External Ethernet/NAS Hard Drive with Time Machine

Hi,
I'm going to be purchasing a Mac Book Pro once leopard is launched and I'm wanting to get an external hard drive to back up using Time Machine. Now, I'm wanting to set this up through a wireless router so that a can make my backups without having to remember to connect every so often.
Does anybody know if Time Machine works via NAS/Ethernet as the Tech Spec of Time Machine just mentions USB and Firewire? I presume it will work, as it would seem a little daft if it doesn't.
Following on from that, does anybody have any recommendations for external NAS/ethernet hard drives? I was wanting something from 250GB to 500GB. I have seen this one -
http://www.dabs.com/productview.aspx?Quicklinx=4J9D&SearchType=1&SearchTerms=ext ernalhard+driveethernet&PageMode=3&SearchKey=All&SearchMode=All&NavigationKey=50473
And this one -
http://www.ebuyer.com/product/128482
Any help is very much appreciated!

Yes, networked drives, servers, etc., will work as a Time Machine target -- all it needs is a folder it can write to. I'll leave the drive recommendation to someone else.

Similar Messages

  • How do I recover lost files off my external WD Passport hard drive with Time Machine?

    I have been backing up my Macbook Pro with Time Machine and my Western Digital Passport since May 2010. I accidentally deleted my music in February of 2011, but had backed it up with Time Machine. Now when I try to go back and recover the files in Time Machine, they are gone. Nothing is available past June 2011. How do I recover those files?

    About TM "Backup Drive is Full"
    Alert TM only deletes older files if they have been deleted from the source and when TM needs space on the backup drive for a new incremental backup. Time Machine "thins" it's backups; hourly backups over 24 hours old, except the first of the day; those "daily" backups over 30 days old, except the first of the week. The weeklies are kept as long as there's room.
    So, how long a backup file remains depends on how long it was on your Mac before being deleted, assuming you do at least one backup per day. If it was there for at least 24 hours, it will be kept for at least a month. If it was there for at least a week, it will be kept as long as there's room.
    Note, that on a Time Capsule the sparsebundle grows in size as needed, but doesn't shrink. Thus, from the user's view of the TC it appears that no space has been freed, although there may be space in the sparsebundle.
    Once TM has found it cannot free up enough space for a new backup it reports the disk is full. You can either erase the backup drive and start your backups anew or replace the drive with a larger drive.

  • AEBS Ethernet NAS Hard Drive + USB Time Machine Backup

    Hello,
    I currently have an Airport Extreme Base Station, which I utilize the USB port for Wireless Time Machine Backups. However, I would like to know if it is possible to connect a NAS drive to the AEBS via Ethernet and still use the USB port for wireless backups for multiple Mac laptops simultaneously. The backups must also include whatever is on the NAS drive. Is this functionality possible?
    Thanks!!

    infamousirshad, Welcome to the discussion area!
    ...I would like to know if it is possible to connect a NAS drive to the AEBS via Ethernet and still use the USB port for wireless backups for multiple Mac laptops simultaneously.
    Yes
    The backups must also include whatever is on the NAS drive. Is this functionality possible?
    No. Time Machine does not backup data FROM any network drive.

  • Hi, ive been backing up my computer to an external hard drive (with time machine). When i buy a new macbook will that hard drive put all my info on to the new computer?

    hi, ive been backing up my computer to an external hard drive (with time machine). When i buy a new macbook will that hard drive put all my info on to the new computer?

    When you boot the new machine for the first time, you'll be prompted to import your data from a Time Machine backup.

  • If I already have an Airport Express Base Station, can i hook an external hard drive into it's USB port and use that hard drive with Time Machine?

    If I already have an Airport Express Base Station, can i hook an external hard drive into it's USB port and use that hard drive with Time Machine?

    No, and that shouldn't be done with an AirPort Extreme or Time Capsule.
    (66017)

  • Accessing back-ups on external hard-drive with Time Machine.

    Hi guys,
    I hope someone can help me with this problem. I am a novice at this so please be patient and forgive my ignorance.
    I backed up the internal hard-drive of my '06 iMac onto an external Iomega 500GB hard-drive using Time Machine.
    A couple of weeks later the internal hard-drive of my iMac fried and I got the " grey screen of death ".
    Now I have the external hard-drive connected to my '06 MacBook.
    There is 300GB of data on the external hard-drive. There is only 50GB of space available on my MacBook.
    I would like to access my iPhoto on the external hard-drive but when I click on the iPhoto icon in Time Machine, I get "error code 10657 ".
    I am NOT trying to do a full restore of the back-up onto the MacBook because :
    1. There is not enough space available on the MacBook and
    2. I will do a full restore when I have bought and installed a new bigger hard-drive into the iMac.
    So, I guess my question is this : Is it possible for me to access my iPhoto on the external hard-drive using my MacBook without doing a complete transfer and if so, how ?
    Thanking you in advance,
    Sean.

    If this is a network device, you can't back it up with Time Machine. If it's directly attached, and in Mac OS format, delete it from the exclusion list in the Time Machine preference pane.

  • Can I use a non apple wireless hard drive with time machine?

    Can I use a non apple wireless hard drive with time Machine?

    Some NAS (network storage) systems do claim to support Time Machine, with varying levels of success. For example, the Synology units have this feature. They're not officially supported by Apple, though.
    Matt

  • Can't restore my data from hard drive with time machine

    So basically I recently backed up my things on an external 1TB Seagate hard drive via Time Machine on my Mac. I then restored my Mac to its factory settings. However when I plugged in my hard drive it didn't show up in my finder. I opened Disk Utility and it shows up there but when I tried to restore my data it wasn't able to find it. This is so weird and I'm so scared can someone please help me

    vanessayu wrote:
    And another thing, my mac is randomly turning off and then displaying a gray screen saying your mac shut down because of a problem. does this have someting to do with the disk
    Sounds like the TimeMachine drive is defective.
    Uplug it and reboot and see if your problems go away.
    If your TimeMachine is broken it might be possible to do data recovery on it, you can take it to a local PC/Mac tech and they will image it so the files are accessible, then you can pick through the mess as long as it wasn't encrypted or Filevaulted.
    TimeMachine uses a lot of placeholder files, basically the same name but minus the content of the files for each saved state.
    It's a lot of work going through all the folders to find your original files but as long as the drive works the files should be able to be recovered.
    Sorry about your problems, TimeMachine hasn't quite lived up to it's expectations and I try to warn everyone NOT to completely trust it.

  • I restored my hard drive with time machine but when I log in I get "home folder protected by fire vault and needs to be repaired. But I can't get past the regular log

    I restored my hard drive with time machine but when I log in I get "home folder protected by fire vault and needs to be repaired. But I can't get past the regular log

    Maybe you might find some info to the right>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

  • I recently purchase macbook air with OS 10.10.2. I want to use my Seagate external backup plus hard drive for time machine back up. How to partition my 1TB Seagate back up plus hard drive for use with mac and windows pc?

    Hi All,
    I recently purchased 13" Macbook Air with OS 10.10.2. I want to use my 1TB Seagate backup plus external hard drive as time machine and my windows 7 pc. Please suggest a method. Thanks in advance for your reply.

    I strongly recommend having an external drive dedicated solely for TimeMachine. You could partition the drive but if something goes wrong you risk losing the data on both partitions. Should you decide to go ahead with splitting the drive for two different uses you’ll need to partition the drive either using the Mac’s built in Disk Utility program or Windows utility. I believe the built in Windows disk utility program will destroy the current partition and erase the data that’s on it - I use a third party Windows disk utility program for partitioning and it allows for non-destructive partitioning but warns to back up data first just in case. Apple’s Disk Utility can do non-destructive partitions but I don’t recall every trying to do a non-destructive partition on a disk originally formatted for Windows using it. Again - back up that data just in case.
    Finally, your TimeMachine drive should be at least 1.5 times (I prefer 2 times) the size of the data you expect to be backing up a year or two from now.  In other words, if you currently are using 50GB of your computer’s drive but expect to begin purchasing Mac software to replace software on your Windows computer and if you expect to be putting photos, music, and other data on it you might expect that two years from now you’ll have 100GB of stuff on the drive. So a 200GB partition is the smallest size you’d want.  TM’s backup scheme keeps multiple copies of data as it changes so the extra room is important for this scheme.

  • Restoring an external hard drive with time machine

    I'm having a problem restoring an external hard drive using time machine. I'm on a macbook Air Running 10.7.5.
    The external hard drive where I store all my photos crashed a few days ago. Not a total disaster, because it's backed up, but I can't figure out how to restore the drive onto a new hard drive. When I go into time machine without the corrupted drive attached, it does not show up in the time machine browser as an option for restore. (The files are definitely there, though, because I can see them when I look at the time machine files in Finder. I'm afraid if I just transfer the files by dragging, though, I'll mess something up.) I tried using the migration assistant, but I'm having the same problem there.
    Anyone know how to do this? I'm a little frantic to get my photos back.
    Thanks!

    I am having a similar problem.  I use a  Lacie external hard drive connected to an Airport Time Capsule via USB to store my itunes library.  Yesterday I disconnected the external drive from the ATC and connected it to my macbook pro via fire wire to transfer 40 gigabytes of media files from my laptop to the external drive directly rather than over wifi.  When I reattached the external drive to the ATC the Lacie drive didn't show up even after rebooting everything. I then disconnected from the ATC and reconnected to the laptop and now I get an error message saying the Lacie disk is unrecognizable and needs to be reformated.  The Lacie drive was being included in the time machine backups so the files should be available through time machine but I don't see anyway to access them because the Lacie disk icon doesn't appear in the time machine backups.  Is there another way to browse the files?  
    I have had issues with Lacie disks not showing up on the desktop before, particularly when transferring files from one computer to another.  The transfer usually goes fine but then when I reattach the drive to the first computer it isn't recognized anymore until I reboot and it sometimes requires a couple of reboots.  I initially tried to connect the external drive to both the ATC and the laptop but that didn't work, although now I'm wondering if that was because the connection to the laptop was firewire rather than USB like the ATC.  In any case I currently have over a terabyte of data on my lacie that I can't access which includes my entire itunes library and backup files from multiple computers which were "cleaned" but not restored. 
    Disk utility sees the drive but can't verify or repair and tells me to backup as many files as possible and then reformat.  Unfortunately I can't see ANY files to backup because the disk won't mount anywhere.  If anyone has a recommendation for utilities to recover the files I'd be most grateful to get them.

  • Is there a way to backup my external hard drive with Time Machine?

    Most of the memory used on my MBP is mainly used for applications and miscellaneous things for Logic and Final Cut. I have two external HD's. To save space on the internal HD, all of my music, pictures, and videos are one my external hard drive, while Time Machine set as the other. Is there a way I can back up my external HD using Time Machine? What would even be better is if I could only select specific files (My Music, Videos, Pictures) and not everything on my one external HD to be backed up in Time Machine.

    TM can back up external HDs. If you have both of your external drives attached, go to the options in TM preferences. Be sure the data drive is not listed (this lists drives/folders to exclude from a backup). Then initiate a TM backup or wait for the hourly backup. That should back up the data drive.
    You can only tell TM what to exclude from a backup, not what to include.

  • Why does my Mac ask for my password when I try to make a change on my external hard drive with Time Machine?

    I recently formatted the hard drive to do a fresh install of Mavericks on my Macbook Pro Retina. I then formatted my Western Digital 2 TB External Hard Drive for Time Machine. I then began storing others files and folders on the external hard drive along side the TIme Machine Backup folder. Everytime I added a folder or changed a foler name it asked for my password.
    This has never happened to me before using any other OSX.
    I apologize if this has been resolved before, I'm new to the communities and have yet to find a solution.

    It is not a good idea to be storing other Stuff on your Time Machine drive. You may need an additional separate hard drive for those things.
    Once you tell Time Machine to use a Drive, Time Machine owns the Drive. You (as a User) do not have permission to put things there. If you insist, it will do it, but wants your Admin password to do it.

  • Can I use any external hard drive with Time Machine?

    I have a 1TB external hard drive and also a 16GB flash drive. Is it possible to use either of these with Time Machine?

    IMO Time Machine should be on its own Dedicated External Drive... one that is twice the size of the drive that it is backing up... the 16 GB Flash Drive is not appropiate for the task.
    See Here
    TM 101
    http://support.apple.com/kb/HT1427
    You may also find this Link of Interest...
    Time Machine vs. Clones and Archives

  • Backing up an external storage hard drive with time machine

    I have a setup with an external hard drive on which I store photos etc. I also back up my desktop with time machine to a separate external. I want to back up my photo drive to this external through time machine and a tech at the apple store showed me how to remove the external drive from the excluded list and include it in the regular time machine backups. When I go to set this up with my own computer however, the - symbol is greyed out and I am unable to select the hard drive. If anyone has any solutions I am all ears!

    redrubi1234 wrote:
    When I go to set this up with my own computer however, the - symbol is greyed out and I am unable to select the hard drive.
    If it's listed in gray, not black, it means the disk isn't formatted +Mac OS Extended,+ and Time Machine cannot back it up.
    You'll have to copy the data elsewhere temporarily, reformat the drive (see #1 in [Formatting, Partitioning, Verifying, and Repairing Disks|http://web.me.com/pondini/AppleTips/DU.html]), then copy it back.

Maybe you are looking for

  • ER:  Connections in project/workspace scope instead of global

    I would like to point out a problem which could be fixed in the next release of JDeveloper. I think it should be possible to define connection (application server and database) at the project level. That would ease team based development. We have had

  • Total label in ALV GRID.

    Hi I want to display a label in the first column of the totals Row in the ALV. I am using do_sum = 'X' in FieldCatalog. I tried using layout-Totals_text = 'Totals in Million'. but still it is not appearing. The Datatype is char(60) for first column.

  • How to use the Rc4DLL.dll with java (jre1.4 )

    I am not able to use Rc4DLL.dll with java, there are some characters (encrypted using Rc4DLL.dll) that java is not able to identify. So while decrypting in java using Rc4DLL I am not getting the desired output (as some character java tries to decrypt

  • JButton as TAB function : Urgent Help

    Hi people, pls i need some help... I have an interface that displays html pages in a JEditorPane. I want to be able to tab within the html page displayed in the jeditorpane and outside the jeditorpane to the other button components using my own JButt

  • "You are running on reserve power" error message

    I am suddenly getting the error message "You are now running on reserve battery power" every time my PowerBook is unplugged, even with as much as 45% of the battery left. There is an article about this on the tech support web site, but it says it app