External field addition in smartforms

Hi dis is vinod.I want information regarding adding a field in smartform without disturbing
actual print program as we can do in scripts using 'ITCSY' structure ie using subroutine.can we add a field like that or not.If so how can we go ahead.
Thanxs
vinod

HI vinod,
can u please littilbit clear wht u want to add..
u can insert text or data vriables even select quries in smartform without distrubing the print program.
If u can tell wht exactly u want to do. then may be i can help u.

Similar Messages

  • External field catalog & Info object catalogs - Role - in Flexible upload

    1) What is the role of Info Object catalogs maintained in the Data Basis & the Source Data Basis?
    Please be kind enough to mention a scenario u2013 underlining their utility in the consolidation process.
    Like u2026.
    Are they used for loading master data from source system to the BCS system?
    Can they be used in the flexible upload u2013 data collection function?
    Are they used for as a source of AFD data?
    I came across the below documentation on flexible upload - in an SAP material.
    *When uploading from a field catalog, you also have the option of using mapping. In this case, the file structure no longer has to correspond with the structure of the data basis.*
    Understood the above 2 points.
    *Rather, you can assign a BW InfoObjectCatalog that acts as the data structure description for the file here. You specify this InfoObjectCatalog in Customizing for the data basis.*
    2)Does the above statement implies that we need not do any setting in the field catalog tab of the flexible upload? If yes, what do we do?
    In the flexible upload u2013 field catalog tab u2013 we define the data structure for the file we upload (correct me if Iu2019m wrong).
    If you use an external field catalog, you have to specify how you want to map the data structure for the file to the structure for the data basis.
    3)Pls give an example of an external field catalog.
    4)Can we use an external field catalog in the upload of RFD?
    Many Thanks
    Kind Regards,
    Kumar

    There are two possibilities of using Infoobject catalog in SEM-BCS (it is true for both catalogs, characteristics and key figures):
    u2022     In a data basis. The system adds these chars and KFs that are sitting in the defined in the Data Basis catalogs to u201CAdditional Fieldsu201D of each data stream (the tab strip u201CData Stream Fieldsu201D in data basis. If you check some of these fields and generate data basis, these additional infoobjects will be placed into appropriate ODS/DSO objects and you will be able to use them for uploading of some extra information.
    Without indicating the Infoobject Catalog for Chars youu2019ll not be able to configure a new functionality of "assets/liabilities" at all.
    u2022     In a source data basis.
    After including source data basis to your data basis youu2019ll be able to use external infoobjects catalog in a method of the category Flexible Upload. Tick the flag of using the external catalog and choose the SDB. In the mapping tab youu2019ll have a possibility to choose from those chars and KFs that are located in the catalogs.
    This might be used for upload of ANY data, RFD, AFD or master data.
    The scenarios, I guess, are rather obvious.
    Hope this helps.

  • Custome field addition in production order

    Hello All,
    I want to add one custom field in production order. My abaper tried "PPCO0012 enhancement for displaying/changing order header data" enhancement and SAP version is 4.7. But it is inconsistent. Can anyone suggest me other way to add one field. I want to add new field as " New revisio level"
    Regards,
    Mayur

    Why not try defining a new user status?
    In this user status you can set/reset the desired "new revision level"( if its the matter of only one field addition).
    Futher you can constraint any business process - if at all required based on this new user status.

  • External field name

    In our implementation we have the info object for the article to be 40 as the characteristic string length, the actual length of the article is 11 digits so when we see the article in the MPOS (as a part of the CVC)  in the internal format it is getting the 11 digits and adding the leading zeros for completing the 40 characteristic length.
    when we look at the external format of the article it just shows me the 11 digits in the MPOS, it is not a problem when the article number is starting from a number that is non zero but it is a problem when the article number starts with 0 because then it is taking it as the leading zero and only showing the 10 digits in the external format in the MPOS.
    FOR EXAMPLE:
    case1:
    article number is 12345600000
    internal format is 00000000000000000000000000000012345600000
    external format is 12345600000
    case2:
    article number is 01234500000
    internal format is 0000000000000000000000000000001234500000
    external format is 1234500000
    is there a way to ensure that we can have the external field name of the article for 11 digits for sure because that would allow me to see the 01234500000 as 01234500000 and not as 1234500000
    Thanks in advance

    Hello APO APO,
    I think your InfoObject was set to use conversion exit ALPHA. I believe this conversion exit is not suitable for your case (as you described). One possible solution is to create your own conversion exit which will make sure that the 11 characters in your article will be kept. You can then assign this conversion exit to your InfoObject in transaction RSD1.
    To create a custom conversion exit, simply create two function modules in SE37:
    1) CONVERSION_EXIT_Zxxxx_INPUT
    2) 1) CONVERSION_EXIT_Zxxxx_OUTPUT
    You can replace "xxxx" with any string you like. You can see some sample coding by  looking at CONVERSION_EXIT_* functions in SE37.
    Hope this helps.

  • Reference field in the smartform

    hello,
    can you help me to specify reference field in smartform.
    That means,
    i had created the structure in which there is a field VEMNG for which the reference field is VEMEH from reference table VEPO.
    Then i had written the program and created the internal table of type that structure and call the functional module which is calling the smartform by passing the internal table.
    Now after executing it is giving runtime error as VEMNG is not present in the smartform. That means we have to specify the reference field in the smartform for that field.
    i had specify in the smartform-global defination-currency/qty field as
    VEMNG  VEMEH   QUAN as field name, reference field and data type.
    But the error has come while doing syntaz check in smartform and the error is :- Global Definitions:Field "BRGEW" is unknown. It is neither in one of the specified tables nor defined by a "DATA" statement . . . . . . . . . .
    Please help me to resolve this error in the smatform.

    Hi ,
    If you r passing quantity and currency fields to smartforms then in
    Globaldefinitions-> currency fields
    u have to specify the fields as well as its uniot field .
    For example u r using field erfmg or menge then u have to use
    fieldname = it_itab-erfmg   and reference field as   it_mseg-erfme
    field name = it_itab-menge and reference field as it_mseg-meins
    and change the data type to curr  or  quan  as required .
    Regards

  • Set External Field Value by Workflow

    Is there any way to Set External Field Value by SPD 2013 workflow?

    Hi j.kiani,
    According to your description, my understanding is that you want to update an external column in a list by SharePoint workflow.
    I did a test:
    Create a list with an external column
    Create a workflow , and add ‘Set Field in Current Item’ action, select the field is the external column, set the value to a value from the External Content type data source
    Publish the workflow and start it on an item
    The external column was changed to the value that I set in workflow. However, when I refreshed the external column by clicking the ‘sync’ flag, the data was changed to the old value.
    I used ‘Update ListItem’ action, the result was same
    It seems that there is not an OOB way to change external column with SharePoint workflow. You can change the external column by SharePoint web OOB way (Editing item) .
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • What does "into corresponding field" addition used for?

    What does "into corresponding field" addition used for?. I have seen them in open sql statements. Please explain?

    before knowing this you have to know how u write select in ABAP....
    think you have a str./internal table itab with this strucutre:
    data: begin of itab occurs 0,
             vbeln like vbak-vbeln,
             posnr like vbap-posnr,
             netwrt like vbap-netwrt,
           end of itab.
    u have to follow the same order in the select statement...
    select vbeln posnr netwrt
    from vbap
    into table itab
    where......
    Think that u had some concern and coudnt write a select in same order then u write it like this...
    Performance wise its very bad...so ppl generally try to eliminate it..
    select  netwrt posnr vbeln 
    from vbap
    into corresponding field of table itab
    where......
    Award points if helpful

  • Field Addition in Report Category

    Hi All,
    I Need to Add Additional Selection Field in Report Category.
    Ie : In My case For TCODE : S_AHR_61016354 - Telephone Directory ..
    For this SAP STD report I need to Provide PA0105-USRID Field in report Selection.
    How to Add this field in the report Selection.
    Thanks
    Partha.

    Hi,
    Copy the Standard report and change the selection screen accordingly and insert the logic which you require to change. Do not change standard programs.
    Thanks,
    Vasu.

  • Add editable fields in a smartform

    Hi,
    I'm working with smartforms and i wonder to know if its possible to create a kind of blank fields that allow the user to insert some free text right before print the form?
    Thanks a lot in advance,
    Nuno Moreira

    Hi Manuel,
    Thanks for your reply... I'll do it.
    Best Regards,
    Nuno

  • Currency and quantity field allignment in smartforms

    hi experts
       i am facing problem in smartforms allignment for currency and quantity fields. these fields are not coming exactly on the same line of the other fields with char types. please help me resolving it.
    Moved to Crrect Forum
    Edited by: Vijay Babu Dudla on Apr 6, 2009 4:38 AM

    &wa_vbap-kwmeng(C)&
    adjust with left and right alignment.
    it will definately work.
    what happend? isn't ur problem solved?
    Edited by: MONIKA DHUMAL on Apr 6, 2009 4:38 PM

  • Ext.Reference field addition in ZMHF [Urgent change]

    Hi Experts,
    We have implemented ChaRM [Solman 7.10 -Sp10]and its woking fine and we need to include the additional field "Ext.Refernce" in ZMHF transcation type[Urgent Change].
    Please let me know, how to include the field in ZHMF in Urgent Change.
    Thanks & Regards
    Elumalai

    Done.
    Thanks

  • Field addition

    How to know if ane new fields are added matl. master ?
    In our system some new field were added, we need to know how many new fiels are added like this ?
    pl help
    guru

    Hi,
    At the display changes screen, system will show all the changes made to the material master in question. Hence you will be able to track every change (addition of any field, change in any field) in the material master.
    Regards,

  • Enhancement in VA01 (Custom field addition in Additional Tab at header)

    Hi Experts,
    I have to develop some custom fields in tcode VA01 at header level in addtional data B tab. I know that i can use access key and develop the screen 8309 of program SAPMV45A and for that i have to provide access key. But i dont want to use access key.
    Is there any screen exit or badi through which i can develop the screen in additional data B tab in VA01. Please provide me suggestion.
    Thanks in advance.
    Regards,
    SURYA BASU

    Hi
    I don't know other solution. Provide a key in my opinion is not a problem. You must do it when create your own VOFM subroutines in your customer range number. if your boss or your client has doubts, ask him/her to see the SAP Note 381348 - Using user exit, customer exit, VOFM in SD, when it says:
    At the beginning of the R/3 development the SAP Basis did not offer
    technologies for exits yet, nevertheless many customers wanted to implement
    their own functions, checks, and so on. Thus, in the SD area, includes were
    delivered like, for example, MV45AFZZ. This include contains some empty
    FORM routines (user exits) to which you can go from the respective
    processing programs.
    and
    Changes to user exits in SD are MODIFICATIONS,
    since the original of an object belongs to SAP (thus when you change a user
    exit an SSCR registration is also required).
    Why this exits belongs to SAP, see Note 16466 - Customer name range for SAP objects.
    I hope this helps you
    Regards
    Eduardo

  • OM INFOTYPE ENHANCEMENT (  FIELD ADDITION)

    Hi Experts,
    My requirement is to add field in PO13 based on the subtype selected, Once the entry is saved , the HRP1002 is to be updated.
    Please Help me . Thanking you in advance.

    Hi,
      I think u have 2 make things in SPRO.
      U have 2 make entry in Restrict country grouping.
      or check it in T500L table whether the country entry
      is there?
      If u need any additional info get it from Basis
      consultant.
      Hope it will work.
           Manian.

  • Field symbols in SMARTFORMS

    Hi all,
        I have to show the Item wise amount in a Purchase order thro SMARTFORM. I don't have any problem when the purchase order has currency 'INR'. But when the Purchase order contains foreign currency, I have to show the amount upto 4 decimals. How can I show amount upto 4 decimals only when the amount is in foreign currency?I have tried to create a field-symbol with type ANY.But it's showing error.Please help.

    try this
    &symbol(.N)& Display upto N decimal places
    other options:
    &symbol(Z)& Omit Leading Zeros
    &symbol(S)& Omit Leading Sign
    &symbol(<)& Display Leading Sign to the Left
    &symbol(>)& Display Leading Sign to the Right
    &symbol(C)& Compress Spaces
    &symbol(.N)& Display upto N decimal places
    &symbol(T)& Omit thousands separator
    &symbol(R)& Right justified
    &symbol(I)& Suppress output of the initial value
    reward if helpful

Maybe you are looking for