External Drive does not mount with Firewire but is ok with USB !

Since 10.4.4 my external drive is no more recognized using firewire, but it mounts perfectly with USB
Using FW request me to reinitialize the disk, but then, the apple disk utility it is unable to reformat!
then I unplug FW , sets USB and everything is ok!
I connected the drive to my old IMac G4 700 and evrything is fine, FW and USB, using the same drive, using the same cable. I did repeat the test many times it is always ok with the old mac and it never mounts with FW on my newer Ibook.
I did reset the openfirmware but that was not successfull!
Then I brought both iBook and the faulty Drive to a friend (he owns a powerbook and also an external drive)
we verified that my drive does not mount on his powerbook G4 12" using FW and is ok with USB.
Then he tried his external drive and was very surprised to find the same fault with his drive and his PB using FW. (as for me everything is ok with USB!)
We are both very puzzled, our drives did work well before, (before 10.4.4 , and 10.4.5 did not improve!)
and now, with firewire,disks never mounts..
In addition I tried with the same cable to alternatively start, using the target mode, the ibook and the imac. For each test they were both recognized as external drives as they should..
So to try to sum up
- Disk mount ok with USB (1 or 2)
- Disk is no more recoknized with FW (but it was before with the exact same hadrware)
- FW Cable seems to be ok as targuet mode works properly
has anybody any idee?
It would be very munch appreciated..
thanks a lot for having read this long post..
External hard drive P/N:
the western digit disk 160G is in an enclosure referenced
Prolific PL3507 Combo Device
I tried to exchange the disk of this box with an old maxtor with the same bad result!
IbookG4 1.2 & IMac G4 700 Mac OS X (10.4.4)

Hi Andre, I can't remember except to say that it was mounting fine with tiger and I was able to copy files to it for backup purposes.
I just hooked it up to a PC and windows tells me the drive is not formatted. That's not a good sign, and this was stupid: I think I had the drive hooked up to my Mac Pro during the upgrade.
Idiotic, granted. But this was an upgrade, not a full install and I maybe was trusting in Apple's ability not to do extraneous stuff during an install like windows does. Oh well...
I appreciate any further ideas. Many Thanks, Frank.

Similar Messages

LaCie HD does not mount via Firewire, but does via USB (in Tiger)

I've read various posts on issues people faced when using a LaCie firewire HD after upgrading to Tiger. I never had any issues pre upgrade. I have installed the new firmware on my d2 250GB drive, at least I think I have. The drive will not mount when connected via firewire, but will when connected via USB. When I try running the update tool, it sees the drive and says there is no update available. Just to be clear, this is when the drive is connected via USB. The tool does not see the drive when connected via Firewire.
My firewire is definitely working fine (tested with iSight).
I've emailed LaCie, we'll see if that leads to anything. Any ideas???

My Lacie ethernet mini is not working after Lion upgrade.
Finally got an admission from Lacie that the login software won't work with 10.7 and they suggested going back to Snow Leopard . . .
Apparently the login software cannot be changed or overwritten so now Lacie drives are obsolete when using Lion.
I wish there was a way to wipe it clean and use it without the login software, but they couldn't suggest a way.
I note you may have had better luck but I don't know how to use terminal, so I may have to junk it, or possibly take out the drive and buy a caddy for it?

External drive does not mount on boot

I have a Toshiba MK5055GSX 500GB external drive which I use for Time Machine but for some reason it does not automatically mount from a cold boot. Before I started to use it for Time Machine (it was formatted as NTFS at the time) I had not problems with it. All other external drives correctly mount on boot.
I had thought it might be a problem with the drive itself but if I disconnect it and reconnect it with my iMac running it mounts every time without fail. If I reboot after it has mounted it also mounts at boot. Only if I start the iMac using the power button with the drive already connected does it fail to mount and the results are consistently repeatable.
Does anyone have any ideas why this might be happening and how to fix it?

Does this drive have a separate power brick? If it does I suggest using it to see if that fixes the problem. If the enclosure has both USB and Firewire ports try using the drive on a Firewire port instead of a USB port.
It sounds like the drive is not spinning up early enough in the startup process to be detected.
Not knowing how you prepared the drive for the Mac, you should re-prep the drive as follows:
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

External Drive does not mount on desktop

Hi,
I did a Leopard upgrade and most everything went smoothly. But when I boot, Leopard pops up a window telling me that a disk I inserted is unreadable (it took me a time or two to realize it WAS referring to my USB 2.0 external hard drive).
It gives me the option to ignore, initialize or eject. Thus my hard drive won't mount on my desktop. It DOES show up in Disk Utility, however, so maybe there is hope.
So what are my options? Am I looking at burning DVDs all day so I can re-initialize or reformat this drive for Leopard?
I appreciate any help, and I did a lot of searching on this topic, so I'm aware that there may not be any solutions as of yet.
Many Thanks, Frank B.

Hi Andre, I can't remember except to say that it was mounting fine with tiger and I was able to copy files to it for backup purposes.
I just hooked it up to a PC and windows tells me the drive is not formatted. That's not a good sign, and this was stupid: I think I had the drive hooked up to my Mac Pro during the upgrade.
Idiotic, granted. But this was an upgrade, not a full install and I maybe was trusting in Apple's ability not to do extraneous stuff during an install like windows does. Oh well...
I appreciate any further ideas. Many Thanks, Frank.

External Hard Drive does not mount

My 2TB external hard drive does not mount and I cannot get it to. Have tried turning the hard drive off and then back on. No response. Any thoughts as to how I can get it to be recognized?

You can try doing a SMC reset, if it doesn't work the first time it's totally OK to reset the SMC several times.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

External drive does not show up in finder/ disk utility not able to repair

Hello,
My external drive does not show up in finder. But it appaers in DISK UTILITY. When I tried to repair it, it said:
Verify and Repair volume “ANNE HD”
** /dev/disk1s1 (NO WRITE)
** Phase 1 - Preparing FAT
** Phase 2 - Checking Directories
Unable to read directory (Input/output error)
Volume repair complete.Updating boot support partitions for the volume as required.Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
How can I back up files if the external drive is not found in FINDER? I tried to restore with disk utility, but it doesn't seem to be able to select the hard drive.
Can you please help me?

Thanks a lot Niel,
Diskwarrior is a program for what you need to buy a DVD. I live in Brazil I have no idea where to buy it. Or can you download it?
A

External drives will not mount if the wi-fi is on!

I have had no replies where I had previously posted so I thought I would try here as I think that it is mainly an Airport problem.
My problem is this. I have a Macbook that I use at home no problem. I teach at a college where there is are two wi-fi connections that my Macbook automatically connects to depending on where I am in the department. Recently almost everything I try and do causes the spinning beachball for 10 minutes or much more at a time. Additionally, I have discovered that any external drives will not mount on my laptop, unless I switch the wi-fi off! No-one else is having any problems at all.
One of the wi-fi connections is an Airport Extreme. Each morning my laptop gets the message that there is a problem and I need to update the firmware to 7.5.2. (I originally set the Airport up through my laptop) I am very wary of doing this as everything is working fine for the other 20+ laptops in the department and I have read lots of reports of problems with this update.
I suppose my questions are these - 1 Does anyone have any idea what is going on with my laptop? 2 What should I try doing to solve this issue?
I have searched the net and cannot seem to find any reference to this problem anywhere else. Any ideas at all why this might be happening will be much appreciated.

It was not until Mac OS X 10.6.4, not possible to run on a 10.2 machine, that ExFat was supported.
Many older Macs also will not recognize GUID formatted partitions made to boot Intel Macs either.
10.2.3 is the first system to support Apple Partition Map HFS Extended (Jornalled).
There may be NTFS support based on my tip here:
https://discussions.apple.com/docs/DOC-3003

My external HD does not mount despite it appears on Disk Utility

I have been using an external HD to keep my video library. Just this week I updated my library and everything was OK, but when I tried to see the videos on my mediaplayer the disk didn't appear. I connected it again to my iMac but now the external HD does not mount. I tried Disk Utility, the disk appear gray on the sidebar but it doesn't mount. I run Repair but I get the b-tree node size error and the disk still does not mount.
Please help!!!!

If DiskWarrior can't fix it, you might try Data Rescue II...
http://www.alsoft.com/DiskWarrior/
http://www.prosofteng.com/products/data_rescue.php
(Has a Free Demo to see if it could or not, but you'll need another drive to recover to).
Or FileSalvage...
http://www.subrosasoft.com/OSXSoftware/index.php?%20mainpage=product_info&productsid=1
to recover what you can.

External drive does not show up in Time Machine

I just applied the lastest update today and now my external drive does not show up in Time Machine. It does show up in Finder.

Gracias Sir Kappy, These instructions didn't include Yosemite, but I followed the closest and used Mavericks instructions and the command-R was the key, which I suppose means 'restore?' Nothing is explained as we should all be able to read the programmers minds by now...
Thanks for the help and problem resolved.

When I press on a land line number, the phone does not call the number, but comes up with a screen to send a text to it. How do I get my phone to default to phoneing a landline?

When I press on a land line number, the phone does not call the number, but comes up with a screen to send a text to it. How do I get my phone to default to phoneing a landline? When I press a mobile number in contacts, the phone automatically phones the number. I do not mind this as I hardly ever send texts, but I would like to have the option of what to do. This seems such an obvious issue but I can not solve it even with much web searching. Thanks!

I can't delete my question, so I'll just say that you press on the type of number written in the box to the left of the box you typye the number into. Dumb or what?

IFS Drive does not mount as well as Item Name error

I'm having two problems:
1. The IFS drive does not mount. (Log info is appended at the end)
2. In IFS Manager, when I click on any of the users, I get the error: IFS-12200: Invalid item name specified (AnonymousCredentials)
Fri Aug 04 11:44:26 CDT 2000
iFS NT File Server Version 1.0.8.1.0 Production
Fri Aug 04 11:44:26 CDT 2000
ServerName(id): NtfsServer(2924)
server: NtfsServer
username: system
AnonymousUsername: null
DriveLetter: o
NtfsSessionCache: 40
OptimizeStartup: true
LogLevel: 1
LogStackTrace: true
net start OracleIfsd
Return code = 2
ifsmount o
Return code = 2
SR Event: ID:3102 PENDING SPECIAL SUBTYPE:13 3106L
SR Event: ID:3102 COMMIT SPECIAL SUBTYPE:13 3106L
(0) Unable to open IFS device
ifsdismount o
Return code = 2
Cache performance for session cache
CurrentSessionCount=0
HighestSessionCount=0
CurrentSessionCache=0
Thanks!
null

Fixed both problems:
- Problem 1 was being caused because of insufficient memory
- Problem 2 was fixed by re-installing IFS.
null

External drives will not mount if wi-fi is on

I was really unsure where to post this. If you think it should be in a different thread then let me know.
My problem is this. I have a Macbook that I use at home no problem. I teach at a college where there is a wi-fi connection that my Macbook automatically connects to. Recently, I have discovered that any external drives will not mount until I switch the wi-fi off. Additionally, almost everything I try and do causes the spinning beachball for 10 minutes or more at a time.
I have searched the net and cannot seem to find any reference to this problem anywhere else. Any ideas at all why this might be happening will be much appreciated.

It was not until Mac OS X 10.6.4, not possible to run on a 10.2 machine, that ExFat was supported.
Many older Macs also will not recognize GUID formatted partitions made to boot Intel Macs either.
10.2.3 is the first system to support Apple Partition Map HFS Extended (Jornalled).
There may be NTFS support based on my tip here:
https://discussions.apple.com/docs/DOC-3003

Running Time Machine for the first time, how that I make sure that some information I have in the external drive does not get erase in the prosess

Running Time Machine for the first time, how that I make sure that some information I have in the external drive does not get erase in the prosess

1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Note: This is now your Library. It's not a Back Up, and you need another disk for backing up.
Regards
TD

External Drives will not mount

Hi guys ... this is my first post in these forums, so sorry if it is in the wrong category.
I have a Mac Pro, purchased in Feb this year. I have an iOmega Ultramax firewire drive, that is partitioned into four disks.
I have had time machine running well, and it backs everything up onto a second iOmega drive I have.
Yesterday, before I left for work, I saw TM was sbusy backing up. The finder was not responding but I just left it, as didnt have time to loko into it before leaving.
When I cam home last night, I saw it was still not responding, and TM was still trying to backup. All other apps were functioning fine.
I tried to force quit Finder and TM, but it did not work. I then shut down the Mac manually, and rebooted.
The problem has now arisen, where the partitioned drives will not mount at all. The TM backup drive is fine, and I can browse TM fine with it - so good to know all my data is backed up.
I looked at the logs in console, and see the messages saying that the drive cannot mount as it is dirty?
What I have tried as troubleshooting steps:
•Disk Utility to try and mount the drives, but they are not showing up
•Connecting the drive to my Mac Mini - still nothing.
•DiskWarrior - nothing. Only my TM backup drive and Mac HD show up.
•Running FSCK from Terminal. I can see the drives in /dev, but keep getting "Bad Super block" errors. When I try looking for another Super Block, it says nothing found, and would I like to run it manually? The same happens when run in single user mode.
•Unplugging the Mac and the drives from the Mac, waiting 5 mins, resetting the NVRAM and PRAM (booting up holding CMDPR and waiting for the second chime, shutting down, plugging in and turing n drives, rebooting ... nothing!
It seems as though I have exhausted all possible options.
I now accept that the drive is unrecoverable, and am relieved that the TM backups are OK. I am thus happy to format the drive and repartition it, then restore everything from TM. Will be a fairly big job, but at least the data is backed up.
The only problem I have, is I cannot even mount the drives to format them!
Is there any safe way of doing this over the command line. Or even better, has anybody gt any other advice as to options I can try?
I hope I have been thorough enough in my explanation here.
Thanks in advance,
Dave

The only problem I have, is I cannot even mount the drives to format them!
I have a feeling that the partition map is bad. Does the drive itself report to DU? If the drive does show up, you can select that, and click the Repair Disk button under the First Aid tab. If that doesn't fix it, with the drive selected, click the partition tab and re-partition the drive. After that, I would erase the newly created volumes with 1-pass/zero out option selected and restore the data that was on the external from TM.
If none of this works or if the drive itself (not the volumes) doesn't show up in DU, you either have a bad drive or bad controller in the external case. How old is the Ultramax? Just wondering if it might still be under manufacturer's warranty. I would check to see if you are still eligible from the manufacturer's warranty and get the whole external unit replaced. If you are out of warranty, I think it likely that you need to replace that external with a new one. I've had a drive go bad in an external case (this one I could still mount but the heads would 'freeze') and the controller on another external go bad (this one, the drive would not report to DU so I took the drive out of the enclosure, stuck the drive in another case and there was no problem with the drive.)

After upgrade to Snow Leopard, my external drives do not mount...WHY?

I have spent most of this morning trying to find an answer to why my external hard drives are not mounting in 10.6.1. I have never had a problem with these drives (4 firewire drives). Not one of the will mo0nt. They do not show up under Disk Utilities either. these forums never get to the point and this is very frustratiing. I am not new to mac, I have used a mac since 1989 - never have I had a problem like this. And it seems like others are having the same problems to varying degrees. Why is there no clear answers to fix this? HELP? I need to get to my client files.

If they are Firewire, read on.......
Thought you could use this info about getting FireWire to work!
First, you should always Repair Permissions in Disk Utility before and after any update; I would do that now. If you installed your update with FireWire plugged in, your Mac may not recognize it anymore.
Try resetting your FireWire ports by disconnecting all FW devices, shut down your Mac and unplug it from AC power (wall socket) for 30 minutes. plug it back in and try FW.
If that didn't work, download the combo update from this site (yours may be corrupt), not Software Update, disconnect all firewire + USB devices except keyboard + mouse, Repair Permissions, re-install update, Repair Permissions again + try.
If that still didn't get it Zap the PRAM. While restarting Mac hold down the following key combo Command-Option-P-R. Keep holding those keys down till you hear the second start-up chime, then release.
A bad internal PRAM battery can also cause FireWire to not be recognized, so make sure it's good!
Also, here is Apple doc.#88338 on getting FireWire to work.
Here's another Fw Faq.
DALE

External Drive does not mount with Firewire but is ok with USB !

Similar Messages

Maybe you are looking for