External Hard Disk disconnected while rendering, project disappeared now with a yellow exclamation sign triangle. Is there a way to recover it?
Hello,
I was working on a project located at a library in an external hard disk. The external hard disk was disconnected while FCPX was rendering. Once it was connected back there's no project in the event, I can't find it in Finder nor anywhere else and I get a yellow triangular exclamation sign icon. Has the project disappeared? Is there a way to find it? I have no backup
Recovering this is quite important for me.
I'd greatly appreciate any help or tips.
Try here for 10.1.1:
https://discussions.apple.com/message/25059825#25059825
Al
Similar Messages
-
External hard disk disconnected after recovery from prolonged sleep mode
helloI am new on this forum and hope I will not make any mistakes.On my Probook 4740s, if I go into the prolonged sleep mode, when I come out, my external hard disk (verbatim USB3 1To with 2 partitions) is disconnected and I must restart the PC.This does not happen if I go into the normal sleep mode.Thanks for your help
Hi @Karlo12333 ,
Welcome to the HP Forums!
It is a great place to find answers and information!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
Unfortunately coping the partition does not work. I don't thing you will be able to create recovery media from the copied partition on the external but if you have not yet created recovery disk you can give it a try.
If you cannot create the recovery media you will need to contact HP support to obtain a recovery kit.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping! -
Hi there! Yesterday, I installed Mavericks on my Macbook. Since then, it doesn't recognize my external hard disk drive anymore (at least not on the desktop. In Germany they call it "it doens't mount it". I don't know if it's the same expression in english?)
I just used it a week ago, before I did the update and it worked perfectly fine.
Is there anyone out there who knows a solution for this problem? I've been googleing for hours now and can't find any answer.
Thank you!!!Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
Which external hard disk format (fat32 or ntfs) is compatible with macbook pro ?
Hi . I just bought a macbook pro (13.3 inches) . As the internal storage is not much , i am thinking if buying an external hard disk . Please guide which format of external hard disk (fat32 or ntfs) is compatible with my mac.
Thanks .Paul-nz wrote:
Ouch! Bad day? .
One other option you might want to consider is exFat.
Its supported on Mac and Windows, and even my TV!
Its got very large file (128PB) and volume size support.
Cheers.
Not again.
The OP wants this to use with a PS3, which does not support exFat. So that suggestion (while quite correct on its face) won't work.
Maybe this will help you.
Check what the File System type is. Do this by going to Start, Control Panel, Administrative Tools, Computer Management, Disk Manager. Select the external drive and read the "File System" type. The file system type must be FAT32 in order for the PlayStation to recognize it.
Split larger, high quality files into smaller files, if necessary. FAT32 has a limit of 3.9 Gigabytes per file, which means some high quality HD movies might have to be split into smaller files, and that makes it less than ideal for some HD content.
2 for 2 -
Hello,
I just received my Mac and I am trying to see if there is an easy way to convert all my music files from my external harddrive on my PC to iTunes. Most, if not all, the files are in .wma format. Does anyone know if I am able to connect my external harddrive, convert the files, and add them to iTunes?If they don't contain DRM, use a program such as Switch. If they do, you can't.
(59769) -
I am not able to delete or write my files to my external hard disk drive what shall i do?
i am teja i brought a new mac book air here i am not able to write or delete the files that are present in a external hard disk drive what shall i do now to enable required permisions................plz reply me i am new to mac
I guess your external drive is Windows (NTFS) formattet.
By default you were only able to read from that drive, as Mac doesent support NTFS write.
If you want to have read/write access to a NTFS volume you have to use add-in tools like MacFuse or Paragon on your Mac.
Not having write or delete permissions on the external drive may also preventyou from changing existing files on that drive.
Right click on the drive in Finder and choose "Information" from the menu will give you more information about the reasons of your problem.
Lupunus -
How to copy a folder more then 4GB from from my iMac to a pendrive or external hard disk?
how to copy a folder more then 4GB from from my iMac to a pendrive or external hard disk?
i have an iMac 27inch with os x 10.8.You'll have to reformat the drive.
Assuming you want to use it with both Mac and Windows, reformat it on the Windows machine as exFAT (this is FAT64 as opposed to the standard formatting for those drives as FAT32)
exFAT has no file size limitations (for all practical purposes).
This will require the Windows machine to be on at least XP (with an update) and the Mac on 10.6.5 or higher
If it's being used only with Mac, reformat as GUID partition map and Mac OS Extended. -
Connect external hard disk with iMovie
I bought a new external hard disk and would like to connect that with iMovie. The disk is formatted with Mac format. When I start iMove, I can see the hard disk appeared in the Event Library. However, I cannot move the file into it and there is a yellow triangle signal appeared. Would you please kindly advise how to deal with it? Many thanks!
Hi
The disk is formatted with Mac format.
Mac can open and use many different formatting's - but for Video only one works (as I know off)
• Video - Mac OS Extended (hfs) (journaled or not)
Not - UNIX/DOS/FAT32/Mac OS Exchange - works for much BUT NOT FOR VIDEO.
Else - there is a size problem too
I just bought a 2Tb HD and was not able to format it unless I partitioned it into smaller volumes - I think that about 750Gb is OK so I made 4x500Gb. Then it was formatted OK.
Yours Bengt W -
How do i burn idvd projects in a dvd format to an external hard disk
I have an iDVD project but it is too big to burn to a dvd (11GB!) so I was wondering if I can save the proejct like a dvd onto my External Hard Disk. This is really urgent and important for a school project.
Thanks in advance.iDVD does not care about file size (it compresses a movie file by about 4:1 o the standard mpeg2 format), only about length.
A standard DVD will hold up to 120 minutes of video, but this includes titles, transitions etc.
iDVD encoding settings:
http://docs.info.apple.com/article.html?path=iDVD/7.0/en/11417.html
Short version:
Best Performance is for videos of up to 60 minutes
Best Quality is for videos of up to 120 minutes
Professional Quality is also for up to 120 minutes but even higher quality (and takes much longer)
That was for single-layer DVDs. Double these numbers for dual-layer DVDs.
Professional Quality: The Professional Quality option uses advanced two-pass technology to encode your video (The first pass determines which parts of the movie can be given greater compresson without quality loss and which parts can’t. The second pass then encodes those different parts accordingly) , resulting in the best quality of video possible on your burned DVD. You can select this option regardless of your project’s duration (up to 2 hours of video for a single-layer disc and 4 hours for a double-layer disc). Because Professional Quality encoding is time-consuming (requiring about twice as much time to encode a project as the High Quality option, for example) choose it only if you are not concerned about the time taken.
In both cases the maximum length includes titles, transitions and effects etc. Allow about 15 minutes for these.
You can use the amount of video in your project as a rough determination of which method to choose. If your project has an hour or less of video (for a single-layer disc), choose Best Performance. If it has between 1 and 2 hours of video (for a single-layer disc), choose High Quality. If you want the best possible encoding quality for projects that are up to 2 hours (for a single-layer disc), choose Professional Quality. This option takes about twice as long as the High Quality option, so select it only if time is not an issue for you.
Use the Capacity meter in the Project Info window (choose Project > Project Info) to determine how many minutes of video your project contains.
NOTE: With the Best Performance setting, you can turn background encoding off by choosing Advanced > “Encode in Background.” The checkmark is removed to show it’s no longer selected. Turning off background encoding can help performance if your system seems sluggish.
And whilst checking these settings in iDVD Preferences, make sure that the settings for NTSC/PAL and DV/DV Widescreen are also what you want.
http://support.apple.com/kb/HT1502?viewlocale=en_US -
I have a 1TB WD external hard disk, which suddenly cannot be detected in my system. When i connect the hardisk to the macbook, the disk appears and immediately disconnects with the message "Disk not properly ejected". Any advice ?
verify on another Mac if the same
WD is having issues with mavericks as you can see on the WD forum, did you install any WD software (never do that) when you connected the drive for the first time?
possible issue is a dead SATA bridge card or the new WD firmware w/ Mavericks.
SATA card issue
Your dead external hard drive is likely fine! Great hope for your 'faulty' external HD
http://community.wd.com/t5/External-Drives-for-Mac/bd-p/passport_mac
verify on another Mac if all possible -
I need to move my photo library and Movies (Events and Projects) to an external hard disk as my 700gb drive on my iMac is now full (*see note below)
I have brought 2 Samsung External drives (3TB each) which I plan to partition each for Photos and Movies i.e 2 partitions on each drive, and will use one for use with iPhoto and iMovie, and the other drive for a dedicated backup. I will backup the remainder of my iMac hardisk to a seperate disk.
What has just occured to me is that after I have moved the libraries I cannot see how existing iMovie projects and iPhoto Slideshows will work, as each Application will be looking for the source files on the original iMac hardisc (I assume).
I am running Snow Leopard v10.6.8 ( I did not want to upgrade to Mountain Lion as I was told the iPhoto and iMovie changes were a 'backward' step. However I now want to upgrade to Mountain Lion, for security updates reasons mainly, and so need to free up my hard drive.
Can anyone advise on the best way to proceed ?
* - the iMac hard disk become full very suddenly, possibly due to duplicates, as I have noticed duplicate events and clips in my iMovies event library. I have noticed that some events are also now not showing, with message 'No video clips match the current selection' (I have not search criteria set).
ThanksI was planning on manually backing up my external to the time capsule - but is there a way to set it up to back up automatically instead?
Time Machine will backup up automatically - you can not have your iPhoto library on the same volume as the TM backup (it will not work and it would not be a backup)
Dragging the iPhoto library to any external drive will backup it us also
I was also thinking about having the library copied to another external (I mean we're talking about irreplaceable photos here) - would i just drag a copy of the library to that drive as well?
Yes - that is a good idea - I run TM giving me hourly backups and a daily clone of my entire system giving me a bootable backup - plus do an occasional TM backup at our second home so I have one off site
is it possible to deal with my imovie library in the same way? so all my movies and photos are on my external?
Probably - but I use iMovie very little - better question for the iMovie forum
LN -
Menu bar items disappear, and external hard disks not mounting
Hi,
This problem started yesterday. I start up my Mac, and none of the menu bar items in the top-right of the screen show up. Then I noticed that none of my external hard disks had mounted.
Looking at the Activity Monitor, I saw that sustemuiserver was not running.
Reading around, I discovered that this usually follows a FrontRow hack (which I haven't installed). I tried deleting the ~/Library/preferences/com.apple.systemuiserver.plist file and logging out and back in again. Everything seems to work again, for a while. However, the same thing happened this morning.
Has anyone else experienced this, and anyone know a fix to stop it from happening?
Thanks!
TomI've been having the same problem for a while (I believe since 10.5.3). I have reinstalled OSX, installed OSX 10.5.6 combo hoping that it would fix it, but nothing yet. I have the problem only when I insert an expresscard into the slot and restart. It connects to a PCI expansion chassis. When I restart with the ExpressCard installed, all menu items dissappear and I can't eject volumes (hard drives) from the desktop. If I restart without the ExpressCard in, the menu bars seem to work properly. I tried with an older G4 running 10.4.11, with a CardBus card and the same chassis, and that worked fine... all menu bar items displayed and worked properly and I could eject disks.
I have also tried creating new users, but that didn't work either. -
Hi,
I am using Windows 8.1
I have an External Hard Disk i have partitioned it to 4 parts.
One drive is now inaccessible due to sudden power failure while listening Music from that drive few days ago.
Now it shows "Data error (Cyclic redundancy check)".
I tried all the procedures provided here like
chkdsk /f, diskpart, rescan etc
but no result :( (i mean all processes failed. They could not detect the drive).
Please help me to get those data, pictures and project files.
thank youThen why aren't you posting this in the Windows 8 forums found @
http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w8itpro
This is a Windows 7 forum for discussion about Windows 7.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ” -
How do i back up my imovies on an external hard disk?
Hello
i am trying to back up my imovies on a external hard disk
, i follow the instructions but everything is still in my computer!!
and now when i open updates project ,they are empty!....Command + R for OS X Recovery is for restoring from a backup.
You need to repair the startup disk.
Startup your Mac while holding down the Command + R keys.
From there you can access the builit in utilities to repair the disk.
About OS X Recovery -
Help!My Mac doesn't find my external hard disk
Today when I tried to open my mac it "stuck" on the first white screen (by the way my external hard disk was already connected).So, not know what to do, I disconnected the hard disk without ejecting it first, since my computer hadn't opened yet and then I switched it off using the switch off button. However, when I switched on my computer again it couldn't find the biggest part of the disk. I have to say that the external disk is split in 2 parts, Lacie and Exchange, in order to use it in both mac and windows respectively. Is there anything I can do to "make it come back"? Please, tell me that it's not lost...I've restarted it but yet nothing...
If you've followed Randy's suggestions above, and you say nothing shows up on the camera's LCD when you're connected (like DV IN), then I might suspect a bad firewire cable.
Remember, the Easy Setup should be chosen first; then you should be capturing into the project with that Easy Setup. If you've chosen the DV NTSC setup, what happens when you open the log and capture window? Does it say "VTR OK" under the view window, or does it say "NO COMMUNICATION?"
If the latter, again, you may have a bad cable. If you're getting the VTR OK, then try controlling the camera with the transport controls in the log and capture window. It should work.
Maybe you are looking for
-
Can I use a Forms as a Library to other Forms?
I am converting our Forms 3.0 Application to 9i. I am currently looking to convert via the easiest path so we can start developing with the new technology. In Forms 3.0, we have a Library of common procedures which is actually a Form. In Forms 3.0, o
-
Hi Gurus, I got an issue of SAP NW BPM deployment after I developed a NW BPM process example. The BPM example is used for interacting with SAP PO AEX for message orchistration. I paste the error text as below, hope someone could help me: ============
-
Display randomly falling asleep
My PowerBook has begun to randomly go into sleep mode while I am in the process of using it. The screen simply goes dark, the sleep light indicator on the front of the computer begins to slowly flash, but it is only half as bright as full sleep mode.
-
I have two user accounts. Mine is an administrator's, and my daughter's is not. When I ran a search in spotlight in my daughter's account, I saw that my Safari History and iChat transcripts are visible from her profile. How do I hide these files so t
-
Basic Quick Selection Tool Question
Is this just a newer way to do the same thing the other selections tools have been doing for years OR is there a benefit to this tool over the other selection tools?