External DVD to Inspire 6700

Hi!
I'm just wondering if there is a way to connect the 5.1 outputs on my DVD player to my Inspire 6700 speakers? The rear centre wouldn't be used, I know, but is it possible to connect the rest?
Also, am I right in thinking, having read threads until my head has started spinning, that by connecting the optical out on my DVD player to optical in on my Audidy 2 Platinum will only result in left and right audio?
Thank you for any help. I'm off to stop my head spinning now!
Paul

Thank you for the reply but to be honest, I'm not sure if what you're saying is correct. My DVD player does indeed have six speaker output sockets but don't forget that the Inspire 6700 speaker only have three inputs which are front (l/r), rear (l/r) and centre (c/rc/sub). My DVD player has built-in decoders.
As for the optical part of the question, I'm pretty sure you only get left and right audio. Can anyone corroborate this?

Similar Messages

Inspire 6700 DVD connection

I have a set of Inspire 6700 speakers connected to my present DVD player. The DVD player has six phono outputs: L, R, RL, RR, Ctr, Sub. I've used phono to 3.5mm converters to connect these into the three input sockets on the 6700 system. I am now looking at getting a DVD recorder, but this doesn't have six phono outputs: it has only 2 for L&R. It does, though, have an optical output. Is there a way to convert this output into the required three 3.5mm connectors required for input to the 6700?Gary

Jason, Thanks for this - it looks like it would do exactly what I want. However, I'm in the UK and all the stores I've tried list it as discontinued. I've tried searching with Google and even looking on eBay, but can't find one anywhere. Do you know if there is a replacement model available?Cheers, Gary

Inspire 6700 Whooshing/Popping/Distorted Sound..

Just bought some Inspire 6700 speakers via eBay..... Also an Audigy Platinum EX card.. Anyways... The sound is awful, constant popping sound even when there is nothing being played (CD/DVD/etc..) When I am trying to play something, the sound is very low, distorted, the popping gets worse and just occassionaly will BURST into life momentarilly.. before going back to it's previous dire performance. Can't be certain, but I think the volume control is broken? Only seems to produce any acceptable sound at about level 4, but even that is marginal/breaks up. Either side of 4 you get almost nothing. The LED on the volume control flickers on and off constantly. I've hooked up my original stereo speakers and they are fine.. no distortion etc. Clues please?
Edit - Disconnected the 6700 from the Audigy sound card and I STILL get the popping and whooshing sounds....Peter
Message Edited by jpo on 02-20-2005 08:51 PM

Hi Cat
Happy to contact support, but given these are refurb speakers purchased via eBay, are support likely to be that interested? Great if they are.... What's best contact method if you think they may be able to help me? (E-mail/phone)
Regards
Peter

Creative inspire 6700 with DDTS-100 ??

Hi there,?I have the creative inspire 6700 speaker system connected to my PC (audigy2 audiocard) andit works fine. Then i saw the DDTS-100 decoder on the website and it looks like the thing i need.So, it's possible to connect my 6700 system to the DDTS 100 ?and then i can use a digital in/out to the DDTS system and then it will work ?(i have a dvd player that i want to connect)?Greetz,...

I am sorry but i am new to these forums and i am actually looking for help myself. I have the creative 6. 6700 speaker system and just today dropped and damaged the casing to one of the sattelite speakers. I have searched the internet to see if i can get another speaker or another set. Can you help me. Im in Scotland in the uk but if there is a place i could contact to buy from that you know i would appreciate it. i will see if i can help you soon.
Thanks.
mark.

Boot Windows AND FreeBSD from my MacBook Pro 8,3 using an external DVD drive. I'm considering to remove my DVD-ROM and replace it with an SSD drive. That doesn't seem to work. Why not?

As the title says, I'm attempting to boot off my favorite operating systems, Mac OS X, Windows 7 and FreeBSD from an external DVD drive. However, for some odd reasons, booting the Windows DVD and FreeBSD 9.1 install DVD from the external drive does not seem to work. I was able to create a bootable USB with the Windows installer, but whenever I attempt to do the same with FreeBSD, I only get an error message that says "No bootable device -- press any key to restart." Is this a limitation that Apple deliborately created? If so, why won't Apple let its customers do whatever they please with their computers, considering that customers who want to change the hardware and/or operating systems knows what he is doing, without having to worry about some silly Apple limitations?
If I sound rude, I apologize for that, as no impoliteness is intended from my side.
In advance, thanks. Have a wonderful day, everyone.

That is only partially correct at best.
When you are booting off Windows or any other operating systems that usually don't support EFI (including Windows), your Mac uses something called CSM-BIOS. And as long as that CSM-BIOS implementation on EFI-based Mac do not support booting off from USB (note that Mac OS X Installer works fine when booting from USB), not even a USB Apple SuperDrive which once was an internal drive, there mot definately is something for Apple to fix.
When attempting to install Windows via BootCamp, a somewhat hybrid GTP/MBR table is created. When you boot off the installer disc of the OS you intend to install (i.e. Windows 7, FreeBSD, etc), your Mac might not support the EFI boot option (at least my 2011 17-inch MacBook Pro doesn't support that), so the only way of booting that second OS installer is via the regular BIOS, which Apple's EFI based systems implement as CSM-BIOS.

How do I install Tiger on a G3 iMAC from an external DVD drive?

I want to install Tiger on my PPC G3 iMAC. It is 500MHZ with 512 MB Ram, running 10.3.9. It has a CD drive, but CD version of Tiger is no longer available. I purchased a retail version of Tiger, and, on the advice of the Apple Store personnel, purchased an external DVD drive. It is a USB Lacie drive. My iMAC sees the DVD, but when I click the Install icon, it has a Restart button. Clicking the button restarts for 10.3.9. Same thing happens when I use the "C" key. When I try to assign the DVD drive as the startup drive, it says "ding" and won't assign it. What can I do next?

Take the DVD drive back and exchange it for a Firewire model. You cannot boot the iMac from a USB drive. This is basic information your Apple store personnel should know unless you failed to tell them what Mac model you have.

How Do I Use my MacBook Pro to Watch a DVD From External DVD Player

Hello Everyone!
While waiting for Apple TV to become available in my place of work, I want to use my MacBook Pro monitor for watching a DVD movie played on an external DVD player. The DVD player I have is an LPC-D1000, which is a new model. While Mac has its own DVD player, I'm trying to make use of my LG DVD player. If that's possible, please guide me on how to do it.
Thank you.

You could use Elgato Systems' EyeTV product to view external video sources on your MBP.
There is additional cost involved, but it would achive what you want. You can buy the Hybrid product, and connect your external DVD player via Composite (red, white and yellow connectors) to your MBP via the EyeTV.
http://www.elgato.com/index.php?file=products_eyetvhybridna&PHPSESSID=3c4e16afe5 0303162b285a6f70791f86

Why would the Firewire Port and/or External DVD-RW suddenly not work?

Hi, it's me again. I swear, I must be destined to just use Windows machines...
Anyways, I have a used/refurbished iBook G3 500MHz 320MB RAM Dual USB (1 Firewire)laptop running OS 10.2.8 that I bought a few months ago. I went and purchased an external Firewire/USB 2.0 DVD-RW drive as I only had a CD-ROM drive on my machine and I wanted the option to burn CD's or watch/read data from DVD's (I know that with my slow processor writing DVD's -other than data- would be a stretch and have other machines to do that with anyways so it wasn't a concern really). I received it and installed it, also installed the free version of Toast that came with it, and the drive worked fine. I have not needed to use the drive since then and have not used the laptop much at all since then really, but I do need to say that I did end up adding a new user account, though I can't remember if I changed the original Admin account and then still have the one I created myself when I first started the laptop after I bought it (had a fresh install of Jaguar on it, but I have no disk to re-install with if needed) or if I created a separate (new) account and ended up deleting the Original Admin accout (I know in Windows, you cannot delete the original Admin account but I do not know if that is the same for OSX or not). I did this as I wanted a master Admin account that I just wouldn't really use and then wanted the other as my main account (and use it to connect to my home windows network) and for some reason it would not let me put a check in the box to allow that account to do so (from either Apple or my user accounts) and so I know that my main user account now is set up to allow it (was it the old Apple user account or a new one, I can't remember- sorry).
Ok, so that is the back story to my problem, which happens to be this:
I just bought a new chip of RAM (512MB to make it a machine with 576MB RAM total) and as I had been looking at getting OSX Tiger (but didn't want to do it without the extra ram and had been considering Panther instead as well), I thought it was necessary if I wanted to not bog down my machine. I bought the Install Disks on DVD for Panther, as well as an upgrade disk (DVD again) for Tiger, therefore letting me use the External Firewire DVD-RW to install Panther, and if I liked I could go ahead and upgrade to Tiger (and if I didn't like it too much, or it slowed things down too much etc, then I could always go back to panther and have both available for future options). The extra RAM coming in handy here definitely.
So I was going to install the RAM today, and decided to go ahead and test out the External DVD to make sure it could boot from it (before making any changes to my system) and then go and install the RAM, and after that, install Panther to start... But I plugged all the cords and cables in, used my laptop with AC power even, and I could not get the External to show up at all... (kinda like the very current post right below mine but for the G4- it worked before, but now the firewire External just does not show up).
I only have USB 1.1 on this laptop obviously, and I don't even know if you could do a boot from an external with USB 2.0 if my laptop had it (the DVD player does). I was recommended to boot with an external firewire DVD or firewire to another machine with DVD capabilities to do the install. So my problem right now is getting slightly bigger, as of course, I can't seem to momentarily find the stuff that came with the External (spare USB cable to check and see if the laptop will recognize it at least with that and to show it is the firewire that is not working properly, or the disk that I used to install it -might have been only used to install Toast free version if it didn't need any drivers, but I don't know where that or the instructions for installation sheet currently is -- I am looking for it, but I have switched bedrooms just last week and I also seem to be missing a few other Windows laptop disks as well so there is a good chance that they are all together, I just need to figure out where, heh.)
I am waiting currently before installing the memory, though if I don't get the External working tonight, I may go ahead and do it first as at least I will have more memory on my laptop then, until I can get other stuff functioning and be able to do the Panther install.
But my main question is, is there something that would cause an installed external to suddenly not show up in OSX? Since I hadn't used it since that one day, and it was unplugged from the laptop itself, would that end up doing it, or more likely, the changing of the user accounts (though I have been trying to test it with different types of media and through both of my user account (which are both "admin" ones), though I do still have one of those being an account that was on there when the External DVD was first installed, so it really shouldn't have done this at all (one would think). So how big of a chance is it that the firewire has somehow gone dead and this is the main culprit to my wasting the past 4 hours on this???
I am currently scavenging around for an extra USB cable to try and test the External that way and will post the results when I can... I love the look and idea of macs, now I have a mac and want to upgrade it even, but why is it that whenever I attempt to use it after having not used it for a bit (and try to make the iBook feel better by using it more as I am sure it feels sad and alone sitting on the shelf while my Windows Laptop gets more attention), or try to fix it when it can be made better (and therefore used more often), the mac (all macs really), just seem to get all pissy and cause problems and make me spend hours upon hours trying to get things to work again??? You have to admit it, I am "mac cursed"... sigh I can program in 4 or 5 computer languages and am very advanced at many tech things (the ones I am not as good at I am still usually Average or Medium skilled) so it makes me wonder why I have so many tech problems with Macs when they are supposed to be the "easy" OS to use...

Actually, I think I have it all working now. After going back to the Plextor Website, I found out that the switch between the USB and 1394 ports only gets activated (switched over to the other) with you turn the device off first, move the switch and then turn it back on. I was sure that I had done this with the ibook, but maybe not as when I went back and did it with first the USB and then the Firewire cables, it did work. I definitely knew that I had not done this with the Windows laptop, the reason it would not have the USB work for me on it.
but back to the iBook, I was confused as it was only showing up as a DVD-ROM (which I guess is what they do until you actually open up the burning software to then be able to burn to it), and it also had the wrong Model #, which after more research, showed that it was the Internal DVD drive model version (PX-708A) compared to the actual model version (PX-708UF) which is the USB/Firewire (External) model. The firmware was really out of date as well (from June 2004 I think, v1.06) and they had v1.12 from Spet/Oct 2006 available so I went to get that (which was a hassle). They had nice easy Windows self extractor/installer packs, and then the BIN files for use for all systems (Sun OS/ Mac OSX/ Mac OS/ Linux etc as well as usable for Windows), and those needed a special Firmware Updater Application which was OS specific. Only I had the hardest time trying to get the OSX one as it would send me to a FTP site and not give me any clues as to which file(s) I needed to get and the Mac OS version was just for older 9.2 or below versions and didn't want to install under the OS Classic mode.
I ended up using my windows computer which made it easier to view with the FTP stuff as I have FireFTP in Firefox, and downloaded the files I thought I needed (to test out), and then realized my silliness, and just downloaded (as well) the Windows Auto Extractor/Installer as the Firmware is the same for all OS's, just the way to install/update it was different... So I hooked the DVD drive to my PC and updated the firmware, checked it out on here before moving it back to the ibook, where I checked that it still worked and had the new update version showing, which it did, and now I have my fully working and newly updated drive ready for the OSX installations... I had attempted to update my Jaguar system as well while online, but it had no new updates available (I guess those were all mostly Tiger updates that were just recently released).
I am now off to install my additional RAM, and after checking that it all shows up correctly, I will go ahead and do the Panther Install (and test it out and see if I like it or not).
For anyone that currently uses Panther on any mac, are there still any major problems I should know about before hand, or know about things that they have mostly fixed (like the issues with Firewire ports and External Drives that they had around the time Panther was first released for example)???
Thanks to all that helped... I now know to attempt an "eject" of any external HD (which I do have one that I will setup to use after I get Panther on the ibook) or CD/DVD drive instead of just unplugging the USB/Firewire cable.

Can I use USB external DVD Drive to boot up my G4?

My G4 (PCI Graphics) internal drive DVD-ROM is not working, its dead. I want to replace it with an External USB or Firewire Lacie DVD Drive.
According to Apple document http://docs.info.apple.com/article.html?artnum=58606, my computer cant boot up from Firewire devices. I think that means, I wont be able reinstall my Mac OS or install future systems or start my DiskWarrior from the CD. Using a external Firewire DVD Drive. Let me know if I am wrong?
Can I use a USB external DVD Drive to boot up?
G4 (PCI Graphics) 400 mhz, 488Mb Memory, 50GB, 9.2.2 & 10.3.9. USB 1.0 & Firewire 400 Ports
G4 (PCI Graphics) Mac OS X (10.3.9)

Hi, Harold -
Bad news - your G4 (PCI) model can not boot to either a firewire drive nor to a USB drive.
Although the G4 (PCI) models do have native firewire, they (and their cousins the B&W G3) are specifically exempted from firewire booting; there is no workaround for this -
Article #58606 - FireWire Booting
Relatedly, a G4 (PCI) machine can be the Host machine in a Firewire Target Disk Mode setup, but can not be the Target machine.
Article #58583 - Firewire Target Disk Mode
USB booting was introduced first on the G4 (AGP) model, and is not available on earlier Mac models -
Article #58430 - USB Info and Benefits of Dual-Channel USB
The only external drive your G4 (PCI) can be booted to is a SCSI drive - but that requires that the machine have an appropriate SCSI PCI card installed.
Replacing the internal optical drive might be the best choice, particularly for ease of maintenance and OS installing in the future.

I just bought a new mac mini and an external DVD burner. I want to burn a DVD video and it will not play on the TV but only on the computer? Need this figured out for tomorrow.

I just bought a new mac mini and an external DVD burner. I want to burn a DVD video and it will not play on the TV but only on the computer? Need this figured out for tomorrow. Can anyone help me?

Congratulations on the new Mini. Are you saying you tried burning and it does not play, or do you want to burn it only for the computer to be able to play it?
OS X Mountain Lion: Burn a CD or DVD may help.

I have a 2006 iMac. I am trying to hook up a LG external DVD writer. It doesn't appear on the desktop when I hook it up. Any suggestions?

I have replaced the internal DVD/CD drive twice in the last 1 1/2 years. Now when I insert a DVD or CD, it does not appear on the desk top or anywhere else. I can't eject it. I tried everything possible that I could think of. After a few weeks, the CD decided to eject when I started up my computer. I put another DVD in and this time it showed up on the desk top, so I tried to burn something to it and the computer told me there wasn't any device available to do such. Then I could not get it to eject. I tried shutting down the computer and starting it up, and the DVD disappeared off the desk top again. This time I was able to get it to eject sooner. I haven't put anything new in there since! I purchased a third party external DVD writer. When I hooked it up to the computer, nothing appeared on the desk top. I put the software disc in (which is windows, but I wanted to see what it did). It showed up on the desk top and let me open it up. I was able to eject it from the desk top. I then put in a blank CD to record music to. Since there wasn't anything on my computer for the new drive, I tried dragging and dropping the songs onto the CD and it appeared to be burning the CD, but when I put the CD into my stereo, it showed error. Many years ago I had a LaCie external drive because my computer didn't have one and it used Toast which was on my desk top. I thought this one was supposed to just work with iTunes, but I am not sure what I am supposed to do with it. Should the device appear on my desk top when I plug it in? Is there some kind of software that I am supposed to have? I am running version 10.6.8. Thanks!

The external DVD/CD Writer will Not appear on your desktop when you attach it to your iMac. It will appear in "Finder", which is in your Dock.
Hope this helps

Satellite Pro A120-144 - can I run Product Recovery from an external DVD/CD

DVD/CD Driver is not working properly. Is it possible to run Toshiba Product Recovery CD from an external DVD/CD player?

I don't think that is possible.
I tried it on my Tecra A8 and it only detects the internal DVD Drive, even if the internal Drive is faulty or missing.

Problems ripping with an external DVD Burner

Hello Everyone,
Recently I purchased a Liteon External DVD Burner off of newegg (http://www.newegg.com/Product/Product.asp?Item=N82E16827106011) -- It's a Liteon SHW-1635SX -- I bought this because the DVD-ROM drive thats in my tower natively is REALLY slow and I wanted to get a new one that I could use with a laptop that I`m going to purchase in the future. Whenever I try to rip a CD into iTunes using the burner, It says that it's ripping the disk, however it doesn't spin up the cd and it takes about 2 seconds to "rip" all the songs. I know this drive is soposed to be faster than my old one, But two seconds is a little TOO fast. Plus, I know that it's not copying the songs because when I try to listen to them in my library, the song won't play. (Under time it says "789:54..." for all the songs on the cd, in my library) However, the burner rips perfectly in Windows Media Player... Is this perhaps some kind of glitch with iTunes??? Basicly, the only way I can rip a CD into iTunes is to use my old DVDROM drive, but that defeats the purpose... below is the CD Diagnostic log that I got from iTunes::::::::
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
HP Pavilion 05 P9859A-ABA 533w
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: PxHelp20 (2.0.0.0), AFS2K (3.1.21.0), DRVMCDB (1.0.0.1), SSCDBHK5 (1.0.0.1), PFC (2.5.0.196),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: Intel(R) 82845G/GL Graphics Controller\Intel(R) 82845G/GL Graphics Controller
IDE\DiskMaxtor4R060J0_________________________RAMB1TU0, Bus Type ATA, Bus Address [0,0]
IDE\DiskST34323A_______________________________3.02___, Bus Type ATA, Bus Address [1,0]
IDE\CdRomCOMBIRW16x10/DVD_______________________H1.0___, Bus Type ATA, Bus Address [0,0]
USBSTOR\CdRomLITE-ONDVDRW_SHW-1635SYS0Y, Bus Type USB
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Check the Windows Update website to verify that you have the latest service packs and patches for your OS. Service packs affect the performance of USB and firewire CD / DVD drives.
Current user is administrator.
E: COMBI RW16x10/DVD, Rev H1.0
Drive is empty.
F: LITE-ON DVDRW SHW-1635S, Rev YS0Y
Audio CD in drive.
Found 9 songs on CD, playing time 42:13 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:30:07
Track 3, start time 08:44:33
Track 4, start time 12:03:74
Track 5, start time 17:55:53
Track 6, start time 22:14:31
Track 7, start time 25:32:60
Track 8, start time 30:13:01
Track 9, start time 35:59:06
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 8 16 24 32 40 48.
The drive CDRW speeds are: 8.
The drive DVDR speeds are: 8.
The drive DVDRW speeds are: 8.
The last failed audio CD burn had error code -128(0xffffff80). It happened on drive E: COMBI RW16x10/DVD on -128(0xffffff80) media at speed 0X.
Your replies are greatly appretiated!
--Aric--

hi Aric!
hmmm. we'd better check on the usual suspects with that. (the incredibly long song times can also be associated with these sorts of causes.)
You can't import or play music from an audio CD in iTunes for Windows
... and the following resources might be helpful with that. (check on firmware and drivers even though it's a brand new unit.)
Using CD Diagnostics in iTunes for Windows to troubleshoot CD/DVD drive issues
iTunes for Windows: Updating the firmware on your CD or DVD drive
Updating the drivers on your Windows PC
Where to find firmware for your CD/DVD drive
love, b

How do I burn a DVD on my new iMac to play on external DVD player

I have a new iMac at work (3.5 GHz Intel Core i7), running on OS X Yosemite, and I'm trying to figure out how to burn a DVD that can be played on an external DVD player. I have a disc burner connected, but just noticed that iDVD (the way I used to burn video files) is no longer part of my installed applications.
Thanks for any help.
JC

If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailier like Amazon.com: ilife 09: Softwareor eBay.com. Why, because iDVD (and iWeb) was discontinued by Apple over a year ago.
Why iLife 09 instead of 11?
If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides themes from iDVD 5-7. The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them.
Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
This shows the iDVD contents in the iLife 09 disc via Pacifist:
You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
If you're creating a slideshow in iPhoto and want to add it to an iDVD project export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar. Select Size = Medium or Large.
Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
Follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.

How do I use iMac as monitor for external DVD player (HDMI to Mini DisplayPort)

iMac 27" (late 2009). Internal DVD is region locked. I would like to use an external DVD player to watch DVD's from other regions.
I can't use the new Apple SuperDrive because they say it's not compatible with iMac's before 2012. (Is it??)
My iMac doesn't have Thunderbolt. It has mini displayport.
I have resigned to getting a generic DVD player and plugging it into the screen.
I have found this in Apple support pages...
Can I use the iMac in TDM as a display for my gaming console, DVD player, or other device?
The Mini DisplayPort port on a supported iMac can receive DisplayPort compliant video and audio signals. Converters not made by Apple may provide options to convert other electrical, video, and audio protocols to Mini DisplayPort or Thunderbolt compliant signals.
( http://support.apple.com/kb/HT3924 )
What is DisplayPort compliant video and audio signals? Does HDMI fit into that signal type?
Is it possible to get an HDMI to Mini DisplayPort converter?
Will it work if I get a generic DVD player with HDMI output? (and connect it to the iMac through MiniDisplayPort)

First try VLC.
<http://www.videolan.org>
On many Macs, it will play DVDs even if the region codes don't match.
The Apple SuperDrive should work if you use the terminal (Utilities foldsr) command:
sudo nvram boot-args="mbasd=1"
There are also non-Apple USB or FireWire external DVD (and Blu-ray) drives, such as:
<http://eshop.macsales.com/shop/optical-drives/superdrives/>
Apple's DVD player may not work with external drives, but you can use VLC or Blu-ray™ Player
<http://www.macblurayplayer.com>
There is a converter to connect HDMI to the iMac via TDM
<http://www.kanexlive.com/xd>
but it will run at 720p (1280 x 720) and may have problems with HDCP (High-bandwidth Digital Content Protection) on HDMI from Blu-ray or DVD players.

External DVD to Inspire 6700

Similar Messages

Maybe you are looking for