External display TV flickering
I am using my tv as a external display. im running it from my iMac mini display port to a hdmi converter. the screen is flickering about every 10 secs. any ideas?
It could be a simple fix, like what happened to me.
I realized that by having my iPhone too close to the computer caused my 2nd monitor to flicker.
As it turns out, the iPhone internal OS is constantly sending out signals, checking for updates, location changes, all kinds of stuff… even when it is OFF.
Other electronic devices being too close could also be the cause like radios, neon lights or even the flickering christmas tree lights on the house next door ?
Try to swap cables with alternates if possible, try a different TV ?
There are tons of posts here with flickering iMacs even just up-graders to Mavericks.
Good luck, and let us know if you find out anything.
Similar Messages
-
External Display Flickers (Intel on board)
Hi,
I have recently made a fresh installation of Arch Linux and trying to setup it for my work environment. I made a basic installation of xfce4 with slim login manager. I wanted to hook my laptop with an external display. I used xrandr to extend my laptop display with the external display. Everything worked fine but my external display flickers insanely bad. I cannot stare at it for > 30s. I dual boot on windows, so I tested the same setup with windows and it worked just fine, out of the box. I even used one of my friend's laptop who's running ubuntu and has the same h/w. It worked out of the box. I have spent more than 8 hours trying to find out where the issue would be and miserably failed. Below are certain logs and output that might help traingulate my issue.
Its a Dell Inspiron N4030, with Intel onboard graphics. I have the xf86-video-intel driver installed and the display works perfectly fine with laptops default display.
Output of xrandr -q
[joker@lucifer ~]$ xrandr -q
Screen 0: minimum 320 x 200, current 2732 x 768, maximum 8192 x 8192
LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 309mm x 173mm
1366x768 60.0*+
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
VGA1 connected 1366x768+1366+0 (normal left inverted right x axis y axis) 344mm x 194mm
1366x768 60.0*+
1024x768 75.1 72.0 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 72.8 75.0 66.7 60.0
720x400 70.1
/var/log/Xorg.0.log
[ 42.854]
X.Org X Server 1.11.2
Release Date: 2011-11-04
[ 42.854] X Protocol Version 11, Revision 0
[ 42.854] Build Operating System: Linux 3.1.0-3-ARCH x86_64
[ 42.854] Current Operating System: Linux lucifer 3.1.0-4-ARCH #1 SMP PREEMPT Mon Nov 7 22:47:18 CET 2011 x86_64
[ 42.854] Kernel command line: root=/dev/sda5 ro
[ 42.854] Build Date: 07 November 2011 07:53:00AM
[ 42.854]
[ 42.854] Current version of pixman: 0.24.0
[ 42.854] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 42.854] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 42.855] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 10 17:07:34 2011
[ 42.901] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 42.927] (==) ServerLayout "DualSreen"
[ 42.927] (**) |-->Screen "Screen0" (0)
[ 42.927] (**) | |-->Monitor "Monitor0"
[ 42.945] (**) | |-->Device "Device0"
[ 42.945] (**) |-->Screen "Screen1" (1)
[ 42.945] (**) | |-->Monitor "Monitor1"
[ 42.945] (**) | |-->Device "Device1"
[ 42.945] (**) Option "Xinerama" "1"
[ 42.945] (==) Automatically adding devices
[ 42.945] (==) Automatically enabling devices
[ 42.945] (**) Xinerama: enabled
[ 43.004] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 43.004] Entry deleted from font path.
[ 43.004] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 43.004] Entry deleted from font path.
[ 43.005] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 43.005] Entry deleted from font path.
[ 43.005] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 43.005] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 43.005] Entry deleted from font path.
[ 43.005] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 43.005] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 43.005] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 43.005] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 43.005] (II) Loader magic: 0x7ccae0
[ 43.005] (II) Module ABI versions:
[ 43.005] X.Org ANSI C Emulation: 0.4
[ 43.005] X.Org Video Driver: 11.0
[ 43.005] X.Org XInput driver : 13.0
[ 43.005] X.Org Server Extension : 6.0
[ 43.006] (--) PCI:*(0:0:2:0) 8086:0046:1028:0466 rev 2, Mem @ 0xfac00000/4194304, 0xc0000000/268435456, I/O @ 0x0000f080/8
[ 43.006] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 43.006] (II) LoadModule: "extmod"
[ 43.027] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 43.043] (II) Module extmod: vendor="X.Org Foundation"
[ 43.043] compiled for 1.11.2, module version = 1.0.0
[ 43.043] Module class: X.Org Server Extension
[ 43.043] ABI class: X.Org Server Extension, version 6.0
[ 43.043] (II) Loading extension MIT-SCREEN-SAVER
[ 43.043] (II) Loading extension XFree86-VidModeExtension
[ 43.043] (II) Loading extension XFree86-DGA
[ 43.043] (II) Loading extension DPMS
[ 43.043] (II) Loading extension XVideo
[ 43.043] (II) Loading extension XVideo-MotionCompensation
[ 43.043] (II) Loading extension X-Resource
[ 43.044] (II) LoadModule: "dbe"
[ 43.044] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 43.045] (II) Module dbe: vendor="X.Org Foundation"
[ 43.045] compiled for 1.11.2, module version = 1.0.0
[ 43.045] Module class: X.Org Server Extension
[ 43.045] ABI class: X.Org Server Extension, version 6.0
[ 43.045] (II) Loading extension DOUBLE-BUFFER
[ 43.045] (II) LoadModule: "glx"
[ 43.045] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 43.060] (II) Module glx: vendor="X.Org Foundation"
[ 43.060] compiled for 1.11.2, module version = 1.0.0
[ 43.060] ABI class: X.Org Server Extension, version 6.0
[ 43.060] (==) AIGLX enabled
[ 43.060] (II) Loading extension GLX
[ 43.060] (II) LoadModule: "record"
[ 43.060] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 43.061] (II) Module record: vendor="X.Org Foundation"
[ 43.061] compiled for 1.11.2, module version = 1.13.0
[ 43.061] Module class: X.Org Server Extension
[ 43.061] ABI class: X.Org Server Extension, version 6.0
[ 43.061] (II) Loading extension RECORD
[ 43.061] (II) LoadModule: "dri"
[ 43.061] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 43.063] (II) Module dri: vendor="X.Org Foundation"
[ 43.063] compiled for 1.11.2, module version = 1.0.0
[ 43.063] ABI class: X.Org Server Extension, version 6.0
[ 43.063] (II) Loading extension XFree86-DRI
[ 43.063] (II) LoadModule: "dri2"
[ 43.063] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 43.064] (II) Module dri2: vendor="X.Org Foundation"
[ 43.064] compiled for 1.11.2, module version = 1.2.0
[ 43.064] ABI class: X.Org Server Extension, version 6.0
[ 43.064] (II) Loading extension DRI2
[ 43.064] (II) LoadModule: "intel"
[ 43.091] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 43.114] (II) Module intel: vendor="X.Org Foundation"
[ 43.114] compiled for 1.10.99.902, module version = 2.16.0
[ 43.114] Module class: X.Org Video Driver
[ 43.114] ABI class: X.Org Video Driver, version 11.0
[ 43.114] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 43.114] (++) using VT number 7
[ 43.134] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 43.135] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 43.135] Requested Entity already in use!
[ 43.135] (EE) Screen 1 deleted because of no matching config section.
[ 43.135] (II) UnloadModule: "intel"
[ 43.136] (II) Unloading intel
[ 43.136] drmOpenDevice: node name is /dev/dri/card0
[ 43.136] drmOpenDevice: open result is 8, (OK)
[ 43.136] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 43.136] drmOpenDevice: node name is /dev/dri/card0
[ 43.136] drmOpenDevice: open result is 8, (OK)
[ 43.136] drmOpenByBusid: drmOpenMinor returns 8
[ 43.136] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 43.136] (**) intel(0): Depth 24, (--) framebuffer bpp 32
[ 43.136] (==) intel(0): RGB weight 888
[ 43.136] (==) intel(0): Default visual is TrueColor
[ 43.136] (II) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale
[ 43.136] (--) intel(0): Chipset: "Arrandale"
[ 43.136] (**) intel(0): Relaxed fencing enabled
[ 43.136] (**) intel(0): Wait on SwapBuffers? enabled
[ 43.136] (**) intel(0): Triple buffering? enabled
[ 43.136] (**) intel(0): Framebuffer tiled
[ 43.136] (**) intel(0): Pixmaps tiled
[ 43.136] (**) intel(0): 3D buffers tiled
[ 43.136] (**) intel(0): SwapBuffers wait enabled
[ 43.136] (==) intel(0): video overlay key set to 0x101fe
[ 43.136] (II) intel(0): Output LVDS1 using monitor section Monitor0
[ 43.136] (**) intel(0): Option "Enable" "true"
[ 43.136] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 43.196] (II) intel(0): Output VGA1 has no monitor section
[ 43.196] (II) intel(0): EDID for output LVDS1
[ 43.196] (II) intel(0): Manufacturer: BOE Model: 58e Serial#: 0
[ 43.196] (II) intel(0): Year: 2010 Week: 1
[ 43.196] (II) intel(0): EDID Version: 1.4
[ 43.196] (II) intel(0): Digital Display Input
[ 43.196] (II) intel(0): Undefined color depth
[ 43.196] (II) intel(0): Digital interface is undefined
[ 43.196] (II) intel(0): Max Image Size [cm]: horiz.: 31 vert.: 17
[ 43.196] (II) intel(0): Gamma: 2.20
[ 43.196] (II) intel(0): No DPMS capabilities specified
[ 43.196] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 43.196] (II) intel(0): First detailed timing is preferred mode
[ 43.196] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 43.196] (II) intel(0): redX: 0.574 redY: 0.335 greenX: 0.335 greenY: 0.585
[ 43.196] (II) intel(0): blueX: 0.154 blueY: 0.119 whiteX: 0.312 whiteY: 0.328
[ 43.196] (II) intel(0): Manufacturer's mask: 0
[ 43.196] (II) intel(0): Supported detailed timing:
[ 43.196] (II) intel(0): clock: 72.3 MHz Image Size: 309 x 173 mm
[ 43.196] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1526 h_border: 0
[ 43.196] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 790 v_border: 0
[ 43.196] (II) intel(0): Supported detailed timing:
[ 43.196] (II) intel(0): clock: 72.3 MHz Image Size: 309 x 173 mm
[ 43.196] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1526 h_border: 0
[ 43.196] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 790 v_border: 0
[ 43.196] (II) intel(0): KFDV9HT14101
[ 43.196] (II) intel(0): Unknown vendor-specific block 0
[ 43.196] (II) intel(0): EDID (in hex):
[ 43.196] (II) intel(0): 00ffffffffffff0009e58e0500000000
[ 43.196] (II) intel(0): 01140104801f11780a3fa09355559527
[ 43.196] (II) intel(0): 1e505400000001010101010101010101
[ 43.196] (II) intel(0): 010101010101411c56a0500016303020
[ 43.196] (II) intel(0): 360035ad1000001a411c56a050001630
[ 43.196] (II) intel(0): 3020360035ad1000001a000000fe004b
[ 43.196] (II) intel(0): 46445639814854313431303100000000
[ 43.196] (II) intel(0): 00004101940100000001010a20200000
[ 43.196] (II) intel(0): EDID vendor "BOE", prod id 1422
[ 43.196] (II) intel(0): Printing DDC gathered Modelines:
[ 43.196] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 43.196] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 43.196] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 43.196] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 43.196] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 43.196] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 43.196] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 43.196] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 43.196] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 43.196] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 43.196] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 43.196] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 43.196] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 43.196] (II) intel(0): Printing probed modes for output LVDS1
[ 43.196] (II) intel(0): Modeline "1366x768"x60.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 43.196] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 43.196] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 43.196] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 43.196] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 43.255] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
[ 43.255] (II) intel(0): EDID for output VGA1
[ 43.255] (II) intel(0): Manufacturer: PHL Model: c02d Serial#: 9740
[ 43.255] (II) intel(0): Year: 2009 Week: 35
[ 43.255] (II) intel(0): EDID Version: 1.3
[ 43.255] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 43.255] (II) intel(0): Sync: Separate
[ 43.255] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 43.255] (II) intel(0): Gamma: 2.20
[ 43.255] (II) intel(0): DPMS capabilities: Off; RGB/Color Display
[ 43.255] (II) intel(0): First detailed timing is preferred mode
[ 43.255] (II) intel(0): redX: 0.635 redY: 0.335 greenX: 0.281 greenY: 0.597
[ 43.255] (II) intel(0): blueX: 0.153 blueY: 0.085 whiteX: 0.312 whiteY: 0.328
[ 43.255] (II) intel(0): Supported established timings:
[ 43.255] (II) intel(0): 720x400@70Hz
[ 43.255] (II) intel(0): 640x480@60Hz
[ 43.255] (II) intel(0): 640x480@67Hz
[ 43.255] (II) intel(0): 640x480@72Hz
[ 43.255] (II) intel(0): 640x480@75Hz
[ 43.255] (II) intel(0): 800x600@56Hz
[ 43.255] (II) intel(0): 800x600@60Hz
[ 43.255] (II) intel(0): 800x600@72Hz
[ 43.255] (II) intel(0): 800x600@75Hz
[ 43.255] (II) intel(0): 832x624@75Hz
[ 43.255] (II) intel(0): 1024x768@60Hz
[ 43.255] (II) intel(0): 1024x768@70Hz
[ 43.255] (II) intel(0): 1024x768@75Hz
[ 43.255] (II) intel(0): Manufacturer's mask: 0
[ 43.255] (II) intel(0): Supported standard timings:
[ 43.255] (II) intel(0): #0: hsize: 640 vsize 400 refresh: 70 vid: 2609
[ 43.255] (II) intel(0): #1: hsize: 1024 vsize 768 refresh: 72 vid: 19553
[ 43.255] (II) intel(0): Supported detailed timing:
[ 43.255] (II) intel(0): clock: 85.8 MHz Image Size: 344 x 194 mm
[ 43.255] (II) intel(0): h_active: 1366 h_sync: 1436 h_sync_end 1579 h_blank_end 1792 h_border: 0
[ 43.255] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 774 v_blanking: 798 v_border: 0
[ 43.255] (II) intel(0): Serial No: AU50935009740
[ 43.255] (II) intel(0): Monitor name: Philips 160E
[ 43.255] (II) intel(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 60 kHz, PixClock max 86 MHz
[ 43.255] (II) intel(0): EDID (in hex):
[ 43.255] (II) intel(0): 00ffffffffffff00410c2dc00c260000
[ 43.255] (II) intel(0): 23130103682213782ab370a255489827
[ 43.255] (II) intel(0): 155054bfee00310a614c010101010101
[ 43.255] (II) intel(0): 0101010101017f2156aa51001e30468f
[ 43.255] (II) intel(0): 330058c21000001e000000ff00415535
[ 43.255] (II) intel(0): 30393335303039373430000000fc0050
[ 43.255] (II) intel(0): 68696c69707320313630450a000000fd
[ 43.255] (II) intel(0): 00384c1e3c08000a20202020202000c0
[ 43.255] (II) intel(0): Printing probed modes for output VGA1
[ 43.255] (II) intel(0): Modeline "1366x768"x60.0 85.75 1366 1436 1579 1792 768 771 774 798 +hsync +vsync (47.9 kHz)
[ 43.255] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
[ 43.255] (II) intel(0): Modeline "1024x768"x72.0 78.44 1024 1080 1192 1360 768 769 772 801 -hsync +vsync (57.7 kHz)
[ 43.255] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 43.255] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 43.255] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 43.255] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 43.255] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 43.255] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 43.255] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 43.255] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
[ 43.255] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 43.255] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 43.255] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 43.255] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 43.255] (II) intel(0): Output LVDS1 enabled by config file
[ 43.255] (II) intel(0): Output VGA1 connected
[ 43.255] (II) intel(0): Using exact sizes for initial modes
[ 43.255] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 43.255] (II) intel(0): Output VGA1 using initial mode 1366x768
[ 43.255] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 43.255] (II) intel(0): Kernel page flipping support detected, enabling
[ 43.255] (**) intel(0): Display dimensions: (310, 170) mm
[ 43.255] (**) intel(0): DPI set to (111, 114)
[ 43.255] (II) Loading sub module "fb"
[ 43.255] (II) LoadModule: "fb"
[ 43.255] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 43.277] (II) Module fb: vendor="X.Org Foundation"
[ 43.277] compiled for 1.11.2, module version = 1.0.0
[ 43.277] ABI class: X.Org ANSI C Emulation, version 0.4
[ 43.277] (II) Loading sub module "dri2"
[ 43.277] (II) LoadModule: "dri2"
[ 43.277] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 43.277] (II) Module dri2: vendor="X.Org Foundation"
[ 43.277] compiled for 1.11.2, module version = 1.2.0
[ 43.277] ABI class: X.Org Server Extension, version 6.0
[ 43.277] (==) Depth 24 pixmap format is 32 bpp
[ 43.277] (II) intel(0): [DRI2] Setup complete
[ 43.277] (II) intel(0): [DRI2] DRI driver: i965
[ 43.277] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 43.339] (II) UXA(0): Driver registered support for the following operations:
[ 43.339] (II) solid
[ 43.339] (II) copy
[ 43.339] (II) composite (RENDER acceleration)
[ 43.339] (II) put_image
[ 43.339] (II) get_image
[ 43.339] (==) intel(0): Backing store disabled
[ 43.339] (==) intel(0): Silken mouse enabled
[ 43.339] (II) intel(0): Initializing HW Cursor
[ 43.456] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 43.466] (==) intel(0): DPMS enabled
[ 43.466] (==) intel(0): Intel XvMC decoder enabled
[ 43.466] (II) intel(0): Set up textured video
[ 43.466] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 43.466] (II) intel(0): direct rendering: DRI2 Enabled
[ 43.466] (WW) intel(0): Option "Enable" is not used
[ 43.466] (WW) intel(0): Option "TwinView" is not used
[ 43.466] (==) intel(0): hotplug detection: "enabled"
[ 43.466] (--) RandR disabled
[ 43.466] (II) Initializing built-in extension Generic Event Extension
[ 43.466] (II) Initializing built-in extension SHAPE
[ 43.466] (II) Initializing built-in extension MIT-SHM
[ 43.466] (II) Initializing built-in extension XInputExtension
[ 43.466] (II) Initializing built-in extension XTEST
[ 43.466] (II) Initializing built-in extension BIG-REQUESTS
[ 43.466] (II) Initializing built-in extension SYNC
[ 43.466] (II) Initializing built-in extension XKEYBOARD
[ 43.466] (II) Initializing built-in extension XC-MISC
[ 43.466] (II) Initializing built-in extension SECURITY
[ 43.466] (II) Initializing built-in extension XINERAMA
[ 43.466] (II) Initializing built-in extension XFIXES
[ 43.466] (II) Initializing built-in extension RENDER
[ 43.466] (II) Initializing built-in extension RANDR
[ 43.466] (II) Initializing built-in extension COMPOSITE
[ 43.466] (II) Initializing built-in extension DAMAGE
[ 43.605] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 43.605] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 43.605] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 43.605] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 43.605] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 43.605] (II) AIGLX: Loaded and initialized i965
[ 43.605] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 43.605] (II) intel(0): Setting screen physical size to 361 x 203
[ 43.909] (II) config/udev: Adding input device Power Button (/dev/input/event7)
[ 43.910] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 43.910] (II) LoadModule: "evdev"
[ 43.910] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.910] (II) Module evdev: vendor="X.Org Foundation"
[ 43.910] compiled for 1.10.99.902, module version = 2.6.0
[ 43.910] Module class: X.Org XInput Driver
[ 43.910] ABI class: X.Org XInput driver, version 13.0
[ 43.910] (II) Using input driver 'evdev' for 'Power Button'
[ 43.910] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.911] (**) Power Button: always reports core events
[ 43.911] (**) Power Button: Device: "/dev/input/event7"
[ 43.911] (--) Power Button: Found keys
[ 43.911] (II) Power Button: Configuring as keyboard
[ 43.911] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event7"
[ 43.911] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 43.911] (**) Option "xkb_rules" "evdev"
[ 43.911] (**) Option "xkb_model" "evdev"
[ 43.911] (**) Option "xkb_layout" "us"
[ 43.931] (II) config/udev: Adding input device Video Bus (/dev/input/event15)
[ 43.931] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 43.931] (II) Using input driver 'evdev' for 'Video Bus'
[ 43.931] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.931] (**) Video Bus: always reports core events
[ 43.931] (**) Video Bus: Device: "/dev/input/event15"
[ 43.931] (--) Video Bus: Found keys
[ 43.931] (II) Video Bus: Configuring as keyboard
[ 43.931] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input15/event15"
[ 43.931] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 43.931] (**) Option "xkb_rules" "evdev"
[ 43.931] (**) Option "xkb_model" "evdev"
[ 43.931] (**) Option "xkb_layout" "us"
[ 43.932] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 43.932] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 43.932] (II) Using input driver 'evdev' for 'Power Button'
[ 43.932] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.932] (**) Power Button: always reports core events
[ 43.932] (**) Power Button: Device: "/dev/input/event4"
[ 43.932] (--) Power Button: Found keys
[ 43.932] (II) Power Button: Configuring as keyboard
[ 43.932] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
[ 43.932] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 43.932] (**) Option "xkb_rules" "evdev"
[ 43.932] (**) Option "xkb_model" "evdev"
[ 43.932] (**) Option "xkb_layout" "us"
[ 43.932] (II) config/udev: Adding input device Lid Switch (/dev/input/event5)
[ 43.932] (II) No input driver/identifier specified (ignoring)
[ 43.932] (II) config/udev: Adding input device Sleep Button (/dev/input/event6)
[ 43.932] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 43.932] (II) Using input driver 'evdev' for 'Sleep Button'
[ 43.932] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.932] (**) Sleep Button: always reports core events
[ 43.932] (**) Sleep Button: Device: "/dev/input/event6"
[ 43.932] (--) Sleep Button: Found keys
[ 43.932] (II) Sleep Button: Configuring as keyboard
[ 43.932] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6/event6"
[ 43.932] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 43.933] (**) Option "xkb_rules" "evdev"
[ 43.933] (**) Option "xkb_model" "evdev"
[ 43.933] (**) Option "xkb_layout" "us"
[ 43.933] (II) config/udev: Adding input device HID 413c:8161 (/dev/input/event2)
[ 43.933] (**) HID 413c:8161: Applying InputClass "evdev keyboard catchall"
[ 43.933] (II) Using input driver 'evdev' for 'HID 413c:8161'
[ 43.933] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.933] (**) HID 413c:8161: always reports core events
[ 43.933] (**) HID 413c:8161: Device: "/dev/input/event2"
[ 43.933] (--) HID 413c:8161: Found keys
[ 43.933] (II) HID 413c:8161: Configuring as keyboard
[ 43.933] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/input/input2/event2"
[ 43.933] (II) XINPUT: Adding extended input device "HID 413c:8161" (type: KEYBOARD, id 10)
[ 43.933] (**) Option "xkb_rules" "evdev"
[ 43.933] (**) Option "xkb_model" "evdev"
[ 43.933] (**) Option "xkb_layout" "us"
[ 43.934] (II) config/udev: Adding input device HID 413c:8162 (/dev/input/event3)
[ 43.934] (**) HID 413c:8162: Applying InputClass "evdev pointer catchall"
[ 43.934] (II) Using input driver 'evdev' for 'HID 413c:8162'
[ 43.934] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.934] (**) HID 413c:8162: always reports core events
[ 43.934] (**) HID 413c:8162: Device: "/dev/input/event3"
[ 43.934] (--) HID 413c:8162: Found 3 mouse buttons
[ 43.934] (--) HID 413c:8162: Found relative axes
[ 43.934] (--) HID 413c:8162: Found x and y relative axes
[ 43.934] (II) HID 413c:8162: Configuring as mouse
[ 43.934] (**) HID 413c:8162: YAxisMapping: buttons 4 and 5
[ 43.934] (**) HID 413c:8162: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 43.934] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.0/input/input3/event3"
[ 43.934] (II) XINPUT: Adding extended input device "HID 413c:8162" (type: MOUSE, id 11)
[ 43.934] (II) HID 413c:8162: initialized for relative axes.
[ 43.934] (**) HID 413c:8162: (accel) keeping acceleration scheme 1
[ 43.934] (**) HID 413c:8162: (accel) acceleration profile 0
[ 43.934] (**) HID 413c:8162: (accel) acceleration factor: 2.000
[ 43.934] (**) HID 413c:8162: (accel) acceleration threshold: 4
[ 43.934] (II) config/udev: Adding input device HID 413c:8162 (/dev/input/mouse1)
[ 43.934] (II) No input driver/identifier specified (ignoring)
[ 43.934] (II) config/udev: Adding input device Laptop_Integrated_Webcam_0.3M (/dev/input/event10)
[ 43.934] (**) Laptop_Integrated_Webcam_0.3M: Applying InputClass "evdev keyboard catchall"
[ 43.934] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_0.3M'
[ 43.934] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.934] (**) Laptop_Integrated_Webcam_0.3M: always reports core events
[ 43.934] (**) Laptop_Integrated_Webcam_0.3M: Device: "/dev/input/event10"
[ 43.934] (--) Laptop_Integrated_Webcam_0.3M: Found keys
[ 43.934] (II) Laptop_Integrated_Webcam_0.3M: Configuring as keyboard
[ 43.934] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10/event10"
[ 43.934] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_0.3M" (type: KEYBOARD, id 12)
[ 43.934] (**) Option "xkb_rules" "evdev"
[ 43.934] (**) Option "xkb_model" "evdev"
[ 43.934] (**) Option "xkb_layout" "us"
[ 43.935] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)
[ 43.935] (II) No input driver/identifier specified (ignoring)
[ 43.935] (II) config/udev: Adding input device HDA Intel Mic at Ext Right Jack (/dev/input/event12)
[ 43.935] (II) No input driver/identifier specified (ignoring)
[ 43.935] (II) config/udev: Adding input device HDA Intel HP Out at Ext Right Jack (/dev/input/event13)
[ 43.935] (II) No input driver/identifier specified (ignoring)
[ 43.935] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event1)
[ 43.935] (**) USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[ 43.935] (II) Using input driver 'evdev' for ' USB OPTICAL MOUSE'
[ 43.935] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.936] (**) USB OPTICAL MOUSE: always reports core events
[ 43.936] (**) USB OPTICAL MOUSE: Device: "/dev/input/event1"
[ 43.936] (--) USB OPTICAL MOUSE: Found 3 mouse buttons
[ 43.936] (--) USB OPTICAL MOUSE: Found scroll wheel(s)
[ 43.936] (--) USB OPTICAL MOUSE: Found relative axes
[ 43.936] (--) USB OPTICAL MOUSE: Found x and y relative axes
[ 43.936] (II) USB OPTICAL MOUSE: Configuring as mouse
[ 43.936] (II) USB OPTICAL MOUSE: Adding scrollwheel support
[ 43.936] (**) USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[ 43.936] (**) USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 43.936] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input1/event1"
[ 43.936] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MOUSE, id 13)
[ 43.936] (II) USB OPTICAL MOUSE: initialized for relative axes.
[ 43.936] (**) USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[ 43.936] (**) USB OPTICAL MOUSE: (accel) acceleration profile 0
[ 43.936] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[ 43.936] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[ 43.936] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse0)
[ 43.936] (II) No input driver/identifier specified (ignoring)
[ 43.936] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 43.936] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 43.936] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 43.936] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.936] (**) AT Translated Set 2 keyboard: always reports core events
[ 43.936] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 43.936] (--) AT Translated Set 2 keyboard: Found keys
[ 43.936] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 43.936] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 43.936] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 43.936] (**) Option "xkb_rules" "evdev"
[ 43.936] (**) Option "xkb_model" "evdev"
[ 43.936] (**) Option "xkb_layout" "us"
[ 43.937] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event14)
[ 43.937] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
[ 43.937] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
[ 43.937] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.937] (**) PS/2 Generic Mouse: always reports core events
[ 43.937] (**) PS/2 Generic Mouse: Device: "/dev/input/event14"
[ 43.937] (--) PS/2 Generic Mouse: Found 3 mouse buttons
[ 43.937] (--) PS/2 Generic Mouse: Found relative axes
[ 43.937] (--) PS/2 Generic Mouse: Found x and y relative axes
[ 43.937] (II) PS/2 Generic Mouse: Configuring as mouse
[ 43.937] (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
[ 43.937] (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 43.937] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input14/event14"
[ 43.937] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 15)
[ 43.937] (II) PS/2 Generic Mouse: initialized for relative axes.
[ 43.937] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
[ 43.937] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
[ 43.937] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[ 43.937] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[ 43.937] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse2)
[ 43.937] (II) No input driver/identifier specified (ignoring)
[ 43.937] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 43.937] (II) No input driver/identifier specified (ignoring)
[ 43.938] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event9)
[ 43.938] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 43.938] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[ 43.938] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.938] (**) Dell WMI hotkeys: always reports core events
[ 43.938] (**) Dell WMI hotkeys: Device: "/dev/input/event9"
[ 43.938] (--) Dell WMI hotkeys: Found keys
[ 43.938] (II) Dell WMI hotkeys: Configuring as keyboard
[ 43.938] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event9"
[ 43.938] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 16)
[ 43.938] (**) Option "xkb_rules" "evdev"
[ 43.938] (**) Option "xkb_model" "evdev"
[ 43.938] (**) Option "xkb_layout" "us"
[ 48.392] (II) intel(0): EDID vendor "BOE", prod id 1422
[ 48.392] (II) intel(0): Printing DDC gathered Modelines:
[ 48.392] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 48.456] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
[ 48.457] (II) intel(0): EDID vendor "BOE", prod id 1422
[ 48.457] (II) intel(0): Printing DDC gathered Modelines:
[ 48.457] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 48.517] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
[ 49.976] (II) intel(0): EDID vendor "BOE", prod id 1422
[ 49.976] (II) intel(0): Printing DDC gathered Modelines:
[ 49.976] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 50.035] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
[ 213.440] (II) config/udev: removing device USB OPTICAL MOUSE
[ 213.440] (II) USB OPTICAL MOUSE: Close
[ 213.440] (II) UnloadModule: "evdev"
[ 213.440] (II) Unloading evdev
[ 213.728] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event1)
[ 213.728] (**) USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[ 213.728] (II) Using input driver 'evdev' for ' USB OPTICAL MOUSE'
[ 213.728] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 213.728] (**) USB OPTICAL MOUSE: always reports core events
[ 213.728] (**) USB OPTICAL MOUSE: Device: "/dev/input/event1"
[ 213.728] (--) USB OPTICAL MOUSE: Found 3 mouse buttons
[ 213.728] (--) USB OPTICAL MOUSE: Found scroll wheel(s)
[ 213.728] (--) USB OPTICAL MOUSE: Found relative axes
[ 213.728] (--) USB OPTICAL MOUSE: Found x and y relative axes
[ 213.728] (II) USB OPTICAL MOUSE: Configuring as mouse
[ 213.728] (II) USB OPTICAL MOUSE: Adding scrollwheel support
[ 213.728] (**) USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[ 213.728] (**) USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 213.728] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input16/event1"
[ 213.728] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MOUSE, id 13)
[ 213.728] (II) USB OPTICAL MOUSE: initialized for relative axes.
[ 213.728] (**) USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[ 213.728] (**) USB OPTICAL MOUSE: (accel) acceleration profile 0
[ 213.728] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[ 213.728] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[ 213.730] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse0)
[ 213.730] (II) No input driver/identifier specified (ignoring)
[ 1627.253] (II) intel(0): EDID vendor "BOE", prod id 1422
[ 1627.253] (II) intel(0): Printing DDC gathered Modelines:
[ 1627.253] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 1627.311] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
[ 1644.964] (II) intel(0): EDID vendor "BOE", prod id 1422
[ 1644.964] (II) intel(0): Printing DDC gathered Modelines:
[ 1644.964] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 1645.027] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
[ 1645.042] (II) intel(0): Allocated new frame buffer 2752x768 stride 11264, tiled
[ 1645.230] (II) intel(0): EDID vendor "BOE", prod id 1422
[ 1645.230] (II) intel(0): Printing DDC gathered Modelines:
[ 1645.230] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 1645.289] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
[ 1645.307] (II) intel(0): EDID vendor "BOE", prod id 1422
[ 1645.307] (II) intel(0): Printing DDC gathered Modelines:
[ 1645.307] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 1645.365] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
[ 1645.387] (II) intel(0): EDID vendor "BOE", prod id 1422
[ 1645.387] (II) intel(0): Printing DDC gathered Modelines:
[ 1645.387] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 1645.446] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
[ 1645.447] (II) intel(0): EDID vendor "BOE", prod id 1422
[ 1645.447] (II) intel(0): Printing DDC gathered Modelines:
[ 1645.447] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 1645.505] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
[ 2335.972] (II) intel(0): EDID vendor "BOE", prod id 1422
[ 2335.972] (II) intel(0): Printing DDC gathered Modelines:
[ 2335.972] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 2336.030] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
lspci output
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05)
00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05)
00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 05)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
12:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)
13:00.0 Ethernet controller: Atheros Communications AR8152 v2.0 Fast Ethernet (rev c1)
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)No one? I have the exact same problem. MSI x360 laptop, intel onboard graphics. I too use xrandr. I've seen elsewhere that windows users have solved this by turning off GPU overclocking. Maybe this can point us in the right direction?
-
External Display Flickering/Blanking out on Windows 8.1 Boot Camp
OK, so I have a MBP 15" Mid-2012 model running the latest versions of Mavericks and all software and drivers on Windows are up-to-date. I am using my external display through an Active HDMI adapter for Mini DisplayPort/Thunderbolt (one that broadcasts audio as well as video).
So, this adapter and image seems to work perfectly fine on the Mac side, however, when I flip the switch to Windows 8.1, the external display goes haywire and goes blank and flickers with occasional lines and static across the screen. Image comes back every few seconds and then will suddenly lose signal.
I've been reading around the internet and I've seen that this could be a hardware issue in that Intel never put support for Thunderbolt/Mini DisplayPort on their chipsets for Windows, not a driver issue.
How screwed am I? If not so screwed, what steps do I need to take to attain functionality of the external display while running Windows 8.1 through Boot Camp?
Note: my Mac does not come with an HDMI port already installed like current Macs. This was the last high-end Macbook Pro to have an optical drive installed on it.From Tech specs for your machine MacBook Pro (15-inch, Mid 2012) - Technical Specifications
Intel HD Graphics 4000
NVIDIA GeForce GT 650M with 512MB of GDDR5 memory (15-inch 2.3GHz configuration) or NVIDIA GeForce GT 650M with 1GB of GDDR5 memory (15-inch 2.6GHz configuration) and automatic graphics switching
Dual display and video mirroring: Simultaneously supports full native resolution on the built-in display and up to 2560 by 1600 pixels on an external display, both at millions of colors
From the Intel downloads, there is a new driver for HD4000...
https://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProdId=3712
It may be worth a test.
From Nvidia website...
http://www.nvidia.com/download/driverResults.aspx/77228/en-us
On a later rMBP, I can connect three displays via TB at full resolution.
One suggestion is to try a Display-miniDP cable, instead of a converted HDMI signal, if the monitor will accept a DP connection.
If it works correctly on the Mac side, it would be a driver issue, since the hardware supports it with one OS, but not the other. The effects you describe indicates that some pins on the HDMI are not getting correct signals to maintain image refresh rates or pixel sync. When you use the current connection, does the Control Panel -> Displays detect the model and name correctly? If not, the EDID detection is failing. -
Macbook pro 2011 early cannot find right resolution for external display and keeps flickering
I have a macbook pro 2011 early running 10.9, and a LG FLATRON W2242T external screen. Also, I have a VGA to miniport from Apple and a VGA to HDMI, plus a HDMI to miniport(from Apple). By just connect with VGA to miniport to my MBP, it just flickers few times and stops detecting. But by connect VGA to HDMI converter and HDMI to miniport to my MBP, it keeps flickering, a non-stop flickering. The external screen always shows no signal. However, if I connect my MBP to my TV through HDMI to miniport, it works fine. But connecting the VGA port to my TV, it gets the same problem. I have tried clear my PRAM many times, and it gets the same result. Does anyone have the same problem? Thanks
Macbook Pro 15" Early 2011 external display won't work as it used while Snow Leopard, I hate you Lion so far. I cannot even Go Back!
Did you bother to backup or clone your SL installation before dumping it? -
External display flickers for a fraction of a second
Hello all,
Im using a macbook pro 15 with the new invidia 8600m graphics, hooked up to a cinema hd 30 inch display at home and a HP 30 inch display at work.
At times, maybe twice an hour, my external display will flicker for a fraction of a second. I can not find a source of the problem, having tried all available graphics drivers from apple and forceware drivers from laptopvideo2go.
The problem does not seem to be related to any particular action in vista, like opening windows or applications. It just flickers at any given time, for a fraction of a second and then comes back to normal.
I have tried all available drivers. Yes, UAC is off. TMM is off, too. Yes, it does the flickering on both my cinema hd and the hp 30 at work. Yes, it is very very annoying.
Anyone else having the same problem? Any idea of what it might be?
Message was edited by: peterternstromI have but the problem is still there. Matt on this forum has the same problem. He is in Austria, so maybe there is issue with streaming ATV in 50hz countries.
Will try to connect the ATV directly to my projector instead of going through the receiver. -
Using iMac as external display from Macbook Pro flickers static and crackles.
I'm trying to use my iMac as an external display.
When I plug in my early 2011 Macbook Pro into my Mid 2010 iMac via a Belkin Mini DisplayPort to Mini DisplayPort, the iMac screen flickers with static and there's random crackling noises.
Weird thing is, when I try the same thing with a new Macbook Air, everything works perfectly!
Here's a quick video demonstrating what I'm talking about - http://youtu.be/xxTXVRffWwE
Are the two not compatible or do I just have a defective Macbook Pro? The Macbook Pro works fine with the Cinema Display I have in the office...Huh, It should work like this:
Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support
iMac Model
Cable Supported
Port on Source Computer
iMac (27-inch Late 2009)
Mini DisplayPort to Mini DisplayPort
Mini DisplayPort or Thunderbolt
Actually that table seems illogical. The cable supported is mini to mini display but the port says "or Thunderbolt"
Does that seem contradictory to you? -
Screen flickers while using external display
while using my macbook pro with an external display (my sony LCD TV). the external screen (TV) flickers. it goes black for about a second then comes on. it will happen about 20 minutes into watching TV and happens more often the longer i watch. for example i just finished watching a 40 minute video podcast it happened at the halfway point then more often - about 10 minutes later then 5 minutes later - then 2 minutes... the final minutes of the show it happened about 3 times before the end.
any help? any ideas? i suspect (though i can't prove) it has to do with the setting for the external display.
thanksCan you run memory diagnostics ? Download a pre-compiled bootable iso from http://www.memtest.org/ down the page and make a bootable CD. Boot to this CD and run RAM diagnostic for a couple of hours, maybe overnight, and see if your laptop has RAM errors.
If you have no RAM defect after the long test above, then uninstall all ATI/AMD gfx card drivers in Programs and Feature in Control Panel. Now go to Device Manager and disable your gfx card, putting a checkmark in the box Uninstall drivers for this hardware. ( Please note this operation will not harm your computer. Windows will redetect your gfx card after restart. )
Restart as required by Windows 7.
You may have to disable and then enable the gfx card in Device Manager several times until you are left with VGA drivers only. ( Computer gurus suggest using a Driver Sweeper/Driver Cleaner program. But I do the driver cleaning chore myself. You may go to C:\Windows\System32\DRIVERS folder and manually delete Atikmpag.sys, Atikmdag.sys drivers. )
Now you can re-install the ATI/AMD drivers that you have downloaded from hp suppport.
Hope this helps. -
G550: Display flickers / distorts. External display fine.
I have a weird issue with my G550 (which is out of warranty). The screen flickers and distorts (fuzzy colours around objects on the screen). If I flex the case in a certain way the problem goes away, it's hard to describe but if I apply pressure in a certain direction to the back left of the case it solves the issue... but as soon as I stop applying pressure it goes away. I'm thinking it's a loose connection somewhere between the GPU and the display, but I'm not entirely sure where to look. If I plugin in external displays they work fine, no flickering or distortion at all.
hi deicist,
Welcome to the Lenovo Community.
If the LCD screen flickers when you open or close the lid or if tilt the LCD screen on a certain angle then the problem lies on the LVDS or LCD cable (possibly got worn out by opening/closing the lid alot of times). If you're interested in fixing it, you can get spare parts here:
http://tinyurl.com/clc26jr
Disassembly Guide here - http://tinyurl.com/dydpkcf (video)
Caution: Please be careful in disassembling your PC as it may contain sensitive parts.
Hope this helps.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
External display flickers randomly
Hi, I have a mid-2011 MacBook Air with i7 4GB RAM and 256GB of SSD.
About 2 weeks ago I have decided to set up a mini workstation on my desk and soon after I bought the Dell U2412M external display (I can't afford the Thunderbolt Display!). Along with an external keyboard and mouse, I connect the Dell with the MBA using a Mini DisplayPort to DisplayPort cable. Finally I shut off the lid on the MBA to begin clamshell mode.
For 2 weeks it was uneventful, I was happy with the setup and the U2412M is awesome. Until yesterday, when I bought OS X Mountain Lion and began installing it on my MBA. Everything changed after that.
I think I should note that I did the installation in clamshell mode. During the installation, the display on the Dell started to flicker badly, and soon it blacks out for roughly 3 seconds, before coming back to life. The flickering and blackouts continued throughout the installation process.
Now that Mountain Lion is installed nicely on my MBA, the screen still flickers and blacks out frequently. In fact, while writing this post the screen blacked out 4 times.
I need help on this. Is there anyone kind enough to provide some advice or solution?
Thanks!Jimmy,
It seems like your problem is similar to or the same as the one being discussed over in this thread. There doesn’t seem to be an answer yet, but you may want to follow the thread I linked since it seems to have some more discussion! -
Right side of my LCD flickers, but not when connected to external display
The right side of my display flickers lines and inverted colors, but when it is connected to a display (with mirroring) there is no flicker. I have reset PRAM and SMC. Macbook Pro Mid 2012 2.3 GHz A1398.
I should note that when connected to an external display there is no flickering on either display.
-
I purchased my Macbook (17") through a certified apple tecnition in August 2012, it was refurbished and the motherboard was completely replaced. I do a lot of photo editing, but I have been unable to do so because of the red vibrating lines that interrupt my screen. The issue disappears temporarily when I tap on the computer, and the problem does not occur when I use external display or try to screen capture the problem. I brought the computer back to the technition I purchased it from and he said that it was a problem with my fan, so I have two new fans but the issue is still occuring. He says he doesnt know whats wrong. Does anyone have any information on this issue?
Here is an image of the issue
http://www.flickr.com/photos/67839707@N08/8884847081/I recommend having your Mac serviced by someone competent. A force sufficient to "blow apart" the fans was clearly excessive and may have damaged the display cable, as well as any number of other problems.
Dust is properly cleaned with a vacuum, preferably one designed for computer service, and they are not cheap.
Compressed air should never be used. It just blows dust everywhere, often into places where it can no longer be removed. -
My Macbook Pro (Mid-2012) won't connect to an external display using my MiniDP to VGA Cable.
I'm on a Macbook Pro (Mid-2012) on Mac OS X 10.8.3 (currently downloading the update to 8.4). When I plug in my Mini Displayport to VGA adapter to my Mac, the screen flickers blue for a second and the Display Settings window detects the other monitor and allows me to rearrange the screen, but it does not project anything onto the other monitor. However, I tried connecting an Apple Thunderbolt Monitor to this computer today, and it worked. This wasn't a problem before, as I was able to connect this Mac to other LCD projects before. Furthermore, I don't think it's an issue with the adapter either because it's relatively new. I also tried plugging in the adapter of another Mac (which was working fine) into my Mac, but it didn't work either.
Here's what I've tried:
1. Restarting the computer with everything plugged in
2. Pressing Command + F1 when it's plugged
Any advice would be helpful!Hi lancekatigbak,
If you're having issues with the display out on your MacBook Pro, you may want to take a look at the troubleshooting steps in the following article:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Cheers,
- Brenden -
Hey I have a mid-2010 macbook pro
I have been wanting to connect my dell moniter to my lap top as an external display. I bought a Mini Displayport to VGA converter and the whole nine yards. But whenever I try to connect the MD to VGA adapter to my laptop, nothing happens. My external monitor just goes to power saver mode and does nothing. The only thing that happens is that my laptop screen flickers every once in a while when the adapter is connected to it. Can anyone help me figure this out?
ThanksI've just bought a LG L1900R monitor[1] which i am
plugging in via mini-DVI to VGA adaptor. The monitor
is native DVI, coming with DVI -> VGA adaptor.
What comes to my mind, though, is: since the monitor
is native DVI, maybe Apple's mini-DVI to VGA adaptor
is making the monitor belive the connection is DVI to
DVI?
that was it. mini-DVI to DVI worked fine. -
External display flashes and shows 'snow'. (Video of behaviour included)
Since yesterday, my Macbook Pro is acting strange. When I connect it to an external monitor, it usually works. Everything goes well for 10 to 30 minutes, and at some point the display starts tearing, showing snow, and flashing. These flashes get worse and worse, up till the point where I have to reboot. Rebooting seems to help a little. Whenever the laptop hasn't been used for a few minutes it works correctly again, for a short while. (This makes me conclude it's some sort of heat-related issue)
The issue is present on multiple monitors using different DVI cables. I only have one mini-displayport to dvi adapter, so the problem could be there too.
This problem does not affect the internal display of the macbook in any way.
Here is a short video showing the behaviour:
http://www.youtube.com/watch?v=4BotUqHb3dM
What should I do? Try to figure out wether it's the mbp or the connector or just bring it in for a repair. (It's less than a year old)I have had similar issues with my 15" MBP. Occasionally my external monitor will go 1980s and display what looks like crappy tv reception.
Also, connecting or disconnecting an external display (via the single link mini display port to dvi adapter) has a tendency to lock up the entire machine (both displays black, won't respond to keyboard or mouse) until the power is cycled.
Also, my built in monitor has a habit of flickering/glitching lines.
These problems seem to happen regardless of which graphics card is active. -
External Display not working (descriptive details in post)
Hello
Background:
I have been using a black Macbook (last year's model - before the aluminum ones came out) and connecting it to a VIZIO VW22L HDTV10T (television/monitor) via a mini-DVI to VGA adapter.
This setup always worked, although it was a bit finicky (I'd have to plug it in before closing the display to get in to work in clamshell mode, for example). I get the feeling from reading other forum posts that this is the normal case, though (which so far has been my only real gripe with OS X).
Anyway, back a couple months ago I wondered if this finicky-ness was partially caused by a messed-up preference file, so I decided to try and fix this. In the ensuing tweaking, I somehow caused my Display preferences to disappear.
After much effort trying to fix the problem, I eventually called Apple support, which ultimately recommended that I reinstall OS X. I didn't do that, and continued to work at the problem. I eventually was able to bring it back by going into my Time Machine backups and restoring all the Display preference files (I used old preferences from back when I got the external HD, so I knew they'd be "uncorrupted). However, now I'm having problems with my external display, namely that it is not working.
This problem started early this year, so it might have been caused by the 10.5.5 update, but since I had all these other problems going on, I'm not sure if that was the case.
Problem:
The Macbook doesn't seem to recognize the display, or is having problems routing video to the display, or something.
If I plug the display into the Macbook while it is running normally, the Macbook LCD will flash blue (like it picked up a new display), but them come back to normal. The monitor will go out of sleep mode for a second, but then display a "No signal" message. If I attempt to "Detect Displays" the Macbook screen will either flash blue (as before) or just do nothing.
If I have the display plugged in when I start up the Macbook, everything will proceed as normal until the time the desktop would be displayed. Instead of this, I just see a blue screen (like some generic desktop before any background is applied). The menu bar, the dock, and icons do not show up. However, I can hear various audio cues telling me the computer is running fine except for htis problem (email notifier going off, etc.).
I know the problem is not faulty hardware, because when I boot my Macbook into Windows, everything works perfectly. It therefore follows that it is an OS X problem. I downloaded both Cocktail and Applejack and run various repairs on them (most notable repairing preferences), but nothing has changed.
Any suggestions about how to try fixing this? If there's any technical detail I've missed, let me know.
Thank you in advance to everyone who tries to help.
-RichardI have same problem. MacBook Pro (new, 2014) upgraded to Yosemite. Had been running with ViewPoint high-resolution, 27" monitor, HDMI. I tried Thunderbolt connection -- it connected, but it would not allow the external monitor to run at its native resolution (2560x1440). It would only display properly using HDMI. Just 3 days ago after I installed the latest OSx software update, and my external monitor problems started. On startup, my MacBook screen flickers non-stop. I can fix problem eventually (after several tries) by disconnecting the HDMI cable, turning OFF the external monitor power, turning external monitor back ON and then plugging in the HDMI to my MacBook Pro. This is very inconvenient.
I will try using the Thunderbolt cable. When I tried it in the past, it connected, but it wouldn't display the native resolution of my external monitor (which is 2560x1440). Can only get this resolution now with HDMI.
Maybe you are looking for
-
Line Graph Issue - In BIP values are summed for same date
Hi I have below data Date-----------------------Sell 27-Mar-13----------------10 28-Mar-13----------------15 28-Mar-13----------------20 30-Mar-13----------------25 There are two entries on 28-Mar-2013. On BIP line graph; Sell values are added and gr
-
How do i get imessage to go to an email address?
How do I get an imessage to go to an email address on an iphone 4s?
-
Cant get into Dreamweaver forum Help !
How do I get on the dreamweaver forum? All I get is login page over and over and over and over Cant login to ask the question how to get in Same login as here It even fills out my login for me and nothing happens How to get help?
-
It's not letting me update my apps how can I sort it
Am having problems updating my apps and it keeps on coming up about me billing information and keeps saying it declined all of the time what can I do ? To sort the problem out ?
-
Could I get opinions on my site made on iweb 08 ?
http://TheChillism.com as you can see I use the HTML coding for the flash games. The templet is of the new iweb 08. I add new pictures and games every 2 days. So what you think of my site ?