External Drive and Vista problems

I recently got an external drive with the intentions of keeping my iTunes library on it. So far I have had nothing but problems. In the advance prefs. I set the music folder location to my external drive. To test it, I would rip a CD to iTunes (which is installed on the C drive). Sure enough, the library would be in the folder that I designated it in the ex. drive. My problem is that when I open iTunes, it creates a folder under Music on the C drive which contains the library with the ripped CD. Whats the point of putting it on an ex. drive if it automatically puts it in a folder on my computer? Its frustrating because I set the path of the library to my ex. drive. Why is it also putting a copy of the library on my computer under a music folder? Is it a "Vista" thing or an iTunes problem? I need to get this sorted out because I would eventually like to put my whole library (backed up onto discs) into the library only on my external drive before I purchase a new iPod soon. I dont want any music on my C drive because I need the space.

You know what? I figured this out myself the next day with a solution that I haven't seen anywhere else. I understood all the operations of consolidating libraries to seperate drives, but what was creating the problem was vista's fantastic ability to stick anything ripped into the owner/music folder despite where the library path is pointed. The answer was so obvious and simple. I went into the advanced prefs. and changed the library path back to the default owner/music folder. Then I right clicked the owner/music short cut in the start menu, selected properties and made the whole "my music" folder located on the external drive. Now when I plug in my external drive and open windows, the library is pulled from the music folder on the external drive and runs like normal. When I remove the drive and open iTunes, it gives me an error that the library cant be found. When I right click properties on the music icon in the start menu, it says it takes up zero bytes, which is exactly what I want. Its funny how I utilized the problem to get what I wanted.

Similar Messages

Error 36 and External Drive File Copy Problem & USB Connections

In attempting to copy a folder with some 200G+ of files from my iMAC, with OSX 10.6.7, to an external portable WD 1Tb HD, newly formatted to HFS+ (journaled), and connected to the iMAC via a USB cable to the USB port on the iMAC keyboard, I kept getting an error message that Finder could not complete the operation as some data couild not be read or written and transfered, and gave the "Error Code -36". After some searching ont he internet for this error code I came across a host forums discussiong the error code BUT all referred to it being the result of MAC OS hidden "dot-underscore" companioned files being created when the MAC OS X file system copies or moves files to a FAT16 or FAT32 volume. This was not the situaion in my case a both drives were OS X formatted HFS+. Eventually I came across a very vague reference to the error also occuring when the cable connection with the external HD was not solid. I reconnected my external HD and attempted the file transfer again - with the same result. Eventually I decided to plug the external HD into a USB pot on the back of the iMA itself, rather than the keyboard set. Sure enough the error issue disappeared - the transfer successfully completed.
So my question relates to the "usb connection" challenge with iMAC. the iMAC has only 4 USB ports on the back directly. I did have two desktop external HDs plugged into 2 of these USB ports at the back of the iMAC, as well as a WACOM pad device into the 3rd, and an EPSON 3880 printer into the 4th, and so was forced to employ the ports ont he keyboard for portable HD. So - what's the answer in a situation where the 4 are insufficient and it would appear that the keyboard ports seemed to be unpowered?? Any suggestions?

It's actually a Time Machine backup drive which is formatted in Mac OS Extended (Journaled). I wish I'd copied the exact error message.
I believe it was something to the effect of "Error 36: The file could not be copied because some of the date could be be read/written" or something along those lines. Next time it comes up I'll copy it. I have Drive Genius running with DrivePulse, but it doesn't ever seem to start.
My biggest concern is that this is a sign that the drive is failing. When backing up, it also slows, or stops midway through and just hangs there. Though I haven't done a lot of extensive testing on that because if the drive is failing, I don't want to speed that process up any more.
To add to the complication, there is a second external drive which Time Machine is also backing up for me. There is one particular file, the Virtual Machine file, I was trying to get off the other external drive and it produced the same problem. That's when I went into Time Machine to try and retrieve the file that way and it did the same thing. The other external drive is making some sounds, but it doesn't sound like a distinct clicking, more like a more pronounced version of the normal constipated hard-drive sound. The Time Machine drive, isn't making any obviously strange sounds at all.
So, I can't tell whether the drives are failing or if it could actually be that particular file itself causing some strange problems.

Hooked up my external drive and having some major problems??

So I put my info from my pc onto my new external drive and then plugged it in to my mac (usb) It reads it just fine and I can pull info off it . . .
But, I cannot put anything on it (claims the drive is "read only") and I cannot delete anything off of it (I don't have the right permissions)
So what is the problem here?
I don't recall how i formatted the drive but i did do it with my PC. I am wondering if mac can't write to fat32 or ntfs or something like that.
Any thoughts are appreciated. I am using a hitachi drive in an ADS 835 enclosure.
By the way, where and how do you set "permissions"?
Kal

Sorry for being too late. You will not have any permission problems after reformat.
I hope it works now... I am using an external 60 GB VFAT drive without a problem with my ibook.
haris

External Screen and Vista

hi,
I've saw a few topics talking about problems with external screens and vista.
I've got a big problem, i bought a screen (iiYama 24") and when i connect it to my Macbook on the DVI port, it works fine when i'm running leopard, but when i'm running vista, i don't manage to put the image on the screen. Can anyone help me please?

CONTROL PANEL,APPERANCE AND THEMES,CHANGE RESOLUION,ADVANCED,MONITOR PROPERTIES,INTEL GRAPHIC ACCELERATOR DRIVER FOR MOBILE,GRAPHIC PROPERTIES,DISPLAY DEVICES,MONITOR.

I'd love some help trying to figure out why my 2008 MacBook no longer recognizes my external drive and now is not downloading photos from my iphone....?

After many years of having no problems at all on my Macbook, I recently figured I should finally upgrade my OS. I did that about three weeks ago, updating to Snow Leopard (10.6.8). I used Time Machine at least once after the OS upgrade but now Time Machine no longer recognizes the external drive I have used for all these years to back up. The MacBook does not "see" it. (Disk Utility does however.) The computer then also stopped recognizing another La Cie back-up that I have and now... my iPhone cannot download photos? Yikes.
I have, of course, shut down numerous times, used different cables (that worked for some) and the two USB drives. I even used a firewire. Nothing worked. I also tried to "Repair disk" on Disk Utility. It didn't work either, giving me an error (that I didn't save, sorry).
I read many other discussions on the file format of the external drive and of course I'd be happy to reformat the external drives--however, it is obviously a tad nerve-wracking to reformat drives before having an accessible back-up. Suggestions? I do not remember what file format they have but am pretty sure it's not the Mac file system someone mentioned. The drives are a 2009 WD "My Passport Elite" and La Cie 2007 d2 Quadra,
In terms of other hardware available, we do have another MacBook Air but it has started rejecting both drives as well (without the Snow Leopard upgrade). We have an old Dell but it wouldn't have the disk space to help out much.
Any thoughts on the process involved would be welcome. Any ideas on the iPhone rejection would be helpful as well! It is a 30gig iPhone 4 that has 20 or so gigs free (not clear as iTunes says that there are abour 18 Gigs on the phone but 24 free gigs? I may be bad at math but that's 40 gigs...).
I am checking out iCloud but apparently there are only 55 gigs available?
Will be glad to hear any thoughts. Thanks!

Good afternoon Lyssa,
Phew. First of all, thanks in advance...these blogs are always comforting help!
So, to answer your questions: For the age of the hard drive.Well, I added memory a couple of years ago (RAM and hard drive). Being a mom leads me to eat up a fair amount of gigs with photos of my kids and, in fact, I think I entirely replaced the original drive, so it is a couple years younger than 2008 since I did that in March 2010. If there is some way to verify that (whether or not I replaced the entire drive), I'm all ears. I have 311 Gigs free, so it is not a space issue. I verified the startup disk on Disk Utilityand nothing showed up.
Question 1- What formats...
The La Cie is format Windows NT Filesystem 3G ....At the time that I bought it I was still using a PC as well as a Mac and was told by afriend to use this format...
The WD is Mac OS Extended (Journaled). I again tried to repair the WD last night and this is the error message: "Error: DiskUtility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files."
Also, Time Machine tried again to back-up and gave me this error: "Files can't becopied onto the backup disk because it appears to be 'read only'. You may needto repair or reformat the disk using Disk Utility. If the disk can't berepaired, you must use a different disk for backups. Open Time Machinepreferences to select a different backup disk."
Question 2. Other cables...
I used two other cables with the WD and that didn't change anything.
Question 3... Fire Wire from the La Cie
Yes, I used the Firewire cable from the La Cie and it is indeed present, though still not visible in Finder. Since it is not Mac OSExtended I know that I can't use Time Machine with it.
So, in summary...
I can plug in the La Cie and it is functional on the MacBook, visible on Disk Utility but not visible in Finder. The WD drive is not visible and not functional. So we can think it is indeed the WD that is not working.... Also, the iphone photos did, in the end, get downloaded, so it is not something more general.
Causes...
I forgot to mention that there is a "lost+found" file on the WD which apparently points to a UNIX /OS issue?
Some kind of "insurance"?....
I'm curious about how people avoid this kind of issue. You just regularly replace back-up drives and hard drives before problems come up? Time Machine is great and saves many of us from disasters, however, knowing that your Time Machine back-ups are vulnerable makes the whole system insecure. No way to have alarms ring before the drive goes out?
As for ways ahead...
It seems that I ought to be able to copy off of the WD to the MacBook then erase it and reformat it and start over again. However, I haven’t been able to see its contents except on random occasions. If you have any ideas on how to copy the Time Machineback-ups from the WD, again, I'm all ears!
Good afternoon Lyssa,
Phew. First of all, thanks in advance...
So, to answer your questions:
For the age of the hard drive. Well, I added memory a coupleof years ago (RAM and hard drive). Being a mom leads me to eat up a fair amountof gigs with photos of my kids ….and, in fact, I think I entirely replaced theoriginal drive, so it is a couple years younger than 2008 since I did that inMarch 2010. If there is some way to verify that, I'm all ears. I have 311 Gigfree, so it is not a space issue. I verified the startup disk on Disk Utilityand nothing showed up.
Question 1- What formats...
The La Cie is format Windows NT Filesystem 3G ....At thetime that I bought it I was still using a PC as well as a Mac and was told by afriend to use this format...
The WD is Mac OS Extended (Journaled). I again tried torepair the WD last night and this is the error message: "Error: DiskUtility can’t repair this disk. Back up as many of your files as possible,reformat the disk, and restore your backed-up files."
Also, Time Machine tried again to back-up and gave me thiserror: "Files can't be copied onto the backup disk because it appearsto be 'read only'. You may need to repair or reformat the disk using DiskUtility. If the disk can't be repaired, you must use a different disk forbackups. Open Time Machine preferences to select a different backup disk."
Question 2. Other cables...
I used two other cables with the WD and that didn't changeanything.
Question 3... Fire Wire from the La Cie
Yes, I used the Firewire cable from the La Cie and it isindeed accessible, though still not visible in Finder. Since it is not Mac OSExtended I know that I can't use Time Machine with it.
FYI...
So, in summary... I can plug in the La Cie and it is “functional” on theMacBook but not visible in Finder. The WD drive is not visible and notfunctional. So we can think it is indeed the WD that is not working.... ALSO,the iphone photos did, in the end get downloaded.
As for ways ahead…
It seems that I ought to be able to copy off of the WD tothe MacBook then erase it and reformat it and start over again. However, Ihaven’t been able to “see” its contents except on random occasions…
Any further thoughts are welcome!

Taking the plunge - external drive and exclamation points

Okay...
I have cried for help on this forum before about the somewhat common problem of iTunes 7 having a strange relationship with music on my external drive. The drive in question is a Lacie 250 GB Firewire drive.
A few months ago, out of the blue, one day I opened iTunes to find a sea of exclamation points. Though all the music I had added after a particular date was there, most of the music I had added prior to that was tagged with the exclamation. When I'd try to play one of these songs, iTunes would say it could not be found, though I could manually locate it and things would work fine. I tried a few fixes recommended on this forum by well-meaning but misguided people that resulted in a few sets of duplicate playlists but no fix to the problem. Then, one day, out of the blue again...it started working fine.
I don't even recall having restarted the computer. iTunes had just fixed the problem somehow.
Well, now the problem is back, and I've dealt with it for about a month. But I'm not convinced that it will just go away this time. So, even if I destroy my painstakingly cultivated hundreds of playlists, ratings, play history and comprehensive information (artwork, composer, etc.), I am determined to fix this problem without manually locating over 10,000 songs.
I am posting my attempts here as a record that will hopefully help those struggling with this problem in the future. Though I would welcome any and all comments or questions, I have frankly come to expect very little assistance or even the willingness to assist from this forum (that is to say, I imagine my unresolved question will languish for awhile as a monologue until I either fix the problem or die).
The first thing I will do (after doing a final backup, of course) is to determine whether it makes a difference if an updated version of my iTunes library file and .xml are in the Music folder (on my hard drive) or in my Musica folder (on the external drive). The latest edition of the file is currently on the external drive.
So, here we go...
Grant
Dual 1GHz G4, 1G RAM, 80G HD Mac OS X (10.4.9) iPod (1st Gen), iPod Shuffle (1st Gen), iPod Mini, External HD

Well, I've made quite a mess of things. So I have 14,000 songs. Most were added years ago. Looking at the date added in correlation with the exclamation points, it seems as though iTunes forgot the location of most of the songs added before 5/9/06. Mind you, iTunes worked fine (with the exception of doing this whole thing once before) until about a month ago. So, in May 2007, iTunes forgot most of what happened before 5/9/06.
(For reference purposes, the gap seems to exist between two songs I downloaded. "Help Me, Ronda" by the Beach Boys is the last song with an exclamation point in the date added list (see two exceptions below). "Proud Mary" by Ike & Tina Turner, on the other hand, is exclamation point free and only a couple of songs added after "Proud Mary" have exclamation points. They are:
Freedom, by Richie Havens, added 6/3/06.
Slow Free Bird, by Geesekey, added 12/17/06, a song I made in Garageband.
Now, don't let me give you the impression that there is a solid wall of exclamation points up to "Help Me, Rhonda." Maybe about every 10/20 songs, there is a song with no exclamation point that plays fine. Following Jase's lead before (his advice to another user), I have investigated some of these songs that work fine, but can't find any reason why these work and others don't (any difference in the iTunes Library.xml, files created with/without track number, etc.).
So, here's what happened in the past couple of days: I dragged my "iTunes Music" folder (located in my "Musica" folder on the external drive) into the iTunes source list). Most everything was duplicated, with the new songs playing just fine but lacking ratings and play history. Also, the new songs were not included on any playlists.
What I did next was poorly executed. I sorted iTunes by the Date Added and selected the first few thousand (roughly, A-J; seeing them according to the Date Added reveal that they weren't added in exactly a linear fashion). I hit the delete button and selected "Remove", but I then told iTunes to "Move to Trash." What I should have done, I imagine, is told iTunes to "Keep Files". So, my A-J songs are now deleted off the External Drive and gone (though I have backup DVDs generated by the iTunes "Back up to Disc" feature).
What should I do next? is the pressing question. Should I rip everything out and start from scratch with my backup discs? I guess the question I would have with that approach is this: if I restore from backup discs made three months ago, will I still have all my playlists, ratings and play history as they were when I made the backup? If that's the case, that'd be fine with me...I just want to make sure that's what will happen. Also, I have a backup of my iTunes Library file before I've done all this crazy stuff of the past few days, so if that enters into the equation, let me know.
Otherwise, let me address your comments, Jase.
Anyway, here's a question. Can you export your
playlists, even though they're made up of songs with
exclamation marks? If so, you could try exporting one
of them as an XML file. Then import it--you'll
probably wind up with duplicates (playlists, not
songs). Does the newly imported playlist play, or
does it still have the exclamation mark problem? I
wouldn't know what to expect, but it might be worth a
try.
My playlists themselves are all still the same as they were (though there are exclamation marks all over the place). From what I can tell, they look fine when exported to an .xml (the music folder seems to have the correct path). When I import it, it's the same deal: exclamation points at the same places.
If your playlists are exportable, you might want to
export them to XML files, just so you'll have those
little databases of them. Then, if worse came to
worse and you had to give up on your current Library
file and reload your Music folder into a new library,
at least there's a chance you could import your
playlists and not have to build them again from
scratch (assuming nothing has changed in terms of the
organization of your Music folder).
I'm not willing to export every playlist, because I have hundreds and it would just take too long. Is there a way to export all or a lot of playlists at once? Anyway, I figured that my playlist data was stored somehow in the iTunes Library file, so I felt I had a backup already. I could be wrong about this, though, as I really don't understand much about the iTunes Library file and .xml and the like.
Can you drag songs that have exclamation marks into a
playlist? Somehow, I doubt it. But if you can, you
could use new playlists to make a record of some
information that you might want to save if you had to
start all over again with a new Library.
Believe it or not, I can add songs with an exclamation point into playlists and they're added just fine (though, they still have the exclamation point). How this works is: I can't drag and drop them into a playlist. However, I can control-click and select "Add to Playlist" and it works. There's another mystery for you.
Have you looked at your iTunes Library.xml file --
specifically at the location information for
individual songs -- to see if the location
information exactly matches the information you see
in the Finder? I have found mismatches when
investigating some exclamation marked files. I didn't
know how that happened, and I didn't know what to
about it, but it was intriguing to see evidence of
some iTunes mischief.
Is the iTunes feature to start music file names with
the track number turned on? To my mind, fewer missing
song file problems occur when this is on.
Yes and yes. Based on what you told others, I have looked at the .xml of some of the problem songs and the working ones and could find no difference, but I didn't really know what I was supposed to be looking for. I also use the Add Track Number feature and always have.
If you still have the 28,000 songs in your Library
and want to go back to the 14,000, you could sort all
your songs by Date Added and delete the ones you
added on June 21. Or, if you saved a copy of your
iTunes Library file before you dragged your iTunes
Music folder into the library, you could just throw
out the more recent Library file and reinstitute the
back-up copy.
I probably should have done the latter (just restore the backup of the iTunes Library file). Oh well...
Some advice for future experiments. Try them with a
small sample if possible unless you're absolutely
sure they will work the way you want them to. For
example, drag one album in your Music folder into
iTunes rather than the whole Music folder.
This is a great idea. I wish I would have checked my sample more closely or done more tests before I plunged off the cliff.
Back up your iTunes Library file, as well as your
Music folder. (You might already do this.)
Check.
Those are a few things to think about. They probably
will not be helpful. Like I said, I don't think there
are clear answers to this problem. The best I can
wish for you is that iTunes will magically fix the
problem, like it did once before. Then, maybe there
are some preventive measures you can take.
Since iTunes did fix it once before, I would not
throw your current iTunes Library file away, no
matter what. If you decide to start a new library so
that you can actually listen to your music, rename
this Library file and keep it around, since it has a
lot of your metadata in it. You can try it every now
and then and see if iTunes spontaneously revives it.
Okay, I will post what I do next, provided that I don't hear any compelling advice and make my own decision (though I should be even more gun-shy after my recent blunders).
Grant

I have my iTunes library on external drive and can access from any PC. However I cannot access from new MacBokk Air.

My iTunes library is on an external drive and been using it on two PCs with no problem.
Now that I got a new MacBook Air I want to access the same iTunes library from the external drive and keep all the library and media on that external drive.
When I try to change to another iTunes library by hitting "option" with iTunes and select the library on the external hard drive I get the following message:
"The iTunes library file is locked, on a locked disk, or you do noy have write permission for this file."
I have read many posts in which many suggest to go to the library or media file on the PC and right click to make sure the read only tab is not checked.
I uncheked the read only tab and gave full permission to all the iTunes files and folders.
The unusual part is that I can use this external drive on many PCs that I have tried with no problem at all.
I just select a different library, which is on my external hard drive and everything works, play lists and everything.
However, when I try it on a MAC i get the message stated above:
What can I do to be able to access my External iTunes library from new MacBook Air while keeping everything on the external drive like I can on PCs?
I am running latest version of iTunes and Mavericks.
Please advise.

Here are the official Apple Support instructions:
http://support.apple.com/kb/HT4527
Ciao.

My late 2006 iMac stopped finding my back up drive. I've tried rebooting but no good. Tried unplugging the external drive and rebooting. How do I tell my computer to find the external 500 GB dive that is plugged into it?

I have a Western Digital 500 gig external hardrive that I have been using successfully with Time Machine to back up my files. A few weeks ago I noticed that the external drive light was ON but not moving back and forth indicating that it was working. The light was now simply ON but not moving. So I checked and sure enough Time Machine didn''t "see" it anymore. When I tried to fix it, the drive is no longer on the list. Nothing is on the list. The external drive is not showing anywhere, including the desktop. And when I tried to switch Time Machine on the list is empty and it wants to "look" at airport for a wi-fi type peripheral. Help! How do I get the iMac to realize it has an external drive plugged into it? I don't even know why it worked when I first got it or why it stopped working. I only know that Time Machine doesn't have it listed.

Open disk utility and check the external drive and repair it. If that didn't fix the problem or if you are unable to see the drive in disk utility then the drive could be bad.

Using Disc Utility to copy my hard drive to a brand new external drive and am having the error "Unable to create...(Cannot allocate memory)".

I'm not very tech savvy but am trying my best to use Disc Utility to copy my hard drive to a brand new external drive and am having the error "Unable to create...(Cannot allocate memory)".
Last night no problems, woke this morning and it was freezing so I forced a restart and got the grey screen with the folder and question mark. Ran off to best buy to get an external drive... Please help! Thank you!

I have done both. When I hold down the "C" key it pauses for a few seconds while the cd spins and then the flashing folder icon appears.
Could be you have the wrong cd/dvd. The mac will only boot a supported cd/dvd for your machine. The flashing question mark indicdates your machine could not find a valid os.
When I hold down the "option" key for the startup manager the cursor comes up and moves but the actually manager doesn't come up no matter how long I leave the laptop on.
Not sure. Could be your machine does not support the startup manager. You would think the machine would ignore the key.
Where did you get the dvd? What is the number on the DVD?
What machine do you have anyway?
This site provides more information, but lacks security.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
or
This site provides more information, but lacks security too.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
http://www.chipmunk.nl/klantenservice/applemodel.html
( hint by K Shaffer )

How to transfer itunes library to external drive and keep playlists and ratings

I don't have much space on my laptop. I have attached an external drive. I want to access my Itunes library from
the external drive. All attempts to move the library now result in me losing my "playlists" and even more importantly
my ratings and genre information.
How can I move the library with all my associated data intact such as the playlists, ratings, genres?
I want this external drive to be the main location where I access my Itunes library.
Once that is done I will work on backing it up, as that will be the only place that the data exists.
Also, will my Apple TV be also be able to access my Itunes library with playlists. thus far I have not been able to do this.

Start by consolidating your library. When you consolidate, any songs in the iTunes Library that are not in the iTunes Music Folder are copied to the Music Folder and the Library is updated to point to those new files. Files already in the iTunes Music Folder have no changes made to them: Consolidating your library - Windows
Then copy the iTunes Folder to your external drive. Copying the whole folder brings with it the iTunes Music folder and also the iTunes Library (iTunes Library.itl in Windows) database file which holds all the information about your songs (Playlists, Ratings, Play Counts, Last Played, Date Added, etc). You'll get more information including the Folder/File structure in this article: What are the iTunes library files?
Disconnect your external drive and connect it to your new computer, copy the iTunes folder to the new pc. When you copy the iTunes folder make sure you put it into the default location on the new computer. On a PC this is \Documents and Settings\Username\My Documents\My Music\ (or C:\Username\Music\ in Vista). You should also use the same version of iTunes on both computers.
Once you have copied everything over hold down the Shift key in Windows when opening iTunes. In the resulting dialogue you will get the option to create a new library or navigate to an existing one. Navigate to where you placed the copy of the library file and open it up: How to open an alternate iTunes Library file
If you have any iTunes purchases in your library don't forget that you'll need to authorise your new computer to play them. Also if you are disposing of the old one remember to deauthorise it so you don't use up one of your allowances: About iTunes Music Store Authorisation and Deauthorisation

HT1364 If I already moved Itunes media folder to external drive and now music is not matching up in iTunes?

Dear Itunes Community~
This is my first time using glad you are here, but all the passwords!!
Question/Quandry:
If I already moved Itunes media folder to my external drive and now my music is not matching up in iTunes, what should I do? I have tried my solution !?, and now I have 17,000 songs, instead of 9,000!
Should I just uninstall Itunes, and then reinstall Itunes, and let it do it's thing, and then figure out how to move to the external hard drive later?
Help, I screwed it up all on my own!
Any/all help and Itunes educated suggestions appreciated!
Thank you very much,
Doris =:o
PS ~~ Is there anyway to easily delete duplicates?? Seems not?

I have a very similar problem. Hope I don't confuse people trying to help us since the solutions may be different.
I had my iTunes path directed to a 2nd internal hard drive. Everything was working fine - except I found that purchased Apps were still being downloaded to the Mobile Applications folder on my main hard drive instead of the 2nd internal drive. I decided to retry directing the iTunes path to my 2nd internal drive, hoping that might get iTunes to save my Apps there. Big Mistake. Suddenly, there were no Apps showing in my iTunes Library Apps window at all. I verified the downloaded apps are still in my main hard drive's Mobile Applications folder, but I cannot get iTunes to display them in my Apps Library window anymore.
I decided to try downloading a new app and, sure enough, iTunes once again downloaded it into the very same Mobile Applications folder on my main hard drive, where all my (now orphaned) original apps are, but the only one iTunes will only display in my Apps window is the new one. I read you can redownload purchased apps, but my apps are not missing. iTunes just won't display them in the Apps window anymore.

HT6012 Can I take an older imovie made back in 2009 found on an old external drive and get it to iCloud? When I try to open it, it says can't open because the file was iMovie 9.0.9. I just want to get it on Theater so I can watch on Apple TV and have in

Can I take an older imovie made back in 2009 found on an old external drive and get it to iCloud? When I try to open it, it says can't open because the file was iMovie 9.0.9. I just want to get it on Theater so I can watch on Apple TV and have in iCloud

ERROR (1)
- Place the iPod in DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Try on another computer
- Try another cable
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Best setup for external drives and backup

I'm using Aperture to organize several thousand photos. I've gotten good advice her before about how to get started on this. I'm not a professional and I'm not an experienced user of Aperture, so don't assume a lot of knowledge when you answer. I'm wondering what the best way to set up the file storage would be. I use a MacBook Pro, so obviously that's out for storage, and financially, purchasing a more powerful desktop is out for the time being. I was thinking of purchasing a mirror drive system, like this: http://www.newertech.com/products/gmax.php
But then, there still remains the problem of backing up the photos in case of a fire or theft, etc. I have many of them on DVD, but not with all the metadata that I've added. Can I back the external drives up to a cloud-based storage system through the wireless on the MacBook?
Or, is the answer none of the above? What recommendations do you folks have for managing this?

more:
Paula-
Mirror drives are very much less than ideal for images backup. Mirroring occurs in real-time, so errors, breaks, etc. simply get copied. With images work (unlike fanancial work, for instance) we do not need real-time backup we just need regular accurate backup. Just have 2-3 external drives and rotate them regularly, always having one drive off-site (could be in your car or whatever). Back up manually rather than automatically so that you can be reasonably certain that the backup is not backing up something that just broke.
I suggest the below workflow. Note that most important is that original images from the camera card are copied to two locations before reformatting the card and before importing into Aperture or any other images management application.
Original images never change, so I prefer to manually copy them to two locations asap after capture: one location is the computer drive and the other is an external backup HD that itself gets backed up off site regularly. That assures me that "the pic is in the can." Until two digital files exist on different media I do not consider the pic in the can.
Then reformat the card in-camera, not before.
The Masters then get imported into Aperture from the Mac internal drive by reference (i.e. "Storing Files: in their current location" on the Mac internal drive). After editing is complete (may take weeks or months), from within Aperture I relocate the referenced Masters to an external hard drive for long-term storage.
I do use Time Machine routinely on the MBP, but for the daily-volatile activities going of the MBP. I prefer not to have TM be my backup-of-originals protocol. Instead TM backs up the Mac internal drive on the TM schedule and I back up original images asap based on my shooting schedule. Also the TM drive is a different drive than the drives used for long-term original image files archiving.
TM does back up my Library because the Library lives on the Mac internal drive but I do not assume that TM works for Library backup. I back the Library up to Vaults (on the same drives I put archives of Masters on) independent of TM. IMO one should back up image files and back up Vaults manually after verifying that what is being backed up is not broken, because automatic backup will just back up a broken Library or whatever.
Note that Masters need only be backed up once (but to multiple backup locations) and that backup should happen immediately after copying to the hard drive from the camera card, before involving Aperture or any other images management app.
Sorry for the redundant verbosity above but some was copied from previous posts. Also, I reinforce what Léonie said about DVDs. DVDs are way too slow, unreliable, etc. Instead rotate multiple hard drives to achieve redundancy.
HTH
-Allen

Recorded 2 consecutive shows, one went to my External Drive and the other to the DVR any clues?

I recorded the Hatfield and McCoy programs the one which recorded @ 10pm went to the external drive and the one recorded right after at 12am went to the DVR. This just started around May 9th. We have done the Auto-Correct for our DVR and that has not solved the problem.

Are other shows recording to the internal hard drive as well? Once your show has recorded to either the internal or external drive, there's no way to move it to the other. So now that its recorded that way, its set. Please check newer recording to see if they are recording to the internal drive. It should only be recording to the internal drive if the external drive is full or the DVR is having problems.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Here's a very basic question about 2 TB external drives and Time Machine.

Here's a very basic question about 2 TB external drives and Time Machine.
Ihave a Mac Pro with a .75 TB and 1 TB drive. It also has a 1 TB 2ndinternal drive. My current external drive is too small so I'll begetting a 1.5 TB or 2 TB drive.
Obviouslythe new larger 2 TB drive will backup everything on the Mac Prointernal drive with Time Machine. But there will be 1 TB of space leftover going to waste.
ShouldI partition the external drive so that the TM portion will be 1 TB andthe use the remaining extra partition for additional file backups withCarbon Copy?
Thanks for any insights.
I tried searching around on the new Apple discussion forum, but I find it much harder to use than the old forum I used to use.

The problem with terabyte drives is that that a 3 TB is about as big as you can get without going into RAID territory. Ideally, a Time Machine drive should be 3 times as large as all the drives you are backing up. So, if you have 2.75 TB of internal storage, you should have 8 TB of Time Machine space.
Of course, that is "should". If your TB drives are mostly empty, then you can get away with something 3 times the size of your used disk space. Just remember that you are pushing it. Linc is right about Time Machine needing space to work.
It is unlikely that you have regular churn on 2.75 TB of disk. I suggest identifying which drives and folders have the most activity and excluding those drives and directories that don't change much. It would be better to archive the data that doesn't change often and keep it out of Time Machine. Then you may be able to get away with a 2 TB Time Machine drive.

External Drive and Vista problems

Similar Messages

Maybe you are looking for