External DNS Nightmare - Site is Down - Please Help!

Can't figure this out, I did everything as the help file stated.
The site is completely down as of now.
domain:
www.elitemmagym.com
A records created at registrar for:
www.elitemmagym.com
elitemmagy.com
IP pointed on both to 192.150.2.140 (north america)
see screenshot:
http://cl.ly/2X2z1r430H3S0T430z2a
Then setup domain in BC admin, chose external DNS:
http://cl.ly/0e0W2m2r322d350m191x
It's been over an hour.
The site was completely down within seconds of making these changes. It was up and functioning on the old server before this.
Pinging and tracerouting the domain name shows that no record exists:
http://cl.ly/010A0K3P0p0W2F3I2j0K
HELP!

Is support off on Friday nights?

Similar Messages

After a few minutes on safari it freezes everything i can't even force quit i have to shut off by holding the power button down please help me with this. thanks

everything freezes i can't even force quit i have to shut off by holding the power button down please help me with this. thanks

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

When I try to create pdf from scanner, Acrobat shuts down, please help!!

When I try to create pdf from scanner, Acrobat shuts down, please help!!

Hi miketayber,
We would love to help, but need to know a bit more to get to the root of the problem. Please tell us:
What version of Acrobat are you using
What operating system you're on
Whether you've been able to scan previously
What you're scanning to (do you have the latest drivers?)
Is there an error message or number associated with the crash?
We look forward to hearing back from you.
Best,
Sara

PPP and virtual-access2 is down, please help

Dear All,
Since yesterday we have problems with our Cisco 878 SDSL router/modem. We make use of a standard script from our ISP (KPN.com). When we have uploaded the script by Windows Terminal, the router is unable to establish a ppp connection with our ISP. Virtual-access2 link is up, but the protocol is down.
Please find underneath the standard script from KPN.com. Please help we have already lost 1 day with "trial and error" and the service and support is not that great from our ISP.
Thanks in advance for your reply.
Cheers.
FYI
version 12.4
no service pad
service timestamps debug datetime localtime
service timestamps log datetime localtime
service password-encryption
no service udp-small-servers
no service tcp-small-servers
no service dhcp
hostname IDSL-ADV-Cust-CPE-SDSL
logging rate-limit console 10 except errors
boot-start-marker
boot-end-marker
ip subnet-zero
ip cef
no ip dhcp-client network-discovery
ip dhcp pool IAS
import all
origin ipcp
ip name-server 194.151.228.18
ip name-server 194.151.228.34
controller DSL 0
mode atm
line-term cpe
line-mode auto
dsl-mode shdsl symmetric annex B
interface BRI0
no ip address
encapsulation hdlc
shutdown
interface ATM0
no ip address
no shutdown
no atm ilmi-keepalive
interface ATM0.1 point-to-point
description To IAS over ADSL Access Router
pvc 2/32
encapsulation aal5mux ppp dialer
dialer pool-member 1
interface FastEthernet0
interface FastEthernet1
interface FastEthernet2
interface FastEthernet3
interface Vlan1
ip address pool IAS
ip verify unicast reverse-path
no shutdown
no cdp enable
hold-queue 32 in
interface Dialer0
ip address negotiated
ip verify unicast reverse-path
encapsulation ppp
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication chap callin
ppp chap hostname KPN
ppp chap password xx
ppp pap sent-username kpn password xxx
ppp ipcp dns request
ppp ipcp mask request
ppp ipcp address accept
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer0
no ip http server
no ip http secure-server
control-plane
scheduler max-task-time 5000
end

Hi,
beside that the proposed config has no NAT, it appears fine. Can you send output of "show dsl interface" and "show atm PVC 2/35".

HP Pavilion G6 (G6-2313AX) automatically stops music when I put the laptop lid down, please help?

Hi,
My Laptop is a Pavilion G6-2313AX (AMD A10-4600M with 7660G+7670M Dual Graphics) with genuine Windows 8. I use this laptop a lot in the school bus, while going in cars etc to listen to music. Problem is whenever I put my laptop screen down (It is set NOT to go to sleep mode), the track pauses on Windows Media Player, iTunes, any program. Someone please help me on what I should do to prevent this from happening!

I understand that the music pauses when the notebook is closed. When the notebook is closed, this is usually to move it from one place to another. This may be triggering HP ProtectSmart which physically stops the HDD from spinning causing everything to pause until the HDD is stable. Newser systems are more sensitive to protect the HDD and the data on it.
This sounds like it's more in relation to ProtectSmart more so than a power plan. Review this thread as it looks similar to your issue. Disabling HP ProtectSmart is what fixed it for them.
Let me know if this answered your question.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

I cannot connect BB 8520 with external GPS Holux via Bluetooth. Please Help!

I've bought a M1200 HOLUX gps and I'm trying to sincronize it with a Blackberry Curve 8520. The problem is:
- BB finds correctly M1200 via bluetooth, and sincronizes well with the the PIN
- M1200 Holux appears in bold just a few seconds after sincronization.
- But then, M1200 appears only in plain text (not bold) as it's not connected. In the BB options, it doesn't appear the option "Connect" as with the rest of bluetooth devices.
I've tried several times but always happen the same. M1200 is not able to keep the bt connection.
Could you please help me?
Thanks in advance

http://supportforums.blackberry.com/t5/Java-Development/External-GPS/m-p/535845

ITunes is a nightmare... PLEASE HELP!!!

Ever since I downloaded the 5.0.1.4. version my nightmare started. When I tried to open iTunes I got a message that read:
iTunes has encountered a problem and needs to close. We are sorry for the inconvenience.
Errors report contains the following:
Error signature
AppName: itunes.exe
AppVer: 5.0.1.4.
ModName: unknown
ModVer: 0.0.0.0.
Offset: 10001040
After several times, finally I was able to uninstalled the iTunes and the Quicktime. Then I tried to use the CD and install an older version. After installation I encountered the following message:
Quicktime failed to initialize Error -#2095
Now, I cannot use itunes nor download more music into my iPod.
Please HELP!!!
Thanks

b noir...
I uninstalled QT and iTunes but I cannot delete the iPod and itunes folders...
This is the message that I get when I try to delete the iPod folder:
"Error Deleting File or Folder.
Cannot delete iPodService.exe. It is being used by another person or program.
Close any programs that may be using the file and try again".
This when I try to delete the iTunes folder:
"Error Deleting File or Folder.
Cannot delete iTunesHelper.exe.
Make sure the disk is not full or write-protected and that the file is not currently in use".
What should I do now?

Help needed on Host Named Site Collection creation --- please help

Hi Friends,
Question 1
Can we create Host Named Site Collection following the pattern below?
We will have three Department head Host Named Site Collections, names –
HRHead.ourdomain.com
MarkettingHead.ourdomain.com
AdminHead.ourdomain.com
Under each of these department head sites, there will be 3 or 4 Host Named Site Collections. The site structure will be like:
HRHead.ourdomain.com
n
HR1.ourdomain.com
n
HR2.ourdomain.com
n
HR3.ourdomain.com
MarkettingHead.ourdomain.com
n
MarkettingProduct1.ourdomain.com
n
MarkettingProduct2.ourdomain.com
AdminHead.ourdomain.com
n
AdminCountry1.ourdomain.com
n
AdminCountry2.ourdomain.com
n
AdminCountry3.ourdomain.com
Question 2
If we want to use common template (like header, footer, company icons) for inner sites (e.g. AdminCountry1.ourdomain.com, AdminCountry2.ourdomain.com, AdminCountry3.ourdomain.com) how to create that template for Host Named Site Collection? If these were
sub sites, we can take help of site templates. But these are Host Named Site Collections, how to use common design for Host Named Site Collection?
Any hint from you will be really helpful. Thanks for your comments.

Yes you should be able to create a site collection using a custom template. Here's a BLOG on how to create a site collection with a custom template in 2010. It should still work the same way.
http://www.toddklindt.com/blog/Lists/Posts/Post.aspx?ID=218
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

My Firefox has lost the "go back to the previous site" arrow. PLEASE HELP

My Mozilla Firefox browser has lost the "back arrow" in the toolbar.
I have no way to go back to the previous website I visited.
PLEASE HELP.
THANKS

If the menu bar is hidden then press the F10 key or hold down the Alt key, that should make the menu bar appear.
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
* If items are missing then open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout" (Linux, Windows)
* If a missing item is in the toolbar palette then drag it back from the Customize window on the toolbar
* If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up.
See also:
* http://kb.mozillazine.org/Toolbar_customization
* https://support.mozilla.com/kb/Back+and+forward+or+other+toolbar+items+are+missing

My site is screwed - please help...

Hi there,
I started receiving a huge amount of spam all of a sudden in my inbox via my 'Contact' form on my site, so I decided to add Captcha functionality to the Contact widget form, plus a little re-design aswell.
After reuploading (both fully and only modified files) direct from Muse via BC, my site looks like this:
http://httpgregheinimanncom.businesscatalyst.com/
ratehr than this in my preview window
Can someone please help? I'm a graphic designer using this program purely because of it's ease, any help would be greatly appreciated
Thanks,
Greg

Hello Greg,
You site looks like this on my end: http://screencast.com/t/O86i93oUiYw
It seems to be alright and matches the screenshot of the "Preview Mode" you've provided above. Can you try clearing the cache, try multiple browsers etc. to see if that resolves the issue?
Hope this helps.
Cheers
Parikshit

Can you add a rescue email to an existing account? Because i need help resetting my security questions,ive called up the account security team, and it is doesnt solve my problem. I dont remember Any answers and i have money just sitting there. Please help

also my ipod is a Nano 5th Generation....so when the account security person asks for ipod serial number..its completely useless because the serial codes only work for Ipod Touch and Iphones.
- Serial Code from Ipod= USELESS..
- Answer at least one of your security questions= I can't...and the whole reason im having this issue..
- Have a rescue email= trying to see if i can get one.
This issue is Reaaaallly starting to annoy me, so someone please help Thankss! xo

Welcome to the Apple Community.
Start here, and reset your security questions, you will receive an email to your rescue address, use the link in the email and reset your security questions.
If that doesn't help or you don't have a rescue address, you might try contacting Apple through iTunes Store Support

Print to vide/External video not working in FCP, PLEASE HELP

I have the FCP HD 4.5 and am having difficulty communicating to my Panasonic PV-800. Capture is great, but when trying to view external video or print to video, the default blue screen of my cameras vtr mode is distorted and no video comes through. I have refreshed AV devices and have check all frames in the external video menus. When i pause the playback, the still frame appears on my camera, then if i resume playback, the video does not come through, but only distorts the blue screen. I made sure the settings were correct and even found an apple site that told me to copy two plugins from the FCP CD, and i did that. I also did the quicktime fix where u delete the reciepts and download the latest version of Quicktime, still same videoless situation.
I feel like i've tried everything. Please if anyone can help, i gotta get something printed to video soon!

after doing everything it was:
Shutdown everything, power up connected camera, power up external drive, power up computer, launch fcp, and it worked. I dunno if the restart was a part of the process of one of my other things that i did or whatever. Maybe that's just how my computer reacts. Anyways, hope that helps anyone frustrated.

External hard drive won't install, Please Help

I just purchased this same external hard drive, 3/7/2011. I hooked everything up via my USB, put in the installation CD, got the Drive Set-up window, clicked on Backup Software and got a message "C:\DOCUMEN~1\Owner\LOCALS~1\Temp\pft48F~tmp\" and "Access denied" with the only choice of clicking on "OK"; when I clicked on OK, a small window titled "unpacking backup software" appears in the upper left corner; it got about halfway through, stopped and I got an alert from my McAfee security program that it detected a trojan and removed it. Then 3 gauges appear in the upper left corner and the message "Toshiba Backup Software Installation an error occurred during the move data process of the file REFILERW.SYS!" appears and I click OK again then the Toshiba Drive Setup window appears and a green checkmark is NOT next to Backup Software. However, if I go ahead and click on the other 2 items to install, Drive Monitor Software and Power Save Software, a green checkmark appears next to them. When I then click Exit I get my regular startup screen. The Drive Monitor appears in My Programs but nothing else. Did Toshiba send me a trojan on their program?
When I checked out my McAfee to see what the name of the trojan was,it says: Artemis!8CBE6FC5C432
I'm not a technophobe and am just lost; I don't know what to do or where to get answers. I emailed Toshiba Tech Support twice but didn't get anything back.
Please, can someone out there help me?

It would be a false positive. Some antivirus programs look for virus like activity, and that makes them much more prone to errors.
Get rid of McAfee's and switch to Microsoft Security Essentials, it is free and very good. Security essentials is a very light program, so you will not notice any slow downs when it is running like the bloatware security programs are known for and you will have far fewer false positives.
http://www.microsoft.com/security_essentials/
When I used to manage a PC repair shop, we used to have people come in and pay us to get rid of McAfee's and Nortons on their systems because they would slow the computers down so much, and the false positives were making them miserable when trying to install programs that they knew were safe.
Welcome to the Toshiba user forums.
For those of you who do not know what a user forum is, it is a community of users who volunteer time to help other users. Anyone can participate. It's 100% voluntary.
Being super active is never a requirement

[URGENT!!!] DNS won't resolve. PLEASE HELP!!! [DESPERATE]

guys,
i googled, read the DNS & BIND book (very useful), but still haven't solved my problem and this is killing me as i have spent days and the darn thing simply refuses to work!!! i am desperate and need your help.
i am trying to set up a DNS server on my dual NIC x86 Solaris 10.
1. i am getting confused with naming interfaces. i seem cannot have two network ifaces named like m1.example.com. each one must have its own unique name, right? [pls advise here]
so i name them m1.example.com and m2.example.com respectively. m1 is for router and m2 is for switch (LAN).
m1.example.com - 10.0.0.2
m2.example.com - 192.168.16.1
2. secondly I cannot get the SOA record. what interface should be used as SOA?? i tried m1 as it is "primary" (iprb0) and connects to the internet. however, it didn't work.
i even tried m3.example.com trying to combine two interfaces as below (still won't work):
my db files (excerps, server is down, writing from home) :
DB.EXAMPLE.COM
$TTL 3h
@ IN SOA m3.example.com. admin.example.com. ( 1 3h 1h 1w 1h)
IN NS m3.example.com.
localhost IN A 127.0.0.1
m1.example.com IN A 10.0.0.2
m2.example.com IN A 192.168.16.1
example.com IN MX 10 m3.example.com
m3 IN A 10.0.0.2
IN A 192.168.16.1
DB.10.0.0$TTL 3h
@ IN SOA m3.example.com. admin.example.com. ( 1 3h 1h 1w 1h)
IN NS m3.example.com.
1 IN PTR m3.example.com
DB.192.168.16$TTL 3h
@ IN SOA m3.example.com. admin.example.com. ( 1 3h 1h 1w 1h)
IN NS m3.example.com.
2 IN PTR m3.example.com
DB.127.0.0$TTL 3h
@ IN SOA m3.example.com. admin.example.com. ( 1 3h 1h 1w 1h)
IN NS m3.example.com.
1 IN PTR localhost.the previuous incarnation of the files contained m1 instead of m3 as SOA and NS, but like i mentioned already, it didn't work either.
i am able to ping router 10.0.0.1, but can't surf.
when i nslookup m3.example.com it gives:
Server: 127.0.0.1
Address: 127.0.0.1#53
Name: m3.example.com
Address: 10.0.0.2
Name: m3.example.com
Address: 192.168.16.1and if i nslookup m1.example.com and m2.example.com it gives proper addresses (10.0.0.2 and 192.168.16.1 respectively).
DNS is running and files don't return errors after named-checkzone.
the idea is to make DNS server work for local network (192.168.16/24) and install postfix on top. however i am stuck with DNS at the moment.
please, anybody point me in the right direction - need to get this working by tomorrow!!!!!
many thanks for your replies.

Whats your named.conf look like? Also, google DNS forwarder/forwarding....
Tom de

Flash Drop Downs - Please Help!

THANKS in advance for the help you can provide.
I am attempting to build a flash drop down navigation bar and I followed the Tutvid video tutorial on YouTube, which launched successfully - it looks wonderful!
However, when I wanted to add additional drop down menus for other buttons, the video has a big gap in information for the beginner (me).
To speak the same language, the video is at this address: http://www.youtube.com/watch?v=LC7BaZCForE
Action Script sequences to scroll to are the following:
1. Movie where drop downs are created on timeline with action script: 29:13
2. Action Script content for Hit Area: 29.52
3. Root Layer action script: 32:33
I assumed that I should be adding my additional menu drop downs on the same timeline window as the first. I added new layers for the menus and frames, but I thought I should write the action script for the new menus on the same action script layer as the first. I added action script 10 frames from the first menu, so the next grouping began at frame 20 and ended at frame 30.
Adding the second menu (I want more but stopped when I tested) resulted in the two menus alternately blinking on and off so a repeating movie kicks in and no "over" and "out" functions for the menu are recognized.
I'll now paste in my code for corresponding segments from his video so maybe you can show me where I need to change my coding to make it all work. Apparently my function definition needs to change, but I have no clue what that means or how it needs to be different. Before I paste, however, let me share the error that pops up:
Location: Symbol 'mcDropDowns', Layer AS MugCup', Frame 20, Line 4
Description: 1021: Duplicate function definition.
Okay, here's my coding:
1.
Frame 1
stop();
clicker_mc.visible = false;
2.
Frame 10
stop ();
mugFrame_btn.addEventListener(MouseEvent.MOUSE_OVER, goBackF);
function goBackF(event:MouseEvent):void{
gotoAndStop(1);
Frame 20
stop ();
tableFrame_btn.addEventListener(MouseEvent.MOUSE_OVER, goBackF);
function goBackF(event:MouseEvent):void{
gotoAndStop(1);
3.
var navBtnGlow:GlowFilter = new GlowFilter(0x425616, 0.75, 0, 15, 1, 2, true, false);
navBar_mc.addEventListener(MouseEvent.MOUSE_OVER, navOverF);
navBar_mc.addEventListener(MouseEvent.MOUSE_OUT, navOutF);
function navOverF(event:MouseEvent):void{
event.target.filters = [navBtnGlow];
navBar_mc.setChildIndex(event.target as MovieClip, 1);
dropMenus_mc.gotoAndStop(navBar_mc.getChildAt(1).name);
trace("We are Rolled Over..." + navBar_mc.getChildAt (1).name)
function navOutF(event:MouseEvent):void{
event.target.filters = [];
navBar_mc.addEventListener(MouseEvent.MOUSE_OVER, navOverF);
navBar_mc.addEventListener(MouseEvent.MOUSE_OUT, navOutF);
Please know that I realize this will take a few moments for you to compare my code to what's on the video. Know that you will be doing me a TREMENDOUS favor by helping me to understand the theory behind replicating this step.
I look forward to hearing from you - THANKS!

Ah, no... I tested it further, and found that the script I
posted above is not causing the problem. This puts me even further
back than before... I truly have absolutely no idea what part of
the applet is malfunctioning now.
If there is any sort of list of known reasons for the flash
player to crash... actionscript or animation... I would greatly
appreciate seeing it.
Sorry if I'm failing to provide enough information about my
problem...

External DNS Nightmare - Site is Down - Please Help!

Similar Messages

Maybe you are looking for