External dvd drive 600s

I have just bought the pavilian x2 and the 600s external drive. I can find the dvd drive in device manager but that is as far as I can get. I works on my daughters HP laptop but not mine. Where can I find the solution.

Hello Mikeaelgraham,
Did you mean to say "It works on my daughters HP laptop but not mine"?
If so, it shows up in the device manager but not as a drive in This PC (Computer) in Windows 8.1?
I would go back to the device manager and uninstall the drive there, restart the computer and let it reinstall again when you plug it back in.
See if in will play a disk with any dvd player like VLC Player, Cyberlink DVD or whatever you have installed.
If still no joy and considering its brand new, you can contact HP Support directly and get further support or a replacement.
Contact HP -USA Phone Assist | HP® Official Site
If you are not in the USA, click here for the appropriate link to your area for Phone support.
Hope it helps.

Similar Messages

All users GONE except for "Other"...and CANNOT boot from External DVD drive

I booted the iMac (Intel...the last one with the White Bezel) tonight, and all of my users were GONE except for "Other." The internal Superdrive has had a disc jammed in it for months, so instead I have an OWC external USB/FW400/FW800 DVD drive. Snow Leaopard.
I need to boot from the SL install disc, but that must go into the external drive...which, as it's been since I upgraded to SL, the Mac sometimes sees and sometimes doesn't. Right now it can't see it. Which leaves me a big pile of crap, doesn't it?
So, what to do? I can't boot the internal drive because it's jammed with a DVD (or I spend $300 to replace what should be a $20 optical drive in it), I can't boot the external DVD drive because the iMac w/Snow Lepeord can't see it, and, meanwhile, all of my photos, etc., are on my Time Machine backup drive...which, as long as I can't do any of the above, just sits there...useless.
Can you tell I'm a bit frustrated with this?
I've reset the PRAM. I've rebooted. I've held down all sorts of combinations of keys. I've tried every single interface type on the external drive and the same thing - the drive can't be seen by the computer.
Has the internal hard drive failed? Nope. I'm tying this using the Firefox browser that's running on my Windows XP installation via Boot Camp on the internal hard drive.

Thanks, but no luck so far.
I have an old iMac G3 downstairs, and I connected it to the machine via Firewire. I could see the disk on the 24" iMac, its folders, etc. I wanted to see if I could install OS X via Target Disk Mode from the old machine to the new one, but it's a PowerPC machine and you can't do that. Maybe you can't do that from ANY iMac...I'm not that experienced.
Now the iMac isn't booting at all to Windows via Boot Camp - it's been booting for 45 minutes now with the "WinXP" logo, but nothing. I'm about to throw it in the car and haul it over to my parents, who have both a Powerbook and a 27" iMac. Maybe it'll work there. Who knows.
Other ideas...replace the internal hard drive (cheap)...if that doesn't work, I'll just sell the thing. I'm not going to sink $300 into the thing when I can get a new machine for around $600-$700. I may go to a Windows7 machine on the desktop and a Powerbook...maybe even an iPad.
I really want to love this iMac. It's my first (well, I did have the G3, but that was just to play with) Mac. It's given me a ton of problems since I bought it new. It's always been a "stock" machine - nothing weird done to it. I was hit with an iMovie update once, and that broke iMovie. Even the new iLife 2009 didn't fix it. Then, the internal optical disk drive failed. I couldn't believe that Apple used a proprietary optical drive rather than a stock Pioneer model. Price for the drive alone? $200.
I installed Snow Leopard 2 months ago, and that completely broke my ability to use external optical drives. Sometimes they work...most times they don't. This is an ongoing problem that many people are having (check the forums)...but no fix. Where does that leave me? With a useless computer.
So, I've boiled it down to this: I love the Mac software. I hate the hardware. Sure, it's pretty, but if something goes wrong, get ready to pay. I hate that Apple knows about problems, yet does nothing to address them, like the problem with external optical drives and Snow Leopard.
I bought the Mac because I was sick of Microsoft not being able to simply produce an OS full of security holes. Often times I read people bashing supposed "driver ****" with Windows, but look at what users of Windows machine are demanding of Microsoft - "please make my software compatible with the trillions of combinations of hardware that can run the os...all the way back to stuff that was created in the mid 1990s." Meanwhile, from my experience, Apple can't get their software to work with their own proprietary, supposedly vertically-controlled hardware.
Windows7 is a not bad OS. It's got it's faults, of course. But, if my optical drive failed in a Windows box, I'd have it replaced in 10 minutes...with a bluray drive...that can write...for under $100.
I use my computer for pictures, etc. In fact, we were ready to send off to iPhoto for our yearly photo books. That's not going to happen, as the photos are forever trapped on my Time Machine backup drive (lesson learned: dump photos to a generic format...fat32 works...just in case you decide to switch from Mac to Win7). iLife is great. MS Office is great, too, on the Mac. I love the little things the Mac does right.
After years of screwing around with my Windows box, I wanted a computer that acted like a consumer electronic device. That's not what I've gotten.
Ugh, so now do I buy a Mac Mini for $700, a new iMac for $1,400, or a Macbook Pro and a mac mini?
...or...do I continue to work within this silly Ubuntu Linux world?
Whatever the answer, I wish I didn't have to ask the question now.

Boot Windows AND FreeBSD from my MacBook Pro 8,3 using an external DVD drive. I'm considering to remove my DVD-ROM and replace it with an SSD drive. That doesn't seem to work. Why not?

As the title says, I'm attempting to boot off my favorite operating systems, Mac OS X, Windows 7 and FreeBSD from an external DVD drive. However, for some odd reasons, booting the Windows DVD and FreeBSD 9.1 install DVD from the external drive does not seem to work. I was able to create a bootable USB with the Windows installer, but whenever I attempt to do the same with FreeBSD, I only get an error message that says "No bootable device -- press any key to restart." Is this a limitation that Apple deliborately created? If so, why won't Apple let its customers do whatever they please with their computers, considering that customers who want to change the hardware and/or operating systems knows what he is doing, without having to worry about some silly Apple limitations?
If I sound rude, I apologize for that, as no impoliteness is intended from my side.
In advance, thanks. Have a wonderful day, everyone.

That is only partially correct at best.
When you are booting off Windows or any other operating systems that usually don't support EFI (including Windows), your Mac uses something called CSM-BIOS. And as long as that CSM-BIOS implementation on EFI-based Mac do not support booting off from USB (note that Mac OS X Installer works fine when booting from USB), not even a USB Apple SuperDrive which once was an internal drive, there mot definately is something for Apple to fix.
When attempting to install Windows via BootCamp, a somewhat hybrid GTP/MBR table is created. When you boot off the installer disc of the OS you intend to install (i.e. Windows 7, FreeBSD, etc), your Mac might not support the EFI boot option (at least my 2011 17-inch MacBook Pro doesn't support that), so the only way of booting that second OS installer is via the regular BIOS, which Apple's EFI based systems implement as CSM-BIOS.

How do I install Tiger on a G3 iMAC from an external DVD drive?

I want to install Tiger on my PPC G3 iMAC. It is 500MHZ with 512 MB Ram, running 10.3.9. It has a CD drive, but CD version of Tiger is no longer available. I purchased a retail version of Tiger, and, on the advice of the Apple Store personnel, purchased an external DVD drive. It is a USB Lacie drive. My iMAC sees the DVD, but when I click the Install icon, it has a Restart button. Clicking the button restarts for 10.3.9. Same thing happens when I use the "C" key. When I try to assign the DVD drive as the startup drive, it says "ding" and won't assign it. What can I do next?

Take the DVD drive back and exchange it for a Firewire model. You cannot boot the iMac from a USB drive. This is basic information your Apple store personnel should know unless you failed to tell them what Mac model you have.

Can I use USB external DVD Drive to boot up my G4?

My G4 (PCI Graphics) internal drive DVD-ROM is not working, its dead. I want to replace it with an External USB or Firewire Lacie DVD Drive.
According to Apple document http://docs.info.apple.com/article.html?artnum=58606, my computer cant boot up from Firewire devices. I think that means, I wont be able reinstall my Mac OS or install future systems or start my DiskWarrior from the CD. Using a external Firewire DVD Drive. Let me know if I am wrong?
Can I use a USB external DVD Drive to boot up?
G4 (PCI Graphics) 400 mhz, 488Mb Memory, 50GB, 9.2.2 & 10.3.9. USB 1.0 & Firewire 400 Ports
G4 (PCI Graphics) Mac OS X (10.3.9)

Hi, Harold -
Bad news - your G4 (PCI) model can not boot to either a firewire drive nor to a USB drive.
Although the G4 (PCI) models do have native firewire, they (and their cousins the B&W G3) are specifically exempted from firewire booting; there is no workaround for this -
Article #58606 - FireWire Booting
Relatedly, a G4 (PCI) machine can be the Host machine in a Firewire Target Disk Mode setup, but can not be the Target machine.
Article #58583 - Firewire Target Disk Mode
USB booting was introduced first on the G4 (AGP) model, and is not available on earlier Mac models -
Article #58430 - USB Info and Benefits of Dual-Channel USB
The only external drive your G4 (PCI) can be booted to is a SCSI drive - but that requires that the machine have an appropriate SCSI PCI card installed.
Replacing the internal optical drive might be the best choice, particularly for ease of maintenance and OS installing in the future.

Using Recovery Media on External DVD Drive

Now that I know my internal dvd drive is fried, can I use my recovery media utilizing my external dvd drive?
I have a x205 9800 running Windows 7.
I put the recovery media in the external dvd drive and it still wants to run it from the internal.
I have disabled my internal "mat**bleep**a dvd ram uj-850s". No luck.
Any help would be deeply appreciated.
Thanks
Solved!
Go to Solution.

Hi Tamkhai,
The USB dvd drive is plugged into my laptop. I am able to get into the boot up area with F12, but it will only allow me to change the order. I put the USB to the top of the list. I restart the computer and it brings up the Toshiba Recovery window. I select OK. It says "Insert Disc 1." I insert disc 1 into the external and then it tries to utilize the internal dvd drive. Even if I disable it or uninstall the dvd drive it still wants to go directly to it.

Installing Windows XP on Lion using external DVD drive

Hi, this is my first time posting on a forum at all, so just keep that in mind when dealing with me.
I have recently attempted to install Windows XP by partitioning my drive using the disk utility (seeing as Bootcamp no longer supports Windows XP installations). The problems start when I boot from the installation disk; an error "no bootable device - insert boot disk and press any key" occurs. I am inclined to believe that this is due to me using an external DVD drive when doing all of this. I am using an external DVD drive because my internal DVD drive has been spoilt and is no longer useable.
Does anyone have a solution for me? It seems that it is not possible to install windows using an external DVD drive.

I am doing this after doing a full wipe of my hard drive and reinstalling lion.
Previously, I had lion, and made a partition using disk utility and booted from the disk (this time it was from my Mac's SuperDrive which was functioning perfectly at this point in time) and finished the installation completely fine. I then used the drivers that were in my Snow Leopard DVD (I have a Snow Leopard DVD from a previous Mac I purchased).
The only difference between then and now is that I am using an external DVD drive.

How do I run system recovery dvd from an external dvd drive?

I am having trouble trying to restore my DV 6000 (dv6915nr) from an external dvd drive. I am aware that this laptop has had several hardware issues, including the loss of use of the internal dvd drive and have tried all the fixes that I could find,including changing filter settings in the registry, changinging the boot order in the bios and even removing the intenal drive. Since none of these fixes worked, I removed the hard drive and installed window 7 Prodessional in a desktop computer. After reinstalling drive in laptop, I installed all the Vista drivers from HP. Computer works fine except for sound card and Nic that failed and have been replaced by USB devices. Simce I am not 100% sure the hardware failures are motherboard failures and not software, I would really like to run my System Restore DVDs that I purchased from HP. And that's where I need help.
I am A Plus and Network Plus certified, so I am pretty sure that I have tried all the obvious soutions. Evedrything turned on, checked the cables, accessed dvd in wimdows and even ran restore disk in a desktop machine to the point that it told me I was trying to restore the wong computer. I downloaded a program called Win To Flash that allows you to copy a setup disk to an external hard drive, but that didn't work. HP restore disk does not have Setup file on it, so it wouldn't copy to drive. Tried just copying the disk to external and that didn't work either. Also tried switching drive letters D and E without any success.
Bios choices are:
USb floppy
ATAPI cd/dvd rom drive
USB diskette on key
Notebook Hard drive
Network Adapter
Original restore partition is long gone.
I would rather restore it with an external Hard drive, not an USB memory stick. I think both would work the same. I do have an USB floppy drive, if there is some way of starting installation from floppies.
Like I said, I really like the computer, even with all its faults, but I would like to restore it to its original Operating System.

Some progress, I got it to try to boot from an external hard drive. Downloaded a program called WINToboot. tried to run it, got as far as formatting my hard drive and might have loaded some kind of boot program. Would not copy my restore disks because they did not have set up program. Copied both restore disks to hard drive and tried to boot laptop. F0 produced choose external hard drive choice. Got "no OS found" error. only choice ctl alt del. I think I am headed in right direction. Just need to know what to load on external hard drive.

How do I install an amazon external dvd drive to replace a broken internal one in my old macbook?

My old macbook has a broken optical drive inside it. The one that came with it has quit working and the genius at the genius bar said it needed to be replaced. The genius said to get an external one online so I bought the Amazon basics external dvd drive. I can't figure out how to install it and get it to work.

Nothing will show up on the desktop until you put a CD/DVD in it.
Plug it into the FireWire or USB port and turn it on. Put a CD/DVD in it and it should show up on the desktop.

Internal DVD drive is shot. Can I install SL from an external DVD drive?

Hi folks, a quick (well actually a few) questions.
I've had my imac since early '06. It's currently running Tiger, and I'd like to install Snow Leopard. The problem is that the internal DVD drive is shot. It's been occasionally refusing to accept DVDs for a while now, and now it has a DVD stuck in it (not mounted), which I can't get out via terminal, rebooting, or jiggling it (technical term I know).
Now, I'm going to assume that getting apple to replace the DVD drive will be more expensive than just grabbing an external drive, especially as I'll most probably only use it once. The question is, if I grab a cheap external DVD drive, will I be able to install Snow Leopard with it? Or will Tiger not recognise it as a boot drive?
Many thanks,
Chris
p.s. Also, I'm using a cheapo windows style keyboard (will be replacing asap), and I'm wondering if this is why I can't see bootable drives when holing option on startup?

Yes, you can install from an external drive, although I wouldn’t go for a cheap one. There are good, relatively inexpensive, drives out there. And you are going to need that option key to select the install disk as your startup. I believe there is a corresponding key on a PC keyboard, but I don’t know what it is (maybe Alt?). I’m sure someone can jump in here and tell us.

Apple dvd player / external dvd drive issue

i recently bought a LaCie d2 external dvd drive, since my desktop g4 only has an internal cdr drive. I am running osx 10.4.3, which i installed through this dvd drive. yet now, when i put a DVD movie into the drive and try to open Apple DVD Player, it says
"There was an initialization error. A valid DVD drive could not be found. [-70012]"
i know this is a third party drive, but can anyone help me out? pleeeease?

This is to be expected. DVD Player will only work
with an external DVD drive if the Mac has an internal
DVD drive.
However you may overcome this limitation using PlayerPatc
h.
I had the same problem as above (error code [-70012])... I downloaded this patch for my LG external DVD/RW Model GSA-2166D and it worked perfectly... can now play DVDs...
It's people like you who make being part of the mac community a joy!
Now I just need to find a patch to get the Light Scribe to work...
Thanks!
A1005 Mac OS X (10.3.9) M8758LL/A

I converted from a PC to a Mac Mini. I have my PC documents backed up on a DVD disk. I have an external DVD drive connected to the Mac Mini. I want to open them up and save them to the Mac, BUT....when I put the DVD disk in the Mac is NOT reading it!

I converted from a PC to a Mac Mini. I have my PC documents backed up on a DVD disk. I have an external DVD drive connected to the Mac Mini. I want to open these documents up from the DVD storage and save them to the Mac, BUT....when I put the DVD disk in the Mac is NOT reading it!

Hi Joe,
Thanks for your quick response. I should add....it worked before. When I previously inserted the two DVDs into this remote drive, and I went into finder, I could click on the "remote device" line and see all my saved documents (excel, word, etc) on the DVD and open them on the Mac. Now I cannot see them, when I try to open them on the Mac, nothing happens, nothing is displayed. I just re-tested the remote DVD drive with a CD and, no problem, it opened up the CD via iTunes and I cold play the CD. SO......I know the remote DVD drive (it's an LG by the way) is fine, it's something to do with some settings on my mini mac,especially where I could open it previously. I do not remember changing any settings since then.
When I go into system preferences and click on CD/DVD it gives me options of how to open up a music CD (default is iTunes), a DVD (default is iMovie), etc. The problem is my DVD is all miscellaneious files/documents. I just want to be able to see them in the finder. I also tried to open them via microsoft word, from the remote disk and again, it could not open the drive, even though some of the documents were microsoft word documents. Again, I was able to open them previously and the DVD is not corrupted in any way.
Any additional advice?
Thank you!

Need to install external dvd drive on mac book pro

My internal DVD drive has quit, so I purchased an apple external DVD drive. How do I get me mac book pro to recognize and install it?

Hi chrisweide,
Mac computers that shipped with a built-in SuperDrive may not be compatible with the external Apple SuperDrive:
Mac computers: Apple USB SuperDrive and MacBook Air SuperDrive compatibility
Regards,
- Brenden

External DVD drive in Mac Pro

I've installed an older external DVD drive, internal in my Mac Pro.
I see now that there is slight different in the design of the shuffel. Is it possible in any way to make my old drive, open the 'front door'?
Mac Pro Mac OS X (10.4.8)

Did you remove the front piece from the drive tray? It should unclip easily. Also, there are two different sets of mounting screws, depending on the brand of drive, to set the correct height, so the tray will open the case door. You may be able to adjust the tray height by loosening the front or rear screws.

IMac - external DVD drive crashes Aimersoft DVD Ripping program

I am using Aimersoft DVD ripping software (legal version) to make mp4 files out of DVDs. It works fine on the IMac internal DVD drive. But when I try and use an external DVD drive using FW800/400 conversion cable, Aimersoft program keeps crashing.
Any thoughts?

Peter,Welcome to Apple Discussions.
Here are some alternative choices for playing DVDs.
If the LaCie drive USB or FW?
Tiger is serious improvement over 10.1 (although you may need some more RAM) I'm not sure whether it will cure the DVD player issue? If you still have space (9Gb) on your 40Gb drive you could use Mac the Ripper, and then open the VIDEO_TS file in DVD Player.
mrtotes

External dvd drive 600s

Similar Messages

Maybe you are looking for