External hard drive disappears when imac wakes up after sleep

Hi Everyone.
Got a really silly question but I can't seem to figure out where to fix this
I have 4 USB 500gig hard drives all run off a 13 port powered hub.
Now I have one hard drive set aside for my films which I and ripping so they can be view via my apple tv 2nd gen. The other is for MP3's and the other 2 get are redundunt at the moment.
No the problem is when I rip a DVD, I rip it to the hard drive on the iMac and then trans the files to the external drive.  As I rip them at a high quality (2 to 3 gigs per film) I get the transfer box saying it will take X amount of time.  The only thing is the iMac after some minutes will go to sleep.
When you wake it up the hard drives have disappeared and the is an error saying the drive have been ejected incorrectly.
I'm assuming the iMc is putting the drives to sleep when it goes to sleep.
Is there a way to keep the hard drives running but only put the momitor to sleep.  The problem is also happening when I use USB memory sticks (I have a 4/8/16 & 32gig sticks all with various bits of info that I am sorting out from the move from Windows PC to Mac.
Can anyone point me in the right direction to get this fix coz I can't seem to find the setting
Thanks
Rick

When you are doing this, set the drive to never sleep, slider completely to the right and display sleep to something like five minutes. Or just hit Control-Shift-Eject, to sleep the display. Uncheck "put the hard disks to sleep..." That said, the firmware on the externals may be spinning them down. But this shouldn't be happening if they are being written to.
System Preferences> Energy Saver.

Similar Messages

  • Why have my TV shows on my external hard drive disappeared when I've deleted them from my iTunes library?

    I am trying to free up space on my internal hard drive (MacBook Air).  I copied my iTunes TV shows onto an external hard drive, following all instructions carefully.  They were all there on the external drive - I opened a few and they played perfectly.  I then went back into iTunes and deleted the shows, then emptied trash.  When I went back into my external hard drive, all the TV shows had disappeared!  Am now in process (yawn) of downloading the shows again onto my laptop, rather defeating my object of freeing up space.  Can anyone tell me what I have done wrong?

    Hello Janeburows,
    You might have setup your iTunes in such a way that you store your Media files on your External Hard Drive and if that is the situation then whenever you delete anything permanently from your iTunes on your Computer when the External Drive is connected then the Content will get deleted from your External Hard Drive. To verify the Location for the Media files which you have on iTunes do the following.
    Open iTunes > Preferences> Advanced and you will see it under iTunes Media Folder Location
    http://support.apple.com/kb/ht1391

  • I replaced my hard drive and I backed up my files on an external hard drive but when I reloaded my iweb to my imac none of my files were on it so I can't make changes to my Published web site have I lost my files what can I do

    I replaced my hard drive and I backed up my files on an external hard drive but when I reloaded my iweb to my imac none of my files were on it so I can't make changes to my Published web site have I lost my files what can I do

    By default iWeb keeps its data in (user)/Library/Application Support/iWeb in a file named Domain. Without this file you cannot proceed (other than by recreating the site from scratch using the published version as a reference) so you need to locate it on the original disk.
    To confuse matters, Apple have hidden the user’s Library folder in Lion and Mountain Lion to casual viewers, in an attempt to stop new Mac users messing their machines up. To access it, in the Finder go to the ‘Go’ menu and hold down the Option (Alt) key; the Library folder will appear as a choice.

  • Why will iMac OS 10.6.8 intel core duo not write to SeaGate Goflex FreeAgent external hard drives? - when it used to!?

    2 TB external hard drives (SeaGate GoFlex Free Agent) were formatted in NFTS to store movies over 4 GB so that I can transfer to PC's.  I downloaded camcorder movies in .mts files to this iMac and later transferred to my external hard drives.  I am now trying to transfer the quicktimemovie files that iMovie  made to the external hard drives and the iMac refuses to write ANYTHING to my EHD's.  But it used to just fine.  Now it says it can only read the EHD's?!  I really think the OS has been 10.6.8 all this time so why the sudden inability to write to my EHD's?
    iMac has VMFusionware, perhaps it will write to EHD's when this is going?
    I'm pretty sure I already have all the raw data (the .mts files) but I can't tell if they are the same as the quicktimemovie files.  So I think I can just trash the QTM files and remake them at some later date by uploading the .mts files to iMovie.  Is that right?
    A friend was able to copy some of the QTM files to a thumb drive...

    Spaced out and forgot to mention that these EHD's continue to work fine with a G5 PowerPC Mac maxed out at OS 10.5.8.  The G5 doesn't have a good iMovie so that's why I was using the iMac with OS 10.6.8.  The G5 writes to these EHD's no problem.
    I'm wondering if the EHD's came with some software (I've googled around and Paragon sounds somewhat familiar) that I put on the Mac's that enable writing and I have forgotten about.
    [edit] I remember there was some piece of paper talking about initial formatting of these 2 TB, USB 3.0 drives (STAC2000103).  I don't know where it is.  I have the box and it states "NTFS driver for Mac (R) pre-loaded on drive"...er, that means they should work with any Mac?...wait, do I have to seek it out and run it to get it to work?

  • Internal & external hard drives disappeared in Finder

    It happened yesterday on my G5 running 10.4.6. I have 2 hard drives inside my G5 and one external hard drive connected with firewire 800. The second hard drive and the external hard drive disappeared in Finder. But the one that has the system on it is fine. They did show up in Disk Utility. But it said they are both "not mounted".
    When I tried to repair them in disk utility, it said:
    "Checking HFS Plus volume.
    Invalid B-tree node size
    Volume check failed.
    Error: The underlying task reported failure on exit
    1 HFS volume checked
    1 volume could not be repaired because of an error"
    Does anyone know how to fix it? I have lots of stuff in those hard drives.
    Thanks
    Ti Powerbook G4 1Ghz, PowerMac G5 Dual-Core 2.3   Mac OS X (10.4.6)  

    Sounds like you have a major problem that Disk Utility cannot fix. This has happened before to other users. I suggest you get a copy of DiskWarrior and that will probably fix it. You can read about/buy it here:
    Alsoft DiskWarrior
    Mulder

  • How to save iPhoto library (currently on partition of external hard drive) on to iMac's internal hard drive

    I have my photos stored on an external hard drive (Maxtor). The external hard drive has been split into two partitions, with the photos in one and the rest in another. This was because my (very) old Mac did not have space in its internal hard drive and I set it up so that the photos were only saved on to the external drive.
    Now I have a new iMac (with OS x 10.8.2 Mountain Lion) with more space, I'd like to save the photos on the internal drive and back them up on the external drive. 
    I have tried various things such as  saving the iphoto library on the desktop and then dragging and dropping it into the iPhoto icon, holding down the Option key. None of this has worked and I only have 'fingernail' copies of the photos - the 'volumes' only appear to be on the external hard drive. When the external drive is not connected it says that the volumes cannot be found.
    I have tried saving a new version of the iphoto library with a different name and directing the computer to that but that did not work. Perhaps it is an issue with the volume, or the library the computer/iphoto is selecting?
    Am not sure what to do next. Do I somehow need to set up my external hard drive differently as it still seems to be configured to only save photos on there, or save iphoto library in a different place?  Any help would be much appreciated.

    I have tried various things such as  saving the iphoto library on the desktop and then dragging and dropping it into the iPhoto icon,
    Never do this - this imports one iPhoto library into the new one which does not work and creates a massive mess
    holding down the Option key.
    If you depress the option key and launch iPhoto you get a select library window - you use this to select a different iPhoto library or if you have moved the existing iPhoto library to select its new location
    When the external drive is not connected it says that the volumes cannot be found.
    This is a symptom of a referenced library which is strongly not recommended - in the iPhoto preferences is the preference to "copy imported items to the iPhoto library" checked (default) or have you unchecked it?
    I have tried saving a new version of the iphoto library with a different name and directing the computer to that but that did not work.
    What does not work about this?
    the way to move an iPhoto library is to simp;y drag it intact as a single entity to the new location and to depress the option key, launch iPhoto and select the new location
    However if you have a referenced library then you need to post back for more information
    LN

  • Time Machine Backup of external hard drive connected to IMAC

    I have an external hard drive connected to my IMAC. I also have a 2TB Time Capsule connected to my network. I store all of my video (both events and projects from imovie) to the external hard drive to save space on the IMAC. Does the Time Capsule backup this external hard drive? When I open Time Machine I don't see where the external hard drive is backed up? The drive is formatted MAC OS extended (journaled).

    nujac,
    Time Machine backs up all locally attached drives unless you specifically exclude them in System Prefenences > Time Machine > Options.. icon.
    You should be able to see this in Finder, enter TM and highlight the external drive. Click back to a prior date. Sometimes it takes a little while to fully populate the display since it's reading across the network, give it a few minutes.
    Regards,
    Captfred

  • I connected my external hard drive to my new imac to put all of the information from my macbook onto it. i have been working on the macbook now and want to reconnect the external hard drive so my imac is updated with the work. How is that done?

    I connected my external hard drive to my new imac to put all of the information from my macbook onto it. I have been working on the macbook now and want to reconnect the external hard drive so my imac is updated with the work. How is that done? or is it possible?

    As I said, I don't use Time Machine, so it'd be best to wait for an "expert" answer, but, with my very limited knowledge, I'd say: probably not - so, for now, I'd suggest you read up on Time Machine:
    http://web.me.com/pondini/Time_Machine/Home.html
    http://support.apple.com/kb/index?page=search&src=support_site.home.search&local e=en_US&q=time%20machine
    And, you might be attracting more knowledgeable answers if you were to post this question in the Time Machine Forum (part of the Snow Leopard forums).

  • I am trying to restore my old Macbook Pro data using Time Machine on a new Mackbook Air from external hard drive, but when I install I get two different loggin accounts and I only want one loggin account

    I am trying to restore my old Macbook Pro data using Time Machine to a new Macbook Air from an external hard drive, but when I restore I get two diferrent loggin accounts and I only wnat one loggin account to access all my data/files?

    This web site might answer all of your Time machine questions:
    http://pondini.org/OSX/Home.html
    Ciao.

  • My hard drive crashed on my MacBook Pro crashed and I need to get my CS5 up and running on the new hard drive. I copied what I could onto an external hard drive but when I drag and drop I get directions to uninstall but the uninstall folder I have does sa

    my hard drive crashed on my MacBook Pro crashed and I need to get my CS5 up and running on the new hard drive. I copied what I could onto an external hard drive but when I drag and drop I get directions to uninstall but the uninstall folder I have does says it is an alias that is no longer present. I get error 6. I would like to get my software up and running on the laptop again please

    If you subscribed to iTunes match the songs are kept in icloud. If you didn't but you did save the actual iTunes library folder which should include the music, video, etc.  you should be able to just drag this file back to your machine in the same place and when you open iTunes it will give you a chance to identify the iTunes library folder. 
    You can test this to find out if you saved the media files or not and don't need to attach your nano to do it. 
    You are correct that once you connect the nano it will clear the existing files from it and sync it with the new iTunes library. 
    If you don't have the media files i'm not sure if/how to get them back on a windows ipod.  I have everything backed up regularly because of the horror stories I have seen & heard.

  • A library on my hard drive became corrupted, so I over-wrote it from an external hard drive.  When I access the library now on my hard drive, many of the images are vertical, and cannot be rotated other than one at a time.  Ideas to correct this?

    A library on my hard drive became corrupted, so I over-wrote it from an external hard drive.  When I now access the library on my hard drive, many of the images are vertical, and cannot be rotated other than one at a time.  Ideas to correct this?

    You had already done "Repair" and "Rebuild"?  These usually takes scores of minutes or hours.
    Does the Library on your external drive work from the external drive?  Navigate to it in Finder and double-click the name.
    If it does, delete the problem Library, empty the System Trash, reboot, Verify your system disk using Disk Utility (and might as well repair permissions while you're at it), reboot, test the external drive Library once more to confirm it works properly, then close it and copy the Library to your system drive.  When the copying is done, double-click the Library (now on the system drive) and see what you get.

  • How do i recover data from an external hard drive that was accidentally deleted?  After I verified the drive, a message appeared that said my drive needed to be repaired.  When I tried to access the drive again, the 700 Gigs of music is gone!

    How do i recover data from an external hard drive that was accidentally deleted?  After I verified the drive, a message appeared that said my drive needed to be repaired.  When I tried to access the drive again, the 700 Gigs of music is gone!

    Stop using the drive immediately, un plug it.
    Buy a copy of ProSoft DataRescue 4 and use it to search for deleted files.

  • I recently restored my laptop and also iTunes from an external hard drive, but when I play songs, it says the original file could not be found. How do I locate and fix this?

    I recently restored my laptop with Windows 7 and imported my iTunes library from my external hard drive. When I try to play songs, it says it cannot and that the original file could not be located. How do I fix this?

    Put the files back where iTunes expects them to be.

  • Hi, I have a hard disk failure so to recover my data I am using disk utility to restore the data on an external drive while booting from a second external hard drive. When I perform the operation it gives me an input/output error and stops. Any tips?

    Hi, I have a hard disk failure so to recover my data I am using disk utility to restore the data on an external drive while booting from a second external hard drive. When I perform the operation and after having selected both my destination and source drives, the operation begins but soon fails due to input/output error. If I try to create an image of the drive it gives me the same error message. Any help would be much appreciated.

    Disk Utility only creates a image of the drive, so it's no help getting exactly what you want, which is your files. If the file structure is messed up or the drive is failing then it's no help.
    If you have a external boot drive and you can't access the internal non-booting drive though the typical Finder and windows to transfer your files via drag and drop methods, then you need to install Data Rescue on the external boot drive and it will do as best as it can to recover your files. (works on non-encrypted/non-Filevaulted drives only)
    .Create a data recovery/undelete external boot drive
    Are you sure you have hard drive failure, or that OS X isn't merely not booting?
    Because if the drive is working physically, then there is a host of fixes
    ..Step by Step to fix your Mac
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/

  • I want to move my music and photos to an external hard drive from my iMac. What external hard drive should I get?

    I want to move my music and photos to an external hard drive from my iMac.  What kind of hard drive should I get?  Will it remove it from iMac and only be on external hard drive?

    How to correctly move your media:
    iTunes: How to move the library to an EHD
    iPhoto: How to move the Library to an EHD
    It is important that the External Hard Drive is formatted as Mac OS Extended (journaled).
    And also make sure that all is working to your Satisfaction before Deleting anything Off your Mac.

Maybe you are looking for

  • Is there a way to make labview messages always appear on top of all windows?

    I have a main VI running and a user selects a non-Labview window to work on. Is there a way make the user prompt or user input express VI messages appear on top of all windows? I have experimented with the "make window always on top.vi" from the NI w

  • Battery Degrading

    My MBP is now around 1 year and a half old. The battery that came with it degraded surprisingly fast. so that i couldn't get more than an hour if I was lucky. I started noticing the degradation around 5 months ago I think, maybe 6. I waited to get a

  • How to design and use tabstrip in webdynpro

    hi,      i trying to design tabstrip in webdynpro(SE80), i dont know how to design and use it. if u have screenshot or any other document give me. its pretty useful for my requirment. guide me

  • BPM Alerts Method/Function Module

    Hi, Which MTE Method sends SMS for BPM? I want to change the SMS content. If I can know the Method name, I can edit the function module. If any further infromation is required please let me know. Points gauranteed. Please help. --Ragu

  • Address Book problems on iMac & Desktop & Palmtop - **Please Help**

    I had the sync working fine yesterday: Mark/space with Tunsgsten T/X Everything working fine and what folloewed only occured with address book. My palmtop address books synched with the desktop - which then synched with iMac and all was sweet. Then I