External Domain

I have monitor up and running but for the life of me I can't seem to get the performance testing and acct collecting working. I am trying to follow the directions and I am getting stumped on creating the external domain. Do I have to setup a second GroupWise system to run a single domain, post office and user just so that I can connect to it using and external domain from my main groupwise system? Hopefully I have read that wrong and that is not what I need to do. Any help would be greatly appreciated.

gibsont <[email protected]> wrote:
> I have monitor up and running but for the life of me I can't seem to get
> the performance testing and acct collecting working. I am trying to
> follow the directions and I am getting stumped on creating the external
> domain. Do I have to setup a second GroupWise system to run a single
> domain, post office and user just so that I can connect to it using and
> external domain from my main groupwise system? Hopefully I have read
> that wrong and that is not what I need to do. Any help would be greatly
> appreciated.
>
No, this becomes a "dummy" domain. You create an external GroupWise
domain, make up a name (maybe Monitor), leave the domain database location
blank and just create it. Go to your monitor console. Click on
preferences. Scroll down to mtp settings and in the domain to monitor
choose your new external domain. Put in the port that the monitor will
listen on. In other words, Monitor will pretend to be an MTA listening on
this port. So, if monitor is running on the same server as an MTA this has
to be some open port. Like maybe 7110. Next in the performance testing
choose what domain monitor should talk to. And check the performance
testing box if you are configuring performance testing. Save that.
Now, in ConsoleOne go to link configuration. For the domain listed in the
performance testing above. Set the link to direct, tcp/IP and put in the
IP address on monitor, and the port you confirmed above (in my example
7110).
Now go back to your external monitor domain and create a PO under it (like
MonitorPO). Then create a user (MonitorUser). Whoever is the accountant
for the GWIA should now set a forwarding rule to send the accounting
reports to this user.
Let me know if that gets you going, or if you run into other issues.
Danita - http://www.caledonia.net/blog

Similar Messages

Same usernames, internal vs. external domains, conflict when usingWebAccess

Currently running GW 8.0.2hp2 on NetWare 6.5sp8.
We have a single domain and single post office, and a single WebAccess
and single GWIA gateway. We about 25 external domains setup to allow
using external users' e-mail addresses our in internal corporate address
books and distribution lists following the procedure outlined here:
http://www.novell.com/documentation/...a/a2zvyc4.html
The problem is that one of my internal users in our corporate domain/PO
has the same userid as a user in one of the external domain/PO's. So,
for example, their e-mail addresses are:
[email protected]
[email protected]
Everything works except that my internal user cannot use GW WebAccess.
Trying to login to WebAccess results in the following error:
"Please login again. You may have typed your name or password
incorrectly. Remember that your user name must be unique."
If I either change my internal user's GroupWise userid, or if I delete
or rename the external user's userid, then my internal user can login
into WebAccess without a problem. So this does appear to be due to
non-unique username's. The WebAccess is seeing the internal and
external user names, and not allowing my internal user to login.
Is there a work around for this since the users are in separate domains
and PO's, or do I need to just rename my internal user's account? I
have no control over the external user's e-mail address, so I can't
rename their userid.
Is there a way to keep the "default WebAcess" gateway from looking at
external domain's for user account authentication? I have tried setting
up a class of service in the WebAccess gateway to deny access to the
external domain, and that hasn't worked either.
Thanks,
-Greg
former e-mail for posting:
[email protected]

I knew I should have looked a little longer.
http://www.novell.com/support/kb/doc.php?id=7006447
Thanks,
-Greg
On 1/7/2013 12:38 PM, Greg N. wrote:
> Currently running GW 8.0.2hp2 on NetWare 6.5sp8.
>
> We have a single domain and single post office, and a single WebAccess
> and single GWIA gateway. We about 25 external domains setup to allow
> using external users' e-mail addresses our in internal corporate address
> books and distribution lists following the procedure outlined here:
>
> http://www.novell.com/documentation/...a/a2zvyc4.html
>
>
> The problem is that one of my internal users in our corporate domain/PO
> has the same userid as a user in one of the external domain/PO's. So,
> for example, their e-mail addresses are:
>
> [email protected]
> [email protected]
>
> Everything works except that my internal user cannot use GW WebAccess.
> Trying to login to WebAccess results in the following error:
>
> "Please login again. You may have typed your name or password
> incorrectly. Remember that your user name must be unique."
>
> If I either change my internal user's GroupWise userid, or if I delete
> or rename the external user's userid, then my internal user can login
> into WebAccess without a problem. So this does appear to be due to
> non-unique username's. The WebAccess is seeing the internal and
> external user names, and not allowing my internal user to login.
>
> Is there a work around for this since the users are in separate domains
> and PO's, or do I need to just rename my internal user's account? I
> have no control over the external user's e-mail address, so I can't
> rename their userid.
>
> Is there a way to keep the "default WebAcess" gateway from looking at
> external domain's for user account authentication? I have tried setting
> up a class of service in the WebAccess gateway to deny access to the
> external domain, and that hasn't worked either.
>
> Thanks,
> -Greg
>
former e-mail for posting:
[email protected]

Why do I get error "The LDAP server is unavailable" while connecting to external domain via sync connection in SharePoint UPSA ?

Hello,
I am trying to connect to external domain via UPS Account having "Replicate Directory changes" permission on external domain while creating sync connection in UPSA.
I have checked below URLS :
http://social.technet.microsoft.com/Forums/en-US/1912bf88-8fec-4b5d-9d1e-a42db8318e33/ldap-server-is-unavailable-sharepoint-2010-user-synchronization?forum=sharepointadminprevious
http://social.technet.microsoft.com/Forums/en-US/6525d3aa-9197-42a2-aea0-190b84ac8356/the-ldap-server-is-unavailable?forum=sharepointadminprevious
And looks like its network connectivity issue - and hence I have verified that port 389 is open by infra team.
Note : I am able to connect to local AD , does it make sense that port is not open for external domain ?
Can anyone please let me know what can be the issue ?
Your help will be highly appreciated as I am struggling to fix this issue since quite long time but no luck yet.
Thank you in advance.
Kind regards,
Dipti Chhatrapati

Hi Dipti,
If you have Two-Way trust relationship then not sure if you have tried below:
Create a folder on the SharePoint server
Go to Folder properties - Security tab
Try adding user of the external domain on the folder
Please let us know if you are able to add the user or not. If you are able to add then it means that the connection and trust is proper and you should be able to create sync connection in UPA without any issues or else there is some issue with the connectivity
or the trust which is configured.
Please also make sure that you have given permissions to sync account as per below TechNet:
http://technet.microsoft.com/en-us/library/hh296982(v=office.15).aspx
Replicate Directory changes permissions are also required on cn=configuration container, below are the steps:
Grant Replicate Directory Changes permission on the cn=configuration container
Use this procedure to grant Replicate Directory Changes permission on the cn=configuration container to an account.
To grant Replicate Directory Changes permission on the cn=configuration container
On the domain controller, click Start, click Run, type adsiedit.msc, and then click OK.
If the Configuration node is not already present, do the following:
In the navigation pane, click ADSI Edit.
On the Action menu, click Connect to.
In the Connection Point area of the Connection Settings dialog box, click Select
a well know Naming Context, select Configuration from the drop-down list, and then click OK.
Expand the Configuration node, right-click the CN=Configuration... node, and then click Properties.
In the Properties dialog box, click the Security tab.
In the Group or user names section, click Add.
Type the name of the synchronization account, and then click OK.
In the Group or user names section, select the synchronization account.
In the Permissions section, select the Allow check box next to the Replicating
Directory Changes (Replicate Directory Changes on Windows Server 2003) permission, and then click OK.
Kind regards,
Bhavik K Jain
Please ensure that you mark a question as Answered once you receive a satisfactory response.

I created a website with iWeb but use GoDady for hosting it rather than MobileMe. The images on my Gallery page do not show at all on the external domain but they DO show when seen on MobileMe. Has anyone encountered this problem before? Many thanks!

Hello al!
I created a website with iWeb but use GoDady for hosting it rather than MobileMe. The images on my Gallery page do not show at all on the external domain but they DO show when seen on MobileMe. Has anyone encountered this problem before? Many thanks!

Just create a new page (or use the existing photo page) on your external site and use html to add an iframe sized to the page and link it to the mobilme gallery page. Works for me just fine when showing my gallery from a yahoo site.
like this
<iframe scrolling="off" allowTransparency="true" frameborder="0" scrolling="yes" style="width:100%;height:100%;border:none" src="http://gallery.me.com/your_account_name"></iframe>

530 5.7.1 Client was not authenticated - Exchange 2013 to external domains

Hi all,
I have an Exchange server 2013 on windows 2012 R2 and do all the configuration for sending and receiving the mail according to the document provided by Microsoft.
But whenever I am trying to send mails from external domains to my exchange server domain I got the following error:
530 5.7.1 Client was not authenticated
Same thing I am getting If I am sending mail through outlook from my Exchange domains to external domain.
But if I am selecting the
<label for="ResultPanePlaceHolder_ReceiveConnector_Security_contentContainer_chkPermissionGroupAnonymousUsers" id="ResultPanePlaceHolder_ReceiveConnector_Security_contentContainer_chkPermissionGroupAnonymousUsers_label">Anonymous
users in the security option of Default Frontend XXXX, I am able to send the mails through outlook.</label>
<label for="ResultPanePlaceHolder_ReceiveConnector_Security_contentContainer_chkPermissionGroupAnonymousUsers" id="ResultPanePlaceHolder_ReceiveConnector_Security_contentContainer_chkPermissionGroupAnonymousUsers_label">But I don't
want to use this option as it will enable to send the mails without validating the Exchange server user name and password.</label>
SO can anyone please suggest some solutions to resolve this as using Anonymous users fro sending and receiving mails is not secure.
Regards
Pankaj Raman.
<label for="ResultPanePlaceHolder_ReceiveConnector_Security_contentContainer_chkPermissionGroupAnonymousUsers" id="ResultPanePlaceHolder_ReceiveConnector_Security_contentContainer_chkPermissionGroupAnonymousUsers_label">
</label>

I have a java code for sending mails using the SMTP address of the servers. For sending a mail it required a valid user name and password. For all other SMTP servers if I have used invalid user name and password then I am getting the 530
5.7.1 Client was not authenticated error, but
if I am using my SMTP address and invalid user name and password then also I am able to send the mails.
So I just want to know what I have to configure in the exchange 2013 server so that it will validate the user name and password.
Regards
Pankaj Raman.
Hi Pankaj,
Thank you for your question.
Was invalid user name and password included in Java code?
Did outlook send emails?
If this issue happen on Java code instead of outlook?
In fact, Exchange server didn’t validate user account and password, user account and password will be validated on domain controller,
I suggest we create a new dedicated receive connector and enable “anonymous” permission for java code
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support

Exchange 2013 SMTP Mail Flow from external domains

I have query related to mail flow for incoming mails from external domains from Internet facing site. There are two sites - Site A & Site B. Both have Exchange 2013 CAS servers in NLB and Exchange 2013 Mailbox in individual DAG - say DAG1 in Site
A and DAG2 in Site B. Site A is Internet facing site and site B is not Internet facing.
An incoming Internet mail meant for recipient in Site B will land in Exchange 2013 CAS server in Site A. This CAS Server in Site A will look for the recipient in local Domain Controller and get to know the mailbox database of this recipient is in DAG2 (
in site B ) Will the FET service in EX2013 CAS in Site A make a SMTP connection with FET service of EX2013 CAS in site B which will then make SMTP connection to EX2013 Mailbox server in Site B which is holding the recipient mailbox Active copy for delivery.
OR
EX2013 CAS will send this mail to Ex2013 Mailbox server in site A and the Hub Transport service running in in site A will then make SMTP connection with EX2013 Mailbox server in Site B which is holding the recipient mailbox Active copy
Need clarification on above
Thanks
Parveen

Hello,
Come back and mark the replies as answers if they help and unmark them if they provide no help.
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Cara Chen
TechNet Community Support

Mail Service With Internal vs External Domain Question

I have a SLS setup with a private domain ex: server.acmewidgets.private
The local dns resolves correctly
I have a static IP for this server and I would like it to handle the email for my domain which is ex: acmewidgets.com
(Currently acmewidgets.com has been having it's website and email handled by an external source)
Do I need to reinstall the SLS with the domain server.acmewidgets.com to get the email working correctly? Or do I simply just point the MX Records to the static IP of server.acmewidgets.private?
If I do not need to reinstall, what needs to be done to create the flow of email in and out of the SLS?

No need to re-install Snow Leopard Server, you will need however to configure a few things.
First up you will need to configure the Mail service to accept mail for this external domain as at the moment it will be configured to only accept mail for your local domain.
In *Server Admin*, go to the Mail section and click on Advanced, now click on Hosting. In the hosting section you can add as many domains as you like for the mail server to accept mail for, the simplest way is to add the domains as virtual hosts.
Point your external MX records to the address for the server so that mail will be directed to your server. If your server is on a fixed external IP address then all done.
If your server is behind a firewall and on a private IP address you will need to forward port 25 on your firewall to the Snow Leopard Server. If you are also running DNS you should create a new Zone for your external domain with MX records that point to your Snow Leopard Server as clients will need to know that your server is the final delivery destination for that domain. If your server really is on a live fixed external IP address this step is not necessary.

Message tracking log of internal users who are all sent the mails to external domain

Hi ,
How can i get the message tracking log from internal users to external users?
We need the report of internal users who are all sent the mails to the external domain
Regards,
Sankar M
Sankar M http://messagingdevelopment.blogspot.in/

Sankar, your outbound send connector has an address space of *. So when you run "Get-SendConnector", you will see something like the following:
Identity                                AddressSpaces
Enabled
Unix System Connection                  {SMTP:*.domfreebusy.contractor.hunti... True
Outgoing SMTP Connector
{SMTP:*;10}                             True
Mailbox Journaling Connector            {SMTP:pdwastap01.huntington.com;1}      True
The middle one with the {SMTP:*;10} in my case (you may have a different number than 10 in yours) is my outbound connector. So yours will show an address space of {SMTP:*;<some number, 10 is the default>}. HTH ...

Not send mail for external domains

Hi,
I have installed OCS 10g(10.1.2) in linux. All components ok, but i not send mail for external domain.
Att,
Mesti

I remember in version 9.0.2 that i configure in SMTP_OUTBOUND the IP of DNS external to send mail for other domains.
Mesti

Loadvars not working on external domain

Hi,
I have Domain1 that is hosting my flash .swf file, and Domain2 that is linking to that .swf file. In the flash file I have a;
loadVars.send("another-domain.com", "_self", "POST");
command. When the flash file is placed anywhere on a page on Domain1, this works perfectly fine. But when placed on Domain2 (and other domains), this loadVars statement does not work and does not forward to another-domain.com.
But when I change "_self" to "_blank" - the statement works fine on Domain2.
Why doesn't "_self" work on external domains?
Thanks

This is my cross-domain.xml
<?xml version="1.0"?>
<!DOCTYPE cross-domain-policy SYSTEM "http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd">
<cross-domain-policy>
<allow-access-from domain="*" />
</cross-domain-policy>
I've allowed access from every domain. Have I done something wrong here?

How to receive replies back to SAP user's inbox from external domain.

We are facing a scenario where an email should be sent from SAP to any external domain ( ie: abc.com ) and I know that we can trigger outgoing mail from SAP but not sure about receiving emails to a specific SAP User id's inbox (SBWP). I was searching some information from SAP notes and found one (SAP Note:- 455140) but not sure whether it's possible in our current version(R/3 release 4.6C). Please confirm ASAP since we have to decide a key functionality based on this.

I have tried SCON -> Settings -> Inbound distribution.
But my question is how does the system receive the reply from the external domain. We can execute the send process in the transaction SCOT. But how do we initiate the receive process ? When we send a email from SAP to some external domain eg. yahoo.com, the recepient of that mail would see the mail as coming from the address that is configured in the SAP user master record (Internet mail) of the sender. So when a reply to the original mail is sent, it would go to the email address of the sender that is mentioned in the "Internet Mail" field of the SAP user master record and not to the SAP User Inbox of the original sender.

How to Setup RDS custom property when internal and external domain name space is different

Hi All
I am setting up RDS for customer
My internal domain name is domain.local and my external domain is domain.com
I came across below PowerShell cmdlets on some blogs because my internal and external name space are different
Set-RDSessionCollectionConfiguration –CollectionName QuickSessionCollection -CustomRdpProperty “use redirection server name:i:1 `n alternate full address:s:remote.domain.com”
In above command, remote.domain.com points to which host?
Is it pointing to RD Session Broker
OR
Pointing to RD Session Host servers
I am not sure what above command will do exactly ?
Any help will be highly appreciated
Thanks Best Regards Mahesh

Hi,
It all depends who is accessing the RDS Solution.
If you have a large BYOD or large number of external users, it would be better to use a public certificate.
Have a look at the following script which will simplyfy the configuration of the RDSH hosts with certificates.
http://ryanmangansitblog.com/2014/05/20/rds-2012-rdsh-certificate-deployment-script/
You can use a custom RDP property to hide the Session host names.
Have a look at the following article on configuring certificates:
http://ryanmangansitblog.com/2013/03/10/configuring-rds-2012-certificates-and-sso/
Ryan Mangan | Ryanmangansitblog.wordpress.com | Help keep the forums tidy, if this has helped please mark it as an answer

CRM2015 IFD Internal and External Domains

I am trying to setup CRM2015 with IFD. My internal domain is xr.local and external domain name is somethingelse.com. When going through the directions and searching through the forums I see similar questions regarding with no real information on the possibility.
Am I able to set this up to support 2 different domains and where might I find some guidance to do so?
Thanks...
GY

Hi David,
Yes. the above setup should "do the trick" as the servers you put with blank DNS entry should be excluded in the NRPT table.
You can confirm this by running at the client: netsh name show polocy
at command line and see something like:
Settings for da.domain.com
Certification authority                 :
DNSSEC (Validation)                     : disabled
DNSSEC (IPsec)                          : disabled
DirectAccess (DNS Servers)              :
DirectAccess (IPsec)                    : disabled
DirectAccess (Proxy Settings)           : Use default browser settings
Settings for .domain.com
Certification authority                 :
DNSSEC (Validation)                     : disabled
DNSSEC (IPsec)                          : disabled
DirectAccess (DNS Servers)              : 1234:1234:1234:3333::1
DirectAccess (IPsec)                    : disabled
DirectAccess (Proxy Settings)           : Bypass proxy
So in this scenario the .domain.com is using the DA while the specific entry (da.domain.com) is set as exclude and have emptry DNS ...
Hope this helps,
Ophir.

Problem in workflow sending mails to external domains like yahoo,gmail etc.

hi
i have one probs in my workflow that when i am sending mail to an external id it is not going to gmail,yahoo or hotmail etc.
it is being send to a particular domain say XYZ
but outside it ,no mail is send
and error is coming that recepient is unknown
we have firewalls being placed on smtp
and each and every setting in SCOT has been checked thorughly
but still mail except to one domain is not going outside
i have came across the info that since SAP doesn have any user id authentication but SMTP does has ,so when mail is being send outside the mail sending is failed,one option could be to disable the authentication at SMTP but thats doesn come inside the policy of client
so i think there must be a way out in SAP to deal with this
please suggest how can i send the mails externally,i ahve checked each and every thing inside my SMTP configuration ,adress is defined as * here but still mail is being send to internal domain of the client in which i am working ,but not at all to the external domains like gmail,yahoo etc.
any help will be highly appreciated
best regards
ashish

Hi Ashish,
I think you will need to check with your exchange guys because probably the exchange server will not relay the messages form the SAP server to external e-mail domains.
Regards,
Martin

Smtp_out very slow external domains

I have ocs 10.1.2 on Red Hat Enterprise Linux ES release 4 (Nahant Update 2)
When I send mail to external domain
smtp_out is very slow to close session
When I send 2 mails to the same outside user, the second mail is very to be delivered
because smtp_out try the last session wich is closed by the remote host.
My ocs is directly connected to Internet so no relay needed.
OCS / External Domains
SYN -->
<--- SYN
PUSH --->
<---PUSH
<----FIN
15,30 minutes later
FIN ----> (I supposed ignored by the remote server)
Think you

OiDAdmin / Directory Manager:
Entry Management, OracleContext, Computers, midtier, midtier ORACLE_HOME,
EMailServer, mailprocessconfig, smtp_in:
Right hand site, click on "All" attributes.
Change: orclmailsmtpminqueueage from 30 to 1
Add: orclmailsmtpminqueuepollinterval: 10
Entry Management, OracleContext, Computers, midtier, midtier ORACLE_HOME,
EMailServer, mailprocessconfig, smtp_out:
Right hand site, click on "All" attributes.
Change: orclmailsmtpqueuepollinterval: 120 to 10.
orclmailsmtpconnectionnumber: 30 to 0 (yes you read correctly)
orclmailsmtpminqueueage: 30 to 1
Stop and restart both smtp_in and smtp_out.

Send as external domain?

Hi all,
How do I configure Exchange to be able to send as an external domain? I have a closed relay which requires authentication, which works on the user's mailbox but not on external domains we don't own.
There's one email I need to be able to send as, or "on behalf of". When I go to send an email I get this error through Outlook:
"Error 550 5.7.1 Client does not have permissions..."
Under Mailbox delegation I can add recipients but obviously a mailbox not on this server will not show. I added a "Contact" but this didn't show either.
Any ideas?
Thanks

You can make the domains accepted domains and create recipients for the addresses from which you want to send. Using distribution groups for these addresses may be easier than mailboxes since they won't collect mail and use disk space.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."
Problem is that I don't want to receive emails on an external domain. I just want to send as a particular email address on an external domain outside the network?
E.g. I want [email protected] to be able to send as [email protected] but not to receive CompanyB.com emails as CompanyA need to be able to send to CompanyB and to the [email protected] email address.
Thanks for your help

External Domain

Similar Messages

Maybe you are looking for