External Hard Drive beeps and freezes

Hey everyone. I had an External Western Digital Ultra IDE hard drive hooked up to my Ibook G4 via USB. The drive was working fine with no problems for several weeks. It started giving me problems with I formatted my Ibook and then reconnected the hard drive. (I'm not sure if this is related though) Thing is, the drive works great as long as I'm continually accessing data from it (i.e. playing music non stop), but if I am not pulling stuff from it, after about 2 minutes it starts to make beeping noises and the blue light that is usually lit up on the enclosure goes off and then I can't access the drive at all. So I just have to turn the power off...turn it back on...and it's fine...as long as I'm using it. I don't think its the hard drive because it works fine and no data lost as long as I'm using it. Could the enclosure be blamed or perhaps could it be some kind of power settings...like it is going into hibernation or the like? Please help!!!!

It was selected to put the hard drives to sleep whenever possible so I unselected that but that same thing keeps happening. I have waited a long time. Once the blue light goes out after those beeping noises thats it, I have to restart it because it isn't recognized by my ibook anymore, the external hard drive icon disapears and everything.

Similar Messages

HT3275 My Time Capsule has been backing up without any problems and all of a sudden it stops reading on my computer. The external hard drive beeps three times and the motter wont run within. What happened?

My Time Capsule has been backing up without any problems and all of a sudden it stops reading on my computer. The external hard drive beeps three times and the motter wont run within. The light that usually blinks while in use is no longer blinking and is on constant. What happened?

abailey46 wrote:
My Time Capsule has been backing up without any problems and all of a sudden it stops reading on my computer. The external hard drive beeps three times and the motter wont run within. The light that usually blinks while in use is no longer blinking and is on constant. What happened?
Sorry we are unclear as to the external hard drive and its connection to the TC..
For instance the light that blinks.. is that the TC or external hard disk or what.
Did you try just rebooting / restart the whole network in correct order.. modem.. router / TC.. external drive.. clients with 2min gap between each.
Are you actually running Snow Leopard as the profile states?
How old is the TC?

How do I re-download podcasts? My external hard drive failed and I can't figure out how to download them again in the updated iTunes.

How do I re-download podcasts? My external hard drive failed and I can't figure out how to download them again in the updated iTunes.

The Time Capsule drive is a network drive. You have to mount it on the desktop before you will be able to drag/drop files onto the disk. More tips are in this thread:
https://discussions.apple.com/message/17312017#17312017
.....and then delete them from the Mac to free up space?
The Time Capsule was designed for your backups.
If you move a file to the Time Capsule drive and delete the file from your Mac.....you have no backup.
Your only copy of the file will be on the Time Capsule drive. I would only do this with files that I could afford to lose.
All drives fail. When.....not if....the Time Capsule drive has a problem, you will lose your data.

Has anyone enabled time machine using a linksys router and external hard drive? And if so how?

Has anyone enabled time machine using a link sys router and external hard drive? And if so how? I have a Linksys E4200 wireless router with a usb port on it. I also have a Western Digital Elements 1TB external hard drive. I would like to be able to use this hard drive with time machine. Has anyone done so and if so how can I do so?

You might get some responses, but we don't see many Linksys users on an Apple forum so it may be awhile before you see an answer.
It might be useful to point out that Apple does not even support Time Machine backups to the USB port on their own AirPort Extreme wireless router, so we may be heading down a very slippery slope here.
I've tried Time Machine backups on an AirPort Extreme router a number of times in the past. It's just not reliable. Works for awhile, then has corruption problems. Or has corruption issues immediately. I once went a month or so and thought I had it nailed, then got smacked with a corrupted set of backups again.
But, I guess you never know. It might work on the Linksys. If you decide to try this, I would suggest that you have another backup plan in place for your important data.
Hope that some Linksys users will respond so we can all learn.

Is there a way to use the time capsule as an external hard drive only and disable the wi-fi function ?

Is there a way to use the time capsule as an external hard drive only and disable the wi-fi function ?

Yes.
1) Connect an Ethernet cable from one of the LAN <--> ports on your existing wireless router to the WAN "O" port on the Time Capsule
2) Go through the standard configuration suggested by the setup "wizard"
3) Then manually turn off the wireless function using AirPort Utility

MacBook Pro -- external hard drive corruption -- AND hanging computer?

Since purchasing a 17" MacBook Pro, I've had serious problems with directory corruption on three of my external firewire hard drives (80 and 100 G FireLite Pocket drives and a 400 G Lacie drive). About 2 weeks ago, the 80 G drive (with most of my critical files) disappeared from the desktop. Disk Utilities returned with a message that it was repairable. Tech Tools supposedly fixed it, but the drive icon shortly disappeared from the desktop. This time, Disk Utilities "repaired" it, but it was the kiss of death. After this, plugging in the drive caused the computer to hang indefinitely. I could no longer run any repair or data rescue software. Once this problem occurs, I can switch firewire cables and computers, and the computers still crash/hang. A techy at work managed to rescue the files and replace them on the disk (this required other hardware, a PC, and some software he downloaded(?)). Two weeks later, the problem happened again. However, this time, it was the 80 G and my 400 G backup drive. Now, all of my originals and backups (for the past 2 years, since I did my last CD/DVD backups) are (hopefully) temporarily unavailable. My 100 G drive started to do the same thing. However, I purchased and downloaded a copy of Disk Warrior, which seems to have rescued this disk.
I've had these drive for between 3 and 5 years, with little or absolutely no trouble. Then, after getting the MacBook Pro, I'm encountering really serious problems.
Is the MacBook Pro at fault? (I've returned to my PowerBook G4 until this issue is resolve).
What causes such severe disk directory damage that causes my computer to hang?
How can I recover my files (critically important to my work, some of which is on a tight deadline) without having to run to the vastly overworked/underpaid techy in my place of employment)?
My conversation with an Apple Tech was much less than satisfying. In fact, he seemed to portray a state of denial about the MacBook Pro having any problems, even though the web is full of complaints. What's up Apple? Are you beginning to backslide yet again?

Welcome To Discussions JeffBloom!
I'm sorry to hear that you are having problems with your MBP, but you have posted your inquiry, in the Discussions Forum, that is intended for discourse about the use of Apple Discussions.
You will get more focused attention to your issue, if you select a more appropriate location from this page Discussions Forum Home.
For example,
From the Forum Home Page, select the Category MacBook Pro.
Then choose an appropriate MBP Forum, such as Using your MacBook Pro.
On Forum pages, there is an option to Post New Topic.
Good Luck!
ali b

External hard drive unplugged and no longer recognized by my computer

The other day my external hard drive fell from my poorly made wobbly desk and was unplugged without being ejected. When I plugged it back in it didn't reappear on my desktop so I went into desk utilities where I could see it, I tried to verify it and repair it but I got these error codes:
2011-07-21 18:52:34 -0500: Disk Utility started.
2011-07-21 18:52:59 -0500: Verify and Repair volume “disk1s3”
Starting repair tool: 2011-07-21 18:52:59 -0500
2011-07-21 18:52:59 -0500: Checking Journaled HFS Plus volume.
2011-07-21 18:53:29 -0500: Invalid B-tree node size
2011-07-21 18:53:29 -0500: Volume check failed.
2011-07-21 18:53:29 -0500: Error: Filesystem verify or repair failed.2011-07-21 18:53:29 -0500:
2011-07-21 18:53:29 -0500: Disk Utility stopped repairing “disk1s3” because the following error was encountered:
Filesystem verify or repair failed.
2011-07-21 18:53:29 -0500:
2011-07-21 18:53:39 -0500: Verifying volume “disk1s3”
Starting verification tool: 2011-07-21 18:53:39 -0500
2011-07-21 18:53:45 -0500: Checking Journaled HFS Plus volume.
2011-07-21 18:54:15 -0500: Invalid B-tree node size
2011-07-21 18:54:15 -0500: Volume check failed.
2011-07-21 18:54:15 -0500: Error: Filesystem verify or repair failed.2011-07-21 18:54:15 -0500:
2011-07-21 18:54:15 -0500: Disk Utility stopped verifying “disk1s3” because the following error was encountered:
Filesystem verify or repair failed.
2011-07-21 18:54:15 -0500:
2011-07-21 18:54:53 -0500:           Name :           disk1s3
          Type :           Volume
          Disk Identifier :           disk1s3
          Mount Point :           Not mounted
          File System :           Mac OS Extended (Journaled)
          Connection Bus :           FireWire
          Device Tree :           /PCI0@0/PCIB@1E/FRWR@3/node@d04ba40b0627a7/sbp-2@c000/@0:3
          Writable :           Yes
          Capacity :           931.4 GB (1,000,070,627,328 Bytes)
          Owners Enabled :           No
          Can Turn Owners Off :           Yes
          Can Be Formatted :           Yes
          Bootable :           Yes
          Supports Journaling :           Yes
          Journaled :           No
          Disk Number :           1
          Partition Number :           3
My hard appears on the desktop of my other computer but has no files on it and still will not pop up and my macbook. How screwed am I?

See the pink box in #6 of Using Disk Utility.

External hard drive connected and running time machine backups but icon not showing up in finder

My external hard drive has been connected for a couple of years and is using time machine perfectly. i am trying to save my iphoto library on the external drive but the icon is not displayed in finder. Only time machine icon is displayed......thanks for your help!

Did you create a second partition for your iPhoto Library or did you just use the same single partition that TimeMachine is on?
Formatting & Partitioning a Hard Drive in OS X
Apple Tips: Using Disk Utility 3. Add a Partition

How to back up to external hard drive? and DVD?

I am having a terrible time trying to back up my iPhoto Library. About 1,000 photos, using about 1.6 GB of space. I want to back up to both DVD-R (4.7GB,16x speed).
When I go to iPhoto Help, it tells me I "can back up to DVD and/or external hard drive," but it doesn't tell me how.
I've tried going to the DVD by "Selecting All" in iPhoto, and then dragging to the DVD icon. Nothing really happens when I do that to show me copying progress, or something like that. When I do double-click the DVD, it shows icons taking up no memory. It also did not pick up all the photos, about a half dozen short. When I tried to "Burn," it failed. (I do have the combo-drive capable of burning DVDs.
Haven't tried to go to the external hard drive yet. What would be the correct process there?
What I need, I think, is the step-by-step instructions on how to do this.
Any help would be greatly appreciated.
Also, those blank icons that showed up on the DVD prior to my burn attempt seemed to indicate JPEG format. Is that the format I want? Is that the default in iPhoto?

The best way to back up is to use a utility such as DejaVu or any of the many, many alternatives that you can find on MacUpdate.
Essentially, to back up iPhoto you make a copy of the Library on the external Disk.
The most basic way to do this is to drag the Library from the Pictures Folder to the External.
You can back up to DVD in two ways: The Share -> Burn command will create a disk that is readable in iPhoto. Or you can simply drag the Library from the Pictures Folder to the DVD and burn it using the Finder.
Regards
TD

I just had my hard drive replaced and restored everything from a Time Machine external hard drive backup and now my "note" widgets won't load. Any ideas ?

I just had my hard drive replaced. I restored it using a Time Machine backup on an external hard drive. When I open Dashboard none of my "note" widgets will load. The other widgets open, such as weather, weather radar, calculater, dictionary, stock... Even the iPhoto Mini widget works, just not the notes ( Sticky Notes and K-Notes ). Any ideas on how to fix this ?

I did some research and found the solution to my problem. So I hope it's okay to answer my own question.
When you reinstall the OS, your Preferences go back to their default settings. Apparently Preferences is where this widget information is stored. This Preferences folder is located in the user Library folder which is hidden by default. You can access it using "one, or the other" of the following actions.
Action 1:      (1) In the Finder, choose Go > Go To Folder
                     (2) In the Go To Folder dialog, type ~/Library
                     (3) Click Go
                                                      -- OR --
Action 2:     Hold down the option (alt) key when using the Go menu. The Library folder is listed just                            below the Home folder.
After opening the Preferences folder, the file that you want to locate for k-notes is named
widget-com.rakoth.lichlord.widget.k-notes.plist
After you locate it make note of the byte size of the file. Now, with the Preferences folder still open, open Time Machine and go back in time until you see a big jump in the file size. That will be your uncorrupted plist. Restore it and close Time Machine.
Then Restart your computer.
After following this procedure I brought up Dashboard and my blank k-notes were now refilled with the previous text and color that occupied them before I had to restore the OS.
This procedure also worked for Sticky notes, which in the Preference folder are named
widget-com.apple.widget.stickies.plist

External Hard Drive worked and now doesn't work

I've got a Macbook Pro and a Seagate external USB hard drive. I had the hard drive attached and everything was going good until it became disconnected from the computer without being ejected. Now whenever I try to plug it in i get a message saying that the disk is unreadable to this computer, or something to that effect.
After searching around, some people have suggested to others in similar situations to use Disk Utilities to repair it. When I open Disk Utilities, the HD is listed in the sidebar, but it won't let me repair it, or mount it.
Any suggestions for getting the hard drive to work again? Thanks in advance!
Kyle

This may be of some help.
For Seagate drives, you can download the free SeaTools utilities from Seagate's website. Unfortunately I think they only run on a PC. However, you should be able to look at and test the drive with these utilities. I had a Seagate drive that somehow had it's partition info altered when I plugged it into an old laptop. I put the drive physically into a PC laptop and then used SeaTools on a boot CD to reset the drive back to its Native Drive capacity. Took it out and back to the Mac and then everything was visible again.

I have Lightroom 4. My external hard drive crashed and now my file is missing from the hard drive.In Lightroom, it has ? on the photos used. I've backed up the photos onto another hard drive and wanted to use it so I can work on my folder of images. Can s

How can I use my backup external hard drive to sync into Lightroom and still work on the same photos I was working on and get rid of the ?. The photos are on a folder so I need to someone sync the folder into Lightroom. Please help!

When I right click on an image, then went to Go to Folder in Library, it pulls up the new external hard drive where I made the new link. When I try to work on the photos, the image still says file image is offline or missing. When I right click on the image to Show in Finder, it says the image could not be used because the original file could not be found. I eventually did click on their locate and found the image. When I linked those two together, a few minutes later ALL the "?" went missing and now IT WORKS!!!!
That was weird!
Hope this helps someone else in my predicament.

HT203167 external hard drive died and have new one. how can i get my old purchases onto new hard drive?

help! my external hard drive died. have tons of tv shows and movies on it. how can i get my old purchases from itunes onto my new hard drive?

Just plug it in and sync it.
(60463)

Sharing an external hard drive - iMac and iPad

I currently have an external hard drive connected to an iMac. I also have an iPad. How can I share the hard drive between both and have access to it from the iPad. The hard drive is a Western Digital 2TB My book.

iPads are not computers. You can't just share a hard drive like that. It is, in some specific conditions, possible to plug a hard drive or a memory stick through the camera connection kit, but then again, files need to be media files supported by the ipad, and copied a specific way (/DCIM/8CHARSNAME.EXT)

Backup internal and external hard drives-TC and offsite

I now have Mavericks 10.9.3 on my iMac with a 2TB (1.25 TB used) internal hard drive.
I also have some external drives attached to my iMac with older iPhoto libraries and other files (total file sizes 940 GB and 505 GB). I primarily use Aperture now on my internal hard drive, but still access those iPhoto libraries on my external drives on occasion. I have Time Machine backup my iMac internal hard drive on my 2TB Time Capsule regularly.
My primary question is in regards to getting another copy onto a larger external drive that covers my internal and external drives so I can have a backup off-site. Online backup services seem to always exclude external drives. So a physical drive I can have offsite seems to be the best option.
A year ago I changed the destination of my Time Machine backup to be on a 3TB external drive (backed up iMac internal hard drive and the two externals). However, when I changed the destination of the backup back to the Time Capsule, the TM initiated a brand new backup (it did not recall that I had backed up prior to that on my Time Capsule).
I want to backup monthly, if not quarterly for my off-site storage. But, if every time I change the destination drive for TM, a new backup profile is created, it will overwork my drives unnecessarily.
Is there a backup program or a process on "disk utility" I could run parallel to TM that I just use quarterly capturing only the changes/additions in those few months for both the internal and external hard drives? Also, is there a way to add an external drive to my Time Capsule that is solely used to wirelessly backup the two externals on a regular basis (i.e. keep the internal 2TB drive backing up to the Time Capsule; and the external hard drive attached to Time Capsule via USB used as the backup drive for the external hard drives)?
Summary: I need to backup regularly to the local Time Capsule/additional external hard drive. The data will come from my internal hard drive and my two external hard drives. I also want to do quarterly backups of the additions/changes to all three drives to have on an offsite external drive that I manually backup to quarterly. Any help is greatly appreciated.

Carbon Copy Cloner is not on the App store.
Correct.. it is not approved because Apple do not like the fact that CCC (and most likely superduper) which are the most popular backup software for Mac because it makes a bootable clone. Apple will never approve of that. But let me assure you that is the genius of it. If the internal disk fails, you simply boot from the external. It is $40 but you can use on all the computers in your home.
CCC is a clone.. ie when it does the backup, any changes on the drive are changed on the clone. It does not work like Time Machine which simply piles up incrementals until the drive fills up. The idea of CCC is a backup of the drive as it exists at any point in time. TM btw is also not a reliable archive, ie it thins backups constantly.. so you should never rely on it to archive old versions.. but in the middle of a project it does a good job to keep various versions of your files. That is why I specifically said in my last post do not stop using it.
and you can keep using the TC just for the internal drive.
Keep TM running to the TC.. that will then keep a current hourly incremental of your drive. You can set CCC in a way which is a lot more flexible. ie backup just at the end of the day. There is no need for constant hourly backups. So to answer the second question.. you are still using your TC and TM.. but I suggest you only backup the internal drive.
Please read a bit from forum expert Pondini on the value of clones and TM.
http://pondini.org/TM/Clones.html
That's why many folks use both Time Machine and a bootable clone, to have two separate, independent backups, with the advantages of both. If one fails, the other remains.
Now the ports issue.
You can of course continue to use USB2. Just that moving large volumes around will be slow.. as doubtless you already know.
On your particular Mac since you missed out on USB3 which is a pain.. you can buy a Thunderbolt to USB3 adapter like the belkin.
http://www.belkin.com/au/p/P-F4U055/
I suggested the Thunderbolt to Esata (it is an older interface and the adapter is rather cheaper but I hear more reliable.. check reviews for both).
http://store.apple.com/au/product/H8875ZM/A/lacie-esata-hub-thunderbolt-series
Sata is the interface of the hard disk.. Esata just means external sata.. so it is native and without conversion.
I was merely suggesting ways to speed things up. But as long as you don't run CCC on more than daily basis then I think you will be fine just with USB 2. It will take a while on the day you do the swap over for the archive volume, but if you turn off the power saving in the Mac and leave it run overnight it should be able to do most of it.. you need to realise it will have to deep scan both the disks.. to compare files.. but CCC is based on Rsync and it is extremely fast and efficient. I am just not sure I know how long it will take to do. Anyway.. there is a plan.. tweak and adapt as you see fits your needs.

External Hard Drive beeps and freezes

Similar Messages

Maybe you are looking for