External Firewire RAID problem

My G4533 connects via Firewire to a dual drive external enclosure via Firewire. The two identical drives in the enclosure are configured via OSX's software RAID as mirrored drives. I can connect fine but if I wait a while after connecting the RAID becomes inaccessable. I can be working in Photoshop, for instance, and I will access a file on the RAID and start working on it but when I later go to save the changes, it will just hunt and not find the drives. Or, if I leave the computer alone for a while and then go back and try to access the RAID it won't find it again. This is VERY random. It used to be much worse when "sleep" was involved in any form, computer, monitor, etc. I think I've turned off all the sleep and energy savers. How can I tell? Any ideas?

Anyone????

Similar Messages

External Firewire ODD Problem

Hi~
My Mac mini (PPC) would not recognize external firewire DVD writer.
Trial I.
System profiler information about firewire of Mac mini shows:
Manufacturer - Unknown
Model - Unknown Device
In my other mac, iMac G5, the attached device information is:
Manufacturer - Exxxx
Model - GAxxxxx
Conclusion I: external firewire ODD can be recognized in the other Mac than Mac mini.
Trial II.
I attached other external firewire HDD to Mac mini and iMac G5.
Both recognized the device.
Conclusion II: Firewire bus of Mac mini is functional.
Mac mini information:
CPU: 1.25 PPC G4
RAM: 1GB
Is there any solution for this problem?
Thanks in advance~

yes there is a solution called patch burn
the application is free just go to
www.google.com and search for patchburn what patch burn does is it creates a new driver automaticly for any dvd burner or any cd-rom drive that is mac compatible but isn't detected correctly you can try this first and see what happens if this doesn't work then you may need to find a drive that is compatible

Acomdata External Firewire Drive Problem?

Just purchased a new Acomdata E5 320 GB Firewire external hard drive.
Drive will simply will not mount onto desktop. Checked connections, turned on/off, unplugged cables, etc. Nothing has worked so far.
I ran System Profiler and it states "Unknown Device" on Firewire.
I'm relatively new to Mac OS X, having converted from years of Windows, so I'm looking for suggestions / solutions to get this drive to mount properly.
Thanks....RF
Imac Intel Core 2 Duo Mac OS X (10.4.9) 2GB Ram

Thanks.
Unfortunately, Disk Utility does not see / recognize the drive.
I am awaiting a reply from Acomdata Technical Support, but it does not sound very hopeful.
Bought this from a Compusa store closing, so not certain that I can return it to the store. I will try though.
I will see if I can get it to work with Windows (and then perhaps I can sell it on eBay!!??)
Imac Intel Core 2 Duo Mac OS X (10.4.9) 2GB Ram
Imac Intel Core 2 Duo Mac OS X (10.4.9) 2GB Ram

External Firewire Drive Problems

I have a firewire drive that all of a sudden stopped appearing on my desktop when I booted up each day ... BUT, after about an hour or so if I shut down, turned off the the FW drive, turned the drive back on and re-booted the FW drive appears. Hmmmm? When I would run disk repair on the drive in question the report came back "Drive Ok - No Repairs Necessary". THEN - when I started copying from the FW drive ./ moving files on it after a few days it started to hang up the computer. Next, re-running Disk Repair turned up "Invalid Node." I succesfully rebuilt the FW disk with Disk Warrior last night rebooted and ran disk repair on the FW drive and all was well. Shut everything down and called it a night. Today my computer will not see the FW drive, it doesn't show up in the Finder, Disk Uttility or even in System Profiler where under "firewire" it lists "unknow device."
Ok, any ideas anyone. Thanks much.

I have six 300gig Seagate hard drives chained together that all worked fine with Tiger on my MacBook Pro. All drives have been fully reformatted to Mac format and I do not use any One-Touch software.
As soon as I upgraded to Leopard, I found that I could only mount 2 of these drives at a time. If I attempted to mount a third drive (in ANY order of startup or wiring configuration) either that drive doesn't mount, the System locks up... or both, usually. The only way out is to hold the Power button to kill the computer
I have tried everything. I've repaired every drive with Disk Utility AND with Disk Warrior. I've tried every wiring order, but the results are the same. I restarted with a clone of my former (pre-Leopard) Tiger drive, and all the Seagate drives worked fine, but as soon as I restarted with Leopard, the same problem occurred. I've started up in "Safe" mode - same problem. The computer works fine when not connected to Firewire; and it seems to work fine with only one or two WD drives connected; but the minute I connect too many drives (any drive, any order of wiring, different Firewire cables, etc) everything freezes again.
After all the usual troubleshooting with Apple, the only thing they had left to suggest was an Archive and Install of Leopard which I've done, but the problem still persists.
An Apple product specialist is investigating this problem in depth; but since all my drives are Seagate, I'm wondering if anyone has gotten any feedback about specific Seagate problems with Leopard.
THE PROBLEM ALSO OCCURS WHEN RUNNING DISK UTILITY FROM THE LEOPARD INSTALL DISK - ONLY 3 OF THE SIX DRIVES WILL MOUNT AT ANY ONE TIME, The order of connection makes no difference. This seems to be a Leopard problem, but I'm wondering if it's also specific to just Seagate drives.
Anyone got any ideas?

External Firewire Import Problem

Hello all,
I got a new Ext. FW HD for use with iMovie 3.03 and ripping DVDs, but it won't work. It works fine for other read/write activities. And I have another FW HD that works fine.
The one that works is an 80gb 7200rpm IBM Deskstar with an Oxford chipset. The one that doesn't work is an 320gb 7200rpm Seagate Barracuda with an Initio chipset.
They are both formatted as Mac OS Extended (journaled). And I have tried all possible daisy chain set ups including plugging it directly into the computer and hanging the camera (Sony TRV 22e) off the drive.
Does anyone else have experience with the Initio chipset? Could it be the problem?...or......???
Any suggestions would be appreciated!
TIA,
Tri
TiBook 800 Mac OS X (10.4.7)

Hi Trisolo
Only good advice I can give is: Do not Daisy chain Camera - ext hd - Mac.
It's asking for troubleds - might work some time but often not so.
If You have several FW - preferaby on separat FW-cards You might try to
connect Camera to one of them and the ext FW drive to another.
This should have a possibility to work.
BEST alt. If You can/have such a Mac that You can mount one extra drive internally - this works fine.
alt. 2 : Free up space on Your internal drive and do Your Capture to this. Then
Copy off Your material to an ext hd for editing. This also works if nothing
else is connected to that FW port.
Yours Bengt W

Recording to external hard drives - Firewire 800 problems

Ok so i did post a similar thread on this in the "mac mini" part of the website so im very sorry for double posting but I thought since this problems pertains mostly to recording and specifically recording on garageband, that I would try posting here as well. Heres my deal:
I am a musician working with garageband and I have always been recording to my internal drive until recently. I was unaware until I read some posts here from the good people like you guys, that that is not a good idea to record to your internal drive. So, I got an external firewire 800 drive (http://www.amazon.com/gp/product/B001DGZ05A) and this cable (http://www.amazon.com/2M-Firewire-800-9PIN-Cable/dp/B000XQILWK/ref=pdbxgy_e_imgb). When I received it, I first used disk utility and reformatted it for Mac OS Extended Journaled. Then I proceeded to move a couple sample libraries and my entire "Garageband" folder (with my saved songs in it) to the external. I instantly knew something was wrong. The files were taking forever to get written over. It took about 15 mins for a 5GB folder to be moved over. I was already discouraged. Anyway, I plugged in the USB cable that came with the external (the drive has hook ups for both USB 2 and firewire 400/800) and tried moving the same files and it was MUCH faster. The same 5GB file was moved over in a matter of minutes.
I then tried recording to the drive (using firewire again) and it would hardly even PLAY the song without stopping every couple seconds (too many effects error, and yes ALL the tracks were locked). Tried to record as well and i'd get even less time before garageband would stop the song with the same error. So I disconnected firewire and went USB. Thru USB the song didnt stop once, not on playback OR recording. Then I moved the songs back to my internal and played them (and recorded) with no problem either.
I ran a couple tests on the drive using AJA system test and came back with these results:
Basic test of read/write speed using firewire 800:
write - 14/mb sec
read - 21/mb sec
then, using usb 2.0
write - 18/mb sec
read - 37/mb sec
both these connections seemed to be running slower then they should ..but at least the USB connection would actually let me play a song and record to it without stopping
I manually copied over a 2.04GB file and via firewire 800 connection it took 2 mins and 20 secs. Via the USB 2 connection it was 55 seconds! ..also, while i transfered the files i noticed that the USB transfer was nice and steady with tiny increments of the file being transferred. Firewire, however, was speedy then slow, speedy then slow. Very inconsistant transfer speed throughout the process. kind of choppy
So what gives? I cant figure out if I'm doing something wrong, or if my external HD is bad? Or the cable is bad? Or maybe the firewire port on my mac mini is bad (i've never used it before for anything other than this external drive). Or i'm thinking maybe my processor isnt strong/fast enough to record to the external firewire drive? Im working with a mac mini 120GB internal HD and the 2ghz intel core 2 duo with only 2GB ram (i know thats not ideal for recording and im planning to upgrade at some point, but i have been recording to the internal just fine with the RAM i have now and never had a problem until trying to record to the firewire drive). I was going to go out today and get a new cable and see if that was the cause of it. Anyway sorry for the book-length post! But PLEASE SOMEBODY help me here! ..as i said, im not very computer literate and only just started producing music using computers so please use dummy terms lol ..thanks in advance

Strictly my opinion, and more than happy to be educated with facts and convinced otherwise... but, there are no dangers.
Bottom line is this... does your specific computer setup encounter ANY problems during recording or editing with your chosen software and current workflow? If not, then there is nothing wrong. Simple as that. Further, if you are having problems, then its more than likely dealt with by upgrading RAM amount and internal HDD speed and size. If you have a slightly older machine that is pre FW800, you will find by bench marking your HDD's that an upgraded internal system HDD will significantly outperform any external HDD read/write spec's. Even with FW800, comparing apples with apples, your system HDD will more than likely have better spec's. Please however, do not take my word for this, but try it out for yourself. Make sure you have facts about your own system rather than believing my claims or anyone else's claims. I used Intech's Quickbench http://www.speedtools.com/QuickBench.html to get some facts about my machine.
There will be an argument made that you will be putting strain on your hard drive by recording to the system drive because it not only has to deal with this function but also with other functions related to your audio programs and OS. Apparently you may be working it on the 'hard' side and shorten its life span. Probably technically correct but practically speaking you will more than likely never even notice any such strain. If you are worried about a system HDD crash or death because you are working it too hard then the answer to this is a well planned back up regime. You should have one anyway, regardless of setup.

10.4.7 update and external firewire problems with HD corrupion

Dear all,
Advised by Jpfresno I started this new topic about Tiger 10.4.7 update.
I will repeat my post and what was happening 2 weeks ago:
“In 5 years 10.4.7 update was a tragedy for my Powerbook Ti 667. When I update from 10.4.6 to 10.4.7 my 300 GB firewire drive gets corrupted, after repairing it with DiskWarrior and after connecting it to my PowerBook my computer freezes and I must shut it down via powerbutton. Safari also crashes after the update.
I just erase my Hard Drive and after that install 10.4 and update with combo to 10.4.7. But I had the same problems: finder freezes with connected firewire devices and also safari when browsing. I spend a week trying to solve the problem but no luck.
Yesterday and with no firewire devices, 10.4.7 freeze and I have big trouble in order to started my powerbook!!! Even when i insert the 10.4 install DVD it did not detected my HD. Finally I get it to work and install 10.4 and combo update to 10.4.6 and everything works. My external firewire drive and safari. I already diagnose my HD with disk utility, TechTool and directories with Diskwarrior and everything is ok.
I clone my 10.4.6 to firewire, boot from it and everything is working. I let my external drive connected and finder does not freeze.
My conclusion is that the problem is 10.4.7 update. It only give me problems and I was getting crazy with it. 10.4.6 is working good and I do not advice anyone to update to 10.4.7.”
Last week after reinstalling 10.4.6 I started to have HD problems with my Powerbook 667. I did a surface scan with TechTool I it reported bad sector. Then I done a zero disk format but after a second surface scan TechTool also reported bad sector. Then I take the decision to replace my internal HD. I bought a Samsung 40GB Hard Drive and installed it on my PowerBook. Then I have done a clean installation of 10.4.6 with all applications that I need and clone it to my hard drive with Intego Personal Backup software. Everything works on 10.4.6. and external firewire drive.
After that everything is ok. But I decided to test if my problem derivates from 10.4.7 update or from previous HD corruption. Then I install 10.4.7 update on my Internal Hard Drive. Everything is working good but after connecting my external Hard Drive the finder started to freeze!!!!!!!!!. After that I tried cloning HD to external firewire with Intego personal Backup. Everything was working good but when it was finishing the backup process started to give errors!! I started panic. I interrupted the backup process but after and after restart I found something strange with 10.4.7. The system started up, I login but I could not started any application!!!??? All my application died!
Then I have done one more clean installation of tiger and 10.4.6 update.
My conclusions are that the 10.4.7 update causes all the problems that I have on my PowerBook, because I used the same methods and same software/hardware on 10.4.6 and did no have any problem.
This last two weeks were very difficult to me. I tough that these problems do not happen with Apple computers but I was wrong!!! It is very hard to me to deal with it. I always said to my friends that I never had problems with Apple computers. I accept that a hard drive died because the use of it but I can not accept that a system update cause me 2 weeks of hard problems and make me loose precious work information! I always love apple computers and Apple OS but now I am disappointed
If anyone can explain what happen or have a solution for those problems?
Thanks for the comprehension and collaboration.
Best Regards
Mac OS X (10.4.6)

Hi, alsvieira.
There are some things you did not check in all of your troubleshooting:
1. Run the Apple Hardware Test (AHT) that came the affected computer. See my "Apple Hardware Test" FAQ for comprehensive advice on using the AHT in troubleshooting.
2. re: FireWire troubleshooting: Here is some general troubleshooting advice that may help if problems return with your FireWire drive:1. Review the AppleCare Knowledge Base document "What to do if your computer won't recognize a FireWire device".
2. If this problem occurred after installing a recent Mac OS X Update, and you are also unable to mount CDs, DVDs, or disk images perform the steps in this Mac OS X Hints article. This worked under Panther and may also work in certain situations under Tiger.
3. Power-on the FireWire drive before starting up (booting) your Mac.
4. Reset PRAM and NVRAM.
5. Resett the power-management chip in your Mac.
6. Try a different FireWire port. James Wiebe, CEO of WiebeTech, has published FireWire Port Failures in Host Computers and Peripheral Devices, a white paper providing backgroud information and technical analysis concerning the causes of failure for FireWire ports. This may provide additional diagnostic information.
7. Micromat TechTool Pro version 4 can test the FireWire bus in your computer: this tests the bus — not the ports — but if the problem is on the FireWire bus on the logic board, it should reveal it.
8. Check with the manufacturer of your FireWire drive or enclosure to see if any firware updates are available for such.
9. Hopefully, the partition map on the FireWire drive is not damaged. This can happen if the FireWire drive was not Ejected before being disconnected or powered off. If it still refuses to mount, you may need to employ data recovery tools or services: see my "Data Recovery" FAQ.Note that some of the information above is from the "FireWire Problems" chapter of my book, Troubleshooting Mac® OS X.
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Help!! External Firewire Problems

Hi All,
Please, please help me.
Ever since the purchase of my iMac G5, i have had major problems with the External Firewire. The first problems were similar to the current problems but i replaced both the hard drive and the enclosure. It would work, mount okay, then the next time not mount, on the occasions it did mount the finder froze up and i had to initialise a manual shutdown!
I formatted the new hard drive through disk utility on the Intel Mac on a level that would work on all mac,! allegedly!! I also have a 17" G4 iMac running 10.3.9, and as i still currently use both machines with the external drive and use it as a back-up, i did'nt want to limit it to the Intel system, just yet.
I currently have a 250Gb Samsung HDD 300 Ultra (2 partitions) encased in my new Icy Box Enclosure. But the problems persist, i have had a desperate drop out today, the Pram was reset, and it wants to intialize the drive as soon as it starts, i choose ignore and tried to repair through disk utility and recieve this message:
Verifying volume “disk1s10”
Checking HFS Plus volume.
Invalid B-tree node size
The volume needs to be repaired.
Error: The underlying task reported failure on exit
Verifying volume “disk1s12”
Checking HFS Plus volume.
Catalog file entry not found for extent
The volume needs to be repaired.
Error: The underlying task reported failure on exit
2 HFS volumes checked
2 volumes need repair
Can i resuce the data on these disks???, and is there a solution for the Intel Mounting issues, and stop the finder crashing!, I have also updated my firmware to the latest release.
Many thanks Martin

Hi Martin,
One thing I'm a bit confused about. You seem to call this an "Intel" iMac some of the time and a "G5 iMac" at other times. These are two quite different machines, need different OS software and so forth. I'm wondering whether you may have installed something that has caused it indigestion accordingly!
By way of example, the very latest release of TechToolPro (which I gather you have ordered) will work with both iMac G5 and iMac Intel computers, but earlier ones are G5 compatible only. DiskWarrior, also suggested in the thread, remains iMac PPC G5 only, and won't work on any Intel iMac.
One additional question. Have you had any other firewire devices attached apart from the problematic external when the problems have arisen? Problems with hubs, external burners or other drives, external iSights and the like, can sometimes be implicated in these sorts of issues, interupting data flow to the drive and resulting in corruption etc..
Cheers
Rod

I just added two external firewire drives and they keep going to sleep. I did not have this problem when USB. I have turned off "put disks to sleep" in power preference.

I just added two external firewire drives and they keep going to sleep. I did not have this problem when using USB external drives. I have turned off "put disks to sleep" in power preference.

It is not clear if these are the same drives, just connected
differently, or different drives?
One thing that may be happening is that the drives firmware
itself is putting it to sleep when inactive. Many drives on
the market have ths feature and it is turned on by default
and require a drive utility from the manufacturer to disable it.

Problems Installing via an External Firewire DVD drive

Hi,
I'm trying to install Leopard from an external LaCie D2 (with LightScribe) DVD/DL drive via a Firewire cable.
I start the iMac (G5 20" SuperDrive is dead) via the "option" key, a screen with a choice between HD and Leopard Install DVD appears.
When I select the second option (install Leopard) I have the Apple Start Up screen (the grey screen with the dark grey Apple) but the spinning flower is missing. And the screen stays that way for minutes... Is it normal? Do I have to wait more? Is my iMac cursed?

Here's the problem:
1- the problem occurs when I boot, so the OS is "innocent"
2- when I load the start up menu (with the option key held down) I see both of the drives (HD and External Firewire DVD drive), so it can't be a "power" problem... (http://youtube.com/watch?v=MQs2n1vxpkw)
3- when I insert a DVD (movie for example), the drive reads it when connected via USB 2.0 and doesn't via Firewire, so the drive is unable to read (or reads slowly)? a Driver problem?
4- when I shutdown the iMac with the external drive connected via the USB port, the drive shuts down too, while it doesn't when it's connected via the FW one...

'Resource Busy' problem when installing OSX 10.5.4 from external firewire

Hi,
I'm giving my old powerbook to a friend and would like to wipe it and reinstall 10.5 on the system. The catch is that the internal DVD player is fried.
I have an external firewire dvd player than I use to install.
The installer boots up properly, but when I go into disk utility to erase or repartion the drive, I receive a "resource busy" error.
The hard drive shows up in the left window, but the hard drive volume does not. I do not have the ability to mount or unmount the volume for that drive.
How can I gain access to the drive to repartition (or erase) the volume, so I can do a clean install?
Please advise,
and thanks.
-S

Never had that issue. If you can boot from the ext DVD player, then you should be able to mount/unmount the int HD's volume. You might try on another computer or use another computer, hooking up the PB in target disk mode.

Mac Pro small business server; RAID problems

Our company runs on a small network consisting of 8 workstations (iMac's) and 1 dedicated server: a 1,5 year old Mac Pro running OS X Snow Leopard Server. This machine has 2 hard drives of 1TB each, running in a mirrored RAID configuration. This configuration holds the OS X system and the data. Because the hardware RAID was so expensive, I chose the software RAID controller OS X offers instead.
All this ran fine for the first 1,5 years, until yesterday... I ran an OS X update and the Mac Pro needed to restart after that. After the machine rebooted, I got a gray screen with the blinking folder-with-questionmark icon telling me no bootable drive could be found. I tried booting from the install DVD and that worked, but after I started DiskUtility to check the hard drive for errors the computer did not find any hard drives, only the DVD. Luckily I made a backup (clone) to an external Firewire drive just before the update and at this moment the server is running from this backup, so no harm done.
How can I solve this problem? Why can't my Mac Pro find it's drives? Is it possible to circumvent the RAID software and boot from one of the two disks or are they formatted in a special way?
My second question is on how to prevent this in the future. I still think the Mac Pro RAID controller is way too expensive, but I read that it's not that smart to use (software) RAID as a bootable drive (of a server). Because of this, I am looking at external options, like the SmartStor NSx600 Series through Firewire. Could this be a better way to go then the software RAID OS X offers or does this external solution have other disadvantages? (speed? reliability?)
Thanks in advance for your input!
Mario van Ginneken

Who is your ISP...?
What is the ip address of the modem..?
What is the ip address of the router..?
Where is the switch and server connected...?
What is the ip address of the server...?
How you are able to see the Wireless network if you have disabled the SSID broadcast on the router..?Re-check the settings on the router.

External FireWire Disk will not boot

Hi Forum,
after some installations (OS 10.4.9, latest security update and Qucktime 7.1.6 I canot boot from my external disk (Lacie) connected to FireWire 800 port. The Apple shows up but then nothing more happens. Does anyone have a hint?
Thanks
Oliver

Add me to the list also. I had an external firewire disk as a RAID mirror for my boot disk. After a system crash (and some problem with my internal disk) I couldn't boot from the firewire stripe. This used to work.
I've tried creating a single-disk "degraded RAID pair" on the external disk and cloning the internal disk to it (using Disk Utility "Restore"). The cloning works fine but I can't boot from the copy. This is how I originally set up the RAID pair (clone, boot from clone, add internal disk to RAID group). This used to work. I bought a new firewire disk and it has exactly the same problems.
My original firewire disk was an Acomdata E5. My new firewire disk is a Coolmax Gemini CD-311 enclosure with a Hitachi 250GB deskstar inside.
iMac G5 Mac OS X (10.4.9)

External Firewire Drives for FCP?

Will any external Firewire hard drive work for FCP that is 7200 rpm? If not, what kinds are recommended?
This is not for capture; just for editing .MOV files.

I have one of the G-RAID 500MB units and it's worked well - handles 10bit
uncompressed with no problems. I did get tired of the LaCie 1TB array
overheating and dying - sent it in for repair once but when it started going sour
again I went off to http://www.cooldrives.com/copr0fi80ald.html and bought
two of them, moved the 4 drives from the LaCie over and life's been good ever
since. Those enclosures are very similar to the G-Tech enclosures.
http://www.cooldrives.com/copr0fi80ald.html - Oxford 912 bridge board (same
as the LaCie and I believe the G-RAID). Get 50+MB/s - 10bit uncompressed work well. For grins&giggles I put one enclosure on each of the two 1394b cards I have in the G5 and raid-0'd them together - got up around 108MB/s
via firewire. Not bad at all

RAID problem : build disk OK, failed to copy files to it

Hello,
I am running OS 10.4.5 server on a G4/400. I have 2 external firewire drives both connected directly to the Mac.
Using Disk Utility to set up a Striped RAID volume. Everything went OK. No errors. The new volume is 73GB in size.
Problem arises when I try to copy files to it. Tried to copy a folder containing 30GB of files to it, but it failed immediately after computing the time to take to copy. Every time.
Finder would complain that I didn't remove the RAID disk properly. Of course the disk was not ejected, nor physically unplugged.
Upon checking with Disk Utility, 1 of the hard drive would appear to be offline. Tried mounting it and it would fail. It can't be repaired too due to busy resource.
Rebuild the volume, copy again, and boom, same error again.
Very strange stuff.
Anyone come across this problem? Any solutions?
Thanks!!!

Here is the event log for CCC
Carbon Copy Cloner, v. 2.3
Log started Thursday, February 8, 2007 1:50:06 AM
Startup Disk: System
Available target disks:
/Volumes/System 9.2, /Volumes/40gig, /Volumes/Panther, /Volumes/Video, /Volumes/Audio, /Volumes/System Apps, /Volumes/DVD - ready, /Volumes/Downloads, /Volumes/Unsorted, /Volumes/20 GB, /Volumes/Video - DVD
Contents of source disk: System
Unix command: ls -AF /
.DS_Store*, .Spotlight-V100/, .TemporaryItems/, .Trashes/, .VolumeIcon.icns, ._ T _ E _ M _ P _ T _ T _ M _ M, .comsymantec_symfsprivate/, .hidden, .hotfiles.btree, .vol/, Azureus_Stats.xml, Desktop DB, Desktop DF, Desktop Folder/, Extensions/, Library/, Myst 5 v.1.0 NoDVD Crack, NAVMac800QSFile, Network/, Scripting Additions/, System/, TheVolumeSettingsFolder/, Trash/, Users/, Volumes/, automount/, bin/, cores/, dev/, easyy, etc@, lost+found/, mach@, mach.sym, mach_kernel, nolfcmds.txt, private/, sbin/, tmp@, usr/, var@
Items to be copied:
.DS_Store*, .Spotlight-V100/, .TemporaryItems/, .VolumeIcon.icns, ._ T _ E _ M _ P _ T _ T _ M _ M, .comsymantec_symfsprivate/, .hidden, .hotfiles.btree, Azureus_Stats.xml, Desktop DB, Desktop DF, Desktop Folder/, Extensions/, Library/, Myst 5 v.1.0 NoDVD Crack, NAVMac800QSFile, Scripting Additions/, System/, Users/, bin/, easyy, lost+found/, mach_kernel, nolfcmds.txt, private/, sbin/, usr/
Authentication error:
Security API failed with error -60008.
Number: 1
Authentication error:
Security API failed with error -60008.
Number: 1
Authentication error:
Security API failed with error -60008.
Number: 1
Authentication error:
Security API failed with error -60008.
Number: 1
Authentication error:
Security API failed with error -60008.
Number: 1
Quicksilver 2002 G4 desktop duel 1gig Mac OS X (10.4.7) yes
Quicksilver 2002 G4 desktop duel 1gig Mac OS X (10.4.7) yes

External Firewire RAID problem

Similar Messages

Maybe you are looking for