External hard drive and lightroom

I have a macbook pro with 2 G memory. I am running out of space on my hard drive. I want to put my photos on an external drive.
I want to get:
a plug-in work horse for full backups
another external for just photos.
I tend to work around the house with my laptop so I would like to get a small drive for the photos. I am thinking of a bus driven drive. are they just too slow to be really useable. right now I have a very fast setup but never have used an external drive.
another possibility would be to have another plug in hard drive for photos and drag the photos i want to work on to the hard drive in my laptop. I want to do this ONLY if it is simple
thank you
diana

>Another question would be what is the best way to move the files to another drive so that LR won't make me locate every folder by hand?
I've seen this question pop up a few times and so far no one has suggested what I would do: It seems intuitive to get the new HD hooked up and test it out a bit using the Operating System and then, when confident that the drive works, just use LR to move the Image Files to the new drive. No question about LR finding the files that it moved itself.
Is there any problem with this approach?

Similar Messages

  • I have a disconnect between my external hard drive and lightroom 5.6.  The recommended steps do not connect 11000 photos on the hard drive.  How can I connect?  I am concerned I have lost my edits in lightroom.

    I have a disconnect between my external hard drive and lightroom 5.6.  The recommended steps do not connect 11000 photos on the hard drive.  How can I connect?  I am concerned I have lost my edits in lightroom.

    after some sorting out your article, I clicked on a question mark with the message find the missing folder.  This brought me to a page where I could choose a folder by year and click on it.  The question marks disappeared and the photos were available.  In some cases I had to click on the year folder for each subfolder by date.
    The find missing folders message did not bring me to the finder window in which I could click on folders in the hard drive itself.  I appreciate your help big time!!

  • I made a Blurb book through Lightroom 5, on another computer, backed it up on an external hard drive and tried to import it into my imac.  I got the picture files, but could not get the book I had worked on.  How do I find my book?

    I made a 'Blurb' book using Lightroom on a computer that was not mine.  I backed up the book on an external hard drive and then tried to import the book into my imac.  I wasn't able to retrieve my book.  The photos I used for the book project are there, but the 45 page book I made is not there.
    What do I need to do?

    You would need to go to the computer containing the book.
    Select the saved book in the Collection panel.
    Go to Grid View [ G ] and select all the images [Cmd/Ctrl][A]
    File>Export as Catalog and store on media you can use to transfer
    Bring this catalog onto your computer
    File>Import from another catalog and bring the transitory catalog into your master catalog.
    It should bring the images, your collections (including your book) and other settings into your own catalog.

  • Using an external hard drive with Lightroom

    I have older photos on an external hard drive and my newer ones on an internal hard drive.  If I plug in my ext hd and load those photos into Lightroom, do I have to always have it plugged in to be able to edit/view those photos?

    For Lightroom 4 and earlier, yes you must have the drive plugged in to edit or view the photos (although Lightroom will display a thumbnail in the Grid module even with the drive not plugged in)
    For Lightroom 5, if you create smart previews, then you can view and edit the photos even when the drive is unplugged.

  • Renamed my external hard drive and now cant find photos

    After renaming an external hard drive, what do i do to 'update my folders in lightroom' where to go to find my pics i edited and save to that drive. i originally had it named 'My Book' and renamed it "external 2". i even renamed it back to 'My Book' and lightroom still doesn't show them in the folder area.
    thanks for the help

    thanks for all the great info!!!!!
    Show me your passion and I'll immortalize it.
    Scott [email protected]om
    Date: Thu, 4 Feb 2010 16:04:43 -0700
    From: [email protected]
    To: [email protected]
    Subject: Renamed my external hard drive and now cant find photos

  • When trying to import images from an external hard drive into Lightroom 5 it states no preview for the files selected

    Go easy on me here….
    Trying to import images from external hard drive into Lightroom 5 but the selected images state 'no preview for file'.
    All other images on the external hard drive can be previewed and imported without issue.
    I have tried adding the images onto the computers hard drive as well but still no joy.
    I've used Lightroom 5 previously and had no issue so convinced its the files I'm trying to import (jpeg files).
    Any help greatly appreciated.

    Go easy on me here….
    Trying to import images from external hard drive into Lightroom 5 but the selected images state 'no preview for file'.
    All other images on the external hard drive can be previewed and imported without issue.
    I have tried adding the images onto the computers hard drive as well but still no joy.
    I've used Lightroom 5 previously and had no issue so convinced its the files I'm trying to import (jpeg files).
    Any help greatly appreciated.

  • I imported my photos from an external hard drive into Lightroom, edited my photos but what next...?!

    Adobe,
    I imported my photos from an external hard drive into Lightroom, edited my photos and when i decided to export them the originals had not been updated and the deleted photos had not been deleted. How do i set it up so that once i import the photos, edit them and export they are then placed back in their original folder edited and updated?
    I have managed to export the photos to another file but these were exported with an Adobe.xmp file. What is this and is this necessary?
    Thanks for your help!

    It's important to realise that LR is a DAM (Digital Asset Management) application - no images are actually imported into LR only links to where they are. Secondly, the details of any edits that you make to your images are kept only in the database and/or xmp files depending how you set this up in Preferences. In the general workflow e.g. edit in Lightroom, further edit in Photoshop and returning to LR then creating xmp files aren't really necessary. So just to emphasise - edits are stored in the LR's database, the original RAW images themselves don't change (non destructive editing). You can prove this yourself by desaturating an image (turning it into a B+W) and then look at the original images in Explorer - you'll see it's still being shown in colour.
    Exporting an image is something different. By implication, you've finished with the image and perhaps want to save an image for posting on the web somewhere. Now assuming your not using any additonal and freely available LR export plug-ins, one way would be to Export a jpeg image to a folder on the desktop and this is allowed for in the Export dialogue. At this time LR reads any edits from it's database and applies those to the exported jpeg (or tiff) file it's going to send to the folder on the desktop.
    As mentioned earlier, any edits and keywords etc are stored in LR's database - original RAW files remain untouched. XMP files also store the edits if LR is set up to create xmp files (in Preferences) but these are not really necessary unless you are going to be editing an already edited RAW file in another application. As an example - you import into LR's library a scanned negative. Now because strictly speaking LR isn't designed to work with negative images, you now open this file via Bridge into ACR and from here reverse the negative into a positive image. All fine and good except when you go back into LR what's shown is still a negative so what is needed is to update the metadata (LR > Metadata > Read Metadata from file) which will force LR to read the newly created metadata from the xmp file that Bridge generated. As already suggested, if you're happy editing your RAW files in LR and only LR then xmp files aren't really necessary - all the data being saved in LR's database.
    Hope this has been of some help but if I might also suggest, purchasing a good book on LR from the outset thus getting to really know LR will pay dividends further on down the line.

  • Backing up photos on iMac using external hard drive and time machine

    How do i back up photos from my imac using an external hard drive and time machine
    Thanks in advance

    Apple explains how to use Time Machine in http://support.apple.com/kb/ht1427.
    Setting up and using TM is very simple to do, connect any external HD (format as Mac OS Extended (Journaled) using Disk Utility ) and your computer shoudl ask if you want to use that EHD for a Time Machine backup. If you have any questions visit your local Apple Store or reseller and they can answer how to setup and use TM and also should be able to offer suggestions on EHDs. My personal preference is OWC (www.macsales.com) Mercury Elite Pro due to the build quality and OWC's level of support.

  • I have itunes directory on an external hard drive and want to direct a new installation of itunes on windows 8 to use it. I tried holding down ctrl and clicking itunes and after many tries got it to work one time. When I went back in later it had reverted

    I have itunes directory on an external hard drive and want to direct a new installation of itunes on windows 8 to use it. I tried holding down ctrl and clicking itunes and after many tries got it to work one time. When I went back in later it had reverted back to a blank version of itunes and I cant get ctrl to work again. Any other ideas?

    This is sometimes caused by a problem with the iTunesPrefs.xml file, normally found at C:\Users\<User>\AppData\Local\Apple Computer\iTunes\iTunesPrefs.xml. Try dragging this to the desktop and trying again.
    Alternatively the problem may be that you have McAfee AV and it is preventing iTunes from updating the same file and thus causing the problem. See Why does iTunes delete my itunesprefs.xml? for details.
    tt2

  • Backing up images on external hard drive and restoring to new internal driv

    I recently purchased a new external hard drive and a new internal hard drive. Before installing the new internal drive, I backed up the old internal drive on the external drive. Then I installed the new internal drive to my Macbook Pro. However, when I tried to access and print my Aperture images on the new internal drive, I received an error message saying "versions with unavailable master images cannot be printed." I clicked on 'show referenced files," but couldn't determine how to recover my master images. I checked the forum and under "referenced files go offline after restore from a backup" it said to go to "File>manage referenced files" but nothing else. How can I recover my master images? Please help - I have nearly 6000 images that are lost without recovering the master images. And no, I was ultra stupid in not placing everything in a vault = but I'm relatively new to Mac OS and thought a backup would be sufficient. Thank!

    The volume name of the new hard drive needs to be the same as the old hard drive - rename it if you have to - then they should be fine.
    If you cannot seem to make this work then you will have to reconnect them with locate referenced files under the file menu. Select all the files that are disconnected before going into the dialog.
    RB

  • I didn't safely eject my external hard-drive and now my files are not showing up on my other computer?

    I didn't safely eject my external hard-drive as my imac was in sleep mode and I thought it was shut-down. Now I have turned up to uni and plugged my hard-drive into the uni computers (apple) and the word document I was working on last night (before my computer went to sleep mode, and it may still have been open, I cant remember) is gone.....
    I have phoned home and got a family member to try and recover the file. They said they can see it when they open Word under recent documents, however its "ghost" and nothing happens when you click on it.
    My question is, when I go home and plug my hard-drive back into my imac, will I be able to recover this word file? or have I lost it forever?

    I only saved it to my external hard-drive and saved it at the completion of working on it. However left the document open, went to dinner, and this morning pulled the hard-drive out, whilst the computer was asleep not shut-down and now the file doesn't appear.
    I thought when I clicked save then it saved straight away, therefore anything i do after that point (ie a un safe ejection) shouldn't make a difference. Clearly, no matter if you saved the document, if you un-safely eject the hard-drive then the file is lost anyway?

  • My songs have all been duplicated.  All my music is on external hard drive and I want it to stay there.  Am using a new computer and thought I'd done all the required things for my library to show on iTunes 11.

    I'm using a new computer.  All my music is on an external hard drive and I want it to stay there.  Before installing iTunes on the new computer, I followed turingtest2's instructions as to the layout of all the iTunes folders (Itunes folder, Itunes Media, Music, etc...).  I also followed his instructions as to get all my music in iTunes on the new computer (but keeping all the media on the external drive).  Now my songs are all duplicated in my library (I normally have about 15,000 of them). They all play when I click onto them.  Also, I've lost all my playlists, and all the songs in the library are now ticked. I've already spent hours trying to sort this out, but can't seem to find a solution.  Help please!

    Hi turingtest2,
    Thank you for replying.  I've been looking at your posts about setting up iTunes using an external drive.  A bit of background info.  My old computer broke down, so I got a new one from work.  I've always kept my music files on my external drive (I have around 170GB of music).  I didn't follow the suggestions in the "migrate iTunes library" post because my old computer died on me.  However, I've looked at your posts about lay out of the iTunes folders.  Before connecting to iTunes on the new computer, I had reorganized my iTunes folder on my E: external drive, and created an iTunes folder which contains an iTunes Media subfolder.  The music files are in a Music folder, which is in the iTunes Media folder.  I've also put the following files in my iTunes folder: iTunes Library.itl, iTunes Library Extras.itdb, iTunes Library Genius.itdb, iTunes Music Library.xml, as well as sentinel.  I then followed the advice you gave bmw99 on 2 Nov 2013 at 9.58 (sorry, can't copy the exact answer). 
    Just to clarify:  I'd like to keep all my music media on the E: external hard drive (the computer hard drive is too small), and I'm aware i might never have my playlists back, and that all the songs in my library might be ticked.  However, I don't want my library to be duplicated. 
    I'm at work at the moment, but will be back home in about 10 hours, so I can be more specific about folders / files names. 
    I'm glad you picked up my message and greatly appreciate your help.
    Patrice

  • I am trying to save a doc. to a external hard drive and it wont allow me. I says its read only, any ideas on how to correct it?

    I am trying to save a doc. to a external hard drive and it wont allow me. I says its read only, any ideas on how to correct it?

    Save it on the internal HD then copy it from this safe location to the external device.
    iWork applications can't apply their save process on devices which aren't formatted as HFS+.
    But it may also be that for some reason, an external device formatted as HFS+ is set to Read Only.
    If it's this case, you will have to change de setting before moving the file on it.
    Yvan KOENIG (VALLAURIS, France) vendredi 20 mai 2011 11:01:05
    Please :
    Search for questions similar to your own before submitting them to the community
    To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

  • How do I back up my itunes to an external hard drive and restore from same if necessary

    How do I back up my entire itunes to an external hard drive and restore from same if necessary.
    Thanks

    This is where iTunes stores backups for different operating systems: http://support.apple.com/kb/HT4946
    I do not use a Windows machine, have a Windows Vista Dell I rarely startup now.  But, from what I remember with Win boxes is, you will have to create on the external hard drive a file system like that one iTunes normally uses, and then in the iTunes preferences or control panel edit the location for the storage to specify the name of the external hard drive, or its letter code, with the name of that file system you created on the exernal drive.
    I would also move all of the files from the internal file system to the external since you have now told iTunes that is where they are...before deleting from the internal drive, test iTunes to see that it goes where you want it to go.

  • I just need to know how you get an iTunes library off the original hard drive of a mac and onto an external hard drive and still have it work normally?

    I just need to know how you get an iTunes library off the original hard drive of an imac and onto an external hard drive and still have it work as it normally would?

    http://support.apple.com/kb/HT1449

Maybe you are looking for

  • Context configuration exception

    Hi, We have a RFC enabled function moudule which returns 2 tables as TABLES parameters. when i use the table1 parameter for a drop down field, it works perfectly. The values are fetched by the RFC and populated in the drop down. But when i use the ta

  • Photoshop CS5 installation trouble - ' Installer failed to initialize '

    Greetings, Having trouble with a CS5 photoshop installation on my 4,1 2.5ghz 6gb RAM MBP.  Download goes fine, disc mounts to machine, but I get stuck on the ' Installer failed to initialize' page.  Downloaded the reccomended support advisor app, whi

  • 0FI_AP_6 assigning to DSO --Issue

    Hi, I have this std Datasource 0FI_AP_6. This when i try to assign to a custom DSO (copy of Std DSO 0FIAP_O06) i am getting infopackage assignment as well which was used in earlier datamodel.. i do not wan to have old infopackage in the new DSO assig

  • Time machine always propose a new fresh backup

    Hi all, I am running an iMac 21.5" Late 2012, with an Intel Core i5 at 2,7 GHz, 8Gb RAM. I have recently (some months) moved from Mavericks to Yosemite (by the way, experimenting a general slow down is the system, I have brought my mac to an Apple St

  • Complainin​g about the Blackberry hub

    I just update my blackberry z30 last night but there was an error in the blackberry hub. The hub is always in landscape even i turn on the rotation lock.  But when i turn off the rotation lock, it was normal i can do both portrait and landscape.