABI class: X.Org Server Extension, version 6.0
[ 43.045] (II) Loading extension DOUBLE-BUFFER
[ 43.045] (II) LoadModule: "glx"
[ 43.045] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 43.060] (II) Module glx: vendor="X.Org Foundation"
[ 43.060] compiled for 1.11.2, module version = 1.0.0
[ 43.060] ABI class: X.Org Server Extension, version 6.0
[ 43.060] (==) AIGLX enabled
[ 43.060] (II) Loading extension GLX
[ 43.060] (II) LoadModule: "record"
[ 43.060] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 43.061] (II) Module record: vendor="X.Org Foundation"
[ 43.061] compiled for 1.11.2, module version = 1.13.0
[ 43.061] Module class: X.Org Server Extension
[ 43.061] ABI class: X.Org Server Extension, version 6.0
[ 43.061] (II) Loading extension RECORD
[ 43.061] (II) LoadModule: "dri"
[ 43.061] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 43.063] (II) Module dri: vendor="X.Org Foundation"
[ 43.063] compiled for 1.11.2, module version = 1.0.0
[ 43.063] ABI class: X.Org Server Extension, version 6.0
[ 43.063] (II) Loading extension XFree86-DRI
[ 43.063] (II) LoadModule: "dri2"
[ 43.063] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 43.064] (II) Module dri2: vendor="X.Org Foundation"
[ 43.064] compiled for 1.11.2, module version = 1.2.0
[ 43.064] ABI class: X.Org Server Extension, version 6.0
[ 43.064] (II) Loading extension DRI2
[ 43.064] (II) LoadModule: "intel"
[ 43.091] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 43.114] (II) Module intel: vendor="X.Org Foundation"
[ 43.114] compiled for 1.10.99.902, module version = 2.16.0
[ 43.114] Module class: X.Org Video Driver
[ 43.114] ABI class: X.Org Video Driver, version 11.0
[ 43.114] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 43.114] (++) using VT number 7
[ 43.134] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 43.135] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 43.135] Requested Entity already in use!
[ 43.135] (EE) Screen 1 deleted because of no matching config section.
[ 43.135] (II) UnloadModule: "intel"
[ 43.136] (II) Unloading intel
[ 43.136] drmOpenDevice: node name is /dev/dri/card0
[ 43.136] drmOpenDevice: open result is 8, (OK)
[ 43.136] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 43.136] drmOpenDevice: node name is /dev/dri/card0
[ 43.136] drmOpenDevice: open result is 8, (OK)
[ 43.136] drmOpenByBusid: drmOpenMinor returns 8
[ 43.136] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 43.136] (**) intel(0): Depth 24, (--) framebuffer bpp 32
[ 43.136] (==) intel(0): RGB weight 888
[ 43.136] (==) intel(0): Default visual is TrueColor
[ 43.136] (II) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale
[ 43.136] (--) intel(0): Chipset: "Arrandale"
[ 43.136] (**) intel(0): Relaxed fencing enabled
[ 43.136] (**) intel(0): Wait on SwapBuffers? enabled
[ 43.136] (**) intel(0): Triple buffering? enabled
[ 43.136] (**) intel(0): Framebuffer tiled
[ 43.136] (**) intel(0): Pixmaps tiled
[ 43.136] (**) intel(0): 3D buffers tiled
[ 43.136] (**) intel(0): SwapBuffers wait enabled
[ 43.136] (==) intel(0): video overlay key set to 0x101fe
[ 43.136] (II) intel(0): Output LVDS1 using monitor section Monitor0
[ 43.136] (**) intel(0): Option "Enable" "true"
[ 43.136] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 43.196] (II) intel(0): Output VGA1 has no monitor section
[ 43.196] (II) intel(0): EDID for output LVDS1
[ 43.196] (II) intel(0): Manufacturer: BOE Model: 58e Serial#: 0
[ 43.196] (II) intel(0): Year: 2010 Week: 1
[ 43.196] (II) intel(0): EDID Version: 1.4
[ 43.196] (II) intel(0): Digital Display Input
[ 43.196] (II) intel(0): Undefined color depth
[ 43.196] (II) intel(0): Digital interface is undefined
[ 43.196] (II) intel(0): Max Image Size [cm]: horiz.: 31 vert.: 17
[ 43.196] (II) intel(0): Gamma: 2.20
[ 43.196] (II) intel(0): No DPMS capabilities specified
[ 43.196] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 43.196] (II) intel(0): First detailed timing is preferred mode
[ 43.196] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 43.196] (II) intel(0): redX: 0.574 redY: 0.335 greenX: 0.335 greenY: 0.585
[ 43.196] (II) intel(0): blueX: 0.154 blueY: 0.119 whiteX: 0.312 whiteY: 0.328
[ 43.196] (II) intel(0): Manufacturer's mask: 0
[ 43.196] (II) intel(0): Supported detailed timing:
[ 43.196] (II) intel(0): clock: 72.3 MHz Image Size: 309 x 173 mm
[ 43.196] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1526 h_border: 0
[ 43.196] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 790 v_border: 0
[ 43.196] (II) intel(0): Supported detailed timing:
[ 43.196] (II) intel(0): clock: 72.3 MHz Image Size: 309 x 173 mm
[ 43.196] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1526 h_border: 0
[ 43.196] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 790 v_border: 0
[ 43.196] (II) intel(0): KFDV9HT14101
[ 43.196] (II) intel(0): Unknown vendor-specific block 0
[ 43.196] (II) intel(0): EDID (in hex):
[ 43.196] (II) intel(0): 00ffffffffffff0009e58e0500000000
[ 43.196] (II) intel(0): 01140104801f11780a3fa09355559527
[ 43.196] (II) intel(0): 1e505400000001010101010101010101
[ 43.196] (II) intel(0): 010101010101411c56a0500016303020
[ 43.196] (II) intel(0): 360035ad1000001a411c56a050001630
[ 43.196] (II) intel(0): 3020360035ad1000001a000000fe004b
[ 43.196] (II) intel(0): 46445639814854313431303100000000
[ 43.196] (II) intel(0): 00004101940100000001010a20200000
[ 43.196] (II) intel(0): EDID vendor "BOE", prod id 1422
[ 43.196] (II) intel(0): Printing DDC gathered Modelines:
[ 43.196] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 43.196] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 43.196] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 43.196] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 43.196] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 43.196] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 43.196] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 43.196] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 43.196] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 43.196] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 43.196] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 43.196] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 43.196] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 43.196] (II) intel(0): Printing probed modes for output LVDS1
[ 43.196] (II) intel(0): Modeline "1366x768"x60.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 43.196] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 43.196] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 43.196] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 43.196] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 43.255] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
[ 43.255] (II) intel(0): EDID for output VGA1
[ 43.255] (II) intel(0): Manufacturer: PHL Model: c02d Serial#: 9740
[ 43.255] (II) intel(0): Year: 2009 Week: 35
[ 43.255] (II) intel(0): EDID Version: 1.3
[ 43.255] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 43.255] (II) intel(0): Sync: Separate
[ 43.255] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 43.255] (II) intel(0): Gamma: 2.20
[ 43.255] (II) intel(0): DPMS capabilities: Off; RGB/Color Display
[ 43.255] (II) intel(0): First detailed timing is preferred mode
[ 43.255] (II) intel(0): redX: 0.635 redY: 0.335 greenX: 0.281 greenY: 0.597
[ 43.255] (II) intel(0): blueX: 0.153 blueY: 0.085 whiteX: 0.312 whiteY: 0.328
[ 43.255] (II) intel(0): Supported established timings:
[ 43.255] (II) intel(0): 720x400@70Hz
[ 43.255] (II) intel(0): 640x480@60Hz
[ 43.255] (II) intel(0): 640x480@67Hz
[ 43.255] (II) intel(0): 640x480@72Hz
[ 43.255] (II) intel(0): 640x480@75Hz
[ 43.255] (II) intel(0): 800x600@56Hz
[ 43.255] (II) intel(0): 800x600@60Hz
[ 43.255] (II) intel(0): 800x600@72Hz
[ 43.255] (II) intel(0): 800x600@75Hz
[ 43.255] (II) intel(0): 832x624@75Hz
[ 43.255] (II) intel(0): 1024x768@60Hz
[ 43.255] (II) intel(0): 1024x768@70Hz
[ 43.255] (II) intel(0): 1024x768@75Hz
[ 43.255] (II) intel(0): Manufacturer's mask: 0
[ 43.255] (II) intel(0): Supported standard timings:
[ 43.255] (II) intel(0): #0: hsize: 640 vsize 400 refresh: 70 vid: 2609
[ 43.255] (II) intel(0): #1: hsize: 1024 vsize 768 refresh: 72 vid: 19553
[ 43.255] (II) intel(0): Supported detailed timing:
[ 43.255] (II) intel(0): clock: 85.8 MHz Image Size: 344 x 194 mm
[ 43.255] (II) intel(0): h_active: 1366 h_sync: 1436 h_sync_end 1579 h_blank_end 1792 h_border: 0
[ 43.255] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 774 v_blanking: 798 v_border: 0
[ 43.255] (II) intel(0): Serial No: AU50935009740
[ 43.255] (II) intel(0): Monitor name: Philips 160E
[ 43.255] (II) intel(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 60 kHz, PixClock max 86 MHz
[ 43.255] (II) intel(0): EDID (in hex):
[ 43.255] (II) intel(0): 00ffffffffffff00410c2dc00c260000
[ 43.255] (II) intel(0): 23130103682213782ab370a255489827
[ 43.255] (II) intel(0): 155054bfee00310a614c010101010101
[ 43.255] (II) intel(0): 0101010101017f2156aa51001e30468f
[ 43.255] (II) intel(0): 330058c21000001e000000ff00415535
[ 43.255] (II) intel(0): 30393335303039373430000000fc0050
[ 43.255] (II) intel(0): 68696c69707320313630450a000000fd
[ 43.255] (II) intel(0): 00384c1e3c08000a20202020202000c0
[ 43.255] (II) intel(0): Printing probed modes for output VGA1
[ 43.255] (II) intel(0): Modeline "1366x768"x60.0 85.75 1366 1436 1579 1792 768 771 774 798 +hsync +vsync (47.9 kHz)
[ 43.255] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
[ 43.255] (II) intel(0): Modeline "1024x768"x72.0 78.44 1024 1080 1192 1360 768 769 772 801 -hsync +vsync (57.7 kHz)
[ 43.255] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 43.255] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 43.255] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 43.255] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 43.255] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 43.255] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 43.255] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 43.255] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
[ 43.255] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 43.255] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 43.255] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 43.255] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 43.255] (II) intel(0): Output LVDS1 enabled by config file
[ 43.255] (II) intel(0): Output VGA1 connected
[ 43.255] (II) intel(0): Using exact sizes for initial modes
[ 43.255] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 43.255] (II) intel(0): Output VGA1 using initial mode 1366x768
[ 43.255] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 43.255] (II) intel(0): Kernel page flipping support detected, enabling
[ 43.255] (**) intel(0): Display dimensions: (310, 170) mm
[ 43.255] (**) intel(0): DPI set to (111, 114)
[ 43.255] (II) Loading sub module "fb"
[ 43.255] (II) LoadModule: "fb"
[ 43.255] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 43.277] (II) Module fb: vendor="X.Org Foundation"
[ 43.277] compiled for 1.11.2, module version = 1.0.0
[ 43.277] ABI class: X.Org ANSI C Emulation, version 0.4
[ 43.277] (II) Loading sub module "dri2"
[ 43.277] (II) LoadModule: "dri2"
[ 43.277] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 43.277] (II) Module dri2: vendor="X.Org Foundation"
[ 43.277] compiled for 1.11.2, module version = 1.2.0
[ 43.277] ABI class: X.Org Server Extension, version 6.0
[ 43.277] (==) Depth 24 pixmap format is 32 bpp
[ 43.277] (II) intel(0): [DRI2] Setup complete
[ 43.277] (II) intel(0): [DRI2] DRI driver: i965
[ 43.277] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 43.339] (II) UXA(0): Driver registered support for the following operations:
[ 43.339] (II) solid
[ 43.339] (II) copy
[ 43.339] (II) composite (RENDER acceleration)
[ 43.339] (II) put_image
[ 43.339] (II) get_image
[ 43.339] (==) intel(0): Backing store disabled
[ 43.339] (==) intel(0): Silken mouse enabled
[ 43.339] (II) intel(0): Initializing HW Cursor
[ 43.456] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 43.466] (==) intel(0): DPMS enabled
[ 43.466] (==) intel(0): Intel XvMC decoder enabled
[ 43.466] (II) intel(0): Set up textured video
[ 43.466] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 43.466] (II) intel(0): direct rendering: DRI2 Enabled
[ 43.466] (WW) intel(0): Option "Enable" is not used
[ 43.466] (WW) intel(0): Option "TwinView" is not used
[ 43.466] (==) intel(0): hotplug detection: "enabled"
[ 43.466] (--) RandR disabled
[ 43.466] (II) Initializing built-in extension Generic Event Extension
[ 43.466] (II) Initializing built-in extension SHAPE
[ 43.466] (II) Initializing built-in extension MIT-SHM
[ 43.466] (II) Initializing built-in extension XInputExtension
[ 43.466] (II) Initializing built-in extension XTEST
[ 43.466] (II) Initializing built-in extension BIG-REQUESTS
[ 43.466] (II) Initializing built-in extension SYNC
[ 43.466] (II) Initializing built-in extension XKEYBOARD
[ 43.466] (II) Initializing built-in extension XC-MISC
[ 43.466] (II) Initializing built-in extension SECURITY
[ 43.466] (II) Initializing built-in extension XINERAMA
[ 43.466] (II) Initializing built-in extension XFIXES
[ 43.466] (II) Initializing built-in extension RENDER
[ 43.466] (II) Initializing built-in extension RANDR
[ 43.466] (II) Initializing built-in extension COMPOSITE
[ 43.466] (II) Initializing built-in extension DAMAGE
[ 43.605] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 43.605] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 43.605] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 43.605] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 43.605] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 43.605] (II) AIGLX: Loaded and initialized i965
[ 43.605] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 43.605] (II) intel(0): Setting screen physical size to 361 x 203
[ 43.909] (II) config/udev: Adding input device Power Button (/dev/input/event7)
[ 43.910] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 43.910] (II) LoadModule: "evdev"
[ 43.910] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.910] (II) Module evdev: vendor="X.Org Foundation"
[ 43.910] compiled for 1.10.99.902, module version = 2.6.0
[ 43.910] Module class: X.Org XInput Driver
[ 43.910] ABI class: X.Org XInput driver, version 13.0
[ 43.910] (II) Using input driver 'evdev' for 'Power Button'
[ 43.910] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.911] (**) Power Button: always reports core events
[ 43.911] (**) Power Button: Device: "/dev/input/event7"
[ 43.911] (--) Power Button: Found keys
[ 43.911] (II) Power Button: Configuring as keyboard
[ 43.911] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event7"
[ 43.911] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 43.911] (**) Option "xkb_rules" "evdev"
[ 43.911] (**) Option "xkb_model" "evdev"
[ 43.911] (**) Option "xkb_layout" "us"
[ 43.931] (II) config/udev: Adding input device Video Bus (/dev/input/event15)
[ 43.931] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 43.931] (II) Using input driver 'evdev' for 'Video Bus'
[ 43.931] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.931] (**) Video Bus: always reports core events
[ 43.931] (**) Video Bus: Device: "/dev/input/event15"
[ 43.931] (--) Video Bus: Found keys
[ 43.931] (II) Video Bus: Configuring as keyboard
[ 43.931] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input15/event15"
[ 43.931] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 43.931] (**) Option "xkb_rules" "evdev"
[ 43.931] (**) Option "xkb_model" "evdev"
[ 43.931] (**) Option "xkb_layout" "us"
[ 43.932] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 43.932] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 43.932] (II) Using input driver 'evdev' for 'Power Button'
[ 43.932] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.932] (**) Power Button: always reports core events
[ 43.932] (**) Power Button: Device: "/dev/input/event4"
[ 43.932] (--) Power Button: Found keys
[ 43.932] (II) Power Button: Configuring as keyboard
[ 43.932] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
[ 43.932] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 43.932] (**) Option "xkb_rules" "evdev"
[ 43.932] (**) Option "xkb_model" "evdev"
[ 43.932] (**) Option "xkb_layout" "us"
[ 43.932] (II) config/udev: Adding input device Lid Switch (/dev/input/event5)
[ 43.932] (II) No input driver/identifier specified (ignoring)
[ 43.932] (II) config/udev: Adding input device Sleep Button (/dev/input/event6)
[ 43.932] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 43.932] (II) Using input driver 'evdev' for 'Sleep Button'
[ 43.932] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.932] (**) Sleep Button: always reports core events
[ 43.932] (**) Sleep Button: Device: "/dev/input/event6"
[ 43.932] (--) Sleep Button: Found keys
[ 43.932] (II) Sleep Button: Configuring as keyboard
[ 43.932] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6/event6"
[ 43.932] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 43.933] (**) Option "xkb_rules" "evdev"
[ 43.933] (**) Option "xkb_model" "evdev"
[ 43.933] (**) Option "xkb_layout" "us"
[ 43.933] (II) config/udev: Adding input device HID 413c:8161 (/dev/input/event2)
[ 43.933] (**) HID 413c:8161: Applying InputClass "evdev keyboard catchall"
[ 43.933] (II) Using input driver 'evdev' for 'HID 413c:8161'
[ 43.933] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.933] (**) HID 413c:8161: always reports core events
[ 43.933] (**) HID 413c:8161: Device: "/dev/input/event2"
[ 43.933] (--) HID 413c:8161: Found keys
[ 43.933] (II) HID 413c:8161: Configuring as keyboard
[ 43.933] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/input/input2/event2"
[ 43.933] (II) XINPUT: Adding extended input device "HID 413c:8161" (type: KEYBOARD, id 10)
[ 43.933] (**) Option "xkb_rules" "evdev"
[ 43.933] (**) Option "xkb_model" "evdev"
[ 43.933] (**) Option "xkb_layout" "us"
[ 43.934] (II) config/udev: Adding input device HID 413c:8162 (/dev/input/event3)
[ 43.934] (**) HID 413c:8162: Applying InputClass "evdev pointer catchall"
[ 43.934] (II) Using input driver 'evdev' for 'HID 413c:8162'
[ 43.934] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.934] (**) HID 413c:8162: always reports core events
[ 43.934] (**) HID 413c:8162: Device: "/dev/input/event3"
[ 43.934] (--) HID 413c:8162: Found 3 mouse buttons
[ 43.934] (--) HID 413c:8162: Found relative axes
[ 43.934] (--) HID 413c:8162: Found x and y relative axes
[ 43.934] (II) HID 413c:8162: Configuring as mouse
[ 43.934] (**) HID 413c:8162: YAxisMapping: buttons 4 and 5
[ 43.934] (**) HID 413c:8162: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 43.934] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.0/input/input3/event3"
[ 43.934] (II) XINPUT: Adding extended input device "HID 413c:8162" (type: MOUSE, id 11)
[ 43.934] (II) HID 413c:8162: initialized for relative axes.
[ 43.934] (**) HID 413c:8162: (accel) keeping acceleration scheme 1
[ 43.934] (**) HID 413c:8162: (accel) acceleration profile 0
[ 43.934] (**) HID 413c:8162: (accel) acceleration factor: 2.000
[ 43.934] (**) HID 413c:8162: (accel) acceleration threshold: 4
[ 43.934] (II) config/udev: Adding input device HID 413c:8162 (/dev/input/mouse1)
[ 43.934] (II) No input driver/identifier specified (ignoring)
[ 43.934] (II) config/udev: Adding input device Laptop_Integrated_Webcam_0.3M (/dev/input/event10)
[ 43.934] (**) Laptop_Integrated_Webcam_0.3M: Applying InputClass "evdev keyboard catchall"
[ 43.934] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_0.3M'
[ 43.934] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.934] (**) Laptop_Integrated_Webcam_0.3M: always reports core events
[ 43.934] (**) Laptop_Integrated_Webcam_0.3M: Device: "/dev/input/event10"
[ 43.934] (--) Laptop_Integrated_Webcam_0.3M: Found keys
[ 43.934] (II) Laptop_Integrated_Webcam_0.3M: Configuring as keyboard
[ 43.934] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10/event10"
[ 43.934] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_0.3M" (type: KEYBOARD, id 12)
[ 43.934] (**) Option "xkb_rules" "evdev"
[ 43.934] (**) Option "xkb_model" "evdev"
[ 43.934] (**) Option "xkb_layout" "us"
[ 43.935] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)
[ 43.935] (II) No input driver/identifier specified (ignoring)
[ 43.935] (II) config/udev: Adding input device HDA Intel Mic at Ext Right Jack (/dev/input/event12)
[ 43.935] (II) No input driver/identifier specified (ignoring)
[ 43.935] (II) config/udev: Adding input device HDA Intel HP Out at Ext Right Jack (/dev/input/event13)
[ 43.935] (II) No input driver/identifier specified (ignoring)
[ 43.935] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event1)
[ 43.935] (**) USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[ 43.935] (II) Using input driver 'evdev' for ' USB OPTICAL MOUSE'
[ 43.935] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.936] (**) USB OPTICAL MOUSE: always reports core events
[ 43.936] (**) USB OPTICAL MOUSE: Device: "/dev/input/event1"
[ 43.936] (--) USB OPTICAL MOUSE: Found 3 mouse buttons
[ 43.936] (--) USB OPTICAL MOUSE: Found scroll wheel(s)
[ 43.936] (--) USB OPTICAL MOUSE: Found relative axes
[ 43.936] (--) USB OPTICAL MOUSE: Found x and y relative axes
[ 43.936] (II) USB OPTICAL MOUSE: Configuring as mouse
[ 43.936] (II) USB OPTICAL MOUSE: Adding scrollwheel support
[ 43.936] (**) USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[ 43.936] (**) USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 43.936] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input1/event1"
[ 43.936] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MOUSE, id 13)
[ 43.936] (II) USB OPTICAL MOUSE: initialized for relative axes.
[ 43.936] (**) USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[ 43.936] (**) USB OPTICAL MOUSE: (accel) acceleration profile 0
[ 43.936] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[ 43.936] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[ 43.936] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse0)
[ 43.936] (II) No input driver/identifier specified (ignoring)
[ 43.936] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 43.936] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 43.936] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 43.936] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.936] (**) AT Translated Set 2 keyboard: always reports core events
[ 43.936] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 43.936] (--) AT Translated Set 2 keyboard: Found keys
[ 43.936] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 43.936] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 43.936] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 43.936] (**) Option "xkb_rules" "evdev"
[ 43.936] (**) Option "xkb_model" "evdev"
[ 43.936] (**) Option "xkb_layout" "us"
[ 43.937] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event14)
[ 43.937] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
[ 43.937] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
[ 43.937] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.937] (**) PS/2 Generic Mouse: always reports core events
[ 43.937] (**) PS/2 Generic Mouse: Device: "/dev/input/event14"
[ 43.937] (--) PS/2 Generic Mouse: Found 3 mouse buttons
[ 43.937] (--) PS/2 Generic Mouse: Found relative axes
[ 43.937] (--) PS/2 Generic Mouse: Found x and y relative axes
[ 43.937] (II) PS/2 Generic Mouse: Configuring as mouse
[ 43.937] (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
[ 43.937] (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 43.937] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input14/event14"
[ 43.937] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 15)
[ 43.937] (II) PS/2 Generic Mouse: initialized for relative axes.
[ 43.937] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
[ 43.937] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
[ 43.937] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[ 43.937] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[ 43.937] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse2)
[ 43.937] (II) No input driver/identifier specified (ignoring)
[ 43.937] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 43.937] (II) No input driver/identifier specified (ignoring)
[ 43.938] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event9)
[ 43.938] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 43.938] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[ 43.938] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.938] (**) Dell WMI hotkeys: always reports core events
[ 43.938] (**) Dell WMI hotkeys: Device: "/dev/input/event9"
[ 43.938] (--) Dell WMI hotkeys: Found keys
[ 43.938] (II) Dell WMI hotkeys: Configuring as keyboard
[ 43.938] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event9"
[ 43.938] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 16)
[ 43.938] (**) Option "xkb_rules" "evdev"
[ 43.938] (**) Option "xkb_model" "evdev"
[ 43.938] (**) Option "xkb_layout" "us"
[ 48.392] (II) intel(0): EDID vendor "BOE", prod id 1422
[ 48.392] (II) intel(0): Printing DDC gathered Modelines:
[ 48.392] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 48.456] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
[ 48.457] (II) intel(0): EDID vendor "BOE", prod id 1422
[ 48.457] (II) intel(0): Printing DDC gathered Modelines:
[ 48.457] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 48.517] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
[ 49.976] (II) intel(0): EDID vendor "BOE", prod id 1422
[ 49.976] (II) intel(0): Printing DDC gathered Modelines:
[ 49.976] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 50.035] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
[ 213.440] (II) config/udev: removing device USB OPTICAL MOUSE
[ 213.440] (II) USB OPTICAL MOUSE: Close
[ 213.440] (II) UnloadModule: "evdev"
[ 213.440] (II) Unloading evdev
[ 213.728] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event1)
[ 213.728] (**) USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[ 213.728] (II) Using input driver 'evdev' for ' USB OPTICAL MOUSE'
[ 213.728] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 213.728] (**) USB OPTICAL MOUSE: always reports core events
[ 213.728] (**) USB OPTICAL MOUSE: Device: "/dev/input/event1"
[ 213.728] (--) USB OPTICAL MOUSE: Found 3 mouse buttons
[ 213.728] (--) USB OPTICAL MOUSE: Found scroll wheel(s)
[ 213.728] (--) USB OPTICAL MOUSE: Found relative axes
[ 213.728] (--) USB OPTICAL MOUSE: Found x and y relative axes
[ 213.728] (II) USB OPTICAL MOUSE: Configuring as mouse
[ 213.728] (II) USB OPTICAL MOUSE: Adding scrollwheel support
[ 213.728] (**) USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[ 213.728] (**) USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 213.728] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input16/event1"
[ 213.728] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MOUSE, id 13)
[ 213.728] (II) USB OPTICAL MOUSE: initialized for relative axes.
[ 213.728] (**) USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[ 213.728] (**) USB OPTICAL MOUSE: (accel) acceleration profile 0
[ 213.728] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[ 213.728] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[ 213.730] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse0)
[ 213.730] (II) No input driver/identifier specified (ignoring)
[ 1627.253] (II) intel(0): EDID vendor "BOE", prod id 1422
[ 1627.253] (II) intel(0): Printing DDC gathered Modelines:
[ 1627.253] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 1627.311] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
[ 1644.964] (II) intel(0): EDID vendor "BOE", prod id 1422
[ 1644.964] (II) intel(0): Printing DDC gathered Modelines:
[ 1644.964] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 1645.027] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
[ 1645.042] (II) intel(0): Allocated new frame buffer 2752x768 stride 11264, tiled
[ 1645.230] (II) intel(0): EDID vendor "BOE", prod id 1422
[ 1645.230] (II) intel(0): Printing DDC gathered Modelines:
[ 1645.230] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 1645.289] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
[ 1645.307] (II) intel(0): EDID vendor "BOE", prod id 1422
[ 1645.307] (II) intel(0): Printing DDC gathered Modelines:
[ 1645.307] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 1645.365] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
[ 1645.387] (II) intel(0): EDID vendor "BOE", prod id 1422
[ 1645.387] (II) intel(0): Printing DDC gathered Modelines:
[ 1645.387] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 1645.446] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
[ 1645.447] (II) intel(0): EDID vendor "BOE", prod id 1422
[ 1645.447] (II) intel(0): Printing DDC gathered Modelines:
[ 1645.447] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 1645.505] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
[ 2335.972] (II) intel(0): EDID vendor "BOE", prod id 1422
[ 2335.972] (II) intel(0): Printing DDC gathered Modelines:
[ 2335.972] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 2336.030] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
lspci output
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05)
00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05)
00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 05)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
12:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)
13:00.0 Ethernet controller: Atheros Communications AR8152 v2.0 Fast Ethernet (rev c1)
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)

No one? I have the exact same problem. MSI x360 laptop, intel onboard graphics. I too use xrandr. I've seen elsewhere that windows users have solved this by turning off GPU overclocking. Maybe this can point us in the right direction?

Satellite L50-B-1P1 - external display is not working

I have just bought a satellite L50-B-1P1. When I tried to connect the RGB (VGA) port to a TV ( as a external monitor), the display screen of the laptop became smaller and the right part of the whole picture was missing, even when the external monitor was not switched on.
The laptop screen has left and right display a black background. The picture is located in the middle. Is this supposed to be normal or something is wrong with this laptop?
All answers are welcomed

As I understood the message, you have enabled the external display output and could see the picture on the TV.
The question is; what resolution the TV supported and what external output option did you choose?
The point is that you can switch to the external display choosing the option; extended desktop, clone display or you can switch off the internal display and show the picture only on external monitor TV.
In case you have cloned the display, both displays (internal + external) has to use the same resolution! In case the TV would support lower resolution, the internal notebook screen would lower the resolution too!
I would recommend you to read the user manual it provides some basic notebook knowledge

Which imacs and apple displays connect to late 2008 aluminum macbook 13 inch for use as external display?

I have a late 2008 13 inch aluminum macbook and want to purchase an iMac computer or apple display to use as an external display for it while I'm at my desk.
I can afford up to $700 for sure, maybe up to $1000 and would like one that has built in camera and audio if possible.
I'd like to know what my options are as it seems not all are compatible.
I'll mostly be doing web browsing and photo editing in Aperture.
Also wondering if it's possible to sync 2 computers so that when you make changes on one it reflects the changes in the other. Like you can with certain apps like Evernote.
Thank you for your help!
Cybrena

Yes he is right, Snow Leopard is your first step. Once you have that you can upgrade directly to Mountain Lion if memory serves me correct. Some people were saying that Lion was a little sluggish with the aluminum MacBook but that Mountain Lion was great. Personally I had Lion on it also and didn't think it ran badly. 10.6 was still with Rosetta (the program that ran power pc apps) but this is dropped on 10.7 and up. Up until just the other day I still had the stock 2 gb of ram. The firmware update happens with Snow Leopard and up so it should come up as a software update. If not, it can be done manually as well. The ram I purchased was 60 bucks for the 8 gb. For Lion and Mountain Lion I have to agree with the above reply, that it would run alot better with at least 4 gb. If you run that many apps at once then you are going to want as much ram as you can get. If you add a solid state drive you will be amazed at the difference it will make too.

External display too blueish

Similar Messages

Maybe you are looking for