External Firewire Drive Will Not Boot with 10.5.1

I have a Intel Mac Mini and I tried to install Leopard onto a external Firewire Drive. I have done this with 10.4.11 and all works well. The Mac Mini is running 10.5.1 on it's internal drive. I attached the Ext FW drive 320 GB and formatted it using 'Disk Utility' GUID format. I next installed 10.5.0 on the Ext FW Drive. I can shutdown and reboot with 10.5.0 using the firewire drive as the booting drive. I next installed the 10.5.1 update and when it completes it requests a restart, I restart it and it never boots back up just the Grey-Apple screen.
I have left it sit for a long time in this 'trying-to-boot' mode for a longtime because I know 10.5.1 may restart more than once on initial install. but nothing. I have also tried partitioning the drive into 3 40-80-180GB drives, but still the same behavior.
Any suggestions?

Went through the motions on that. No positive results. I'm starting to suspect either the enclosure or one of the latest updates.
This what I have found to date.
The Enclosure " Vantec NexStar 3" extrenal USB 2.0 and Firewire. Model NST-360UF-BK
The Drive Seagate Barracuda 7200.10 320 GB IDE Drive
I tried 10.5.0 on an Intel Mac Mini. (GUID format) It boots ok. Install 10.5.1 manually downloaded or automatic it will install the update but will no reboot.
(this part I have to verify a second time) tried the same enclosure on a G4 . I attached the drive formatted it for a PowerPC install and boot. Installed 10.4.10 but not the latest security updates, JAVA, and QT. It will boot ok from the external FW drive. I next install the latest Updates via the update app in the Systems Preference window. After doing the updates for 10.4.10 it will not boot.
So I'm suspecting either the enclosure or the latest updates

Similar Messages

EXTERNAL USB Drive will not open with Snow Leopard

External USB drive will open with SL. The drive icon appears on the desktop. When I click on it, Error message, "The alias USB Drive can't be opened because the original item can't be found." When I click on "Fix Alias", a window pops up and shows the usb drive in a list but does not respond when I click on it. I then tried disk utility and tested the disk and it tested OK. The drive still will not open. This problem started after I installed Snow Leopard. Need Help.
Message was edited by: PHAT ROB

The same error is produced when I try to mount a smb share.
I select the "connect to server" (cmd-K). Input the share info "smb://<user>@<server>/<share_path>
At the auth prompt, I input my credentials.
The error pops up, same as original poster.

My external hard drive will not mount with my mac?

Okay so everything was working out great till the new OS came out. Then i ran into some problems. I can no longer back up anything i have on my laptop anymore because my external will not pick up in finder-desktop-etc. I need help as fast as i can because i need to back up, its been 50 days and my computer is filled with pricless photos and videos that i would like to save.
Please help!!!!

No it does not, sorry that this responds took so long

External FireWire Disk will not boot

Hi Forum,
after some installations (OS 10.4.9, latest security update and Qucktime 7.1.6 I canot boot from my external disk (Lacie) connected to FireWire 800 port. The Apple shows up but then nothing more happens. Does anyone have a hint?
Thanks
Oliver

Add me to the list also. I had an external firewire disk as a RAID mirror for my boot disk. After a system crash (and some problem with my internal disk) I couldn't boot from the firewire stripe. This used to work.
I've tried creating a single-disk "degraded RAID pair" on the external disk and cloning the internal disk to it (using Disk Utility "Restore"). The cloning works fine but I can't boot from the copy. This is how I originally set up the RAID pair (clone, boot from clone, add internal disk to RAID group). This used to work. I bought a new firewire disk and it has exactly the same problems.
My original firewire disk was an Acomdata E5. My new firewire disk is a Coolmax Gemini CD-311 enclosure with a Hitachi 250GB deskstar inside.
iMac G5 Mac OS X (10.4.9)

Firewire Drive will not boot

I connect a FW HD and select it as my start up drive. It has recently been upgraded to Mac OS X Tiger from Panther. This problem started when panther was installed, but upgrading to tiger didn't resolve it. I can't boot from this drive like I used to. It is still useable as a HD, but I'd like to be able to boot from it.

When you last formatted the drive, and mounted it in the Finder, did you make sure that Get Info's Ignore Privileges was not checked?

External firewire drive fails to boot OS X after restart

I have a G4 Cube that exhibits a perplexing boot issue on an external firewire drive. The external drive is a clone of the Cube's internal dual boot, two partition drive made with an identical 120 GB Seagate. The internal drive boots without incident into either OS X or OS 9 - each in it's own partition.
The problem comes when I select the external drive's OS X partition in Startup Disk and restart - the external drive's activity LED shows an initial attempt to boot but then hesitates and boots to the internal OS X partition repeatedly.
As a workaround, I am able to select and boot to the OS 9 partition, either internally or externally, launch the StartUp Disk control panel, select the external OS X partition and reboot successfully into that partition. But upon a restart, it fails to boot into the external OS X partition repeating the aforementioned behavior i.e. it boots to the internal OS X partition.
Using Option-Restart shows the the two partitions on the external drive and the two partitions on the internal drive normally but will only successfully process selecting either of the two OS 9 partitions or the internal OS X partition, again failing to process a selection to the external OS X partition.
Interestingly, this same external firewire drive will repeatedly boot to it's OS X partition without incident using either of two iBook G4s.
I'm stumped!

Hi, LEOinDC -
How old is the internal battery in that Cube? Many machines exhibit boot anomalies if that battery is too weak or dead.
Those batteries have an expected life of about 4 to 5 years under best-case usage; if the machine is unplugged regularly or for an extended period, the battery is consumed much faster. Even if the machine is not unnplugged the battery will eventually die, and there will be no symptoms such as loss of date or time since the trickle power drawn when the machine is shut down (but still plugged in) will maintain those.
Also, is the external firewire drive self-powered? If not, try that.
Sometimes when using Startup Manager (which is what booting with Option held down invokes), all available bootable volumes aren't picked up before it displays what it has found. The solution for that is to click the circular arrow button in Startup Manager - this is an instruction to rescan the buses.

I recently updated my Mid 2007 iMac with the latest OS 10.8.5 now my external hard drives will not show up. They show up when I boot them up on a machine running and earlier OS. Is there a fix for this?

I recently updated my 20-inch, Mid 2007 iMac with the latest OS 10.8.5 now my external hard drives will not show up. They show up when I boot them up on a machine running and earlier OS. Is there a fix for this?

Can you see them in Disk Utility?
If so, can you select and Mount them?
If not, disconnect them, reset the iMac's SMC and then reconnect them.
Intel-based Macs: Resetting the System Management Controller (SMC)
1. Shut down the computer.
2. Unplug the computer's power cord.
3. Wait fifteen seconds.
4. Attach the computer's power cord.
5. Wait five seconds, then press the power button to turn on the computer.
If you still can not see them, connect them back up to the iMac running the older OS, open Disk Utility and look to see how they are partitioned and formatted.

My WD 2tb external hard drive will not unmount from my MacBook Pro.

My WD 2tb external hard drive will not unmount from my MacBook Pro. It no longer even shows up in finder, however it does show up in Disk Utility. I have tired so many of the suggestions on the internet all to a fail.
I keep getting the message to be sure that all applications are closed before ejecting the drive. I have no clue how to tell which appliactions are using the external drive to shut them off. I turned off Time Machiene to be safe.
I don't need anything on the external drive, I am just trying to erase it, save my current info, and migrate it to my new MacBook Pro.
I have been about four days now with this issue all over the internet, in this community, and watching videos on everything and nothing about this topic to a fail.
I think I am doomed and have lossed this external drive because of some wierd application that will NEVER close on my hard drive for it to disconnect correctly. It's annoying.
Does anyone have a solution?

Have you trie using another USB port? Can you test the USB ports with other USB devices to assure they are working? You may want to reinstall OS X in case there has been a driver glitch.
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Firewire drive will not mount

Firewire drive will not mount USB mounts fine.

It's nearly impossible to offer any help given the dearth of information you provided.
What Mac are you using? What external FireWire hard drive are you trying to use? Is it a FW-400 or FW-800 interface? Have you tried any other FireWire device with that computer? Have you tried that FireWire drive with any other computer?

Firewire drive will not mount on PowerBook

Firewire drive will not mount on PowerBooks
Posted: May 2, 2006 8:09 AM
Reply Email
Hi All,
A friend of mine has a Titanium Powerbook G4 500's with 640mb ram and OS 10.2. She has purchased a Fantom Drive 120gb Firewire drive to back up her work. The drive will not mount on her machine. It will mount on my G5 running 10.3.9. I went to the Fantom Site, and all I could find was a link to Apple's site on Tiger.
She bought a set of Panther disks and wanted to back up all of her stuff before the upgrade.
Any help would be appreciated,
David

Thought you could use this info about getting FireWire to work!
First, you should always Repair Permissions in Disk Utility before and after any update; I would do that now. If you installed your update with FireWire plugged in, your Mac may not recognize it anymore.
Try resetting your FireWire ports by disconnecting all FW devices, shut down your Mac and unplug it from AC power (wall socket) for 30 minutes. plug it back in and try FW.
If that did'nt work, download the combo update from this site (yours may be corrupt), not Software Update, disconnect all firewire + USB devices except keyboard + mouse, Repair Permissions, re-install update, Repair Permissions again + try. Hers should be the 10.2.8 Combo update. Others reading, download the Combo that applies to your system.
If that still did'nt get it Zap the PRAM. While restarting Mac hold down the following key combo Command-Option-P-R. Keep holding those keys down till you hear the second start-up chime, then release.
For those of you with Macs that are not PowerBooks or iBooks, a bad internal battery can cause FireWire to not be recognized, so make sure it's good!
Good Luck!
Cheers!
DALE

More detail and a reply for the CQ50 - 130US will not boot with 8gb ram post

The specs, on the web site say that the max memory supported is 3GB DDR2 because the notebook was built with the OS Vista(32 bit) installed so that’s why the manual has the 3 GB max. memory supported limit. The 32 bit OS can’t address memory over 3.12 GB. To my mind that is not a spec. but rather a tech. writer who made a mistake and copied the sales literature. With Windows 7(64 bit) Pro. installed the OS can address up to192GB of memory if the system supports it. Other Compaq and HP Notebooks can deal with 8GB of memory installed. That’s why I would think HP’s could easily fix this with a patch or use one of their other BIOS’s.
The difference between 4GB and 6GB is that with 6GB system runs faster and the display quality has improved. I have set the cache size to large and the executive paging is set to off in the registry. The menu(System Properties - Performance Options – Advanced – Virtual Memory) is set to automatically manage the paging file size.

You should keep it in the original; thread you started.
http://h30434.www3.hp.com/t5/Notebook-Hardware/CQ50-130US-will-not-boot-with-8gb-ram/m-p/490157

External Hard Drive does not work with Lion

Hi
My External Hard Drive does not work with Lion this message appears:
NTFS-3G could not mount /dev/disk1s1
at /Volumes/My Passport because the following problem occurred:
/Library/Filesystems/fusefs.fs/Support/fusefs.kext failed to load - (libkern/kext) link error; check the system/kernel logs for errors or try kextutil(8).
the MacFUSE file system is not available (71)
can anyone help?

Hi,
See this Discussion:
https://discussions.apple.com/thread/3191198?start=0&tstart=0
Cheers,

My external hard drive will not open and only shows up in Disk Utilities. When I try yo repair it, it give me and error of invalid sibling link. How do I fix my external hard drive?

My external hard drive will not open and only shows up in Disk Utilities. When I try yo repair it, it give me and error of invalid sibling link. How do I fix my external hard drive?

Invalid sibling link may not be fixable by Disk Utility. (Disk Utility is very conservative, and will not attempt repairs that might cause you to lose data.)
It is an indication of serious Directory damage.
that leaves
a) third-party Utilities that will take those risks, or
b) re-initializing the drive (which deletes all your data) and restoring from another backup source.
c) "Copying off whatever files you can salvage" has gone by, and you cannot copy anything off a drive that will not mount. You may be able to use "rescue" programs such as prosoft engineering Data Rescue to copy files to another drive, but that sounds a lot better than its reality. You may get many files, but not get ANY filenames.

MBP15 1.83 GHz Will Not Boot With 3GB Upgrade

I'm trying to increase my MBP's ram to the 3GB limit. This is a 1.83 GHz 15" model.
It will not boot with 2GB & 1GB sticks of identical mfg & specs. It will boot with one or the other...
Any ideas?
Thanks,
Stradioti

Hi
according to the Apple specs for the 1.83GHz mbp's - 2Gig of memory is the limit......
512MB (single SODIMM) of PC2-5300 (667MHz) DDR2 memory on 1.83GHz configuration; and 1GB (single SODIMM) on 2.0GHz configuration; two SODIMM slots support up to 2GB
Crucial Memory says the same.

T43 – Model 1871-FU1: Will not boot with blank screen. Only Fan is running. Any ideas?

T43 – Model 1871-FU1: Will not boot with blank screen. Only Fan is running. Any ideas?
Solved!
Go to Solution.

What lead_org is referring to is commonly known as "re-balling" which involves unsoldering the Southbridge chip from the planar, replacing all (6-700) solder balls with new ones and then re-attaching it under heat/pressure.
This is the place that you need:
http://www.theboardroom.info/index.html
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

External Firewire Drive Will Not Boot with 10.5.1

Similar Messages

Maybe you are looking for