External DNS server not replicating records to secondary after migration from 2003 to 2012

Hi
I have a query relating to 2012 Server and DNS.
Last week we de-commissioned our primary external DNS server (Windows 2003 Server) and moved the role over to a new Windows 2012 server.
Since this point replication to our secondary server (3rd party hosted) does not seem to occur and our DNS records seem to have expired on the secondary server as we cannot look these up via nslookup.
I cannot see any failures in the event log of the server; I have checked our external firewall logs and nothing is being blocked inbound/ outbound as far as I can see. And the server’s local firewall has been disabled.
The server is a standalone server in a workgroup with a standard filebased primary zone, with no AD integration and recursion disabled.
When I created the zone I copied the .dns file from the old server and selected this in the interface during the creation of the zone on the new server. The new server has the same internal and external IP as the old server and the old server is off-line.
I have also manually increased the serial number of the zone and still no joy.
One thing that I have noticed is when I open the zones properties/Name Servers and click edit on the external nameserver I get the infamous "The server with this IP address is not authoritative for the required zone" error.
Any help Would be appreciated, thanks in advance

Nice to hear that you are close in finding the problem. So in short:
You have enabled Zone transfers in DNS management console for the applicable zone
You have verified that your DNS is listening to the correct interfaces
You have enabled firewall rules to accept TCP and UDP traffic to port 53
You have checked if "BIND secondaries" option is applicable to your case
You have initiated a zone transfer from the secondary server
Lefteris Karafilis
MCSE, MCTS, SEC+
LinkedIn: http://www.linkedin.com/in/lkarafilis
Mail: [email protected]
Blog: http://www.karafilis.net

Similar Messages

DNS EventID 4015 on PDC since Domain Migration from 2003 R2 = 2012

Hi,
following problem here:
2 Domain Controllers with AD Integrated DNS Zone, migrated from 2003 R2 to 2012. One Single Root Forest.
The Primary Domain Controller shows every 2, 3 or 4 hours the DNS EventID 4015. No further error is available: (which is may emty) "".
Only on the Details pane you can find this Information:
======================================
- System
- Provider
   [ Name] Microsoft-Windows-DNS-Server-Service
   [ Guid] {71A551F5-C893-4849-886B-B5EC8502641E}
   [ EventSourceName] DNS
- EventID 4015
   [ Qualifiers] 49152
   Version 0
   Level 2
   Task 0
   Opcode 0
   Keywords 0x80000000000000
- TimeCreated
   [ SystemTime] 2013-12-10T19:48:17.000000000Z
   EventRecordID 2456
   Correlation
- Execution
   [ ProcessID] 0
   [ ThreadID] 0
======================================
The Migration was made by the following steps:
Bring Up the first 2012 MigrationDC as 3rd DC to the Domain.
Move the FSMO Roles to the 2012 MigrationDC
DHCP Data migrated with Server Migration Tools, IAS Data with iasmigrader.exe exported
DCPromo DC1 (2003 R2) and Format C:
Install a fresh 2012 Installation on old DC1 an rename it again with the original Name DC1
DHCP Data migrated with Server Migration Tools, IAS Data with iasmigrader.exe exported
DCPromo DC2 (2003 R2) and Format C:
Install a fresh 2012 Installation on old DC2 an rename it again with the original Name DC2
Move Back the FSMO Roles to DC1
DCPromo the first 2012 MigrationDC
Metadata Cleanup for MigrationDC
DCDIAG /V /C Shows no Errors, all works good, the funny Thing is, that only DC1 Shows the DNS EventId 4015 in production evironment. The only exception is, that if you reboot DC1 (i.e. for maintenance, upates etc) than the error appears on DC2. Exactly on
that time, if DC1 is temporarily not availble and DC2 is under "load". If DC1 is back again, the Event 4015 Ends on DC2 and Comes back to DC1!!!
I backupped and restored DC1 and DC2 in an lab Environment, the funny Thing is that the EventID 4015 doesnt appear in lab Environment. The difference between prod and lab is: prod is bare metal with 2 teamed nics, lab is hyper-v vm's with 2 virtual teamed
nics. same IP's etc... DNS NIC Settings are the same.
It Looks like you can only produce the error in the production lab if you have the DC under "load".
This Event was discussed here more than one time in the Forum, but the issues doesnt match 100% to my Problem. No RODC is available in my prod Environment, the EventID 4015 has no further Errors "" in the Eventlog like in other Posts.
Ace Fekays blog :" Using ADSI Edit to resolve conflicting or duplicate AD Integrated Zones" was helpful for metadata cleanup, but it could not fix the EventId 4015 away. Because we had no Problems with disappearing zones...
Maybe Enabling NTDS Verbose Logging in the registry is helpful, but i dont know for what i have to Keep an eye out?
The thread
http://social.technet.microsoft.com/Forums/windowsserver/en-US/c0d3adb4-67d2-470c-97fc-a0a364b1f854/dns-server-error-event-id-4015-after-replacing-domain-controller-with-another-using-same-name?forum=winserverDS seems to match to my Problem, but also no
soulution available...
Any ideas what causes this "ugly" Event without noticable consequences?

Zonenname
Typ
Speicher
Eigens
chaf
ten
Cache
AD-Domain
_msdcs.our-domain-name.com
Primary
AD-Forest
Secure
0.168.192.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
1.1.10.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
1.168.192.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
1.18.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
10.10.10.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
10.21.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
11.10.10.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
11.18.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
11.21.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
11.24.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
11.25.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
11.30.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
128.168.192.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
13.21.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
13.24.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
13.25.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
13.30.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
130.168.192.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
15.18.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
15.21.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
15.24.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
15.25.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
15.29.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
15.30.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
16.10.10.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
16.168.192.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
16.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
17.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
17.21.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
17.24.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
17.25.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
17.29.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
17.30.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
19.21.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
19.24.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
19.25.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
196.169.193.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
2.21.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
20.10.in-addr.arpa
Primary
AD-Domain
Secure
Rev
20.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
200.168.192.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
21.21.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
21.24.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
21.25.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
23.21.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
23.24.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
23.25.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
23.30.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
239.24.217.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
25.21.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
25.24.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
25.25.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
25.30.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
252.21.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
252.22.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
252.23.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
252.24.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
252.25.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
252.30.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
253.18.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
253.21.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
253.22.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
253.23.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
253.24.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
253.25.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
253.26.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
253.29.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
253.30.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
254.168.192.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
254.18.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
254.21.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
254.22.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
254.23.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
254.24.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
254.25.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
254.29.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
254.30.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
255.10.10.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
27.21.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
27.25.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
27.30.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
29.25.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
29.30.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
3.18.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
3.21.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
3.22.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
3.23.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
3.24.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
3.25.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
3.26.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
3.29.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
3.30.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
31.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
31.25.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
32.168.192.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
33.25.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
35.25.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
37.25.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
39.25.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
41.25.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
43.25.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
45.25.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
47.25.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
49.25.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
5.18.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
5.19.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
5.21.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
5.22.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
5.23.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
5.24.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
5.25.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
5.29.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
5.30.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
50.168.192.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
51.25.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
52.168.192.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
53.25.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
54.168.192.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
55.25.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
60.168.192.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
62.168.192.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
64.168.192.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
7.168.192.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
7.18.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
7.21.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
7.22.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
7.23.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
7.24.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
7.25.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
7.29.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
7.30.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
70.168.192.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
80.168.192.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
88.168.192.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
9.18.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
9.21.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
9.22.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
9.23.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
9.24.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
9.25.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
9.29.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
9.30.172.in-addr.arpa
Primary
AD-Domain
Secure
Rev
Aging
our-domain-name.com
Primary
AD-Domain
Secure
Agi
ng
TrustAnchors
Primary
AD-Forest

Exchange server name not changing in mail profile after migration from 2010 to 2013

Following a migration from 2010 to 2013 we are finding that for a number of users the old exchange server address stays in the mail profile (control panel -> mail -> e-mail accounts) which causes Outlook not to load.
We are able to go into control panel -> mail -> e-mail accounts and change this manually to the new exchange 2013 server address but we have quite a number of users and don't really want to do it manually.
Shouldn't it be updating automatically and if so why is it?

Hi,
Yes, it should be changed by autodiscover. Does this issue occur to all the migrated users?
I have seen this kind of issues before when migrating from Exchange 2003/2007 to Exchange 2010. The most efficient way is to rebuild the Outlook profile.
Thanks,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

External USB drive not recognized in OS X after rebooting from Boot Camp

Thanks in advance for any help. Here's the situation:
Everything works fine in OS X (10.5.2). In particular I have an external USB harddrive that I keep my iTunes songs on.
Then I boot via Boot Camp into Windows XP and play a few games. Then I reboot out of XP and back into OS X. At that point the external USB harddrive does not show up on the desktop. If I turn off the harddrive and turn it back on again, it shows up and is usable. I can continue to do that, but I would appreciate any advice on how to get the harddrive to show up when rebooting from XP (without requiring it to be turned off and on).
Thanks!

I've surfed around already before having my problem posted here because it's so frustrated…
AnaMusic: I've tried that but it isn't worked
Eric Ross: it's checked
LexSchellings: I did run "verify disk" and "repair disk" -> but no luck… My hard drive isn't mounted to Lion as shown in status. Is it something to do with NTFS format? I came across some forum and read that Lion is design to natively support NTFS..
Are there any ways around???

Not able to access webservice after migrating from 8.1 to 10.3,plz help

Hi All,
Prev our application was running in weblogic 8.1 and now we moved to 10.3
We are able to deploy our webservice in 10.3 and access the wsdl but we are not able to access the webservice from the client.
Even the testclient is not comming up.
After spending long time in that,now i dont have any clue on this issue.
Plz help on this
Thanks ni advance,
Mouli

Sunil,
We are not seeing any exception.We regenerated the webservice and then deployed in the 10.3
When we make req from the client ,we are getting null response but thing is there are no log trace in the server side for that
folllowing is the input string we are pasing to the method notifyservice
IN the client we pass the wsdl url and then pass the following input string and hit the notifySerivce method
Req:
<?xml version="1.0" encoding="UTF-8" standalone="no"?><object><GLCCode>102431</GLCCode><callBackNumber>888256798</callBackNumber></object>
Res:
<m:notifyService xmlns:m="http://www.testportal.com/outbound/tsp/WowWebservices">
<result xsi:nil="true"/>
</m:notifyservice>
Therre was an exception in the client side,plz check below
javax.xml.rpc.soap.SOAPFaultException: Failed to get operation name from incoming request
at weblogic.webservice.core.ClientDispatcher.receive(ClientDispatcher.java:317)
at weblogic.webservice.core.ClientDispatcher.dispatch(ClientDispatcher.java:147)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:473)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:459)
at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:569)
at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:422)
Thanks For your time,
Mouli

How many DNS record need to create in Internal & external DNS server for exchange?

Hi friends,
I recently installed Exchange Server 2010 in my organization for testing purpose and I've register a pubic ip too for exchange server on godaddy.com. How many
internal & External DNS records reqired to configure on external & Internal dns server so my all feature like Auto-discover, Activ -sync,& webmail start working perfectly.
It's my first time configuring exchange for a organization.
Thanks & Regards,
Pradeep Chaugule

Hi,
Just as what ManU Philip said, you need to create
Autodiscovery.domaincom and mail.domain.com for external dns server.
Generally, you configure your Exchange Servers as DNS clients of your internal DNS server.
Refer from:
http://technet.microsoft.com/en-us/library/aa996996(v=exchg.65).aspx
Best Regards.

Just resolved Back to my Mac issue called Apple Suppport in the UK and they were really helpful if the error DNS server not responding the problem is with Apple server not your server ( I had tried to reboot by router, restart my laptop etc.

I was having problem with my Back to my Mac as message was saying DNS Server not responding . I tried to turn my WIFI off, then my router to no avail. Decided to call Apple Support line in the UK . I got a call back immediatly and great support. The advisor took over my screen and we check that my laptop was synchronising with I phots and it was. The adviser also told that when the message DNS server is not responding next to Back to my Mac is has to do with Apple Server not mine , router etc... Hope this save others some time! Rather than spending time truining on and off changing IP address etc...

Thanks for your thorough post. I too need to use BTMM on almost a daily basis for my job, and it has fallen short countlness times. I too have taken great pains to check all of the typical trouble shooting steps within iCloud and in the Apple keychain on each Mac etc, but after the latest rounds of system updates from Apple a few weeks ago to Mountain Lion, BTMM on one of my Macs is completely broken and unusable. I would concur that if you need remote access for "real" mission critical use, just bite the bullet and pay for a service like LogMeIn. You won't regret it and you will get real software support.

DNS server not available/not responding

Hi,
I have 6-7 windows 7 system 2 of them system getting error while access anything
not always 2-3 time within a days.
DNS server not available
DNS server not responding
Please help me
Thanks,
Madhukar

Hello,
please post an unedited ipconfig /all from the problem machine and the DC/DNS server they use on the NIC.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

I am getting "dns server not responding"

I am staying in a hotel and my 3gs iphones keep getting "dns server not responding" my computers work fine in my room. My iphones don't but if I walk out in the hallway the iphones work fine. Help?

Found what was the problem on my configuration.
Since NLB VIP did not respond when traffic was going from other networks (Internet included) i had to reconfigure NLB from unicast to multicast. Then thing started to work but i had DNS resolution error.
Solution:
A BUG! When you change NLB cluster type, ipv6 that is configured on it gets removed so you have to enter it again. That's the same IPV6 IP under Infrastructure servers - DNS that ends with :3333::1 for your .domain.local

DNS server not responding on HP Pavilionp7-1012 desktop

When online I`m constantly having to refresh web connection, sometimes it works ,sometimes not. Only message I get is Dns server not reponding. ISP techs are worthless.

Hi
Please find the links given below might help you to fix your issue.
Video Link
Web Link
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

My GoFlexPro for Mac external drive will not work and freeze Finder after I switched to Mountain Lion. Anyone same trouble?

My GoFlexPro for Mac external drive will not work and freezes Finder after I switched to Mountain Lion. Anyone same trouble?

Search this site for many reports of problems with GoFlex drives.

How to migrate DNS, DHCP Server from 2003 to 2012

Hi all,
I have one old server running server 2003, and i need to migrate the dns and dhcp server to server 2012.
I found all the articles, there are only migrate from 2003 to 2008 or 2008 to 2012.
Is there anyway to migrate it?
Thanks.

Really confused why the "answer" to this thread states it can't be done, when clearly it can. This is the official approach (article dated Oct 2013):
Migrate DHCP Server to Windows Server 2012 R2
Within, you'll see that it says:
This guide provides instructions for migration of a DHCP server from a server that is running Windows Server 2003 or a later operating system to a server running Windows Server 2012 R2. Supported operating systems are listed in the following table.
Mike Crowley | MVP
My Blog --
Planet Technologies

Migrating from 2003 domain/forest level to 2008R2 with all DC's at 2008R2 and 2 other Domain External and Forest Trusts

Is there anything that needs to be done or considered when migrating from 2003 domain/forest level to 2008R2 with all DC's at 2008R2 with 2 other 2003 separate Domain incoming
and outgoing Trusts, one Trust that is a Forest Trust and the other is an External Trust? Is there any chance or risks that doing this upgrade will break either one of these Trust relationships? Some of the user accounts with SID history have been migrated
from both Domain Trusts to our domain. Any chance that this upgrade will break these relationships for users that are using SID history for access to folders and files in their old Domains? If so what can be done to protect these trusts and SID history, prior
to moving the Domain to 2008R2

Hi,
Based on my knowledge,
the Upgrade of the function level do not affect the trust relationship.
Besides, before you upgrade the Functional Level,
verify that all DCs in the domain are, at a minimum, at the OS version to which you will raise the functional level.
Once the Functional Level has been upgraded, new DCs on running on downlevel versions of Windows Server cannot be added to the domain or forest.
For more information about function level, we can refer to following links:
Understanding Active Directory Domain Services (AD DS) Functional Levels
http://technet.microsoft.com/en-us/library/understanding-active-directory-functional-levels(v=ws.10).aspx
What is the Impact of Upgrading the Domain or Forest Functional Level?
http://blogs.technet.com/b/askds/archive/2011/06/14/what-is-the-impact-of-upgrading-the-domain-or-forest-functional-level.aspx
Best Regards,
Erin

Hotkey (Ctrl+B) is not working after migration from Forms 6i to 10g

Dear Gurus,
Need your help regarding the following problem:
After migrating from Forms 6i to 10g (Rel 2), Ctrl+B (used to list the blocks in a form) hotkey is not working anymore (all other hotkeys are working fine). I've checked my FMRWEB.RES and it contains an entry for Ctrl+B:
66 : 2 : "Ctrl+B" : 70 : "Block Menu"
Additional Information:
OS: AIX
NLS_LANG = UTF8
fmrweb_utf8.res also contains the same text for Ctrl+B as above.
I tried to reproduce it on my Windows Machine (with NLS_LANG set to AMERICAN_AMERICA.WE8ISO8859P1) and its not working as well. I don't have right to put move files on AIX server but i can try anything (on my local system) suggested by the Oracle gurus.
Best Regards,

Dear Gerd,
"are you sure, that it is the hotkey"
Yes, i am dead sure. Since:
(1) It was working fine in forms 6i
(2) If you run a form and select Help => Keys, you will see Ctrl+B on the top of list
The problem is its not taking into account the keys which i am defining in the file (although i am following the same procedure detailed on metalink.oracle.com).
Regards

Check Stored Procedures after Migration from MS SQL Server 2008 to Oracle11

I successfully migrated my application database (azteca) from MS SQL Server 2008 to Oracle 11g R2. After migration, I found there are few stored procedures are not valid. How do I check these invalid stored procedures and find what is wrong with them by using SQL Developer? Thanks for your help.
Kevin

Hi Kevin,
You posted quite a bit today, so perhaps you have already worked this out. If not...
1. View -> Reports -> Data Dictionary Reports -> All Objects -> Invalid Objects [for a specific schema name]
2. Next, for each invalid stored procedure listed in (1)...
a. Open in the code editor from the Connections navigator tree
b. Click on the Compile icon (two gears meshed together) in code editor tool bar.
c. Look in the Compiler log pane for errors.
d. Correct the errorsOf course, success in addressing any errors depends on your skill level dealing with Oracle PL/SQL.
Also, it may be helpful to read over section *3.2 Stored Procedures* in the supplementary migration guide:
http://docs.oracle.com/cd/E35137_01/doc.32/e18462/trig_stored_proc.htm#CHDEIGBC
Regards,
Gary
SQL Developer Team

External DNS server not replicating records to secondary after migration from 2003 to 2012

Similar Messages

Maybe you are looking for