External hard disk wouldnt work !!

Hello All,
I just bought a Toshiba external hard disk and my Mac doesnt read it. I receive this must every time. I've tried it on Windows and it works just fine. I'm using OS X 10.9.3 .
please help !!

It appears you used to have MacFUSE installed, and it is no longer functional.
Either take QuickTimeKirk's advice and reformat the drive to "Mac OS Extended (Journaled)", exFAT, or FAT32.
Or find the latest version of FUSE for Mac and get that properly setup.

Similar Messages

My external hard disk not working properly in my macbook pro . anyone help me . its seagate hard disk

My external hard disk not working properly in my macbook pro . anyone help me . its seagate hard disk

You need to get some software that allows your Mac to read and write to the NTFS disk. There's a whole bunch of stuff out there, but this program has a good review, and you can try it for free. I would move everything off of your external drive, reformat it into Mac OSX extended, and use it for your Mac. You don't need NTFS anymore, unless you still have a Windows computer that needs it.

External hard-disk not working with firewire under Snow Leopard

Hi. I have a LaCie d2 external hard-disk that has Firewire 800, 400 and usb2. I previously used it on my old (angle-poise) iMac connecting using the Firewire 400 socket. I've just a got a new mac with Snow Leopard and I thought it would we best to connect to the LaCie with Firewire 800. However when I do this, the disc mounts ok, but browsing in the Finder is really slow and copying files from the disk to the imac seems to work at a really slow rate (less than USB1 speed) if at all ! However, I switched to using the USB2 connection instead and it works like a dream. What gives ? Is Firewire in Snow Leopard buggy ??

There's no problem with the drive.
Maybe true, and the drive would probably work fine with Leopard. One thing that's obvious is that Apple did make changes in the way that FireWire works in Snow Leopard. Many drives and drive manufacturers work well with SL, but there have also been reports of firmware issues by Western Digital and other companies.
Have you checked with your vendor to see if they are offering a firmware update for your drive?
BTW, I got a new FW case a few months ago while at a Fry's electronic store. The brand new USB2 and FW400 cables worked fine. The FW800 cable did not, but another cable came to the rescue. Just saying...

Upgraded to 10.10.3, the external hard disk keep working and spinning after I ejected successfully, and the HHD keep lights up, feel unsafe to unplug it

I tried on two macbook air, same situation.
This never happen on 10.10.2 or previous version. (The HDD light will off and it will stop running after I ejected before.)
I feel unsafe to unplug the external hard disk when its still light up and running.
I am using Macbook book air 2012 and 2013 with seagate backup plus....
Anyone have same problem? how to fix it?
or its ok to unplug the HDD while the HDD light is still on and running?
MacBook Air, OS X Yosemite (10.10.3)

I have a G-Tech external hard drive that continues to spin after I have unmounted it and if I disconnect it while it is spinning it makes a very nasty sounding clunk noise. In my case it started doing this after I enabled FileVault a couple of years ago. I have found that if I unmount it and then wait 6 minutes it will stop spinning. It is inconvenient but I only use it once a week and the clunk sound is scary enough that I put up with the wait.

External hard disk not working

Hi, i have a hard disk that is connected via usb. It worked recently and still does on a PC but not accessible or even showing in iMac. Anybody know what i have to do to get it working again?

How is the disk formatted and has it ever worked on your iMac? I suspect it's formatted for the PC as NTFS which OS X will read but not write to. If you must share this disk with both your PC and Mac then you should first determine how it's formatted and if it can be shared. In the event it's formatted as most external HD's for NTFS then I'd recommend downloading and installing NTFS-3G will allow the Mac to write to it. You can find this at:
http://www.macupdate.com/app/mac/24481/ntfs-3g
If it's a simple matter of not being seen by the Mac then try resetting the SMC, don't be afraid to reset it 2-3x if the first time doesn't work.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

What external hard disk will work on both windows and mac?

I need to buy a hard disk that will work in both mac and windows. i live in India and will buy it from ebay.in
Can you please suggest a 2 TB hard drive (external)

best options for the price, and high quality HD:
Quality 1TB drives are $50 per TB on 3.5" or $65 per TB on 2.5"
Perfect 1TB for $68
http://www.amazon.com/Toshiba-Canvio-Portable-Hard-Drive/dp/B005J7YA3W/ref=sr_1_ 1?ie=UTF8&qid=1379452568&sr=8-1&keywords=1tb+toshiba
Nice 500gig for $50. ultraslim perfect for use with a notebook
http://www.amazon.com/Toshiba-Canvio-Portable-External-Drive/dp/B009F1CXI2/ref=s r_1_1?s=electronics&ie=UTF8&qid=1377642728&sr=1-1&keywords=toshiba+slim+500gb
2.5" USB portable High quality BEST FOR THE COST, Toshiba "tiny giant" 2TB drive (have several of them, LOT of storage in a SMALL package) $117
http://www.amazon.com/Toshiba-Canvio-Connect-Portable-HDTC720XK3C1/dp/B00CGUMS48 /ref=sr_1_4?s=electronics&ie=UTF8&qid=1379182740&sr=1-4&keywords=2tb+toshiba
*This one is the BEST portable external HD available that money can buy:
HGST Touro Mobile 1TB USB 3.0 External Hard Drive $88
http://www.amazon.com/HGST-Mobile-Portable-External-0S03559/dp/B009GE6JI8/ref=sr _1_1?ie=UTF8&qid=1383238934&sr=8-1&keywords=HGST+Touro+Mobile+Pro+1TB+USB+3.0+7 2 00+RPM
Most storage experts agree on the Hitachi 2.5"
Hitachi is the winner in hard drive reliability survey:
Hitachi manufacturers the safest and most reliable hard drives, according to the Storelab study. Of the hundreds of Hitachi hard drives received, not a single one had failed due to manufacturing or design errors. Adding the highest average lifespans and the best relationship between failures and market share, Hitachi can be regarded as the winner.

Finder freeze when opening folders of my Western Digital external hard disks

I'm facing a big issue. I'm runnin' Mac Os Lion, I realized a clean install a few days ago. Everything is going fine, but every time I plug an external hard disk on my MBP, I can see the disk appearing on my desktop or in the finder, and when I open it, the finder freezes, I have to reboot manually, or wait to relaunch the finder. My disks are in HFS format, used to work great on Snow Leopard no longer than a week ago... What is weird is that my time machine (external hard disk usb) works fine... Moreover, I can see the disks in the Disk Utility, I can't click on "verify permissions" but on "verify disk" and it says that the disks are fine... Any idea ?
PS : I could have erase everything on them and reformat, but I need the files inside...
Thanks

Hi!
Here's a suggestion from BDAqua:
In finder, select Go menu>Go to Folder, and go to "/volumes".
Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
Drives with an extra number on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a number, and reboot.
cornelius

Time Machine requires me to reformat my external hard disk

I have a Maxtor 1TB external hard disk that works fine with my Mac. It has been formatted to FAT32 format so I can use it on Mac and PC. When I tried to setup Time Machine to back up to this drive, I was told I needed to reformat my external hard disk as the format was not recognised. Do I have to get a separate external hard disk to use with Time Machine? Why the discrepancy in formats? If I get another external hard disk and reformat it according to the requirement by Time Machine, will that mean that I cannot use that hard disk with a PC? What is the required format recognised by Time Machine anyway.
Thanks for your answers.

If I get another external hard disk and reformat it according to the requirement by Time Machine, will that mean that I cannot use that hard disk with a PC?
Yes, unless the PC has software such as MacDrive installed.
What is the required format recognised by Time Machine anyway.
Mac OS Extended (Journaled). Time Machine has usage requirements beyond Mac OS X's general ones.
(52969)

Recently upgraded Mac 24" to Lion (clean install) and now no external hard disks work with Time Machine

Recently upgraded Mac 24" to Lion (clean install) and now no external hard disks work with Time Machine.
installed new internal disk first with fresh 10.7.3 Lion software. Also upgrade ram to 4GB. Work great, super fast.
BUT.... my WD 1TB firewire400 external disks no longer work with the Lion enabled machine now.
FURTHER... I read somewhere that WD is problematic with Lion but Seagate was not... so I went and bought a new 3TB Seagate GoFlex.
When it didnt work properly either, I patiently searched and found a software/firward upgrade and applied.
I re-partitioned disk to extened/journaled standard, etc.
Then assigned the particition to Time Machine. Drive turned the blue/grey color, so I thought it would work.
But, it has now been in "preparing" mode in Time Machine for HOURS....
What is up Apple? So dissappointed. Ive read these type of problems are notorious with Lion and I wish I never upgraded.
Are you trying to make issues with External disks, to drive people to iCloud? That trick ont work in me. I will not reward bad behaviour Apple.
Please provide a fix... I wasted hours/days screwing around with this, instead of using the Mac for what its intended!

Solved by Pondini, on another thread I opened...
Answer:
Sounds like either:
A directory problem on your internal HD. Verify your internal HD, and Repair any other volumes being backed-up per #A5 in Time Machine - Troubleshooting.
Something in OSX may be damaged. You've tried the "combo," so a fresh copy of OSX (that won't disturb anything else) would be worth a try (and you don't need a tech for that). See Installing the ''combo'' update and/or Reinstalling OSX.

If i move my iphoto & iMovie source library / Events and Projects to an external hard disk, due to size, will my existing slideshows work ?

I need to move my photo library and Movies (Events and Projects) to an external hard disk as my 700gb drive on my iMac is now full (*see note below)
I have brought 2 Samsung External drives (3TB each) which I plan to partition each for Photos and Movies i.e 2 partitions on each drive, and will use one for use with iPhoto and iMovie, and the other drive for a dedicated backup. I will backup the remainder of my iMac hardisk to a seperate disk.
What has just occured to me is that after I have moved the libraries I cannot see how existing iMovie projects and iPhoto Slideshows will work, as each Application will be looking for the source files on the original iMac hardisc (I assume).
I am running Snow Leopard v10.6.8 ( I did not want to upgrade to Mountain Lion as I was told the iPhoto and iMovie changes were a 'backward' step. However I now want to upgrade to Mountain Lion, for security updates reasons mainly, and so need to free up my hard drive.
Can anyone advise on the best way to proceed ?
* - the iMac hard disk become full very suddenly, possibly due to duplicates, as I have noticed duplicate events and clips in my iMovies event library. I have noticed that some events are also now not showing, with message 'No video clips match the current selection' (I have not search criteria set).
Thanks

I was planning on manually backing up my external to the time capsule - but is there a way to set it up to back up automatically instead?
Time Machine will backup up automatically - you can not have your iPhoto library on the same volume as the TM backup (it will not work and it would not be a backup)
Dragging the iPhoto library to any external drive will backup it us also
I was also thinking about having the library copied to another external (I mean we're talking about irreplaceable photos here) - would i just drag a copy of the library to that drive as well?
Yes - that is a good idea - I run TM giving me hourly backups and a daily clone of my entire system giving me a bootable backup - plus do an occasional TM backup at our second home so I have one off site
is it possible to deal with my imovie library in the same way? so all my movies and photos are on my external?
Probably - but I use iMovie very little - better question for the iMovie forum
LN

My Macbook Pro mid 2012 is not reading/connecting to my (working)external hard disk(also not showing in disk utility)

I connected my 500GB Storjet external hard drive to my mac(Mountain Lion) http://in.transcend-info.com/products/Catlist.asp?modno=325 but it is not connecting to it. Disk Utility is also not showing it. and the hard disk is working... My PS3, My Sony TV and my other laptop(win7) is detecting it... Also whenever it gets connected a blue light blinks, but It doesnt for mac. I have tried reformatting to both FAT32 and NTFS... Please help..
Also I sorta screwed my Mac so I had to do the internet recovery thing and only after that such problems occured, it was working fine before. So it installed Lion first and then Mountain Lion. It wasn't working on any of the OS.

Power down the Mac, Full power off. Connect the drive using the Y cable and then turn the Mac back on.
If it still doesn't show in at least Disk Utility then start checking your USB ports to see if both are working properly. Just plug in a USB thumb drive and that should show in both Finder and Disk Utility. If one of the ports isn't seeing the thumb drive then that port is bad and the system needs to be services by Apple.

My USB external hard disk won't work anymore after I updated to 10.4.10

As I said in title since it's quite urgent to me. ALL of my files is in my external hard drive. It's format as FAT or FAT32 I can't remember since I use it between mac and PC. More than that IT IS WORKING FINE UNDER PC. Before updating to Mac 10.4.10 I used my hard disk fine till I updated to this version. I plug in my usb port and after a hours it still won't be detected. I can find my hard disk in finder or desktop. I have tried plug my hard disk to other MacBook or Mac Pro but still won't work anymore. However it's working fine under PC or when I started my MacBKPRO as WindowsXP under bootcamp, my hard disk is working fine, too.
I have search this forum and seems someone have got the same problem as I face. I don't know what to do...and I feel so disappointed to Mac.

As Mac OS X has no known viruses in the wild, that leaves you with one of three possibilities.
1. When connected to the Windows machine, a virus has written over a critical boot block area which allows the drive to become crossplatform. Get the latest Windows virus detection software and make sure the drive is clean of Windows viruses.
2. The firmware that allows it to communicate driverless has become corrupted on the drive case. Replacing the drive case itself will eliminate that problem, as suggested earlier.
3. The directory damage is just enough that the boot block itself is damaged. Backup any critical data from the drive onto the Windows machine first, and run Alsoft Disk Warrior 4.0 to repair the directory and see if that works.
The fact that Mac OS X 10.3.9 won't read it basically eliminates this as a 10.4.10 problem. Only a boot block or firmware issue like this could make a drive not readable on one platform, but readable on another.
P.S. please note the nomenclature of Mac, versus MAC on this user tip, as it appears you haven't learned it:
http://discussions.apple.com/thread.jspa?threadID=503342&tstart=10

•I have just bought a Toshiba external hard disk to back up all my work from my macbook and its not working! I have checked the hard disk

•I have just bought a Toshiba external hard disk to back up all my work from my macbook and its not working! I have checked the hard disk

its not working: (sorry for being so ambiguous), the computer recognises it, it comes up on my desktop, when i open it and try and drag a file across, it is unable to go into the drive, there is just a symbol indicating 'no' (i've read the instructions from Tosheba and there is no help). I have not partitioned the drive using the GUID partition scheme - i dont know what this means?!

My external hard disk ( TRANSCEND ) is not working when i connect to usb..before it was working..

my external hard disk ( TRANSCEND ) is not working when i connect to usb..before it was working.

1. These are the iphone forums. So what does your question have to do with iPhones?
2. Contact Transcend for support.

Unable to capture files into external hard disk because of 'drop frames '

I haven't been able to capture footage from my DV camcoder thru firewire to an external hard disk in FCP because i get a message saying 'drop frames were detected'.
This happens when i selected this external hard drive as the scratch disk in FCP.
When i deslect it and select my user hard disk as the scratch disk, the capturing works perfectly. But i just want to capture all my capture files into the external hard disk, not my user hard disk.
The external hard disk's speed is 3500 - could that be the problem? Is it too slow? Its connected thru USB and it is Mac Os Extended Journaled. Its got 250gb of space, so that's not the issue.
Can anybody help me?
Thank you.

No, its a Panasonic gs180, a really good camera.
The camera itself is connected to my computer through firewire. Its the hard disk enclosure that is connected to my emac through USB. Anyway, i'm sure that's not the problem, casue like i said, the capturing works fine when i use my user hard disk as the FCP scratch disk.
The problem i have is when i try to capture footage from my camera to the external hard disk enclosure. When i press 'capture now' and press play, the playback stutters and a messsage appears saying, "drop frames detected" and the capturing stops.
I feel like i need to adjust something in FCP itself - like a preference or something - just not sure what.
Thnx for your suggestion though and if you know what i should do, please let me know.

External hard disk wouldnt work !!

Similar Messages

Maybe you are looking for