External FW drive drops out and THEN!

I use TechToolPro vs.4.1.1 from my eDrive once a week to check my film-video editing system, this system is centred around a 2Ghz DP G5 with 2.5 Gigs SDRAMM with two internal 160Gig serial ata drives and 4 ext FW drives (all LaCie, 3 FW 400, one FW 800) plus one Clearlight USB 2 drive. TTPro has had no trouble dealing with this set-up for nearly two years now. My OS is 10.3.9
I have had one hardware mis-hap with an internal drive failing in the first 18 months, otherwise, fine.
Yesterday one of the external FW drives, a 160Gigs drive that I use solely for video render files, dropped out, I heard the click and the Mac asked why I had done this terrible thing. I looked under the desktop and could see the powerlight OUT on the LaCie drive in question. Disc Utility didn't see it and it was no longer on the desktop (obviously). I replugged the the power cable and the drive came straight back on (I should have pressed the power button but I was very distracted as I was at that moment doing something complex in Photoshop - FCP, AfterEffects or Motion were not open at that time).
When I opened Disc Utility it saw the drive, tested it and found it fine BUT it had a custom icon(?). Then I opened TTPro and found that suddenly ALL my external drives were "Unsupported Hardware" and that TTPro could therefore not test the SMART or any other drive diagnostic. It could only do volume and file work, When I click on the information buttons for these drives in TTPro the draw opens BLANK. What could have happened to them all?
DiskWarrior sees all the drives and says they are all fine but of course that is not external hardware, it only ever sees the internal drives and says they are fine. But TTPro used to see them and clicking on the Info buttons would give lots of info. Anyone experience anything like this

I discovered that this was a passing issue with the drive going to sleep if not accessed with-in a certain time.
It has stopped doing it now.

Similar Messages

External hard drive keeps disconnecting and then reconnecting

External hard drive on Time Machine, running via USB keeps disconnecting. Get the pop us that the drive wasn't disconnected properly. This Mac is brand new as is the hard drive. It is a Seagate 1T Free Agent.
After a minute or two it reconnects. I've run Seagate diagnostics and it says the drive is fine.
Any suggestions?

See #A1 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum), for a handy widget that will display the backup messages from your logs.
See what that shows; there may be a problem with the backup, which results in TM ejecting the drive. If so, the disconnect may be a symptom, not a cause. If so, see #C2 there. If not, or if you're not sure, copy and post them here.
Also, to rule out other USB problems, disconnect everything but keyboard and mouse; connect the drive directly to your Mac (no hub).
Make sure all connections are snug and secure.
Try other ports, cables, and combinations of the two (a plug that works fine in one port may not make good contact in another one, and throw intermittent errors).

Easy question I'm sure. imac hard full (500gb) mostly from iphoto. no capacity left. what are my options? I've thought of an external drive of 1tb and then a 2nd external drive of 3tb to back up both???? please help.

easy question I'm sure. imac hard full (500gb) mostly from iphoto. no capacity left. what are my options? I've thought of an external drive of 1tb and then a 2nd external drive of 3tb to back up both???? please help.

Those are the options - more space is more space.
Moving the iPhoto Library is simple:
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD

Hi, my iPad 2 keeps dropping out and going back to blank screen, I then have to enter my password again, start downloading or reading and it happens again. I have reset the iPad but it is still the same.

Hi, my iPad 2 keeps dropping out and going back to a blank screen. I have to again enter my password and go back to what I was doing and then it happens again, I have tried resetting and nothing has changed.
Thanks
Ron

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without be charged again. Also, if you have IOS-7, read this.

Broadband Dropping Out and Connection Speed Decrea...

Sorry to be a pain but I am back here again.
Since the last issue with speed, connection drop out and noisey line which required an underground cable to be partly replaced, all has been fantastic and no problem to report. Many thanks to those who were involved in helping with getting that issue resolved.
About 10 days ago the broadband started to drop out at random times but not too often. The broadband hub light would go out for about 15 seconds before returning. My connection would automatically resume and no great problem. It has since become more of a problem and pain.
The frequency of drop out increased with a sort of pattern. Last week an example would be drop out at 11:50 am, again at 12:40 and once more at 1:30 pm. Each time the connection returned my computer icon for wifi would be a warning triangle. I clicked on the icon and would get a message 'limited connection'. The only way I could connect again would be to click the icon and select to disconnect and then connect, making sure a 'tick' was in the box for autoconnection. A bit more of a pain than before but usable. It got more of a problem over the next few days.
The frequency of drop out increased. This became a right pain when trying to purchase things online as I could not be sure in the purchase had been completed or if I tried again would I get two lots? Upon broadband connection returning I would not be able to 'auto connect' but would get the warning triangle of 'limited connection'. I tried the click to disconnect and reconnect but it failed to work. I ended up shutting down the laptop, waiting before powering up. This failed to work as all I would get is the warning triangle and 'limited connection'. The only way I could reconnect was to press the 'restart' button. This worked but it got worse.
The next day the broadband connection would drop out every couple of hours. It got to the point that even pressing the 'restart' button would not allow me to connect. I tried three times and gave up. I had to resort to pressing the very small 'reset' button on the back. This cured the problem for about 12 hours before the drop outs started again.
It is now a case of 50/50 if I can connect to the broadband again after a drop out. It is getting quite frustrating. I only used the small 'reset' as a last resort. I have noticed that the speed of the connection has started to drop down also.
Each time the hub drops broadband and I can auto connect and do not press any hub button, the timer has reset to zero days and zero hours. I know it takes about a week for the connection to settle. I do wonder if these drop outs are messing the connection settings for my line speed? The line used to be rated at 21 Mbps but has decreased to 17 Mbps, my actual connection used to be 19 Mbps but struggles to reach 14 Mbps. It is slowly dropping with each and every drop out.
I also looked at the event log in the hub. Just before each broadband drop out I see a external connection is made with the initials 'CWMP' followed by 'event code 1 boot' or 'event code 6 connection request' or 'event code 4 value change'. Straight after the broadband connection drops out with out fail.
All I can seem to find out is that the external connection is either the hub connecting to the server or vice versa? As for the codes? I have no idea at all.
I only ever resort to pressing 'restart' if I cannot connect to my hub. I have only pressed the 'reset' as a last resort as nothing else worked to allow me to reconnect.
Can anyone offer any help or best a permanent fix?

I connected to the test socket and used a wired connection for the speed test and hub stats.
The hub position and run of cables are the same as when the last engineer advised as the best set up.
Since my last post I have checked the event log and 'CWMP' has made at least two remote connections but the hub did not drop broadband connection. The broadband has been stable but just slower than usual, as you stated due to the drop outs/disconnections.
I guess a case of wait and monitor to see if the problem has resolved itself?
Will the speed automatically return to the usual 18 to 19 Mbps? or will something else have to be done to reset it at the exchange/server?
Here are the hub stats from this morning.
Connection Information
Line state:
Connectedppp0_0
Connection time:
2 days, 00:23:43
Downstream:
16.69 Mbps
Upstream:
1.024 Mbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
9.5 dB / 7.1 dB
Line attenuation (Down/Up):
10.3 dB / 6.7 dB
Output power (Down/Up):
19.8 dBm / 12.4 dBm
FEC Events (Down/Up):
4947 / 0
CRC Events (Down/Up):
11 / 11
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
377 / 48
Error Seconds (Local/Remote):
72 / 21

Help me!:audio keeps dropping out and coming back in while importing clips

While importing from my camera (brand new Canon Xl-2) to imovie, the audio from the tape keeps dropping out and coming back in for some reason.This happens with all my tapes. I've tried using a head cleaner and that didn't help. I'm using a Maxtor external hard drive to save the project on. The project itself is kind of big (about 80 GB) Can imovie support projects that large? Could this be a problem with my processor?
I'm just frustrated beyond belief right now. Any help you can give would be greatly appreciated. Thanks!
these our my specs: Processor: 800 mhz. Memory: 1GB SDRam. The disk space icon at the bottom of imovie says i have 151 GB of disk space left.
powermac g4 Mac OS X (10.4.5)

Hi e
With a slow computer one has to minimize the hassle.
I would
- repair permissions
- cheque that nothing else is taking resourses from the job (energy saver,
screensaver, File Vault etc.)
- I would move material to my ext hd so that I got > 80Gb free (for a 80Gb
project)
- nothing else connected than my Mac + Camera and import.
Yours Bengt W

I use only two channels, have plenty of memory in my hard disk, and external hard drive, no effects, and still having problems with Garage band. Giving messages as you have too many live channels

I'm frustrated, I am doing everything you recommend, I use only two channels, have plenty of memory in my hard disk, and external hard drive, no effects, and still having problems with Garage band. Giving messages as you ave too many live channels, the disk is slow prepare...can you help?

Quote from: Richard on 15-November-07, 20:33:05
tornado2003,
What you need to do is boot into Safe Mode. Then delete the VGA Drivers.
After that boot normally and install the latest nVidia ForceWare Drivers
Take Care,
Richard
i guess you missed that:
Quote from: tornado2003 on 15-November-07, 17:26:52
ive tryed booting xp in safe mode but it just freezes after it loads up a couple of needed files .
ive even formatted my hard drive and tryed installing a fresh xp on it but it just keeps locking up when it gets to the "starting windows setup" .(this is just after it loads all the drivers from the xp cd)

Can I use an external hard drive to download and store my iTunes library?

Can I use an external hard drive to download and store my iTunes library?

Yes - in most cases you can just copy your entire library (by default C:\Users\username\Music\iTunes) to your external drive, with the result being a iTunes folder in the root of that drive with a structure like this:
Then hold down SHIFT when you start iTunes, and when you see this prompt:
click on Choose Library..., navigate to the iTunes folder on your external drive, and click Open. See turingtest2's user tip on Make a split library portable for more information, including steps you may need to take to align your library structure before moving it to an external drive - this applies if you currently have some/all of the media in your library stored outside the standard iTunes Media folders.

CS3 exporting drop outs and red screen flashes when exporting via Media Encoder

Hi forum
I have been using Premiere Pro CS3 for a long time on my dual core PC with no issues. Suddenly, I am now getting a major issue i MUST get sorted asap for a client is waiting for the final video.
It is a HDV (1080i, 25fps) project/timeline. An 8 minute video has been put together in this and every time I try to export as either MPEG2 (Blu Ray) or WMV, I am getting pixelation in certain places usually around certain cuts, or horrible red blocky pixels filling up the screen for a second or two. They seem to come always at the same point. They don't happen when i render the timeline or show up when playing the edit itself in the timeline - just when i playback the exported video in premiere or in Windows Media Player.
To try a workaround I exported the whole video as high quality MPEG2 (blu ray - 30mbps), which I brought into a new sequence, then I exported small sections where this problem was happening as Uncompressed Microsoft AVI and called them "patch 1", "patch 2" etc. and brought them back in and overlayed over where the problems were occuring. The short Uncompressed AVI patches seem to have exported with no glitches, so theoretically I thought I had a clean good timeline in my new sequence made up of the MPEG 2 video overlayed in the dodgy places with uncompressed AVI "patches". However, trying to export a new MPEG 2 master from this has created the same problems, in the same places!!! Still drop outs and still those horrid red flashes filling the screen. Not always as bad, and some places where there were problems are ok, but I am still left with most of the problems still there.
I am now trying to export the whole video as an AVI uncompessed but dont know if this will work and will take a very long time.
I do have Saphire plugins, but they are not being used in this new sequence so therefore could that be a possible problem? I thought perhaps it was the brightness/contrast filter etc so removed that from some of the problem areas, and it helped on some of them, but not on others, so not sure its anything to do with my plug in or filters.
Any help would be greatly appreciated.
thanks, James

This topic is about a year old, but I thought I would reply because I just experienced this problem very recently and stumbled upon an easy solution.
Problem: When using Adobe Media Encoder to create an HD or .m2v video file, a bright red screen will flash followed by a mashup of red blocks/pixels somewhere within the file you've just encoded. This phenomenon lasts for exactly 10 frames before clearing up. Most likely, you won't see this problem until you import the encoded file into Adobe Encore. It shows up on the timeline, the preview monitor and the DVD itself. It occurs on edits that the system reads as being corrupt or when a flash bulb goes off from a still camera. Both instances make the encoding process go haywire.
Solution: Encode your HD or .m2v file with CBR (1-pass) bitrate encoding rather than VBR (2-pass). Don't worry about losing any quality in your video or creating unnecessarily large file sizes with your new renders. I guarantee you won't see much of a difference, if any. I can't explain why this solution works. It just does.
Hope this helps you as much as it did me.

My Macbook "blacks out" and then turns back on?

There are times when my MacBook will "turn off" or "black out" and then after a few seconds, it would just turn on again with all the applications I was opening opened up already. Please help? This has happened 3 times now. :/

Looks like you have a 2010 Macbook. Are you running 10..6 Snow Leopard? Things to check. Go to system preferences/energy saver/ schedule and make sure nothing is checked. Also uncheck put hard drive to sleep. Do a pram reset/Command/Option?P/R and hold power button down for three chimes. You could also reset SMC. Hold down the Command?Option?Shift while holding down the power button for about 10 second. You should be able to access the apple hardware test by starting up and holding down the D or Option D on startup. Run the test. If not and you have the install disks you can run it from there by inserting it and doing the same thing. Use disk utilities in the utilities folder to repair disk permissions and verify your hard drive. If it needs repair ,you'll need to use the install disk to do it under utilities at the top of the screen. If you have a newer operating system ,Then the only way to do this is through the restore partition by starting up and holding down the option or option r.You could look in your library system fold logs and see if you see anything under crach report that says thermal. Let me know.

USB Drives Randomly Disconnect and then Reconnect

On my laptop I have a USB drive where I keep all of my data. It is always plugged in while the laptop is in use. However a number of times the USB drive disconnects itself and then immediately reconnects. I get the notification that my Y drive has been connected. This causes problems for my synchronization application that constantly monitors changes on my C drive. I have changed all of the Power options that prevent the drive from powering down when not in use but the problem still happens. This problem happens on all of my USB ports. The external drive is a Western Digital My Passport 2 TB drive. This problem is getting to be a real nuisance. I have only had the laptop for 5 months. In searching the internet there seems to be a lot of people that have been having this problem but I couldn't find a suitable solution. I never had this problem with any previous laptops that used this external drive. The laptop is running Windows 8.1 with 12 GB RAM and a 1 TB hard drive. This is the operating system that was installed on the laptop when I purchased it. Has anyone found a fix for this type of problem? Thanks,Joyce

This is a known bug and Microsoft are working on a fix. They plan to fix this before Firefox 4 reaches release candidate phase.
A workaround is to change a preference in Firefox:
# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# Locate the preference '''html5.enable''' and double-click on it to change its value to '''false'''
If you do this, remember to set the preference back to true by double-clicking on it again when Firefox 4 release candidate is made available, the bug should be fixed by then.

Face time fades out and then tries to reconnect on new ipad retina display on WiFi. Iphone 4s has no problem with face time from exact same location and same contact. WiFi signal strong on both devices. What gives?

Face time fades out and then retries to connect (new Ipad Retina Display) on WiFi. Iphone 4s has no problem with face time from same location and same contact. What gives?

rdallas001 wrote:
Is the router to small?
Not necessarily, if you are using Facetime all the data goes through your WiFi router, your cable/DSL modem, your ISP and the internet to Apple's Facetime servers and then, in reverse, down to the Facetime recipient. If your ISP connection is too slow or there is excessive traffic on the internet you can have Facetime problems.
Most WiFi routers can handle this unless others in the house are also using WiFi at the same time. The problem may be your ISP connection or congestion on the internet, etc.

Just finished using iTunes, closed out and then tried to get back in. Got this message "he iTunes library .itl file is locked, on a locked disk, or you do not have write permission for this file." How can I get back into iTunes ?

I just finished using iTunes, closed out and then tried to get ack in. Got this message "The iTunes library .9tl file is locked, on a locked disk, or you do not have write permission for this file." How can I get back ino iTunes ?

I actually figured it out...I had to go to the iTunes Library Extras.itdb file and give myself permission to have full control. THEN, I could go and estore a previos version. Once I had done this, I got the same message for iTunes Library Genius.itdb . . . I did the same thing with it and Voila'!!
Hope this helps...
SVT

ITunes Match on Windows 7 64 iTunes 10.5.2 64 - - please sign in again itunes match has encountered an error. Please choose sign out and then sign in from the itunes store menu and try again.

Windows 7 64 itunes 10.5.2 64 - I receive the following error message when opening iTunes - please sign in again itunes match has encountered an error. Please choose sign out and then sign in from the itunes store menu and try again.
When I try to sign out iTunes freezes and I need to shut down windows entirely to get it to open again.
Has anybody been able to resolve this issue?

After many annoying sign-in-out-iTunes-match-activation problems I found an easy solution for me. When the iTunes Cloud symbol is broken (and I should sign in again) I just deactivate my notebooks (Windows 7) Wifi (with Fn+F5 for my Thinkpad).Then I call up the Itunes store and iTunes tells my that there is no connection to the internet (most probaply this step is not necessesary). After manual re-activation of my Wifi iTunes seems to re-establish the connection and the Cloud symbol signalizes that iTunes match does work, again.
Hope, this helps.

Can a time machine usb drive backup the data from an external usb drive connected to and airport extreme*

can a time machine usb drive conected to my mac book backup the data from an external usb drive connected to and airport extreme ?

Hi Adam, if you think yoiur HD may be failing you could do a TM restore onto the new disk. I would rather see you do a clone either SuperDuper or CarbonCopy Cloner.Of your internal drive. That way you have a bootable backup in case it does fail.
btw - what are the symptoms of your failing drive?
-mj
Message was edited by: macjack

External FW drive drops out and THEN!

Similar Messages

Maybe you are looking for