External Hard Drive Died On Me...and my iTunes along with it....

My External hard drive recently died, and I had my "My Music" folder on it with all my music. However, since my "My Music" folder was on the ext. drive, which is now dead, I can't open iTunes in general on my computer. Here's what the error message says:
"The folder 'iTunes' cannot be found or created, and is required. The default location is for this folder inside the 'My Music' folder."
I've already tried redownloading. I've also gone through the run program and used the regedit to help reconnect it, but to no avail. Basically, I'm not looking to get back my iTunes music. At this point, I'm just looking to open up my iTunes so that I can start redownloading what I don't have.
Any suggestions? Thanks!

You should be able to work round this by pressing the shift key and holding it down while starting iTunes. You should be asked to choose or create a library.
If you have an iTune folder and library file on you c: drive, navigate there and choose iTunes library.itl. Otherwise choose create and pick somewhere conveinient for iTunes to create a new library, which will be empty.
The basic problem appears to be that your Windows registry thinks the My Music folder is on the nonexistant external drive. This Apple article covers setting the location of the My Music folder:
http://docs.info.apple.com/article.html?artnum=302398
Message was edited by: polydorus

Similar Messages

  • How to initialize older external hard drive to new computer and transfer itunes library

    How can i initialize an older external hard drive (maxtor one touch ii, without the original operating disc)  into my new computer operating mac osx 10.6.8 to transfer an itunes library?

    Just connect the drive, run Disk Utility, select the drive, and partition/erase it as required.
    By the way, this forum is intended for questions about old, pre-G3 hardware, and doesn't get much traffic. Hence it's not the forum where you'll be most likely to get help with problems involving more recent systems. There are specific forums for all PowerPC and Intel-based Macs as well as forums for each version of Mac OS X.
    Regards.

  • HT203167 external hard drive died and have new one. how can i get my old purchases onto new hard drive?

    help! my external hard drive died. have tons of tv shows and movies on it. how can i get my old purchases from itunes onto my new hard drive?

    Just plug it in and sync it.
    (60463)

  • External Hard drive Died - Best way to restore library

    The External Hard drive where I stored all my iTunes files has died and I am unable to retrieve any files. Every thing is on my iPod whats the best way of geting the library & playlists back into iTunes?

    Install software such as Paragon NTFS. Regardless of the method you use, back the data up; that drive may fail at any time.
    (120806)

  • My aperture library lives on an external hard drive that is corrupt and I can not locate the library. I do have it backed up with TM. How do I safely restore the library from TM to my laptop? I am using the newest version of aperture on my macbook pr

    My aperture library lives on an external hard drive that is corrupt and I can not locate the library. I do have it backed up with TM. How do I safely restore the library from TM to my laptop? I am using the newest version of aperture on my macbook pro.

    Hello Sandra,
    The article linked below details how to go about restoring items from Time Machine in Snow Leopard.
    Mac OS X 10.6: Recovering items using Time Machine and Spotlight
    http://support.apple.com/kb/PH6379
    Sincerely,
    Allen

  • One Format External Hard Drive for Your Mac and PC...

    I have Formatted my External HD Passport 500GB = (465.8) and split it in two partition Mac OS Extended (Journal = 232GB) and FAT32 (Ms-Dos-FAT = 232GB) and reformat to NTFS using Windows...
    How to use one External HUD for your Mac and PC you have a PC and how to have two Partition in Mac OS Extended (Journal) and FAT (Ms-Dos-FAT)as you desire the size of your partition under application, Utilities and Disk Utility and covert the (FAT32) to (NTFS)using Windows Control Panel or just search by Start, search Computer Management or just right my Computer and format the second partition to (NTFS)
    Tips for Mac OS Extended (Journaled) FAT32 vs NTFS, what works and don't work...
    (1)Mac OS Extended (Journaled) Partition can't be use in Windows to transfer files but NTFS Partition can be use in Mac by transferring file from Windows to Mac and NTFS support for files over 4G in size...
    (2)FAT32 can be use in Mac and Windows but with a limitation that a file cannot be transferred to a FAT32 partition if the file is larger than 4GB such as a video file and FAT32 file system performs more slowly than NTFS...
    (2)Mac OS Extended (Journaled) can be use in Windows when you Reformat your HD to HFS+ by third-party app such as http://www.macdrive.com/ MacDrive for $50.or http://www.paragon-software.com/home/ntfs-mac/ NTFS For Mac 6.0 for $30...
    Reference link 1 External Hard Drive for Your Mac and PC...
    http://www.myfirstmac.com/index.php/mac/articles/1-external-hard-drive-for-your- mac-and-pc
    Best regards...
    JamesUFOs...
    http://www.youtube.com/user/JamesEBEs

    I have many external drives I use between my MacBook Pro and my Windows PC's. I use a free NTFS driver for Mac OS-X to give me full read/write access to any NTFS formatted partitions when running Mac OS. I also use MediaFour's MacDrive v8 on some of my Windows PC's to access any HFS+ formatted partitions.
    Most of my drives are formatted NTFS because I have more Windows machines than I have MacDrive licenses, and with the driver for Mac OS, they are fully accessible. I have a few drives I do keep formatted as HFS+ because I have encountered an app or two that don't work quite right when they don't get to write to files on an HFS+ partition (one of my backup programs is picky about this).
    As said before, FAT32 is fully accessible between the two OS'es but it also has it's own limitations.

  • HT1391 I had all of my music on an external hard drive that failed. I have iTunes Match so all of my music was synced with the "cloud". How do I now download and save all of my music back down on a new external hard drive?

    I had all of my music on an external hard drive that crashed. I have iTunes Match so all of my music was synced in the cloud. How do I now re-load my music back down onto a new external hard drive?

    Hey Rbe58!
    I believe this question can be answered by the information in the following article:
    iTunes 11 for Windows: Access all your music anytime, anywhere with iTunes Match
    http://support.apple.com/kb/ph12492
    Play or download songs from iCloud
    You can play songs directly from iCloud, or you can download songs so you can play them when you’re not connected to the Internet.
    If a song is available in iCloud, it has a Download button next to it.
    To play the song, double-click it.
    To download the song, click the Download button.
    After you download a song to a computer, it remains in the computer’s iTunes library, even if you turn off iTunes Match.
    To only display downloaded songs in your iTunes library, choose View > Hide Music in the Cloud. This also hides any previous iTunes Store purchases you haven’t downloaded.
    For information about downloading and playing songs on an iOS device, see the documentation for the device.
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • In disk utility, it shows that my external hard drive is somehow unmounted and I can't access it in finder or repair it in Disk Utility. How can I get this working without losing my important data?

    In disk utility, it shows that my external hard drive is somehow unmounted and I can't access it in finder or repair it in Disk Utility. How can I get this working without losing my important data?
    Thank you!

    When you erased the disk did you select Mac OS Extended Journaled as the format option?

  • HT201250 How do you add an external Hard drive to time machine and share on network?

    How do you add an external Hard drive to time capsule and share it on local network?
    Lee

    Ensure it's formatted as Mac OS Extended, FAT16, or FAT32, connect it to a self-powered hub, and plug it into the Time Capsule's USB port. If the drive is Ethernet and not USB, ignore everything else and just plug it in.
    (71787)

  • My hard drive died last week, and I needed to install a new one.  Previously, I was able to save a .doc with text and inserted photo to .pdf and then to .jpg.  Now I can get the .pdf but can't determine what to do to convert to .jpg.  Does anyone know ?

    My hard drive died last week, and I needed to install a new one.  Previously, I was able to save a .doc with text and inserted photo to .pdf and then to .jpg.  Now I can get the .pdf but can't determine what to do to convert to .jpg.  Does anyone know ?

    Rather than do that, which means starting over from scratch, losing all your edits, organisation and so on, why not simply use iPhoto Library Manager to revert the Library to the older version? Easier, less destructive.
    The instructions on that are here
    If you really want to start over: you can access the Originals folder simply by going to your Pictures Folder and finding the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.

  • I have moved old Back Up files from my external hard drive to the trash and as the Trash previews the files, i.e. counts them (over 850,000 files) it then begins to delete but then stops. Is it possible to move the files out of the Trash file and then onl

    I have moved old Back Up files from my external hard drive to the trash and as the Trash previews the files, i.e. counts them (over 850,000 files) it then begins to delete but then stops. Is it possible to move the files out of the Trash file and then only delete a small amount at one time?

    See
    Deleting backups via the Finder on Lion 10.7.x or later:
    http://pondini.org/TM/12.html
    Hold option (alt) while emptying the Trash.
    See also
    http://pondini.org/TM/E6.html
    Message was edited by: WZZZ

  • External hard drive becomes "read only" and won't let Time Machine back up

    I have an external hard drive for back up, and it has been working fine until recently.
    There is a version of 10.6.6 loaded on it also.
    The back up will fail every few days. When I do some checking, the back up drive is "read only" but I am not able to switch it to read/write. I cannot repair it with Disk Utility as the repair buttons are grayed out.
    I can run DiskWarrior and it will fix it, but it runs super slow and takes all the memory to do it. I can barely use my e mail while it's running.
    Anyone know what's going on?

    System log says:
    3/27/11 8:01:19 AM com.apple.backupd-auto[1559] Not starting scheduled Time Machine backup - time machine destination not resolvable.
    It's read only because:
    A: I cannot do repairs under Disk Utility, the buttons are grayed out.
    B: I right click and "Get Info" and if I click on the lock icon, nothing happens.
    C: The disk is not listed in the Time Machine backups.
    I will try to take better notes the next time it happens and give you the exact messages.
    There is another drive daisy chained to this external drive which holds my music. The music drive does not have a Mac OS installed on it and is only for storage. It works properly.

  • My external hard drive will not open and only shows up in Disk Utilities. When I try yo repair it, it give me and error of invalid sibling link. How do I fix my external hard drive?

    My external hard drive will not open and only shows up in Disk Utilities. When I try yo repair it, it give me and error of invalid sibling link. How do I fix my external hard drive?

    Invalid sibling link may not be fixable by Disk Utility. (Disk Utility is very conservative, and will not attempt repairs that might cause you to lose data.)
    It is an indication of serious Directory damage.
    that leaves
    a) third-party Utilities that will take those risks, or
    b) re-initializing the drive (which deletes all your data) and restoring from another backup source.
    c) "Copying off whatever files you can salvage" has gone by, and you cannot copy anything off a drive that will not mount. You may be able to use "rescue" programs such as prosoft engineering Data Rescue to copy files to another drive, but that sounds a lot better than its reality. You may get many files, but not get ANY filenames.

  • How do i watch movies from an external hard drive on my macbook and iPad?

    how can i watch movies on my macbook and ipad from an external hard drive?

    Import it into an iTunes library and then sync the iPod with that library. If desired, create a new library on that drive by launching iTunes with the Shift(Windows) or Option(Mac OS X) key held down.
    (81946)

  • HT1329 My large iTunes library is on an external hard drive. Can I set up iTunes on my new Macbook Pro and copy the library to it or are there any pitfalls?

    I have my large iTunes library on an external hard drive. Can I set up ITunes on my new Macbook Pro and transfer/copy this library to the internal hard drive or are there any problems I should be aware of?

    ITs an old Iomega 100gb external HD that has about 90gb of music on it. The Macbook has a 500gb HD. I would like to put the iTunes library on the internal HD so I have room to expand.
    Phil0124 wrote:
    You can copy it to the internal hard drive as long as it fits on it. How big is your library, and how big is your internal HD?
    The only thing you do not want to do is over-stuff the internal hard drive. The OS needs some space to operate correctly, so if your iTunes library uses up more than say 80 to 85% of the internal HD's available space it may not be a good idea to transfer it over.
    With that said, the internal HD will provide slightly faster access to the library than the external would, but other than that, you can point iTunes to the external drive just fine.

  • HT3275 My Time Capsule has been backing up without any problems and all of a sudden it stops reading on my computer. The external hard drive beeps three times and the motter wont run within. What happened?

    My Time Capsule has been backing up without any problems and all of a sudden it stops reading on my computer. The external hard drive beeps three times and the motter wont run within. The light that usually blinks while in use is no longer blinking and is on constant. What happened?

    abailey46 wrote:
    My Time Capsule has been backing up without any problems and all of a sudden it stops reading on my computer. The external hard drive beeps three times and the motter wont run within. The light that usually blinks while in use is no longer blinking and is on constant. What happened?
    Sorry we are unclear as to the external hard drive and its connection to the TC..
    For instance the light that blinks.. is that the TC or external hard disk or what.
    Did you try just rebooting / restart the whole network in correct order.. modem.. router / TC.. external drive.. clients with 2min gap between each.
    Are you actually running Snow Leopard as the profile states?
    How old is the TC?

Maybe you are looking for

  • Windows Media Player 11 Locks Up Zen Vision:M - Possible

    This may be of help to someone out there. My Problem:After installing WMP I could not browse my ZVM through Windows Explorer, Sync via WMP or Sync via Creative Sync. Basically everything was screwed up. My Fix:. Backup your entire collection of media

  • Oracle 9i - Database closed while normal use

    Hi all, I have big problem with my 9i database. One of my sid get closed (sort of shutdown) while we're using it. I have no trace in alert, and no trace dumped. I don't what to do ? I have tried new allocation of space memory... Dont' work. It shutdo

  • How to tokenize the unicode text into single word stream ?

    i am a newer to java, trying a toy program e.g a% #unicode --> a unicode ansi txt successeed but unicode txt parse result �F a u n i c o u d e how can i parse the unicode txt into single word by streamTokenizer? thanks! import java.io.*; //import jav

  • NullReferenceException on GetSchemaTable() for query with cursor column

    Hi, I'm using Oracle.DataAccess.dll v 2.111.6.20 to run queries and read data using OracleDataReader directly. When I execute a query that returns cursors in one of its columns, e.g. select cursor(select 1 from dual) from dual and then call OracleDat

  • Dreamweaver Studio 8 on MacBook Pro

    Hello, I just bought a new Intel Based Mac and a brand spanking new, $1000 copy of Studio 8 but when I try to run Dreamweaver I get a pop up box that says: 65016 Nothing more. Fireworks from the package runs just fine. What's going on? Did I just blo