External drive not found
For some reason, both of my LaCie external hardrives and my external DVD burner won't mount on the desktop. I need to take files off of my computer cause the start up disk is almost full but if nothing will mount on the desktop how can i get my files off?
How do I get the drives to show up?
Hi! If the DU can't see the drive the firewire/usb bus may be tripped out. Resetting the pmu may get it working again. It's unlikely that several drives would all fail at the same time. Some early g%'s had the pmu/smu reset button but the latter ones require unhooking everything and letting them site for 15-30 minutes to reset the pmu/smu. Tom
Similar Messages
-
Firewire 800 external drive not found!
My power went out last night, so this morning my external drive is not on my desktop. It isn't read by my computer. I tried it on my other G5 and it reads it, but for some reason it won't show up on this one. Could my settings be screwed up? Please help! I'm not a mac genius yet.
shaneA. buy a UPS
B. Unplug your G5, your FW cable, power to the FW case.
C. Let sit for 15 minutes.
If it won't show up now, try either SMU/PMU reset, or reset nvram in Open Firmware.
FW seems to be very iffy when left on. I have found it best to unmount and power off when not in use (though FW800 seems better behaved). SATA doesn't have the problems fw does.
When you had it show on the 2nd G5, did you check it out with Disk Utility? -
Can some one help me with diagnostic test result " apple mobile device driver not found"?
I bought an iPhone 4gs 32gb from Singapore. iso 4. I'm living in Chennai, India. To connect it to my computer (windows XP,), I have downloaded iTunes 10.6.1.7. Unfortunately iTunes is not recognizing my iPhone. I had tried to troubleshoot it by reinstalling iTunes (2 times). I have restarted the apple mobile device from control panel. I try connecting my iphone in another usb port. but no use. I don't know what am I missing?. iTunes opens on my computer. but doesn't recognize my device. when I click on help. it says an "unknown error has occurred. your computer is not connected to internet. please check your internet connection and try again later". I don't know what to do? could you please help me? thank you so much for your help and time.
when I update the usb driver (C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.Double-click the usbaapl file.) I followed the procedure from this site. http://support.apple.com/kb/TS1538 when I finished, it says "the specified location does not contain information about your software"
I did the apple's diagnostics test on my computer. I'm pasting the result for your info.
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
System manufacturer System Product Name
iTunes 10.6.3.25
QuickTime not available
FairPlay 1.14.43
Apple Application Support 2.1.9
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.2.0.6
Apple Mobile Device Driver not found.
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0013AC2C08548378
Current user is an administrator.
The current local date and time is 2012-06-28 15:23:45.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel(R) G41 Express Chipset
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {D85300A1-330D-41ED-AC5A-EC032B22FBF0}
Description: Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller - Packet Scheduler Miniport
IP Address: 192.168.1.3
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Thu Jun 28 15:17:19 2012
Lease Expires: Fri Jun 29 03:17:19 2012
DNS Servers: 192.168.1.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Basic connection to the store failed.
The network connection timed out.
Connection attempt to Gracenote server was successful.
The network connection timed out.
iTunes has never successfully accessed the iTunes Store.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
G: Optiarc DVD RW AD-7220A, Rev 1.01
Drive is empty.
**** Device Connectivity Tests ****
iPodService 10.6.3.25 is currently running.
iTunesHelper 10.6.3.25 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) N10/ICH7 Family USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.I have the same problem. I think that someone tried my iphone before me because when I want to reset it, I'm invited to enter a password that I didn't set. Also, when I go the Map application, the iphone indicate that I'm locateded in China while I'm in Tunisia. Now, I can't connect to my iphone to itunes, and I can't reset it because it ask me to enter a password that I didn't set.
This is my post:
https://discussions.apple.com/thread/4063223
Please, we need your help. -
My roommate gave me an old iPod Mini a few days ago. It was working fine 'til I plugged it into my computer and it asked me to format it. I did, and now it cannot be recognized by iTunes or my computer. My computer views it as a "removable disk" which cannot be accessed. In devices, it is listed as an Apple iPod though, so I'm hoping not all is lost. I have tried many quick fixes I've read on internet (including changing disk letter) but to no avail. I have reinstalled the new iTunes and now that is telling me it has not installed properly, and when I ran diagnostics, it reads that the Apple Mobile Device Driver not found. I will copy & paste all the info from the diagnostic run below, and if anybody can help me with my new (old) iPod, I'd be everly greatful!
Thanks!!
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
TOSHIBA Satellite L775D
iTunes 11.0.1.12
QuickTime 7.7.3
FairPlay 2.2.32
Apple Application Support 2.3.2
iPod Updater Library 10.0d2
CD Driver Not Available
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.0.1.3
Apple Mobile Device Driver not found.
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number
Current user is not an administrator.
The current local date and time is 2013-01-08 11:16:27.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., AMD Radeon(TM) HD 6520G
**** External Plug-ins Information ****
No external plug-ins installed.
**** Device Connectivity Tests ****
iPodService 11.0.1.12 (x64) is currently running.
iTunesHelper 11.0.1.12 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Standard OpenHCD USB Host Controller. Device is working properly.
Standard Enhanced PCI to USB Host Controller. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Most Recent Devices Not Currently Connected:
iPod mini running firmware version 1.4.1
Serial Number: JQ******S42
<Edited By Host>OMG same thing here; rather annoyed and now have set up accounts on 2 comps(both 64 vista ultimate); about to try my 32 bit vista on my lappy; we'll see... i don;t have high hopes thoush.
What i knew about iPhone before buying it:
What You Need
To use iPhone, you need:
A new two-year wireless service plan with AT&T
A Mac or a PC with a USB 2.0 port and one of the following operating systems:
Mac OS X version10.4.10 or later
Windows XP Home or Professional with Service Pack 2 or later
Windows Vista Home Premium, Business, Enterprise, or Ultimate edition
iTunes 7.3 or later, available at www.itunes.com
An iTunes Store account
An Internet connection
You must be at least 18 years old to open a new AT&T wireless account. You will need a
major credit card to open a new iTunes Store account.
Yeahyeah check all that stuff;
Oh well; just when i thought i'd finally cross over to the beautiful packaging of APPLE. I remember in design school that form follows function. Thanks.
Windows Vista -
USB External drive not showing in Finder, or on Desktop
I have two USB external drives from the same manufacturer. One is for regular storage, the second is for Time Machine and movies.
The first one shows everywhere, on the desktop, in finder and in Disk Utility.
The second drive shows in Disk Utility only. However, it is functioning fine with Time Machine. So it is mounted. I have tried several repairs, and it reports no fault found. So it is certainly functioning correctly, but a setting or error in the operating system is not allowing it to be viewed in finder, or on the desktop.
Any suggestions.Correction: Title should be Firewire External drive not showing in Finder, or on Desktop.
-
Apple Mobile Device Driver not found. ...
Nor Itunes neither my PC can view my Iphone, what is more, it is completely discharged.. Here's the diagnostics...
iTunes 10.3.1.55
QuickTime 7.6.9
FairPlay 1.11.17
Apple Application Support 1.5.2
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.1.2
Apple Mobile Device Driver not found.
Bonjour 2.0.5.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 0012B2100AAF8C28
Current user is not an administrator.
The current local date and time is 2011-06-30 20:40:04.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce GT 220M
**** External Plug-ins Information ****
Plug-in Name: MiniLyrics Visualizer
Plug-in Loaded: Yes
Plug-in Version: 0.8
Plug-in File Version: Unknown
Plug-in Path: C:\Program Files\iTunes\Plug-ins\iTunesMinilyrics.dll
Plug-in Name: Last.fm AudioScrobbler
Plug-in Loaded: Yes
Plug-in Version: 1.0.4
Plug-in File Version: 3.0.4.0
Plug-in Path: C:\Program Files\iTunes\Plug-ins\itw_scrobbler.dll
Genius ID: 46b8dbeb48d2ea73f185160d9ef3debd
**** Device Connectivity Tests ****
iPodService 10.3.1.55 is currently running.
iTunesHelper 10.3.1.55 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Note: I simply unnistalled all apple programms, when my Iphone had errors, and installed the newer version... Maybe it is the reason why my Iphone is not being seen...I have the same problem. I think that someone tried my iphone before me because when I want to reset it, I'm invited to enter a password that I didn't set. Also, when I go the Map application, the iphone indicate that I'm locateded in China while I'm in Tunisia. Now, I can't connect to my iphone to itunes, and I can't reset it because it ask me to enter a password that I didn't set.
This is my post:
https://discussions.apple.com/thread/4063223
Please, we need your help. -
JDBC Driver not found when connecting to Data Federator XI 3.0 SP3
Hello,
I am trying to connect Crystal 2008 to Data Federator however I am getting the Error
Failed to open connection.
Details: JDBC Driver not found.
The JDBC Drivers are installed and working for the Universe Designer, however I am unable to get it working for Crystal. I am using the following connection parameters on Crystal:
Connection URL: jdbc:datafederator://<<servername>>:3055/<<catalog>>
Database Classname: com.businessobjects.datafederator.jdbc.DataFederatorDriver
Any Advice on what I may have missed?The issue was solved, thanks to Patric Wan:
u201CFailed to open the connection. Details: JDBC driver not found.u201D
This means Data Federator JDBC driver was not added to:
C:\Program Files\Business Objects\common\<version>\java\CRConfig.xml
How to connect the Data Federator Server using JDBC?
1. Retrieve the following files from the machine where Data Federator is installed, from the directory [data-federator-installation-dir]/JdbcDriver/lib.
- thindriver.jar
- avalon-framework-4.1.5.jar
- jacorb.jar
- log4j-1.2.8.jar
- logkit-1.2.jar
2. Copy these files to a directory of your choice ([your-jdbc-driverdirectory]).
3. Add [your-jdbc-driver-directory]/thindriver.jar to CRConfig.xml <Add to Classpath tag, you can refer to original sample.CRConfig.xml should be at: C:\Program Files\Business Objects\Common\4.0\java\CRConfig.xml, or search your BOBJ products install to find this file>
4. URL: jdbc:leselect://<host>[:<port>][/[<catalog>]][[;param-name=value]*]
Class Name : LeSelect.ThinDriver.ThinDriver
Edited by: Craig Sander on Feb 12, 2011 8:22 PM -
I have my Time Machine on an external drive (not connected to Airport Extreme) and I have an external HD attached to airport extreme. Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme. How?
Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme.
Sorry, but no.
Time Machine will backup your Mac, but not the hard drive attached to the AirPort Extreme.
Time Machine will back up a hard drive only if it is attached directly to your Mac via USB or FireWire. -
Windows 7 install stops at "CD/DVD driver not found"
When trying to install Windows 7 with boot camp, all goes well until it stops and gives me the "CD/DVD driver not found". I have a mid 2010 Mac Pro with a 500 GB SSD drive. I have burned a DVD at 1X from a iso file.
ThanksCan you verify the MD5/SHA1 of the DVD with the ISO using OS X 'openssl md5' or the M$ FCIV tool? The source of your ISO should be able to provide MD5/SHA1.
OS X Example
openssl md5 ~/Desktop/GRMCPRXVOL_EN_DVD.cdr
MD5(/Users/MyName/Desktop/GRMCPRXVOL_EN_DVD.cdr)= 977f4f0f1400be91855789213e07b031
Windows FCIV example
D:\>C:\"Program Files (x86)"\FCIV\fciv
// File Checksum Integrity Verifier version 2.05.
Usage: fciv.exe [Commands] <Options>
Commands: ( Default -add )
-add <file | dir> : Compute hash and send to output (default screen).
dir options:
-r : recursive.
-type : ex: -type *.exe.
-exc file: list of directories that should not be computed.
-wp : Without full path name. ( Default store full path)
-bp : specify base path to remove from full path name
-list : List entries in the database.
-v : Verify hashes.
: Option: -bp basepath.
-? -h -help : Extended Help.
Options:
-md5 | -sha1 | -both : Specify hashtype, default md5.
-xml db : Specify database format and name.
To display the MD5 hash of a file, type fciv.exe filename
D:\>C:\"Program Files (x86)"\FCIV\fciv -add Windows8.1-64bit.cdr
// File Checksum Integrity Verifier version 2.05.
f104b78019e86e74b149ae5e510f7be9 windows8.1-64bit.cdr -
Core Audio: Selected Driver not found. (-10202) error message and speakers don't work
Apple just replaced my hard drive and now I'm noticing that I have no sound coming out of my internal speakers or earphone jack. When I try to use garage band I get the following error message:
Core Audio:
Selected Driver not found (-10202)
I read their article on the subject; I go to system preferences, sound then output devices where I'm supposed to select my device except there are none listed. I tried to fix the problem by reinstalling the operating system using the CD's that came with the MacBook Air but that didn't work either.
Here's the other problem, when I download the software update the update never loads. The status bar just sits there even when I let my pc alone over night.
Any suggestions??
FYI, i can't easily walk into a mac store for assistance.. gotta catch a plane to a different island.Update your Apogee and Symphony drivers to Mountain Lion versions...
But the bigger question is.. How did you install Mountain Lion on a G5? -
Drive not found in library database
Greetings.
I'm new to OSB and am having tape drive, volume problems.
File system backups only complete successfully when drive (IBM4_0_0_1_1) is used. When OSB attempts to use other drives in the library it logs the following errors listed in "Transcript".
I'm running OSB (10.4.0.3.0) on a Linux server (Oracle Linux Server release 6.0) with a SL500 library controller by a ACSLS(8.3.0) server.
Please advise.
Transcript:
2014/04/23.11:44:01 ______________________________________________________________________
2014/04/23.11:44:01
2014/04/23.11:44:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.11:44:01
2014/04/23.11:44:01 ---
2014/04/23.11:44:01 No volume could be found in SL500 (for drive HP6_0_0_3_1) to use for job admin/83.1.
2014/04/23.11:44:01 The problem using HP6_0_0_3_1 and the volume it contains, if any, is
2014/04/23.11:44:01 drive not found in library database (library manager)
2014/04/23.11:45:01 ______________________________________________________________________
2014/04/23.11:45:01
2014/04/23.11:45:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.11:45:01
2014/04/23.11:45:01 ---
2014/04/23.11:45:01 No volume could be found in SL500 (for drive HP5_0_0_2_4) to use for job admin/83.1.
2014/04/23.11:45:01 The problem using HP5_0_0_2_4 and the volume it contains, if any, is
2014/04/23.11:45:01 drive not found in library database (library manager)
2014/04/23.11:46:01 ______________________________________________________________________
2014/04/23.11:46:01
2014/04/23.11:46:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.11:46:01
2014/04/23.11:46:01 ---
2014/04/23.11:46:01 No volume could be found in SL500 (for drive IBM5_0_0_1_2) to use for job admin/83.1.
2014/04/23.11:46:01 The problem using IBM5_0_0_1_2 and the volume it contains, if any, is
2014/04/23.11:46:01 drive not found in library database (library manager)
2014/04/23.11:48:01 ______________________________________________________________________
2014/04/23.11:48:01
2014/04/23.11:48:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.11:48:01
2014/04/23.11:48:01 ---
2014/04/23.11:48:01 No volume could be found in SL500 (for drive HP4_0_0_2_2) to use for job admin/83.1.
2014/04/23.11:48:01 The problem using HP4_0_0_2_2 and the volume it contains, if any, is
2014/04/23.11:48:01 drive not found in library database (library manager)
2014/04/23.11:49:01 ______________________________________________________________________
2014/04/23.11:49:01
2014/04/23.11:49:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.11:49:01
2014/04/23.11:49:01 ---
2014/04/23.11:49:01 No volume could be found in SL500 (for drive IBM5_0_0_2_1) to use for job admin/83.1.
2014/04/23.11:49:01 The problem using IBM5_0_0_2_1 and the volume it contains, if any, is
2014/04/23.11:49:01 drive not found in library database (library manager)
2014/04/23.11:50:01 ______________________________________________________________________
2014/04/23.11:50:01
2014/04/23.11:50:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.11:50:01
2014/04/23.11:50:01 ---
2014/04/23.11:50:01 No volume could be found in SL500 (for drive HP5_0_0_2_3) to use for job admin/83.1.
2014/04/23.11:50:01 The problem using HP5_0_0_2_3 and the volume it contains, if any, is
2014/04/23.11:50:01 drive not found in library database (library manager)
2014/04/23.12:00:01 ______________________________________________________________________
2014/04/23.12:00:01
2014/04/23.12:00:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.12:00:01
2014/04/23.12:00:01 ---
2014/04/23.12:00:01 No volume could be found in SL500 (for drive HP6_0_0_3_1) to use for job admin/83.1.
2014/04/23.12:00:01 The problem using HP6_0_0_3_1 and the volume it contains, if any, is
2014/04/23.12:00:01 drive not found in library database (library manager)
2014/04/23.12:01:01 ______________________________________________________________________
2014/04/23.12:01:01
2014/04/23.12:01:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.12:01:01
2014/04/23.12:01:01 ---
2014/04/23.12:01:01 No volume could be found in SL500 (for drive HP5_0_0_2_4) to use for job admin/83.1.
2014/04/23.12:01:01 The problem using HP5_0_0_2_4 and the volume it contains, if any, is
2014/04/23.12:01:01 drive not found in library database (library manager)
2014/04/23.12:01:24 ______________________________________________________________________
2014/04/23.12:01:24
2014/04/23.12:01:24 Transcript for job admin/83.1 running on x4440a
2014/04/23.12:01:24
2014/04/23.12:01:25 ---
2014/04/23.12:01:25 No volume could be found in SL500 (for drive IBM5_0_0_1_2) to use for job admin/83.1.
2014/04/23.12:01:25 The problem using IBM5_0_0_1_2 and the volume it contains, if any, is
2014/04/23.12:01:25 drive not found in library database (library manager)
2014/04/23.12:04:01 ______________________________________________________________________
2014/04/23.12:04:01
2014/04/23.12:04:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.12:04:01
2014/04/23.12:04:01 ---
2014/04/23.12:04:01 No volume could be found in SL500 (for drive HP4_0_0_2_2) to use for job admin/83.1.
2014/04/23.12:04:01 The problem using HP4_0_0_2_2 and the volume it contains, if any, is
2014/04/23.12:04:01 drive not found in library database (library manager)
2014/04/23.12:05:01 ______________________________________________________________________
2014/04/23.12:05:01
2014/04/23.12:05:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.12:05:01
2014/04/23.12:05:01 ---
2014/04/23.12:05:01 No volume could be found in SL500 (for drive IBM5_0_0_2_1) to use for job admin/83.1.
2014/04/23.12:05:01 The problem using IBM5_0_0_2_1 and the volume it contains, if any, is
2014/04/23.12:05:01 drive not found in library database (library manager)
2014/04/23.12:05:21 ______________________________________________________________________
2014/04/23.12:05:21
2014/04/23.12:05:21 Transcript for job admin/83.1 running on x4440a
2014/04/23.12:05:21
Backup started on Wed Apr 23 2014 at 12:05:51
Volume label:
Volume tag: LEV018
Volume UUID: 203f144a-ad72-1031-9e4c-002128001bbe
Volume ID: mf_2min-000025
Volume sequence: 1
Volume set owner: root
Volume set created: Wed Apr 23 12:05:51 2014
Volume set expires: Wed Apr 23 12:07:51 2014
Media family: mf_2min
Original UUID: 203f144a-ad72-1031-9e4c-002128001bbe
Archive label:
File number: 1
File section: 1
Owner: root
Client host: x4440a
Backup level: 0
S/w compression: no
Archive created: Wed Apr 23 12:05:51 2014
Encryption: off
Dumping all files in /etc
Backup complete on Wed Apr 23 2014 at 12:06:03
Backup statistics:
status 0
devices IBM4_0_0_1_1
devices 1
volumes mf_2min-000025
voltags LEV018
file 1
host x4440a
encryption off
start_time Wed Apr 23 2014 at 12:05:51 (1398276351)
end_time Wed Apr 23 2014 at 12:06:06 (1398276366)
backup_time Wed Apr 23 2014 at 12:05:51 (1398276351)
entries_scanned 3373
kbytes_scanned 40556
entries_excluded 0
entries_skipped 0
mount_points_skipped 0
files 2047
directories 315
hardlinks 0
symlinks 1011
sparse_files 0
filesys_errors 0
unknown_type 0
file_kbytes 39264
dev_kbytes 35977
dev_iosecs 2
dev_iorate 18.4 MB/S
wrt_iosecs 15
wrt_iorate 2.5 MB/S
physical_blks_written 1102
write_errors 0
physical_blks_read 2
read_errors 0
error_rate 0%
path /etc completed, status 0
[root@x4440a backup]# obtool lsdev -lvg
SL500:
Device type: library (ACSLS)
In service: yes
Debug mode: no
Barcode reader: yes
Barcodes required: yes
Unload required: yes
Ejection type: auto
Min writable volumes: 0
UUID: e0b58224-a1a4-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
ACSLS server: v215f
ACSLS port: 0
ACS id: 0
ACSLS access id: acsss
Reservation 1:
Component: obacslibd
Host: x4440a
Process: 32195
Element counts / addresses:
10 mte: 1 - 10
281 se : 1 - 281
1 iee: 1
1 dte: 1
Moves:
From mte, to: mte 0 se 0 iee 0 dte 0
From se, to: mte 0 se 0 iee 1 dte 1
From iee, to: mte 0 se 0 iee 0 dte 0
From dte, to: mte 0 se 1 iee 0 dte 0
Ok_ops: move=1, reserve=1 sense_dev=1, sense_ele=0, unload_any=1, sense_dev_range=0
State of barcode reader: enabled
IBM4_0_0_1_1:
Device type: tape (ACSLS)
In service: yes
Library: SL500
LSM: 0
Panel: 1
Drive: 1
Automount: yes
Error rate: 8
Query frequency: 131072KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Drive usage: 14 minutes, 58 seconds
UUID: 179eb954-a1a5-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
Raw device: /dev/sg18
Connection type: SCSI
Inquiry data:
Vendor: IBM
Product: ULTRIUM-TD4
Firmware: C7Q0
Serial number: 1310127325
Tape state: offline
Hardware compression: on
Last read was: uncompressed
Hardware encryption: available
Maximum block size: 2097152
IBM5_0_0_2_1:
Device type: tape (ACSLS)
In service: yes
Library: SL500
LSM: 0
Panel: 2
Drive: 1
Automount: yes
Error rate: 8
Query frequency: 131072KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Drive usage: [not set]
UUID: 7498ff66-a1a5-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
Raw device: /dev/sg16
Connection type: SCSI
Inquiry data:
Vendor: IBM
Product: ULTRIUM-TD5
Firmware: D8D4
Serial number: 1168002114
Tape state: offline
Hardware compression: on
Last read was: uncompressed
Hardware encryption: available
Maximum block size: 2097152
HP6_0_0_3_1:
Device type: tape (ACSLS)
In service: yes
Library: SL500
LSM: 0
Panel: 3
Drive: 1
Automount: yes
Error rate: 8
Query frequency: 131072KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Drive usage: [not set]
UUID: cd20d3fc-a1a5-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
Raw device: /dev/sg21
Connection type: SCSI
Inquiry data:
Vendor: HP
Product: Ultrium 6-SCSI
Firmware: J39S
Serial number: HU1233PPNN
Tape state: offline
Hardware compression: on
Last read was: uncompressed
Hardware encryption: available
Maximum block size: 2097152
IBM5_0_0_1_2:
Device type: tape (ACSLS)
In service: yes
Library: SL500
LSM: 0
Panel: 1
Drive: 2
Automount: yes
Error rate: 8
Query frequency: 131072KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Drive usage: [not set]
UUID: 5b6cf420-a1a5-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
Raw device: /dev/sg15
Connection type: SCSI
Inquiry data:
Vendor: IBM
Product: ULTRIUM-TD5
Firmware: D8D4
Serial number: 1068002447
Tape state: offline
Hardware compression: on
Last read was: uncompressed
Hardware encryption: available
Maximum block size: 2097152
HP4_0_0_2_2:
Device type: tape (ACSLS)
In service: yes
Library: SL500
LSM: 0
Panel: 2
Drive: 2
Automount: yes
Error rate: 8
Query frequency: 131072KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Drive usage: [not set]
UUID: 8bd3659a-a1a5-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
Raw device: /dev/sg13
Connection type: SCSI
Inquiry data:
Vendor: HP
Product: Ultrium 4-SCSI
Firmware: H64S
Serial number: HU1803168E
Tape state: offline
Hardware compression: on
Last read was: uncompressed
Hardware encryption: not available
Maximum block size: 2097152
HP5_0_0_2_3:
Device type: tape (ACSLS)
In service: yes
Library: SL500
LSM: 0
Panel: 2
Drive: 3
Automount: yes
Error rate: 8
Query frequency: 131072KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Drive usage: [not set]
UUID: 9ee7dbd4-a1a5-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
Raw device: /dev/sg23
Connection type: SCSI
Inquiry data:
Vendor: HP
Product: Ultrium 5-SCSI
Firmware: I67S
Serial number: HU19477NFE
Tape state: offline
Hardware compression: on
Last read was: uncompressed
Hardware encryption: not available
Maximum block size: 2097152
HP5_0_0_2_4:
Device type: tape (ACSLS)
In service: yes
Library: SL500
LSM: 0
Panel: 2
Drive: 4
Automount: yes
Error rate: 8
Query frequency: 131072KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Drive usage: [not set]
UUID: b45b889e-a1a5-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
Raw device: /dev/sg24
Connection type: SCSI
Inquiry data:
Vendor: HP
Product: Ultrium 5-SCSI
Firmware: I67S
Serial number: HU19477NBF
Tape state: offline
Hardware compression: on
Last read was: uncompressed
Hardware encryption: available
Maximum block size: 2097152
[root@x4440a backup]#
[root@x4440a backup]# obtool lsvol -L SL500 -l
Inventory of library SL500:
in 1: barcode F50216, oid 100
in 2: barcode I50116, oid 101
in 3: barcode LEV008, oid 102, mediainfo hw encryptable
in 4: barcode LEV010, oid 103, mediainfo hw encryptable
in 5: barcode LEV017, oid 104, mediainfo hw encryptable
in 6: volume mf_2min-000025, barcode LEV018, oid 155, 781232128 kb remaining, expired, mediainfo hw encryptable
in 7: barcode LEV049, oid 106
in 8: barcode LEV058, oid 107
in 9: barcode PQ4196, oid 108
in 10: barcode PQ4883, oid 109
in 11: barcode S50282, oid 110
in 12: barcode S50290, oid 111
in 13: barcode S50291, oid 112
in 14: barcode S50292, oid 113
in 15: barcode S50300, oid 114
in 16: barcode S60111, oid 115
in 17: barcode S60113, oid 116
in 18: barcode SF6410, oid 117
in 19: barcode SF6411, oid 118
in 20: barcode SF6412, oid 119
in 21: barcode SF6413, oid 120
in 22: barcode SF6414, oid 121
in 23: barcode SF6416, oid 122
in 24: barcode SF6417, oid 123
in 25: barcode SF6418, oid 124
in 26: barcode SF6419, oid 125
in 27: vacant
in 28: vacant
in 29: vacant
in 30: vacant
in 31: vacant
in 274: vacant
in 275: vacant
in 276: vacant
in 277: vacant
in 278: vacant
in 279: vacant
in 280: vacant
in 281: vacant
in iee: vacant
in dte: vacant
[root@x4440a backup]#Rich
Thanks for your response.
ACSLS is part of the configuration requirements I need to have in this OBS environment.
I'm going to re install OBS just to see if anything changes.
Thanks again.
Update:
When configuring devices in OSB that are ACSLS in nature it is a requirement to restart the obacslibd after mkdev or certain chdev commands are preformed.
After the daemon was restarted I was able to use the attached tape drives. -
Why do I get a boot drive not found error only when laptop lid has been closed?
I've got a HP Mini 210 P/Number: VX818EA with Windows 7 Starter.
It works fine when turning on after shutdown, but when I've put it to sleep by closing the lid it won't 'wake up', and I get a blank screen. On restarting the computer I get a 'boot drive not found' error, (3F0) which can be resolved by following the steps on this page: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443463&tmp_task=solveCategory&lc=en&dlc=en&cc...
I've run disk check etc as suggested on that link, no errors are found, but nothing seems to resolve the problem more than temporarily. Seems odd that this only happens if I close the lid (sleep mode with the lid up is fine, doesn't crash the computer).
Can anyone advise?
ThanksHello,
Very strange, can you go to BIOS and reset the setting " By Default " ?. How did you check the disk ?
This is an unusual probleme Hp Mini 210 . And notice me after your reset the bios settings. -
after downloading osx 10.9.2 when i open my logic pro 9 and begin to audition loops that came with lp9 i get a message that says "audio device has been removed and then a second message the " select driver not found(-10202). my interface is a apogee duet. Can anyone provide a solution to this problem. Thanks
YES!!! YES!!! YES!!!
I got it!!! Yes!!!
Guys, I've solved my problem about that error -10202 (Selected driver not found).
I have installed in my Mac Pro (OS X 10.5.8) a document with an extension ".rsrc" to correct the position of the accents in my keyboard, like acute accent, tilde and circumflex.
That file is called "U.S. - International.rsrc" and it's stored in the following path:
"Macintosh HD/Library/Keyboard Layouts"
So, when it's properly installed, I can choose 2 country flags on the right side of the menu bar (U.S. - International and Brazilian).
That's the clue!
When I pick up "U.S. - International", my keyboard works fine with the accents, >>>BUT<<< Logic Pro 9 doesn't recognize my audio driver; and when I pick up "Brazilian", my keyboard doesn't work with the accents exactly as it shows me on each key, BUT Logic Pro 9 DOES recognize my audio driver.
So, when I want to write anything out, I will pick up the "US - International" and when I want to work on the Logic Pro 9, I will pick up "Brazilian".
I hope I can help all of you.
Regards,
Renato Veiga. -
Trying to update my itunes and its saying f drive not found
i have itunes and trying to upgrade it cause i just got 4s, when updating it says f drive not found. i dont even have a f drive. please help!
I'd try the following user tip with that one:
"Invalid Drive X:\" install errors -
Dotfuscator CE error: External type not found System.Windows.Input.ICommand,PresentationCore
Preemptive will not support CE so I am trying here...
I have an application targeting the .NET Framework 4.0. It builds and runs fine but I cannot get it to compile in Dotfuscator CE. I am stuck.
Dotfuscator CE (v5.0.2500.0) with Visual Studio 2010 SP1. Here is the Error:
Resolving method references...
External type not found System.Windows.Input.ICommand,PresentationCore, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35.
Build Error.
The problem seems to originate from ICommand being moved from PresentationCore.dll (in NET 4.0) to System.dll (in NET 4.5). Studio handles this and compiles fine as I am targeting NET 4.0 and the references all point to
C:\Program Files (x86)\Reference Assemblies\Microsoft\Framework\.NETFramework\v4.0\
Dotfuscator CE however does not seem to handle it correctly and I am not sure how to correct the issue. Any help would be greatly appreciated!!Hi Perter,
Thanks for your response.
External type not found System.Windows.Input.ICommand,PresentationCore, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35.
Maybe it is related to the references in your project.
Reference:
The type 'System.Windows.Input.ICommand' exists in both 'PresentationCore.dll' and 'System.dll'
Since it is not the VS General issue, I am moving your question to the moderator forum ("Where is the forum for..?").
The owner of the forum will direct you to a right forum. Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Maybe you are looking for
-
Data not matching in cube which gets from two DSOs
Hi All, I have a requirement. Cube gets from data from 2 DSOs. In 1 DSO - There are three fields which are mapped to one field in Cube 2 DSO--There are also similar type. Like 4 fields in dso2 mapping to 1 field in cube When the data is loaded into C
-
Itunes will not let my view any of the tabs like apps, music, tv shows, and it only allows me to view itunes u. i don't know why. i have been having this issue for a very long time now!
-
Dear friends, I got an issue like, my client need to put their HTML document into the portal, its around 300 files. So how to put htis html document into portal. Is it possible to put the html document or not, If not how to make appear HTML document
-
How to create placeholder garphics with unique filenames shown as text?
I need to create quite a few placeholder graphics, which are all the same size and background colour, and which show the filename of the graphic as text in the graphic. Later each will be replaced. I have the filename list but am not sure how I would
-
IPad 2 sound is not consistent
My ipad 2 sound goes is stages from sounding like crap to sounding normal and then no sound and back again. The whole process can take a couple of weeks to no sound for a week. Tried a power down and it brought the sound back but the sound is bad.