External Hard Drive Disk Utility Can't Repair the Disk

Hi,
I have a Seagate 1 TB Backup Plus Drive which was working perfectly fine until I plugged it into a USB hub. It detected it while in the hub and I was able to get files off of it, but when I ejected it from the hub and put it back into the USB slot on the computer it was not detected by finder. It shows up in the disk utility and I clicked verify and repair and it says:
Verify and Repair volume “Seagate Backup Plus Drive”
Checking file system
Volume repair complete.
Updating boot support partitions for the volume as required.
Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
Is there any way to get this to work properly again? Or if not is there a way for me to recover my files on the external hard drive?
Thanks
I have a Macbook PRO late 2011 running OS X Mavericks.

Use a more powerful utility such as DiskWarrior, or a product such as those listed here.
(108710)

Similar Messages

  • Problem with "Prohibited name". Disk Utility can't repair the disk!

    Hello,
    Sorry if my english is not perfect, but I do my best!
    I have a problem with almost all applications. When I quit an application, it appear the crashed window. I can submit to Apple support the report, but I don't because there is too much.
    I start on a cd-rom and lauch Disk utility. It can't repair the disk because of two "prohibited name" lines in red. No more information!
    What are the two "prohibited name"? File? Folder?
    How to repair the disk?
    Any idea?
    Please, help me.
    Thank.

    Bienvenue To  Discussions GMDC!
    Exactly which model Mac G5 is it?
    What size is the Hard Drive, and how much space is available?
    How much RAM is installed, and is it original or added?
    What peripherals do you have connected? A keyboard, mouse, printer, external drive or modem, router, etc?
    What happened between the last time the Mac functioned successfully, and when it didn't?
    Have you made any changes, like upgrading the system, updated or installed any applications or programs, etc?
    Have there been any unusual occurences, like freezes, crashes, power outages, etc?
    See if you are able to perform the procedures posted below, and post the results.
    THESE ARE THE STEPS FOR USING DISK UTILITY TO REPAIR YOUR HD
    1.Insert the System Install disk, Mac OS X CD-ROM disk, or Restore DVD disk, then restart the computer while holding the C key. Use the System disk, of the OS, that is currently installed.
    2.Once started up from CD or DVD, on the Menubar at the top of the screen, choose Disk Utility from the Installer contextual menu for Panther, or Utilities for Tiger.
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from disc to access Disk Utility.
    3.Click the First Aid tab.
    4.Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    5.Select your Mac OS X volume, if necessary.
    6.Click Repair. If DU reports errors it has fixed, re-run Repair Disk until no errors are reported.
    7.Repeat steps 5 & 6, but select the Hard Drive this time. It's usually the first listed with the manufacturer's model number. Make note of the S.M.A.R.T. status.
    8.When finished, select Quit Disk Utility from the Installer menu.
    9.Select Quit Installer from the Installer menu.
    10.In the resulting pop-up window, choose restart.
    11.After the computer has restarted, you can eject the CD.
    TO REPAIR PERMISSIONS ON THE STARTUP DISK
    1.Open Disk Utility, located in Applications/Utilities, and select the startup disk in the left column.
    2.Click First Aid.
    3.Click Verify Disk Permissions to test permissions or Repair Disk Permissions to test and repair permissions. (I never "Verify". Just run "Repair".)
    When "Repair Permissions" is complete. Quit "Disk Utility".
    ali b

  • Macbook pro won't boot and when I tried to back up the hard drive I got "disk utility can't repair this disk backup as many of your files as possible"

    My macbook pro froze and initially would not even recognize the power chord. Now it charges, but will not load up. I opened in in disk utility to try and back it up so that I could take it to apple to have it fixed but I got the message that said "disk utility can't repair this disk backup as many of your files as possible". How do I back up the files???

    Nichelle215,
    you can try the method described on this Apple page, in the “Instructions for backing up to an external hard disk via Disk Utility” section. (You can skip step 6, since you already know that your disk is irreparable.) Note, however, that this method is not guaranteed to work. Once you get your disk straightened out, you might consider purchasing an external hard disk for use as a Time Machine backup destination, so that a similar problem in the future won’t wipe out the only copy of your files.

  • After getting the dreaded gray/blue screen, I tried to run disk repair on the internal disk. I got an error message saying "Disk Utility can't repair this disk and restore your backed-up files. The volume Macintosh HD could not be verified completely

    After getting the dreaded gray/blue screen, I tried to run disk repair on the internal disk. I got an error message saying "Disk Utility can't repair this disk and restore your backed-up files. The volume Macintosh HD could not be verified completely." What do I do now? This is an iMac and I'm running 10.6.8.

    Clean Install of Snow Leopard
    Be sure to make a backup first because the following procedure will erase
    the drive and everything on it. See below for how to clone a drive.
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. Be sure you configure your initial admin account with the exact same
             username and password that you used on your old drive. After you finish Setup
             Assistant will complete the installation after which you will be running a fresh
             install of OS X.  You can now begin the update process by opening Software
             Update and installing all recommended updates to bring your installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    You may be able to backup your data if you have an erased external drive you can use. Before you do the above but after you have opened Disk Utility you can try to clone your drive:
    Clone using Restore Option of Disk Utility
      1. Open Disk Utility.
      2. Select the destination volume from the left side list.
      3. Click on the Restore tab in the DU main window.
      4. Select the destination volume from the left side list and drag
           it to the Destination entry field.
      5. Select the source volume from the left side list and drag it to
          the Source entry field.
      6. Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.
    Now this will only work if the drive is accessible and can be cloned by Disk Utility. Otherwise, you would need to access your drive from another Mac that you can connect via Firewire - Target Disk Mode.

  • Partition errors - "Disk Utility can't repair this disk"

    I partitioned my external 1TB WD HD into two drives (950GB + 50GB) using Disk Utility (OS X Mavericks 10.9.1). However the 950GB partition will no longer mount. It is recognised in Disk Utility, but grayed out. "Verify Disk" and "Repair Disk" in Disk Utility lead to the worrying error message "Disk Utility can't repair this disk."
    From the Disk Utility logs, the initial partition was successful:
    Partition 1:
    Name:  “Media Centre”
    Size: 948.13 GB
    File system: Mac OS Extended (Journaled)
    Do not erase contents
    Partition 2:
    Name:  “Media Centre 2”
    Size: 50.03 GB
    File system: Mac OS Extended (Journaled)
    Do not erase contents
    Mounting disk
    Partition complete
    Afterwards, I changed the name of the second partition “Media Centre 2” to "BOOTCAMP" (I was going to try to install Windows 7), but then changed my mind and tried to remove the second partition. At that point the log gives the error "Mount of “Media Centre” failed".
    Partition 1 ("Media Centre") now seems to be in limbo, stuck as 950GB, and "Verify Disk" and "Repair Disk" in Disk Utility lead to the worrying error message "Disk Utility can't repair this disk". Also in Disk Utility, Partition 1 ("Media Centre") now has the format classification "Mac OS Extended" rather than "Mac OS Extended (Journaled)".
    Any idea how I can get my hard drive to mount and get the data back?

    In  Disk Utility select the Top most entry on the left, the drive model and or manufacturer name and size entry, then click the Partition tab and Repartition it to your liking. If that fails the drive is bad.

  • Error disk utility can't repair this disk...disk and restore your backed-up files

    I have been working on a project using an external hard disk. I used my Macbook Pro (2010)  to create this project and files (about 31 GB). Now I am trying to open the disk on my iMac (2014) and it doesn't show up. I can see the HDD when I use disk utility but get this message when I try to repair/restore the disc:
    "error disk utility can't repair this disk...disk and restore your backed-up files"
    The funny thing is that the disk works absolutely fine with my Macbook Pro. What am I missing?
    Imac :OSX 10.9.4 , 2.7 GHz Intel Core i5, 8 Gb Ram.

    Nico,
    Did you find a way?
    This just happened to me too.
    https://discussions.apple.com/thread/5981446
    -John

  • "Disk Utility can't repair this disk...and restore the backed up files"

    Hello, my macbook crashed a few days a go  as well and after going to the recovery drive and OX Utilities  tried to verify and repair disk it gives me this error "Disk Utility can't repair this disk...and restore the backed up files" is the second time that occurs after replacing the hard drive for a new SSD, i thought my problem was solved and is not. Any Ideas? the only other thing i can think of is the logic board?

    Backup your files and arrange for an appointment at an Apple store genius bar for a free evaluation.
    Ciao.

  • Disk Utility can't repair this disk...disk, and restore your backuped-up file.

    Computer got uber slow.
    I started to worry.
    Now computer won't start.
    VERY worried.
    Tried to repair disk. Received error message above.
    Any help would be greatly appreciated.

    sulaver wrote:
    Computer got uber slow.
    I started to worry.
    Now computer won't start.
    VERY worried.
    Tried to repair disk. Received error message above.
    Any help would be greatly appreciated.
    You can't have received an error message "Disk Utility can't repair this disk...disk, and restore your backuped-up file." since that is pure gobbledegook and isn't even good English.
    What may have happened is that
    (a) your hard drive has become so full that the operating system can't find any space in which to.... operate.
    (b) as macjack says, it has crashed - possibly as a result of (a).
    (c) you have been allowing Time Machine to back up to your internal hard drive instead of to a backup disk, which has caused (a) to happen.

  • Can I fix a disk with this message?-Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.

    Can I fix a disk with this message?
    Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.

    Some problems can indeed be fixed this way. But working from Recovery_HD or Disk Warrior DVDs and working in the restricted environment those provide can be difficult. You can literally spend days working on this problem (while your regular work is unavailable) only to discover the old drive is unsalvageable.
    There is no way to know up front whether you are facing a major Hardware failure or a minor software glitch, or something in between. Often you are forced to work from the drive you no longer trust. I continue to recommend you do this work from a different, fully functioning Mac OS X booted from a different drive.
    If you have had the foresight to (as The hatter often recommends) clone your virgin install onto another drive for use in such situations, you will be able to recover from such problems in record time. If not, my previous recommendations stands:
    Buy a new Drive. Or  two. Install Mac OS X from scratch on a new drive, and get your Mac running again. Later, you can use the full power of Mac OS X to attempt to rescue your data, if needed. Then Zero the old drive, to see if it can hold data again reliably.
    If the old drive eventually provides some needed data, and is salvageable, Merry Christmas.

  • My computer is shutting down before fully booting up.  I am running the disk utilities program and have this message: Error: Disk Utility can't repair this disk . . . disk, and restore your backed-up files.  Can anyone suggest what I should do next?

    My computer is shutting down before fully booting up.  I am running the disk utilities program and have this message: Error: Disk Utility can't repair this disk . . . disk, and restore your backed-up files.  Can anyone suggest what I should do next?

    So, you can't Install OSX to the external?
    Or you can't boot from it when you do?
    You're not the only one wondering... I'm reminded of the Goose that laid the Golden Egg story.

  • Disk Utility can't repair this disk

    I have been having trouble booting. It started when I connected a router to it. It seemed to eat up the free disk space and I only have 77 MB left or something around that.
    Anyway, I tried deleting files with command-s commands, and it worked one time and it freed up 2 GB of space. I restarted the computer and when I tried to start it up, it still got stuck in the gray screen with the whirly thing at the bottom. I checked the space and it was 77MB now.
    I decided to boot from the Install Disk (Snow Leopard 10.6.0).
    I checked Disk Utility first and verified the disk. It came up with the message:
    "Error: Disk Utility can't repair this disk .... disk, and restore your backed-up files."
    What should I do now?
    I have the Mac HD volume on backup already so I don't have to do the back up stage.
    Should I erase the disk while I am in Disk Utility?
    And format it to Mac OS Extended Journal?
    And then install the operating system again?
    Thanks.

    To answer your questions, first, some other options...
    If you fill your disk up that far, you are going to have problems. Don't ever do this, 10% is a bare minimum, you may need even more, depending on the size of your disc.
    I have seen before where a disc repair utility couldn't perform its function simply because there was not enough slack space available on the drive. While I have never seen this with disc utility, it is possible that the disc is repairable as-is, if you could just free up a couple more gigs of space first.
    Secondly, you could also try Disk Warrior, or to a lesser extent, Techtool Pro, or even iDefrag. I have personally never had Techtool Pro fix anything that Disk Utility or Disk Warrior couldn't fix, so I hesitate to even mention it, but I have had Disk Warrior and iDefrag clear up problems that Disk Utility either couldn't detect, or couldn't fix.
    If you are still in dire straits, you should re-partition the drive using disk utility. This is the safest route, then go from there.
    good luck!
    -a

  • Disk utility can't repair the Macintosh HD, asking toback up all files as possible? and how to  reformat the disk?

    disk utility can't repair the Macintosh HD, asking toback up all files as possible? and how to  reformat the disk?

    Some problems can indeed be fixed this way. But working from Recovery_HD or Disk Warrior DVDs and working in the restricted environment those provide can be difficult. You can literally spend days working on this problem (while your regular work is unavailable) only to discover the old drive is unsalvageable.
    There is no way to know up front whether you are facing a major Hardware failure or a minor software glitch, or something in between. Often you are forced to work from the drive you no longer trust. I continue to recommend you do this work from a different, fully functioning Mac OS X booted from a different drive.
    If you have had the foresight to (as The hatter often recommends) clone your virgin install onto another drive for use in such situations, you will be able to recover from such problems in record time. If not, my previous recommendations stands:
    Buy a new Drive. Or  two. Install Mac OS X from scratch on a new drive, and get your Mac running again. Later, you can use the full power of Mac OS X to attempt to rescue your data, if needed. Then Zero the old drive, to see if it can hold data again reliably.
    If the old drive eventually provides some needed data, and is salvageable, Merry Christmas.

  • Error: Disk Utility can't repair this disk.

    My Server's non-boot volume, while using Disk Utility I get the message Volume bitmap needs minor repair for orphaned blocks.  Then checking volume information.  Invalid volume file count.  It should be 472587 instead of 472588; Invalid bolume free block count.  It should be 236325120 instead of 236325119.  The volume was found corrupt and needs to be repaired.  Volume repair complete.  Updating boot support partitions for the volume required.  Error: Disk Utility can't repair this disk.
    I received this error a month ago and replaced the drive.  It worked fine for a month, but now I receive the same message.

    Did you restore from a time machine backup? If so, what i would suggest is doing an erase then reinstalling, do not restore from time machine during intail setup. Setup a fresh account then use migration assistant to restore from your backup.

  • How do I view and open all my files again that are on my external hard drive?? Error message saying 'The disk you inserted was not readable by this computer' Three options are Initialize, Ignore or Eject.

    I have recently purchased Toshiba 1TB hard drive and I set it up and I was able to transfer all my files onto it such as my music, photos, documents. I had correctly ejected and used it again and all these files were safely stored and accessible afterwards. However after I rebooted my computer as it had been going slow and I had too much clogging it up once I reconnected the external hard drive I have error message saying 'The disk you inserted was not readable by this computer' Three options are Initialize, Ignore or Eject. How do I access all my files? I set it up to work on both mac and windows. I have tried both another mac and windows computer and same issue occurs?? I am worried that all my personal files are gone but am confused as the drive has had absolutely no damage to it as it was in a very short time frame and its never left the same spot. Any help would be greatly appreciated. Thanks

    Thanks for your quick response. I had a look at your discussion... I tried it on a Windows machine and I thought that was compatible with ExFAT?
    Therefore I need to attempt to use my external hard drive with a machine that boasts OS X 10.6.5 or above and then it should work?
    Thanks

  • TS1901 Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.

    Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
    *** ??? I need to take out the data from a WD320 that shows this error and then format the WD and put the data into again
    THANKS !!!

    I'm sorry, is there a question here? You seem to know precisely what you need to do…

Maybe you are looking for

  • Not Receiving Fax's

    My HP Photosmart Premium Fax e-All-in-One Printer - C410a is not receiving any fax's!! Help please! All fax tests came as PASS when running the test on the printer.  All troubleshooting was done but with no success.  What can be the issue?? 

  • How do you get an xml file from the PO Output for Communication report?

    Can anyone tell me how you've created an xml output fil for this program? When I run it, the View XML button doesn't light up, and the output file is empty. I can see the XML when I click the View Log button, but can't figure out how to save it so th

  • Using Reflection on classes outside the classpath

    Hi all, Im writing a tool that takes a directory containing class files (from other internal projects) and returns information such as the Class name, package, parent, constructors and public methods. These projects will not be on the classpath and w

  • How to export full image in PNG format lying inside a smaller sized rectangle?

    Hi In my own created extension for adobe inDesign using CS Extension builder 1.5, I am trying to export a page item lying inside a rectangle frame longer than frame height. Full image is not exported but it gets cropped which is of the rectangle heig

  • Time-split not allowed for routines with return tables

    I've had this issue a couple of times.  It was usually a date field was incorrect.  I have not made any changes concerning update rules.  Any ideas? Thanks everyone! -Ryan.