External hard drive buzzing

First of all, I'm sorry if this is in the wrong forum — this was the best I could find for it here.
I have a 500GB WD MyBook. It's worked fine up until now, and still is working fine, but it is making a loud obnoxious buzzing noise that sounds like an electric razor, almost.
The hard drive was plugged into a surge protecter, but NOT the battery backup side of it.
We had a power outage last night, and that is the only thing that has changed that could possibly be related to it recently.
The buzzing stops if I angle the drive or put it on its side (but only in one direction, strangely enough.
My questions are:
Is this a problem? Since it doesn't make noise on its side, should I just use it on its side from now on?
If it is something I should be worrying about, what should I do? Should I try to fix it? If so, what would be the best way of doing so?
Should I send it in to WD for repair/replacement (I think it's still under warranty, so cost shouldn't be much of an issue there.), or should I just get a new one?
Thanks in advance for your help/advice!

Actually, no I'm not. That has eSata, which I have no use for.
This one?
Message was edited by: joshz
EDIT AGAIN: Or maybe this one-it looks fairly well priced, and like what I need.
Message was edited by: joshz

Similar Messages

2nd destination folder for iTunes media appears in my external hard drive ?

I've been having trouble with my external hard drive that houses my iTunes media (33,000 songs).
I've solved that issue, but during the course of it, because the external was flitting in and out,
I believe the destination for media in iTunes preferences went from : /Volumes/iomega/iTunes Media to
simply "/Volumes/iomega"
Now I have a new external hard drive folder named "Music", and all activity in it is just from yesterday.
My guess is when all this was happening, I'd get the "do you want to organize your media" question from the advanced preferences.
One time I pushed "yes" and a lot of files started buzzing. I didn't want to wait for 33,000 songs so I stopped.
Am I right in guessing iTunes was reorganizing my stuff to the new folder "Music"? Less than 1,000 songs are in the file, and
those are no longer in the old "iTunes Media" file. There's really no consistency to what shifted...it might be a single
song shifted over while five others on the same album stayed behind. I can't just shift the folders back because it will replace
the original artist folder with the new one, which will lose a lot of songs. I tried manually to shift some back song by song and
it worked OK. But it would take forever to shift them back in that fashion.
Is there a way to get everything back in a single folder? If I do the "organize" thing thru iTunes and let it run, will it
eventually shift everything from my old "iTunes media" folder to the newer "Music" folder that appeared yesterday?
And will iTunes then recognize that as the active media folder and I'll redirect new media to that folder??

Here are the typical layouts for the iTunes folders (albeit Windows images):
Older versions of iTunes would put artist folder inside the media folder, newer versions inside <Media Folder>/Music. I'm guessing that your library was in the older layout, even if the main folder was called iTunes Media, instead of the new one. There is an option to move from the old layout to the new one. Moving from the new one back to the old one can be achieved by tweaking a hidden preference file in the media folder. There are however good reasons for preferring the newer layout when it comes to moving your library to a new drive or computer. Details in Make a split library portable.
Have I understood the issue? If you really want to force the old layout edit the file .iTunes Preferences.plist in your media folder and change the integer from 1 to 0 then turn the "Keep media folder organized" preference off, then back on again.
tt2

HELP: Sync Issues with External Hard Drive

Since I have moved all my music to an external hard drive I am having issues syncing. My Next Gen Ipod syncs, but never gets rid of the syncing notification. I have to disconnect it and restart it. Also, when it syncs it leaves two copies of the songs on my library, one copy has the explanation mark on it. Can anyone help me stop this?

R00KIE wrote:
I'd say bad power supply (if it has an external power supply).
Two external enclosures have done that to me already (but one is almost certain to do it while the other just started to do it recently), if the HD I have in the enclosure is a bit older (and noisier) I can even hear the HD spin down a little and spin up again, of course that whatever I was doing explodes in the process.
Mind you that the HD is confirmed to be working properly by connecting it inside a desktop pc.
I have couple other power adapters I can try. I got the same enclosure for my dad. I have a brick for a LaCie drive too. (I bought the lacie drive a year ago, but the power supply buzzed loudly. I put in a support request, but ended up returning the drive, and they sent me a new power after that)

Issues with external hard drive enclosure

I've been having these issues with my external hard drive since I got it, it seems to be the enclosure
These issues sometimes occur if the hard drive is off but plugged in
-boot will stall after post, before grub
-usb mouse won't work unless I unplug it and plug it back in
-dmesg gives errors about failure to enumerate device
-stalling at other points during boot (continues as soon as I unplug enclosure)
And today, both windows and linux stopped detecting it properly
dmesg said something about a read error.
Then it started working again as suddenly as it started, when I unplugged it and plugged it back in.
Does this sound like a deffective enclosure?

R00KIE wrote:
I'd say bad power supply (if it has an external power supply).
Two external enclosures have done that to me already (but one is almost certain to do it while the other just started to do it recently), if the HD I have in the enclosure is a bit older (and noisier) I can even hear the HD spin down a little and spin up again, of course that whatever I was doing explodes in the process.
Mind you that the HD is confirmed to be working properly by connecting it inside a desktop pc.
I have couple other power adapters I can try. I got the same enclosure for my dad. I have a brick for a LaCie drive too. (I bought the lacie drive a year ago, but the power supply buzzed loudly. I put in a support request, but ended up returning the drive, and they sent me a new power after that)

Iomega external hard drive either 'not found' by Time Machine or is now in 'read only' format

I don't know what's going on with my iomega external hard drive. Sometimes the HD is recognised by the computer; other times it isn't; if it isn't I can restore to an earlier back up via Time Machine app; but it's like the disk isn't writable.
Ten days ago, I had trouble backing up my iMac using Time Machine. After turning it off and restarting my external hard drive, it backed up successfully.
However, today I am trying to back up my files, and TM tells me it can't find the external hard drive. Nothing has changed -- I have been out of town this past week -- but somehow my HD now seems to be in 'read only' format. It does turn on, and I could restore my computer to an earlier back up.
"Mac OS X can't repair the disk. You can still open or copy files on the disk, but you can't save changes to files on the disk. Back up the disk and reformat it as soon as you can."
Annoyingly, despite my HD not showing in Finder or on my Desktop (as it usually does), when I simply turn it off I get that warning message "The disk was not ejected properly".
Have tried verifying and repairing using Disk Utility, to no avail.
Am prompted to reformat but I don't have a good understanding of what this means and how to do it. I'm guessing this would wipe the disk clean and I'd have to create the initial back up image all over again -- I'm reluctant to do this since this HD is my only back up and if it all goes tits up I'll be up that famous creek without a paddle.
Thoughts, suggestions, input all welcome and deeply appreciated -- thank you!

fzgy wrote:
"Mac OS X can't repair the disk. You can still open or copy files on the disk, but you can't save changes to files on the disk. Back up the disk and reformat it as soon as you can."
It's possible a heavy-duty 3rd-party disk repair app can fix it, but they're expensive (DiskWarrior is about $100), and there's no guarantee it can do it.
Am prompted to reformat but I don't have a good understanding of what this means and how to do it.
That will erase it. See Time Machine - Frequently Asked Question #5.
It sounds very much like the disk is beginning to fail, although it's possible there's a bad port, cable, connection or power supply (if it has its own).
I'd suggest getting a new one, and using it for your Time Machine backups; once you have a good backup there, reformat the old one (and select Security Options to write zeros to the whole drive -- if that fails, you know the drive is toast). Use it for secondary backups, per FAQ #27. If it has failed, get a second new one for secondary backups.

Back up using time machine and external hard drive

Hello,
I am having a difficult time deciding the best way to back up important documents.
I have:
1TB internal hard drive
3 TB external hard drive and
1TB external hard drive
I currently have about 1TB worth of data to be stored, but that will increase to about 1.5TB once I get a bunch of stuff off the HD camera's hard drive. I would like to keep my internal hard drive somewhat free to keep the computer running fast, but also want to make sure I am properly backed up.
Should I put ALL (or nearly all) of the files on the 3 TB external hard drive, and have time machine back that up and not worry about the rest? I'm a little weary about putting all of the files on one device even if it is backed up by TM.
If I do this, do I need to back up the 3 TB external drive in addition to using TM?
Thanks!

iMac11,2
OS X 10.6.8

How can I use one external hard drive for both Time Machine and iPhoto Library?

I have been using a 1 TG LaCie external hard drive for Time Machine backups. My (older) Mac has 160 GB and is almost full. I would like to move my iPhoto Library to the external hard drive, but I've heard Time Machine doesn't share one space well. Should I
1. create another partition (but will this erase what I've already saved) with Disk Utility? *I am running Snow Leopard*
2. create another volume to use for iPhoto, and if so, should the two volumes be of equal size?
3. leave it with one partition and move the iPhoto Library to the same partition with Time Machine back ups?
I know I don't need the entire 1 TG for back up of 160 GBs. Please advise the best path to take. Thank you!

You are getting incorrect information from your ASP. If you look at drive specifications the heat generated is no different for high vs low capacity drives.
I have upgraded the internal drive in my iMac 2007 with a 3TB Hitachi drive without any heat issues or other problems.
Larger hard drives have higher density platters so to access any given amount data the drives travel a shorter distance. Higher capacity drives should therefore run cooler than lower density drives because the drive spends less time spinning to access data.

I need to delete a lot of duplicates on iPhoto. I just bought my MacBook Pro and was so excited I downloaded my external hard drive without thinking through the process. I now realize I had my photos doubled up. So I actually have the same library twice.

Hello All!
I am so excited about my new computer and I didn't know that my external hard drive had so many pictures duplicated on it. So I downloaded the entire hard drive. I thought iPhoto was going to be my answer, and now after reading a lot of discussions, it seems I have royally screwed up. Please help me fix this problem. I am a computer novice. An even more Mac novice. I need very simple directions. I would just start over with iPhoto, but I downloaded my digital camera with brand new photos on iPhoto and also downloaded my digital camera software on my new MacBookPro. I am afraid if I "start over" with iPhoto I will lose my digital camera pictures. I bought the Mac to finally get my pictures straight, and look at the mess I have made. I had AVG PC cleanup and used that program last night to delete duplicates from my PC. I also used it to delete duplicates from my external hard drive. I omega. I know, I know, too late huh? But I am teachable. And I now have my external hard drive fixed. But now, my question to the community is how to fix my new Mac, and my iPhoto.
Thanks,

SweetThunder73 wrote:
When you say to remove the photos out of the iPhoto folder, then import the clean single copies, I am understanding that the "original" file that the decloner was run against is now the "clean" single copies?
Ok, you've got iPhoto Library that you have imported everything into, you can't delete the iPhoto Library and start over because you have only one copy of some pictures in there, combined with a lot of duplicates.
You want all the duplicates out, but it will take you ages to do it by hand.
What you do is.
1: Right click on the iPhoto Library and "Show Package Contents"
2: You will see a folder called Originals, these are all your original photo's, copy this folder to a external drive someplace, it's your backup.
3: Select the Originals folder again and from the Finder Menu > File > Duplicate.
4: Now you will have a OriginalsCopy folder, move that OriginalsCopy folder onto the desktop area out of the iPhoto Library folder. Close the iPhoto Library folder/window.
5: Download the Decloner software and install it, use it to find all the "real" duplicates, via it's content on the OriginalsCopy folder.
6: From the Finder menu > New Folder, now send the duplicate files to that folder, so all that is left in the OriginalsCopy folder is 1 copy of your pictures, minus all the duplicates which are now in New Folder.
7: Open iPhoto and remove all your pictures in there. The iPhoto Library will update to become empty.
8: Now import the pictures from the OriginalsCopy folder, these will now have only one copy of each picture.
9: Open your New Folder, from the Edit menu > Select All and
10 From the Finder > File Menu > Open With > Preview.
Now you have one copy in your iPhoto Library and the duplicates in a New Folder opened with Preview which you can compare to make sure.
Make as many backups of your pictures as you think you need during this prcess, but eventually you only want 1 picture of all you have in the iPhoto Library.
Some pictures may be the same thing but a little smaller etc., these obviously are not duplicates, and you can weed those out by hand in iPhoto.
Good Luck.

IPod cannot be synced because external hard drive could not be read

I moved my music folder to an external hard drive to create space on my laptop, and changed the location under Preferences / Advanced. Since I did this, my iPod trys to automatically sync but gives the error message "The iPoD "[name]" cannot be synced. The disk could not be read from or written to." The external hard drive is on and working. Is there some reason that the iPod will not sync with this external hard drive? What do I need to do to fix it? Thanks, Bill

First question, since you made
the change, can you still play your music from within
iTunes?
Patrick
Sorry for the delay in answering as I have been traveling. Yes, I can play music from iTunes. The music is located on my external hard drive. iTunes software is on my laptop, and the music library points to the music folder on my external hard drive.
Thanks, Bill
Dell Laptop Windows XP

My external hard drive is no longer recognized by my Mac

I have used Time Machine and a WD external hard drive to back up my computer for several years. Now, when I connect the hard drive, the drive lights up as though it's working, but the connection does not appear on my Mac -- the external hard drive is not listed in Device (in Finder). Any suggestions?

power feed issues and data appearance/disappearance are both symptoms of the SATA bridge card,..arguably the most failing modern computer component made.
throwing more power to the drive wont fix that.
SATA bridge card as found inside all USB HD devices which has an extremely high failure rate.
Inside a USB hard drive, containing the HD and SATA card
Countless 1000s of good external hard drives are thrown away each year because the owner thought the HD was bad when it fact it was the SATA bridge card which had failed. This card is removed in a matter of mere second once an external USB HD is cracked open from its plastic casing to reveal the bare HD and the attached SATA card which attaches between the HD and the USB cable.
quick and easy option is to crack open the WD USB drive, and remove the SATA card, and put the WD drive into a new enclosure ($20)
HOWEVER, if its an OLD WD drive, the SATA interface is permanently attached to the HD and the OP is "out of luck".

My WD external hard drive is no longer show up on my computer-it no longer recognizes it.

I have a WD external hard drive for sometime that I have been using to backup my computer and generally keep some of my bigger things on it(such as degital copies of movies). But suddenly one day my computer won't recognize my external hard drive when I went to plug it in. The light on it that is on when it is plugged in is on when I do plug it in, yet I can't actually find and acess my external hard drive. I don't know whats wrong and how to fix it so I can continue using my hard drive.

dead sata bridge card. very common problem.
see all about it here:
Your dead external hard drive is likely fine! Great hope for your 'faulty' external HD
verify HD on another Mac however, if same, dead SATA card most likely

Since last leopard update, i can no longer see my external hard drive

After last leopard update my external hard drive is no longer visible on the desktop, tried connecting to the laptop but this has also had the same update and the same problem, any ideas??

Open Disk Utility, select the External Hard Drives first icon in the list of Drives, click the Repair Disk button.
Dennis

I have moved all my songs onto a new external hard drive but it has wiped my iPod clean. Although when I connect my iPod it's starts teh process of sync'ing - so many songs in I get a pop up advising the siong could not be read or written to?

I have moved all my itunes onto a new external hard drive to free up space. It has wiped my ipod clean! I can still see the itunes on the new hard drive so I restored my iPod and tried to sync. Although when I connect my iPod it's in the process of syncing, so many songs in I get a pop up saying could not copy to my iPod as xyz song title could not be read or written. I click ok for this pop up to dissapear and then another pop up appears saying could not coyp to iPod because of unknown error.!!! Help I'm going crazy.

Did you go into iTunes to change the location of your media files? if not you will need to go into iTunes and click on preference and select the advance tab then click the iTunes Media folder location. Select the location of your on external hard drive.

PSE 8 - Archive on external hard drive including captions and tags

I started my above discussion some time ago with Mark and due to the lateness in my responding the case appears to have been closed. However I am hoping that someone can comment on my intended course of action, see below, based on his suggestions?
Just recapping having successfully migrated my Photoshop Album 2 catalog including captions across to PSE 8 and now my objective is to move my entire PSE 8 catalog to an external hard drive leaving only thumbnail view to remain. Obviously I am anxious to avoid any catastrophe and therefore would appreciate comment on the correctness of the steps involved. I have arrived at these by simply modifying Mark's original steps. Please correct where necessary.
1) Connect my external hard drive where I want to copy the files too. Make sure I can 'see' it in Explorer
2) Open Photoshop Elements 8; click the Organize button on the Welcome screen
3) Displayed in my welcome screen is my entire catalog with each album matching in title and file (photo) content to the folder title and file (photo) content in the folder location displayed to the left of screen.
4) Go to the File menu, and select 'Write Keyboard Tag and Propertise Info to Photo'. In my case most but not all files (photos only) will have tag and caption data. Rather than attempting to select the files that I wish to embed tag and caption metadata does Organiser have a global 'search and embed instruction' so that when it gets a 'match' on .jpg number it will embed automatically?
5) After completion, I go to the File menu, and select 'Copy/Move to Removable Disk...' click the MOVE button to move the files from their current location to my nominated external hard drive.
6) Click the Next button, and select the external drive in order to copy the files to the drive.
Can you confirm?
* On completion of the above steps my external hard drive will allow access to full resolution versions of the file from Photoshop Elements including any existing caption or tag data organised identically to my PSE 8 catalog (only one catalog)?
* Am I correct in assuming that also all original photos from my laptop will be removed and if not can be deleted given their existence on my external hard drive?
* Is the data which now resides on the external hard drive capable of being read on any other PC which may not have Elements software?
Neil

I have 2 laptops an aging Dell and new HP. I have successfully followed your
instruction and deleted 1 & 2 below on both.
The Dell PSE 8 now has:
C:\Program Files\Adobe\PSE 8 (240Mb)
C:\Program Files\Adobe\Elements Organizer 8.0 (502Mb)
C:\Program Files\Adobe\PhotoshopElements_8_WWEFDJ.EXE (1.17Gb)
C:\Program Files\Adobe\ PhotoshopElements_8_WWEFDJ.7Z (1.06Gb)
Giving a total of 2,972Gb
The HP PSE 8 has:
C:\Program Files\Adobe\PSE 8 (240Mb)
C:\Program Files\Adobe\Elements Organizer 8.0 (502Mb)
C:\Program Files\Adobe\PhotoshopElements_8_WWEFDJ.EXE (1.17Gb)
C:\Program Files\Adobe\ PhotoshopElements_8_WWEFDJ.7Z (1.06Gb)
But a total of 3,894 and I am unable to identify where the additional 1Gb
resides. In Documents & Settings\All Users\Application Data\Adobe\Elements
Organizer is 120Mb. I have attempted to delete this but lost the catalog in
the process so had to restore from the Recycle bin and it now appears to
have reconnected correctly. Frankly I can live with these large file sizes
but would like an opinion on their potential adverse impact at sometime in
the future.
I am not sure whether I need to start a new thread for "Are there any known
bugs in PSE 8 surrounding the burning of discs" I have attempted to burn
onto a new CD-RW my slideshow. The process of burning appeared to work but
the written to CD does not play on the DVD. I have also saved the slideshow
as a PDF. I can't recall exactly how but in selecting an incorrect option I
no longer have visibility of projects in 'Folder View'. The projects are a
single slideshow and PDF copy of the same. How do I regain visibility?
Neil

HP SimpleSave External Hard Drive - Can't Access Files, Says to Re-Format

I have had a SimpleSave External Hard Drive for over a year now, and have never had any problems with it.
Recently, I am unable to access my files on the hard drive when it is attached to my computer. It tries to load, and then gives me the error message "You need to format the disk in drive H: before you can use it. Do you want to format it?". I don't want to format it because I don't want to lose all of the files that I have stored. When I press "Cancel" i also get the error message "H:\ is not accessible. Data error (cyclic redundancy check).
I have not changed anything recently so I do not understand why it has all of a sudden stopped working.
I am using an HP notebook (G62 Notebook PC) and Windows 7 Home Premium operating system.
I am connected to the hard drive via USB. I have tried turning off my computer and turning it back on, and unplugging the drive. I have tried using other USB outlets.
My SimpleSave information: model no hp md1000h
P/N HPBAAD0010HBK-00
The blue light is still blinking on the front of the hard drive.
I would like to access my files and get the external hard drive working properly again. Please help!
Thanks in advance!

I too have the exact same problem on my HP SimpleSave (sd500a) external hard drive. I got through to WDC, and they apparently support these devices now. They asked me to send them a copy of my purchase receipt in order to extend my warranty in their system in order to help me (ridiculous!!). I sent the scanned copy of the receipt to [email protected], and got an auto-reply that they will get back to me within 1 day. I also went on their website, and they refer to the device in their system as 'ED Caviar Blue EIDE Hard Drive'. It has the same serial number as my product from HP, so I guess they have acquired these products or at least support of them (?). In any case, I'm freaking out because I have tons of family pictures, video and my entire iTunes library on the device. If any one is able to get help for this, please respond. I am desperate to get this resolved.

External hard drive buzzing

Similar Messages

Maybe you are looking for