External drive has different drive letter now, Lightroom catalog doesn't see it.

The problem started when I plugged in an additional external USB drive. The drive I use for my photos was labeled F:, now is labeled G:, even after removing the additional drive from the system. The catalog in LIghtroom still points to F:, which currently doesn't 'exist'. The physical drive is fine - Windows explorer sees all the files. I see two approaches to solving this, neither one of which I know how to do: (1) reassign the letter F; to the drive (2) repoint the catalog to G:.
Any and all input welcome!
Thanks,
Chris

Those are the two choices.
To change the drive letter, go to Google and type in
change drive letter Windows
To change where Lightroom finds the photos, see Adobe Lightroom - Find moved or missing files and folders

Similar Messages

Apple Mobile Device USB Driver has a driver problem MTP USB DEVICE ACCESS IS DENIED

I can't do anything i tried to update driver and nothing here is what all it says apple mobile device usb driver has a driver problem MTP usb device access is denied

DON'T DO ANYTHING LISTED BY APPLE SUPPORT.
Just try this -
Start computer in safe mode, go to device manager, locate Iphone, Ipod, or Apple Mobile Device Manager. Update/install driver in safe mode and - voila, successfully installed and no more access denied errors.

I can't download apps. I'm trying to use my debit/visa and it says there is a problem try again, I've tried and tried and I get nowhere my debit/visa has worked before and now I don't even see where I can select "none" as a payment option, anyone kno

I can't download apps. I'm trying to use my debit/visa and it says there is a problem try again, I've tried and tried and I get nowhere my debit/visa has worked before and now I don't even see where I can select "none" as a payment option, anyone know what to do?

iTunes Store: Accepted forms of payment
Apple accepts different payment methods in different countries.
follow the steps listed in the link to see, it may not let you use a debit card.

WPD FileSystem volume driver has a driver problem (code 10)

Hi,
My laptop is a window 7, I always use a D-Link modem for internet. Previously the modem was well working and with high speed, also there was no problem with connections. Few weeks i encountered a problem with connection in my modem.
I have tried to troubleshoot and discovered that there is a problem with WPD FileSystem Volume Driver, the device manager displays a message that it can't start with an error code 10 together with a yellow exclamation. When i try to proceed i get instruction
of uninstalling and re-installing the WPD FileSystem Volume Driver, the issue is that i get the option for uninstalling it but i don't know how to re-install it.
Please i need your help to solve this.
Regards,
Mkashiwa.

Hi,
After uninstall the driver from Device Manager, reboot your PC and let Windows automaticallly re-install the driver for you.
What is the result?
You can also take a look of this KB for code 10 error
Fix: "This device cannot start" Code 10 error in Device Manager in Windows
http://support.microsoft.com/kb/943104
Yolanda Zhu
TechNet Community Support

HT201343 mirroring works through my phone but only the sound works from my mac. It has worked before but now suddenly it doesn't

I can only get the sound going when mirroring through my macbook. it worked before but now suddenly only sound comes through. There's no problem mirroring my iphone or my ipad. then i get sound and picture. it must be a setting. what have i done and how do i sort it out?
when mirroring the screen just goes black.

I am having a similar problem, that has just started recently. I am on OS 10.5.8 with all security updates run. My Mail account is an IMAP account. When I check my mail through webmail on Safari, my new messages show up immediately. However, Mail does not show them. Clicking the "check mail" button does not bring them in. I have to quit Mail and re-start it, then the messages show.
I tried to implement Ernie's solution of turning off "Use IDLE". That command is ticked in my preferences, however it is greyed out and I can't change it. Why is that? If it helps, my IMAP path prefix is blank, I'm using port 133, and "use SSL" is not ticked. These are all default settings that I have used successfully for years and haven't fiddled with.

If I edit a photo in Photoshop Elements, I can't seem to re-import it back into Lightroom. If I open the relevant folder on my Mac the image is present, but Lightroom just doesn't "see" it at all.

For some reason, my (Mac) Lightroom 5 won't recognise images in folders on my Mac that I've edited in either Photoshop Elements or Perfect Effects 8. If I've previously imported images from a specific folder, Lightroom will show these as greyed-out images (as normal) but will not show other images I've subsequently saved in that folder. Similarly, if I, say, select three images from Lightroom to use the Photomerge option in Elements, the subsequent saved image won't be recognised by Lightroom.
I've tried moving locations, saving in umpteen different formats etc., but the problem persists. No problem importing existing images from either SD card or old folders on the computer.
It's very frustrating!

Ah-Ha! Right, think I've worked out the problem!
When I save a photo from Photoshop, I often place it on the desktop with a view to e-mailing it or posting it somewhere on the internet. I've just looked at the file that was supposedly saved as a .psd, but under "properties" it has no file extension. So I added the .psd and bingo, up it popped in the LR import window! I've since gone into Photoshop preferences & ticked it to add a file extension. That's really odd - I've never deselected that option but, hey ho, mystery solved.
Many thanks for your patience Mr Paige, I should have looked at this before. Put it down to advancing senility...

Installed the latest update, now Airport Utility doesn't see Airport

I ran the latest update, now my Airport Utility claims to not see my Airport Extreme although I'm still on my network.? Any suggestions before I completely reset the AE to factory settings and start over.

I purchased a new Airport Extreme last week, I run a home network with a G5 desktop and a G4 Laptop running 10.4.10. It took me a while to set it up as I entered the wrong password for my ISP SBCGlobal. After I finally had it going I had a couple of occasions where Airport Utility did not see Airport but I still had the solid green light on Airport. I am not sure what I did that resolved the problem but I know I did a restart one time and my Airport showed up. I may have also reset my base station and re-entered my info but I no longer have the problem.

Optical Drive Has Failed - Can I disable it, what's next?

My 2 year old Mac Mini's optical drive has failed.
I had finished importing a CD and went to eject it and all I heard was grinding and the CD would not come out. I tired everything under the sun to get the disk to eject with nothing working, so I took it to my local Apple Care Center.
Their diagnosis is the optical drive has failed. So now what?
1. They removed the CD, but my Optical Drive is still grinding and it is driving me crazy (the grinding is not continuous, but happens every 8 seconds to 10 seconds)! What can I do, can I somehow disable the Optical Drive so it won't continue grinding? I have reboot several times and nothing seems to satisfy/stop this grinding Optical Drive!
2. I guess I am going to have to buy an external Optical Drive (oh joy, more cash), can anyone tell me about life w/o an internal Optical Drive and using an external optical drive? Any suggestions on which model/features I should look for? ...besides one that uses FireWire, which is a must for me.
3. I have an external hard drive which I use to backup my Mac Mini. Now that I don't have an internal Optical Drive, are there any other safety issues I should be thinking about? How about booting the Mac Mini from a disk when it crashes without an internal Optical Drive?
I am totally frustrated at this point!
Cheers, Paul

Welcome to Apple Discussions!
With no disk in the optical drive, it should be almost entirely inactive (it would be expected to make some noise initially at bootup, but should not be active after that). It makes me wonder if the disk was removed correctly, or whether the drive is still 'latched' and thus 'thinks' a disk is in place. In this situation, I'd return the unit to the Apple Store and ask them to resolve the problem, since a failed drive should not create these symptoms.
For external drives, there are a number of good solutions - see http://eshop.macsales.com/shop/firewire/optical-drives/ for some examples, starting at around $72. There should be no issue with using an external, and indeed, you are likely to find that even the cheapest of those listed provide you with rather faster performance with rather less fussiness about media brands. You are right to want a FW drive, for best performance.
As long as the external optical is connected and powered, and a valid MacOS install disk inserted, there should be no problems booting to it if required - though you may have to hold the Option key down (Alt if you are using a PC keyboard) to get to the boot loader screen, rather than C to boot directly to the optical drive.

My computer doesn't see my external hard drive

Hello. I have a Power Mac G4, X10.4.6 and for a long time I've used it successfully with my hard drice - and Icecube 800 hard drive connected through a firewire cable. Now i just formated the intern hard disks and now the computer doesn't see the hard drive. The Icecube 800 doesn't require installation of any drivers and it still works perfectly on other computers. And there's nothing wrong with the ports because I can still connect my iPod. What do i do? Thank you, Sebastian.

It does. It may not call it "resetting the port", but this method is what resets the port:
"Tip: FireWire ports are keyed, which means the FireWire cable can only be inserted one way. Check that you are inserting the FireWire cable into the FireWire port in the correct orientation.
If the issue persists, try these steps:
1. Shut down the computer.
2. Disconnect all FireWire devices and all other cables, except the keyboard and mouse cable(s).
3. Disconnect the computer from the power outlet and wait for 3 to 5 minutes.
4. Plug the computer back in and turn it on.
5. Reconnect the FireWire device(s) (one at a time if there is more than one) and test. Test with each FireWire port if you have more than one."
If it isn't resetting the port properly, I think your port, cable, or controller is damaged.

Shared Lightroom Catalog???

I use Lightroom exclusively for my photos.   I initially used it with my desktop Mac (PowerPC G5) and then started using it also on my laptop (Macbook Pro). Both computers have all photos on external drives. There is a separate Lightroom catalog on each computer corresponding to each computer with it's individual external drive.   You can imagine my problem now, I'm sure. I have, effectively, TWO Lightroom catalogs, each with unique images, but also I've copied some photos over between them. The problem is growing exponentially.
Here's what I'd LIKE to do.   I'd like to install a shared NAS drive (perhaps an Apple Time Capsule drive) on my central hub in my house (my whole house is wired for Ethernet so that's not a problem), then put all photos on that single hub, thereby using a single Lightroom catalog and with it's images from either computer. If I have to travel somewhere and take some photos with me, I can deal with that because that it is typically the exception, not the rule.
Has anyone tried to do this?   I don't need to nor expect to hit the shared catalog from both computers at the same time. I'll be using one or the other, but not both. But I'd like to bring these two environments together.
I'd love some insight from forum members who've attacked this problem and solved it. I just don't know if Lightroom will allow the catalog to be on a shared drive, thus accessed by either computer.    If it will, then I imagine the work I need to do is:
1)     create a large shared NAS drive.
2)     copy all images to that drive.
3)     pick one of the two Lightroom catalogs and make that the master and somehow point it to the NAS drive.
4)     import the remainder of the photos on the NAS drive to Lightroom.
5)     make sure that both computers reference the Lightroom catalog on the NAS drive.
or maybe not. Maybe there's a better way. I'd like your input.
if this won't work, then has anyone successfully merged two Lightroom catalogs together.   One of my catalogs has about 80,000 images, and the other about 35,000 images.   At least 50% of all images are keyworded and I'd really hate to lose my keywords and collections that I've created.
anyway, insight is welcome. Tell me if I'm nuts too.
Thanks in advance.
Dennis

The closest think to this that will work is to put all the images on a large Firewire 800 drive with the LR catalog on the same drive, possibly in another partition. And alternately plug the drive into one machin or the other.
It is Networked drives where one can't put a Catalog, as John says.
Don

HT201250 Migration assistant doesn't see my external disk although it's connected and turned on. What should I do?

I had to reformat my HD. Now I'm trying to restore from my Time Machine, back up external disk using Migration Assistant. The M.Assitant doesn't see my external disk though it's connected and turned on. What should I do?

See Here for > Frozen or unresponsive iPhone
Try this First...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
More Info here > https://discussions.apple.com/message/19521062

HT201625 All my media is on a portable hard drive. The drive letter has changed, and now my library cannot locate anything. Is there a quick way to re-link the library to the new drive location?

All my media is on a portable hard drive. I installed Itunes on a new computer, and scanned the portable hard drive, thus creating a new library on the new computer. The portable drive now has a different drive letter. Now, the library cannot locate any of the songs because when it was created it (I assume) linked to the other drive letter. Now, from what I understand, I can select a (song, album etc) and then browse to the new location. But I have thousands of songs.
I need a way to re-identify as the whole group. And because this is a portable hard drive, this could happen on a daily basis, so I know there must be some other process I am missing. I guess I could delete the library and rescan the drive and create a new library every time I reconnect the hard drive, but that seems inefficient and time consuming. Oh, Windows 8.1 and Itunes 12.1.1.4, if that matters.
Am I missing some simple step to this?

See turingtest2's user tip on Make a split library portable - the best approach is to have the complete library (database, artwork, etc. as well as media) on the external drive. This layout is not only robust against changes in drive letters, but also means that the external drive can be used with any system running iTunes - just hold down SHIFT while starting iTunes and select the library on the external drive.
A quick fix, of course, is to use Windows' Disk Management facilities to reset the external HDD's drive letter to match the locations stored in the iTunes database.

Hi, I have a macbook pro with a new hard drive installed. My WD external drive backup on time machine now wont let me access the files. I get a prompt saying 'you do not have permission to access the files'

hi, I have a macbook pro with a new hard drive installed and restored. My WD external drive backup on time machine now wont let me access the files. I get a prompt saying 'you do not have permission to access the files' After my new drive was installed I plugged in time machine and it started backing up. I paused it when I realised that it was running for more than a few minutes. I now realise that it probably started backing up the new hard drive all over again. Which makes me think that the original back up must be on the WD back I cant seem to access it. Any ideas would be helpful.

See E-10 in the first link.
Time Machine Troubleshooting
Time Machine Troubleshooting Problems

External hard drive renamed, now lightroom does not see my files

I have been putting all my pictures in a folder on my external hard drive and then pulling them into Lightroom as they are added. The external HD was named (J:). I just went on vacation and decided to take a laptop and my hard drive along to work on photos. WHen I returned and plugged my hard drive back in to my regular desktop it showed up as (L:). I tried to simply rename it, but that did not work. Lightroom does see any of my folders as they were all mapped to the (J:) drive.
Any ideas?
Unicorn 2525

Right click on the top level folder in Lightroom folder panel and choose Finder Missing Folder or Update Folder Location. The first usually only shows in your situation, but on occasions it might note, therefore the second should be enough. This linked tutorial should guide you through the remaining steps.
http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm

New hard drive in 2009 iMac has been installed and now I have a folder with a question mark displayed on start up.

I installed a Barracuda 500 gb drive. When I attempted a reinstall based off an external hard drive using time machine, it showed an error message of not being able to complete the back up. This was after I formatted the new drive using disc utility. I reformatted a different external drive and let it make several back ups. I then put the new drive into the machine and now I only get the folder with the question mark. It is a late 2009 iMac. The OS updates have been through the on line store and I do not have back up discs. Everything SHOULD be backed up on my external.

when you partition and format the new bare drive are you running off of an install disc in the optical drive? I have used the install disk for Leopard to access the Disc Utility (did not install Leapard, just used it to access the Disc Utility) as well as the machine prompting me to take action due to the new hard drive being recognized, again using disc utility and using the install disc provided by the hard drive manufacturer. All of these were done according to instruction as previously mentioned, on a reformatted and partitioned drive each time.
What OS version are you nstalling on the bare drive before you attempt to restore from your Time Machine backup? I have not installed any OS on the bare drive. I do not have a copy of Lion 10.7.5 as I purchased it through the app store. I was under the impression I could reinstall all the data through Time Machine but that is proving elusive - frustrating.
Are you trying to use the Time Machine "star wars" interface to restore or are you using Migration Assistant? I am not using migration assistant. I have been using the Time Machine restore application.

External drive has different drive letter now, Lightroom catalog doesn't see it.

Similar Messages

Maybe you are looking for