External drive for MAC and PC?

My client wants to be able to view all the .mov files I've shot for them and due to file sizes, I need to deliver them all on a hard drive.
Is there any easy fix on my end or their end to facilitate this?
Thanks!

I was assuming that with Quicktime they'd be able to view full size .mov files
QuickTime .mov is a container, the video inside could have been made with any one of a number of codecs. If they do not have that particular codec, they won't be able to play the video. Not even all Macs have the same codecs, many are installed by FCP and unavailable elsewhere.
Also - do you know someone that has had success with MacDrive 8 on a PC?
It goes exactly what it says on the tin. Another alternative is for you to install the MacFuse/NTFS 3G package, which will enable your Mac to write files to a Windows NTFS formatted drive.

Similar Messages

How to format an external drive for mac AND pc use

i want to format my external drive so i can use it on my mac and on pc's as well. i've gathered that the MS-DOS format is the way to go. my question is this: would this create any problems for my mac then?
can i partion one part for ms-dos and part for macos extended?
cheers
-j-

MS-DOS format (or FAT32) will be fine for both Mac and PC. However there is a 4GB file size limit with FAT32.
You could use a dual partition, however the HFS+ partition would not be readable by the PC unless you installed the third party MacDrive.
Look at this page for more information on a dual partition drive for Mac and Windows.
http://macosxhints.com/article.php?story=20030613121738812
iFelix

How to format external drive for mac AND pc use

hi
i want to format my external drive so i can use it on my mac and on pc's as well. i've gathered that the MS-DOS format is the way to go. my question is this: would this create any problems for my mac then?
can i partion one part for ms-dos and part for macos extended?
cheers
-j-

There are a couple of disadvantages with formatting a
disk as FAT32. Firstly, there is a limit on the file
size for FAT32. I think it like 2 GB so if you
capturing video the results will probably not fit
into this file limit. Secondly FAT32 will not be
bootable. I alway clone my system to a backup disk as
bootable. That way if anything goes wrong with my
system, I can just boot from my backup disk and fix
it.
The problem with doing this though is that the drive will not be usable with Windows (which was in the original posting) unless you use the third party MacDrive software on the PC.
iFelix

Format external drive for Mac and PC?

Can I format an external Drive to have 1 partition for OS X and another for my wife to use with her PC?
thanks!
ray

Yes, just use Disk Utility under OS X to create two volumes on it, one Mac OS Ext, the other FAT. Use a Master Boot Record partition scheme (also known as “fdisk”).

New external drive for mac and windows

Hello,
I am looking to buy a 500gb maxtor external drive. Partition it 250gb for winxp and 250gb for my imac. I am really looking to make these drives as backup drives. I currently have an old 250gb (not all used) formatted as os x entended. I use it for all my itunes, photos, movies... photoshop, you get the picture... I just want to drag and drop to that drive. The same for my windows.
Does this sound correct? Has anyone done it this way?
Another way, would be to have it formatted for windows and drop and drag into two different folders : win and imac. But then I will be losing the naming conventions from the os x? isn't that why and want to use os x extended?
Thanks for all ideas,
Charlie

Piece of cake!
For those who want to know:
usb connection to imac first. I started disk utility. Split the partition to two parts and formated only one partition as OS X extended. After done, copied my directories as a bkup.
usb connection to windows. I started computer management and saw that the usb disk had two partitions: the first was healthy but unknown. That was ok, I wanted the second partition to be NTFS and formated. Then copied my directories to that drive as well.
Connected back the imac and saw both partitions, imacbkup and winbkup. I forgot, just like what I do with the imac and winxp, I can see the c: drive via the mac.
Very cool and easy. Maxtor drives are very reliable and easy to use.
Thanks,
Charlie Cooperman
If anyone wants more detail info, you can email me at [email protected]

Formatted External drive for Mac OS extended

Hi,
I actually change from windows to Mac (no comparison...!!) but trying to transfer my photos (Pictures in finder) to an external hard disk i can`t drag and drop and i do not know why....i read in one forume that i have to formatted the external drive for Mac OS extended. First question: how could i do that? if my hard disk was originally formatted for windows, do i lose the info when i formatted?
Thanks!!

You will lose the files on the HD when you reformat it. So copy what you want off the drive to a folder on your Mac temporarily.
select the HD on the Desktop and launch Disk Utility.
select the HD in the left hand page of DU.
click on the Partiton button
select 1 Partition
select OS X Extended (journaled) in the drop down Format menu.
click on the Apply button
drag the folder of files onto the EHD to copy back and then delete from your Mac's drive after verifying that they all copied back successfully.
OT

Best way to format my 16GB flash drive for Mac and PC transferring large power point files?

best way to format my 16GB flash drive for Mac and PC transferring large power point files?

format flash drive in Exfat for transferring files between Mac and Pc.
FORMAT TYPES
FAT32 (File Allocation Table)
Read/Write FAT32 from both native Windows and native Mac OS X.
Maximum file size: 4GB.
Maximum volume size: 2TB
You can use this format if you share the drive between Mac OS X and Windows computers and have no files larger than 4GB.
NTFS (Windows NT File System)
Read/Write NTFS from native Windows.
Read only NTFS from native Mac OS X
To Read/Write/Format NTFS from Mac OS X, here are some alternatives:
For Mac OS X 10.4 or later (32 or 64-bit), install Paragon (approx $20) (Best Choice for Lion)
Native NTFS support can be enabled in Snow Leopard and Lion, but is not advisable, due to instability.
AirPort Extreme (802.11n) and Time Capsule do not support NTFS
Maximum file size: 16 TB
Maximum volume size: 256TB
You can use this format if you routinely share a drive with multiple Windows systems.
HFS+ ((((MAC FORMAT)))) (Hierarchical File System, a.k.a. Mac OS Extended (Journaled) Don't use case-sensitive)
Read/Write HFS+ from native Mac OS X
Required for Time Machine or Carbon Copy Cloner or SuperDuper! backups of Mac internal hard drive.
To Read HFS+ (but not Write) from Windows, Install HFSExplorer
Maximum file size: 8EiB
Maximum volume size: 8EiB
You can use this format if you only use the drive with Mac OS X, or use it for backups of your Mac OS X internal drive, or if you only share it with one Windows PC (with MacDrive installed on the PC)
EXFAT (FAT64)
Supported in Mac OS X only in 10.6.5 or later.
Not all Windows versions support exFAT.
exFAT (Extended File Allocation Table)
AirPort Extreme (802.11n) and Time Capsule do not support exFAT
Maximum file size: 16 EiB
Maximum volume size: 64 ZiB
You can use this format if it is supported by all computers with which you intend to share the drive. See "disadvantages" for details.

How to use an external drive for windows and mac

I recently got an external hard drive (2 TB seagate expansion) and I need to be able to use it with both my mac and my windows computer. I have read numerous forums and tried downloading various third party programs but nothing seems to work! One of the things i have read was to create a partition on the drive, this is easy enough and i did try it so i do have one side i can add stuff from from windows and one side i can add stuff to from my mac but then i cant access the other side. So say i need to get a file from my mac to my windows. I add a file to the mac side of the partition from my mac but then when i plug it into windows i cant retrieve that because its on the mac side of the partition (and vis versa). Is there some sort of easy way around this? or some way in which i can format the drive where i can move files back and forth from windows to mac without any expensive third party programs?
Thanks!
Bryan
PS. I did notice when i originally got the hard drive i had a bunch of files on it that were added from windows. When i plugged it into my mac i could see and copy these files but i could not add new files. Is there anyway to get around this "read only" type formate if i were to reset my drive back to its factory settings?

Three ways to go;
Repartiton the drive (1 partition) as MBR and with FAT32 file system. This is readable and writable by both Mac and Windows, but has a file size limit (which I think is 4GB).
The alternative is to leave the drive formatted as NTFS for Windows (this is not normally writeable from Mac) and employ a third-party software application which can write to NTFS. NTFS-3G, Paragons NTFS for Mac and Tuxera NTFS have all been recommended elsewhere.
Or you can repartition as GUID with HFS+ (Mac OS Extended Journalled) file system. This would not normally be accesible to the Windows machine, but once again there is 3rd-party softwsre available to enable Windows to read and write to it. MacDrive is the only one I'm aware of, but there are probably others.

Can i use my external drive for TM and files i don't want on my mac HD

my hard drive has a total of 232.57g which is not nearly enough space to save all my pictures, movies, etc. i've been using a 300g external drive to save my pictures, movies, etc. which is now full so i bought a maxtor one touch 4 750g to hopefully back up my computer using time machine, my 300g external drive, and whatever new pictures, movies, etc.
if i set up my new external drive for time machine can i still put the pictures, movies from my 300g external drive and whatever new pictures, movies, etc. on my new 750g external drive?
do i need to make a partition? if so can you tell me how?
should i not use time machine?
any information is appreciated

mac HD
capacity: 232.57g
available: 170.29g
iomega
capacity: 298.02g
available: 14.29g
one touch 4
capacity: 698.51g
available: 698.36g
thanks for the quick reply but i need to explain it better or ask, once all is backed up from my mac HD and my iomega external drive to my new one touch 4 i want to stop using the iomega since there isn't much room left on it
will i be able to add files directly to the one touch 4 without having those files saved to my mac HD like i do now?
or will TM remove my files the next time it backs up my mac HD since i won't have the iomega on anymore?

Use external drive for windows and mac

Hello,
I just bought a external 320Gb Western Digital Drive. I would like to use
the drive for windows and mac.I will not like to make partation on the drive
to use it on both operating systems. Is there any formating system with which i can use in both operating systems? I would like to use time machine feature on that drive also.
Thanx.

If you want to use a disk for both PC/Mac file storage and Time Machine, you will have to create two partitions. Partitioning is sort of like creating multiple virtual disks on the same physical disk. One partition should be formatted for PC (which the Mac can also use) and the other should be formatted for HFS+ (Mac only) which is what Time Machine requires. The Disk Utility application makes partitioning and formatting very easy.

How to partition my drive for Mac and XP use? from a novice

I would like to use my MacBook Pro for both Mac ad PC programs (Office and others) and hear that I can partition the drive. How is the best way to do that? Also I have an external Seagate FreeAgent GoFlex external drive to set up that supposedly can back up both Mac and PC without formatting each time. Do I have to partition the drive first? Do I use Time Machine?

Is it your intent to run Windows programs on your computer? If so then this is more than simply a partitioning exercise.
In order to use an external drive on both Macs and PCs there are two options. Option One is to partition and format the drive MBP and FAT32, respectively. OS X can read/write a FAT32 formatted drive. However, due to filesystem differences some features of the OS X filesystem are not supported by FAT32, so FAT32 is not the best choice for transferring OS X documents, but would be fine for transferring Windows documents.
Option Two is to partition the drive using GUID then creating two partitions. One partition is formatted Mac OS Extended, Journaled and the other partition is formatted FAT32. Each partition can be used for the data from the appropriate platform.
TM is not a file transfer program, cannot be used for Windows documents, and does not work on Windows.
If you wish to run Windows on your Mac then see the following:
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
1. Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak2, Vista, or Windows 7. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
2. Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
3. VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
4. CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
5. VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system.
See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows. You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

Can't format external drive for Mac

I got an external Seagate Freeagent 750GB drive to use with my new Mini. It came formatted as a windows FAT volume. Since I don't have a FW400 to FW 800 cable yet, I have it connected via USB. When I try to reformat as a Mac drive (with any of the 4 case-sensitive / journaled options), I get an error, but I can then reformat as FAT. Does anyone know how I can format this drive as mac and what the problem is?

It may have something to do with the partition scheme. There are at least three different schemes. One is used for windows formats (so you can use FAT32 or NTFS format), one is used for Intel Mac (probably GUID, not sure), and one is used for PowerPC Mac (probably the Apple Partition Map, again not sure). I don't know whether it is smart enough to choose the appropriate scheme for you when you have selected a format for your partition. Try to select the right scheme for Intel Mac first, and then decide on the format on each (if you have more than one partition on that disk) partitions.
I think you have to make sure the format is compatible with the scheme, especially when you have multiple partitions on one disk. You can't format one partition to FAT32 and another to HFS+, although it will try to do something, but it will end up with error.

Partitioning Drive for Mac and PC to deliver 10GB video file

I need to deliver several video files to a client on a drive.
Because some of the clips are over 10GB I cannot use the drive in its current FAT state.
I want / need the drive to be read by both Mac AND PC.
If this is the case, and I cannot use FAT, should I partition the drive into TWO partitions?
If so, should I then make one partition for Mac and the other for PC... then upload the video files twice, once to each partition?
Is there an alternative? How do I make the drive partitioned for both allowing the video to be ready by both Mac and PC.
Can I do what needs to be done using Disk Utility?
What 2 formats should I use? Is MS-DOS (FAT) the windows based partition, and is that the only one? And won't that not work for my issue of needing to load a file over 4 gigs?
What partition scheme do I want? It appears I can only use one partition scheme... or is this incorrect?
I'm using Mac OS X 10.5.5
Computer is Mac G5. Drive is the WD 250GB passport.
Thanks

If you format the drive as Microsft NTFS, there will be no problem with split files.
[NTFS-3G 2009.4.4 Driver|http://macntfs-3g.blogspot.com>
[Instructions|http://hem.bredband.net/catacombae/ntfs-3g/macntfs-3g_userguide.pd f] Be sure to read them!
The PC needs to be running Win NT, 2000, XP, Vista etc to read the NTFS format.

I want to format a Seagate Expansion External Hard Drive for Mac and PC

I ordered a Seagate Expansion 2 TB USB 3.0 Desktop External Hard Drive to use with my new Mac and my old PC (or at least get my photos off of both and put them on the drive). I thought all HDs could be formatted to use by both, I was able to get a Mac HD to work with my PC in 2008 (but it died). I am reading that this drive is PC only. I have Parallels and Windows 8 on my Mac if worse comes to worse but I would like all of my computers, real, virtual old and new to be able to access the external drive. Has anyone encountered this issue before? What should I format it in? FAT32? If yes, how would I go about that on a Mac. Or should I just return it?
I'm kind of Mac clueless. I spent my childhood through college on a Mac but I graduated right when OSX came around and I don't know how to work with the Mac "under the hood" like I did with OS9 and with Windows. So please talk to me like I am an an adult idiot.
Thanks!!!!

The optimum choice is to format it ExFAT, but do so on the PC, not the Mac. Alternatively, you can make two partitions - one for the Mac; one for the PC. Partition the drive using GUID when you make the two partitions. Format one using Mac OS Extended, Journaled. Format the other on your PC using NTFS if you won't need to write to it from the OS X side or use ExFAT if you do.
Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to two. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) you will use for Windows from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to MSDOS.
6. Click on the Erase button.
When you connect the drive to your PC reformat the PC volume to either NTFS or ExFAT.

External hard drive for Mac and Windows?

Hey all,
Is it possible to set up an external hard drive with a partition that has one side compatible with Mac and the other with Windows, similar to a Boot Camp setup on an internal drive? If so, how do I do that? Thanks for any advice you can give.

Rekishika:
Yes it is possible. Use Disk Utility from Leopard and partition the external drive to the desired space for each. Format one side with Mac HFS+ Journaled and the other with FAT32 (You can reformat the FAT32). You can also format both external partitions to FAT32 if you want Leopard and Windows to access (read and write)either one of them.
Axel F.

External drive for MAC and PC?

Similar Messages

Maybe you are looking for