External Dvd problem

Hello: I usually output my dvd to the built-in dvd burner in my iMac. It seems I'm having an issue with certain brands of disk, so I tried hooking up an external dvd burner, but I cannot figure out how to get dvd studio pro to recognize the drive. I hit "burn" and put the disk in the external drive as I am told to do, and nothing happens, except the mac asks me what application I want to try to "open" the dvd with.
Any suggestions would be appreciated.
Mark

Using the "Burn" button does not let you choose the burner.
Use "Build and Format" instead, which gives you a lot more control:
and then choose the burner:
For more info here.
MtD
Message was edited by: Meg The Dog to fix typo

Similar Messages

External dvd problems

I have a ibook G4 and just purchased a external dvd burner and player. It works fine for dvd programs. I also up upgraded to tiger from a dvd with no problems.When i try to play a dvd video the the dvd player program will not open The message comes up -There was a initialization error. a valid dvd drive could not be found (70012). I tried the sane new dvd external burner in my I Mac G5 and it worked fine. The dvd player started up and a video played. Please some one advise.
Mac OS X (10.4)

Hi Owlv,
Welcome to Apple Discussions
You may want to look at Knowledge Base Document #42727 on Apple DVD Player requires an internal DVD drive. Are you using DVD Player 4.6 or 4.6.1 or higher? You can find out by going opening DVD Player > About DVD Player.
Jon
Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more... Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..

Problems ripping with an external DVD Burner

Hello Everyone,
Recently I purchased a Liteon External DVD Burner off of newegg (http://www.newegg.com/Product/Product.asp?Item=N82E16827106011) -- It's a Liteon SHW-1635SX -- I bought this because the DVD-ROM drive thats in my tower natively is REALLY slow and I wanted to get a new one that I could use with a laptop that I`m going to purchase in the future. Whenever I try to rip a CD into iTunes using the burner, It says that it's ripping the disk, however it doesn't spin up the cd and it takes about 2 seconds to "rip" all the songs. I know this drive is soposed to be faster than my old one, But two seconds is a little TOO fast. Plus, I know that it's not copying the songs because when I try to listen to them in my library, the song won't play. (Under time it says "789:54..." for all the songs on the cd, in my library) However, the burner rips perfectly in Windows Media Player... Is this perhaps some kind of glitch with iTunes??? Basicly, the only way I can rip a CD into iTunes is to use my old DVDROM drive, but that defeats the purpose... below is the CD Diagnostic log that I got from iTunes::::::::
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
HP Pavilion 05 P9859A-ABA 533w
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: PxHelp20 (2.0.0.0), AFS2K (3.1.21.0), DRVMCDB (1.0.0.1), SSCDBHK5 (1.0.0.1), PFC (2.5.0.196),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: Intel(R) 82845G/GL Graphics Controller\Intel(R) 82845G/GL Graphics Controller
IDE\DiskMaxtor4R060J0_________________________RAMB1TU0, Bus Type ATA, Bus Address [0,0]
IDE\DiskST34323A_______________________________3.02___, Bus Type ATA, Bus Address [1,0]
IDE\CdRomCOMBIRW16x10/DVD_______________________H1.0___, Bus Type ATA, Bus Address [0,0]
USBSTOR\CdRomLITE-ONDVDRW_SHW-1635SYS0Y, Bus Type USB
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Check the Windows Update website to verify that you have the latest service packs and patches for your OS. Service packs affect the performance of USB and firewire CD / DVD drives.
Current user is administrator.
E: COMBI RW16x10/DVD, Rev H1.0
Drive is empty.
F: LITE-ON DVDRW SHW-1635S, Rev YS0Y
Audio CD in drive.
Found 9 songs on CD, playing time 42:13 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:30:07
Track 3, start time 08:44:33
Track 4, start time 12:03:74
Track 5, start time 17:55:53
Track 6, start time 22:14:31
Track 7, start time 25:32:60
Track 8, start time 30:13:01
Track 9, start time 35:59:06
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 8 16 24 32 40 48.
The drive CDRW speeds are: 8.
The drive DVDR speeds are: 8.
The drive DVDRW speeds are: 8.
The last failed audio CD burn had error code -128(0xffffff80). It happened on drive E: COMBI RW16x10/DVD on -128(0xffffff80) media at speed 0X.
Your replies are greatly appretiated!
--Aric--

hi Aric!
hmmm. we'd better check on the usual suspects with that. (the incredibly long song times can also be associated with these sorts of causes.)
You can't import or play music from an audio CD in iTunes for Windows
... and the following resources might be helpful with that. (check on firmware and drivers even though it's a brand new unit.)
Using CD Diagnostics in iTunes for Windows to troubleshoot CD/DVD drive issues
iTunes for Windows: Updating the firmware on your CD or DVD drive
Updating the drivers on your Windows PC
Where to find firmware for your CD/DVD drive
love, b

Problem booting from external DVD drive on Lenovo S10e

Hi,
I recently purchased a new Lenovo S10e ideapad, a few weeks prior to that I purchased an external DVD rewriter drive manufactured by LG, the drive works perfectly on every computer I try with the exception of the Lenovo ideapad S10e.
The thing is that the drive is being recognized and installed by the Windows XP Home Edition the S10e came with but when I try to boot a bootable CD using then drive on the S10e ideapad I almost alwasy fail to do so.
I set the S10e BIOS to have the USB CDROM as first boot device, in addition I used the F12 key to use the boot menu to choose the boot device, in 9 out 0f 10 atempts my external drive will not show in the boot menu and when choosing the enter setup option I see that the BIOS do not list it as the USB CDROM, instead it says "USB CDROM:" rather than have the drive name after it.
In the 1 time out of 10 it does work the BIOS seem to be identifying the drive and it shows in the boot menu, however I cannot work with it for a more than 1 minute without it stopped being recognized again.
The problem seems very strange to me as the drive works under the windows operating system and do not have any problem whatsoever on other computers, I have tested the external drive on my PC, another Mini Laptop from LG and a GIGABYTE Laptop (Normal one), all of which had no problems recognizing the external drive and booting from it.
I will really appreciate if I can get some help with the problem.
Thanks.

I've had a similar issue with X61 and the external DVD drive from Lenovo.
In my case, it was the power issue. On the back of the drive, there is a small table says that the drive needs a 3.0A 5V power input. One USB 2.0 port can only provide 0.5A. I don't know if the drive has any special, low power mode, but I suspect that even if it has, 0.5A is still not enough to fully power it. I've checked the current with the multimeter, and at peak times, the drive draws 550mA. Even then, it makes a stuttering sound for a few seconds, before finally spinning the DVD disk. I've also noticed that the DVD works most of the times when it's connected to the left USB port. That may be because of how the laptop's internal power circuicity is laid out (+separate USB host controller for each 'side' of the laptop). Another thing that seems to help is to disable all 5V driven devices that the laptop uses: the wifi card, bluetooth, any additional devices connected to the USB bus / to the ethernet port / SD card port (I'm not actually sure which of the devices are 5V and which are 3.3V, but the best option is to disable all of them), maybe even remove the battery (if it's charging). Finally, the DVD drive works better if the laptop was turned on and runnig for some time, rather than it being turned on "a minute before". Also, in the BIOS, there is a setting that changes the speed of the DVD drive, but switching it to "low" didn't seem to affect the external drive (at least not before Windows boots up).

External DVD Drive Problems - Mountain Lion

hello,
I am having problems using external DVD Drives on my 2012 Mac Mini.
I have tried using 2 plug and play devices that are stared to work with Macs.
The drive powers up but it does not appear anywhere on the mac. essentially it wont mount.
the lasest drive I have tried is the Samsung SE - 208
Please Help!!!

Connect the drives, launch Disk Utility, and see if they show up. If so, pop in a disc and see if that solves your issue. AFAIK, they won't mount unless there/s a disc inside. If still no go,Zap the PRAM and Reset the SMC, then try again.

Problem burning to external DVD

I'm trying to burn my iDVD project to an external DVD burner (brand-new Philips model that's supposed to have all the bells and whistles). I went with an external burner since the Pioneer drive that came with my eMac croaked and I couldn't find a good replacement. I was able to burn a disk yesterday with no problem, but today, after I made some changes to my movie project and wanted to burn a new disk, it keeps trying to talk to the (broken) internal drive instead of the external one. I know the computer recognizes the external drive because it asks me what I want to do when I insert a disk or when I unplug and plug the USB cable back in. Is there some way to disable the internal disk drive so iDVD won't keep defaulting to it? This is driving me crazy because it worked perfectly yesterday, and I didn't do anything different this time around.
Any suggestions gratefully accepted, because right now I want to throw the whole system out the window.

Hi
USB Cable ? Does this works ? Previously ?
Not knowing the origin to Your problem - General approach when in trouble is as follows:
Many possible origins. Most common:
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Hard disk is untidy: Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Delete iDVD pref file - *or rather start a new user/acount* - log into this and re-try
• Program miss-match: eg iDVD 5.0.2?, Mac OS X.4.11 AND QuickTime 7.4 - is OK
Yours Bengt W

Problem upgrading to 10.4 from 10.3.9 and a external DVD?

Hello,
To use my new ipod touch i have to intall Os 10.4 on my emac.
I have purchace the Tiger V10.4 DVD for the emac.
When i tried to install it the first time i found out my DVD reader/burner is broken ?.... ok no problem...i when out and spent 60$ to buy a external DVD player/burner.
But now... It wont install ?
I have tried to install it from the DVD using the C key on restard, switching startup disk in the preference systeme...and it just wont do it ?
I can install all the otter sofware included in the DVD's...but not OS X 10.4 ??
I have read somewere that its possible a installation wont work if we are not using a hardware made by Mac ? but i was not able to find a solution to this ?
I have tried to copy the disk on my computor HD and start it from there, but no success ? maybe im not doing it the rigth way ? i migth be forgetting someting ?
Any suggestions ?
Any idea on what could cause this problem ? (beside buying a PC of a new Mac)
Cheers!
Message was edited by: dobmaster

dobmaster:
yes... its a USB : /
You cannot boot a PowerPC Mac from a USB device. You need an external Firewire DVD drive.
If you have a another Mac that supports firewire available you can install using Firewire Target Disk Mode. Here's how:
• Boot the Mac with working optical drive in Firewire Target Disk Mode.
• Insert install disk into Target Computer's optical drive.
• Connect computers via firewire cable
• Option Boot computer to which you want to install.
• Select Install Disk for startup and click on the straight arrow.
• Proceed with Installation
Please post back with further questions or comments.
HAPPY HOLIDAYS!
cornelius

External cd/dvd problem

Hi all
I've just purchased a hp 8x external slim multiformat dvd/cd writer for use with my new Lenovo yoga. The driver successfully installed once the dvd/cd writer was plugged into the usb port however when I've tried to run a cd such as the media suite software which came with the writer or my software for Microsoft office I get the message "this app won't run on this pc" - do I need to download an app from the windows store, if so which one?
Please bear in mind I'm very new to windows RT and don't know a lot of technical stuff to do with computers.
Thanks

Actually I have the same question. I’m looking for a good external DVD player that users KNOW works will with the IdeaTab Lynx K3011W (running 32-bit Windows 8).
I've had some trouble with the LG Slim Portable Blu-Ray Multi Drive (CP40NG10) working with my Lenovo IdeaTab Lynx K3011W. It's very intermittent (USUALLY works but not always) and I could not get the bundled Cyberlink software (thus free) to install. Some elements of the suite install but crucial items (like the DVD player) just "hang". I’m still hunting for a good DVD app and using trial versions to find one. I've updated drivers and firmware so that isn't the problem.
If I could find a more reliable DVD player I’d get it. I’d probably KEEP my current one (and use it on some other machine).

Problems booti and install Tiger on a G4 running 9.2.2 from an external DVD

G4 PCI powermac, just a cd drive built in, running 9.2, sees external iomega dvd drive, reads dvds, cds, but when I try loading tiger from a dvd there are problems.
I puu the tiger disc in, click on install, then get a message that startup disc cannot set this drive as the startup disc (or similar). Restarting and holding the c key doesn't work- I get blinking question mark and have to disconnect the iomega drive, put the 9.2 cd in the internal drive and restart again holding down c key to get anything. Then, running from the cd I can reset the startup disc to the hard drive. Neither can I install tiger running 9.2 from the internal cd, with the tiger DVD in the Iomega drive- it sees it, but requires that the tiger install disc be the startup drive, and we go around again if I try that.
Q- is this possible, ie to load tiger on a PCI 400mhz powermac from an external DVD drive? has anyone done it? how?
Thank you.
by the way, PCI 400mhz powermac- doesn't need firmware updating, can't be put into target mode, can't boot from a firewire device (and I have tried, just in case)

Joe, thank you very much for your post. The PCI G4 won't boot from an external USB dvd drive. Part of the apple support site says it will, another part says it won't. It won't. And it's well documented that the PCI G4 won't boot from a firewire device, neither can one put it into target mode.
The method Joe suggests does work. I arrived at it independantly, with this method- I ran 9.2 from a CD and partitioned the internal hard drive 10GB dive, ended up with two 5GB partitions. then installed 9.2 on one partition.
Restarted and I'm running 9.2.
Then copied the Tiger install dvd from an external dvd rom, just a normal drag n drop copy, while running 9.2 (you can't do this under OS X) Then set the startup disc as the partition with the OS X install files on it.
(I copied the Tiger files ontot he partition that wasn't running 9.2)
Pressed restart, a long wait and then it sprang into life and installed OSX on the other partition, but without asking if I wanted a clean install- it just installed it alongside the 9.2 system folder.
I had to specify no extras, it prompted for that, via a message that said free space was tight.
All went well and it's running 10.4.4
Problems that have arisen- 1. won't update the system. Downloads the files via software update, then says it can't use them. The update dmg files from the apple site won't work either.
2. won't shut down properly- goes to a blue screen, then stays there- I have to unplug it every time.
Otherwise ok.
prior to working this out out, I visited the local apple store- no cd copies of tiger, exchange program withdrawn. Suggested I call apple. Did so, was directed to technical support. Technical support, very nice guy but knew zero about this.
this is really a bit of fun for me, I have other macs, so no worries, but if anyone has a copy of Tiger on CD, I'd really like to borrow it.
Thanks everyone
Mike

Problems with external dvd/cd drive

I have recently purchased an external dvd/cd burner to use with my G3 iMac and I cannot get it to work. Please can you let me know where I can download some software so that it works? Or shall I return it to the company and ask for my money back?
Thanks for your time.
Regards
Mary Ann

Your iMac has two FireWire ports--they are the ones on the right side "port panel" marked with this symbol:
!http://www.build-your-own-cheap-computer.com/images/firewire.jpg!
Your DVD drive, if FireWire equipped, should have a similar symbol. There are two kinds of FireWire connectors, 6- and 4-pin, that are illustrated in this Wikipedia article:
http://en.wikipedia.org/wiki/IEEE1394interface
If the drive really has FireWire, all you need is a cable. There are 6-to-6 pin and 6-to-4 pin cables. Your iMac needs the 6-pin connector. What cable you get depends on the DVD drive, so you might take it with you to make sure you get the right cable.
If it turns out the drive des not have FireWire, then consider returning it for one that does, or one that works with USB 1.1,

Why would the Firewire Port and/or External DVD-RW suddenly not work?

Hi, it's me again. I swear, I must be destined to just use Windows machines...
Anyways, I have a used/refurbished iBook G3 500MHz 320MB RAM Dual USB (1 Firewire)laptop running OS 10.2.8 that I bought a few months ago. I went and purchased an external Firewire/USB 2.0 DVD-RW drive as I only had a CD-ROM drive on my machine and I wanted the option to burn CD's or watch/read data from DVD's (I know that with my slow processor writing DVD's -other than data- would be a stretch and have other machines to do that with anyways so it wasn't a concern really). I received it and installed it, also installed the free version of Toast that came with it, and the drive worked fine. I have not needed to use the drive since then and have not used the laptop much at all since then really, but I do need to say that I did end up adding a new user account, though I can't remember if I changed the original Admin account and then still have the one I created myself when I first started the laptop after I bought it (had a fresh install of Jaguar on it, but I have no disk to re-install with if needed) or if I created a separate (new) account and ended up deleting the Original Admin accout (I know in Windows, you cannot delete the original Admin account but I do not know if that is the same for OSX or not). I did this as I wanted a master Admin account that I just wouldn't really use and then wanted the other as my main account (and use it to connect to my home windows network) and for some reason it would not let me put a check in the box to allow that account to do so (from either Apple or my user accounts) and so I know that my main user account now is set up to allow it (was it the old Apple user account or a new one, I can't remember- sorry).
Ok, so that is the back story to my problem, which happens to be this:
I just bought a new chip of RAM (512MB to make it a machine with 576MB RAM total) and as I had been looking at getting OSX Tiger (but didn't want to do it without the extra ram and had been considering Panther instead as well), I thought it was necessary if I wanted to not bog down my machine. I bought the Install Disks on DVD for Panther, as well as an upgrade disk (DVD again) for Tiger, therefore letting me use the External Firewire DVD-RW to install Panther, and if I liked I could go ahead and upgrade to Tiger (and if I didn't like it too much, or it slowed things down too much etc, then I could always go back to panther and have both available for future options). The extra RAM coming in handy here definitely.
So I was going to install the RAM today, and decided to go ahead and test out the External DVD to make sure it could boot from it (before making any changes to my system) and then go and install the RAM, and after that, install Panther to start... But I plugged all the cords and cables in, used my laptop with AC power even, and I could not get the External to show up at all... (kinda like the very current post right below mine but for the G4- it worked before, but now the firewire External just does not show up).
I only have USB 1.1 on this laptop obviously, and I don't even know if you could do a boot from an external with USB 2.0 if my laptop had it (the DVD player does). I was recommended to boot with an external firewire DVD or firewire to another machine with DVD capabilities to do the install. So my problem right now is getting slightly bigger, as of course, I can't seem to momentarily find the stuff that came with the External (spare USB cable to check and see if the laptop will recognize it at least with that and to show it is the firewire that is not working properly, or the disk that I used to install it -might have been only used to install Toast free version if it didn't need any drivers, but I don't know where that or the instructions for installation sheet currently is -- I am looking for it, but I have switched bedrooms just last week and I also seem to be missing a few other Windows laptop disks as well so there is a good chance that they are all together, I just need to figure out where, heh.)
I am waiting currently before installing the memory, though if I don't get the External working tonight, I may go ahead and do it first as at least I will have more memory on my laptop then, until I can get other stuff functioning and be able to do the Panther install.
But my main question is, is there something that would cause an installed external to suddenly not show up in OSX? Since I hadn't used it since that one day, and it was unplugged from the laptop itself, would that end up doing it, or more likely, the changing of the user accounts (though I have been trying to test it with different types of media and through both of my user account (which are both "admin" ones), though I do still have one of those being an account that was on there when the External DVD was first installed, so it really shouldn't have done this at all (one would think). So how big of a chance is it that the firewire has somehow gone dead and this is the main culprit to my wasting the past 4 hours on this???
I am currently scavenging around for an extra USB cable to try and test the External that way and will post the results when I can... I love the look and idea of macs, now I have a mac and want to upgrade it even, but why is it that whenever I attempt to use it after having not used it for a bit (and try to make the iBook feel better by using it more as I am sure it feels sad and alone sitting on the shelf while my Windows Laptop gets more attention), or try to fix it when it can be made better (and therefore used more often), the mac (all macs really), just seem to get all pissy and cause problems and make me spend hours upon hours trying to get things to work again??? You have to admit it, I am "mac cursed"... sigh I can program in 4 or 5 computer languages and am very advanced at many tech things (the ones I am not as good at I am still usually Average or Medium skilled) so it makes me wonder why I have so many tech problems with Macs when they are supposed to be the "easy" OS to use...

Actually, I think I have it all working now. After going back to the Plextor Website, I found out that the switch between the USB and 1394 ports only gets activated (switched over to the other) with you turn the device off first, move the switch and then turn it back on. I was sure that I had done this with the ibook, but maybe not as when I went back and did it with first the USB and then the Firewire cables, it did work. I definitely knew that I had not done this with the Windows laptop, the reason it would not have the USB work for me on it.
but back to the iBook, I was confused as it was only showing up as a DVD-ROM (which I guess is what they do until you actually open up the burning software to then be able to burn to it), and it also had the wrong Model #, which after more research, showed that it was the Internal DVD drive model version (PX-708A) compared to the actual model version (PX-708UF) which is the USB/Firewire (External) model. The firmware was really out of date as well (from June 2004 I think, v1.06) and they had v1.12 from Spet/Oct 2006 available so I went to get that (which was a hassle). They had nice easy Windows self extractor/installer packs, and then the BIN files for use for all systems (Sun OS/ Mac OSX/ Mac OS/ Linux etc as well as usable for Windows), and those needed a special Firmware Updater Application which was OS specific. Only I had the hardest time trying to get the OSX one as it would send me to a FTP site and not give me any clues as to which file(s) I needed to get and the Mac OS version was just for older 9.2 or below versions and didn't want to install under the OS Classic mode.
I ended up using my windows computer which made it easier to view with the FTP stuff as I have FireFTP in Firefox, and downloaded the files I thought I needed (to test out), and then realized my silliness, and just downloaded (as well) the Windows Auto Extractor/Installer as the Firmware is the same for all OS's, just the way to install/update it was different... So I hooked the DVD drive to my PC and updated the firmware, checked it out on here before moving it back to the ibook, where I checked that it still worked and had the new update version showing, which it did, and now I have my fully working and newly updated drive ready for the OSX installations... I had attempted to update my Jaguar system as well while online, but it had no new updates available (I guess those were all mostly Tiger updates that were just recently released).
I am now off to install my additional RAM, and after checking that it all shows up correctly, I will go ahead and do the Panther Install (and test it out and see if I like it or not).
For anyone that currently uses Panther on any mac, are there still any major problems I should know about before hand, or know about things that they have mostly fixed (like the issues with Firewire ports and External Drives that they had around the time Panther was first released for example)???
Thanks to all that helped... I now know to attempt an "eject" of any external HD (which I do have one that I will setup to use after I get Panther on the ibook) or CD/DVD drive instead of just unplugging the USB/Firewire cable.

How do I use iMac as monitor for external DVD player (HDMI to Mini DisplayPort)

iMac 27" (late 2009). Internal DVD is region locked. I would like to use an external DVD player to watch DVD's from other regions.
I can't use the new Apple SuperDrive because they say it's not compatible with iMac's before 2012. (Is it??)
My iMac doesn't have Thunderbolt. It has mini displayport.
I have resigned to getting a generic DVD player and plugging it into the screen.
I have found this in Apple support pages...
Can I use the iMac in TDM as a display for my gaming console, DVD player, or other device?
The Mini DisplayPort port on a supported iMac can receive DisplayPort compliant video and audio signals. Converters not made by Apple may provide options to convert other electrical, video, and audio protocols to Mini DisplayPort or Thunderbolt compliant signals.
( http://support.apple.com/kb/HT3924 )
What is DisplayPort compliant video and audio signals? Does HDMI fit into that signal type?
Is it possible to get an HDMI to Mini DisplayPort converter?
Will it work if I get a generic DVD player with HDMI output? (and connect it to the iMac through MiniDisplayPort)

First try VLC.
<http://www.videolan.org>
On many Macs, it will play DVDs even if the region codes don't match.
The Apple SuperDrive should work if you use the terminal (Utilities foldsr) command:
sudo nvram boot-args="mbasd=1"
There are also non-Apple USB or FireWire external DVD (and Blu-ray) drives, such as:
<http://eshop.macsales.com/shop/optical-drives/superdrives/>
Apple's DVD player may not work with external drives, but you can use VLC or Blu-ray™ Player
<http://www.macblurayplayer.com>
There is a converter to connect HDMI to the iMac via TDM
<http://www.kanexlive.com/xd>
but it will run at 720p (1280 x 720) and may have problems with HDCP (High-bandwidth Digital Content Protection) on HDMI from Blu-ray or DVD players.

HP Pavilion HDX9000 Connect to External DVD Player

Our older HP Pavilion HDX9000 DVD died and we wanted to use an external DVD player to drive the monitor on the HDX9000. It does not seem possible to do this despite the HDMI and many other ports. The PC is running Vista. Any suggestions?

Hi,
What is your external DVD player ? There are many USB DVD players for under $50 and you can use it as internal DVD player. You can't use DVD player from your home Hi Fi system because no available port on your computer to plug it in.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

External DVD Drive Not Recognized

Just got a Toshiba portable supermulti DVD/CD drive. My internal drive is fried and figured it would be cheaper to get an external until I can get a new computer. Except, when I plug it into either of my USB ports, the drive lights up and makes noise for about 10 secs, then stops and it does not register on my computer. The drive shows up on the System Profiler, but nowhere else is it recognized. When I try to open Disk Utility, it just says 'Gathering Disk Info' and just pinwheels and is Not Responding until I Force Quit. Any thoughts as to what the issue is? My computer recognizes my external hard drive, iPod and anything else I plug into it and the DVD drive was recognized no-problem by my Dad's new Macook Pro and by my brother's PC. I should say I have the 2007 model Pro. Thanks!

Is the DVD drive externally powered? I.e. does it have a power supply?
For exmple my LG external DVD won't work with a single USB on my Macbook Pro - it requires another usb cable that has a power plug on the end. So both USB ports are used.
It kinda works without power, but it's unreliable, it could be you're having a similar issue?

Recommendations, please, for external DVD writer for my 2006 iMac. (Internal drive unable to write coherently.)

Recommendations, please, for an external DVD writer for my 2006 iMac whose internal drive is writing unreadable discs.
Model Name:          iMac
Model Identifier:          iMac5,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.16 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          4 MB
Memory:          4 GB
Bus Speed:          667 MHz

Thanks, A Brody. Don't know what the PRAM battery is. Here are more details of the fault ... Although I've had the iMac for 5 years this may be the first time I've tried copying a video recording onto the DVD drive (I've made lots of CD copies without a problem). The folder and files all seem to be reproduced in identical order on the disc but my domestic DVD player cannot make sense of the recording, unlike the original source DVD from which the files originated. The drive has always been noisy but I've never assumed it shouldn't be! Does this fit your PRAM battery theory? If so, please explain more. Thanks.

External Dvd problem

Similar Messages

Maybe you are looking for