External hard drive does not register

Hi guys, I'm having a ball sitting till 3am and not going anywhere with this film project.
Yesterday I bought a Seagate 300G IDE 16M firewire/usb drive to use with FCP on a G5 OSX because the lab I share only gives 15G individual workspace.
I want to digitise around 10 hours of mini dv rushes (yeah I know its a lot but can't be helped) which is about 90G, digitising clips of around 30min duration. i've partitioned the hd to two areas, and formatted it for Mac.
So I plug the firewire in to link up the hd the orange icon comes on once. i put the tape into the deck. I log and press capture. It begins to capture/sometimes it stops right there/other times it captures for 20 min. Then the computer freezes. And I have to force quit and the clip is lost. And after I force quit I have to restart the computer and the orange icon/hd drive presence is gone; it never shows up again unless I go to another computer (i am editing in a shared Mac lab)and start again...it is the same with every computer (and they can't all be bad) and the hd is just a two days old and the problem comes up when i use Avid.
So what's the deal?
Yours,

It may not be fast enough to play back media files
without dropping frames I'm afraid... But if you
could copy them from the drive that way to another
drive... then reformat, and copy back.. worth a try I
figure.
Jerry
Thanks again Jerry.
don't mind drop outs in preview as long as media files are captured at best res.
but when you say copy from "the drive" to another is this the internal drive you mean? or is this the external one, meaning after I dump it via usb i pass it on to yet another drive? reformat which drive? I'm jus a bit confused, sorry.
also in utilities it says the drive was all okay and no repairs necessary...so maybe i should open the case up and see if the f/w port is stuffed because i've been jamming it too hard in my desperation? he he.
anyhow. there's no clip duration limit on fcp is there?

Similar Messages

External hard drive does not show up

External hard drive does not show up in imovie.

Hi,
Welcome to the Discussions.
The drive's directory is damaged and as you found Disk Utility isn't equipped to repair it. You need Disk Warrior or Tech Tool Pro.
John

My external hard drive does not show up on my desktop

My external hard drive does not show up on my dest top but, does shows in my Windows (vmware fusion) end although I can't see it ob my desktop but, I can eject it properly like any external drive. I have connected it to my windows and ejected properly (per the suggestion of someone on this forum) but, it still doesn't show on my Mac. I see the blue light and hear it running though. I have looked for it in disk utility but, still can find it. I have changed the cable and it still did not show on my Mac. I connected another external drive and that showed up on my desktop.Any help????

if it is NTFS then you need Paragon Software NTFS for Mac.
NTFS volumes are suppose to be read only but in practice external drives don't always mount or work.
If it is not NTFS then you need more details. Need more anyway.
PS: this is not a MacBook area, it is Mac 65lbs tower related forum.

My external hard drive does not show when I am trying to open a document in Office Org??

My external hard drive does not show when I am trying to open a document in Office Org?? When looking in the about IMAC system support it shows as being connected. Any ideas??

Does the drive show up under 'Devices' in Finder?

External hard drive does not shut down

Hello, When my mini mac goes to sleep my samsung external hard drive does not shut down or dismount properly. when i wake computer i have a error message stating improperly ejected hard drive. It also does not reconize HD until I disconnect and reconnet??? PLEASE HELP Thank you

My Mini was doing the same thing until I reset the PRAM. With four external drives. They would stop inadvertently with an "improperly ejected" error. Granted two of the drives went bad (6 and 7 years old) but a brand spanking new Seagate and a 3 year old Hitachi drive doing the same. Haven't seen the error since resetting the PRAM.
If you don't know how to do that, Reboot while holding the Cmd+Opt+P+R keys until your hear the startup chime three times and then release the keys.

External Hard Drive does not mount

My 2TB external hard drive does not mount and I cannot get it to. Have tried turning the hard drive off and then back on. No response. Any thoughts as to how I can get it to be recognized?

You can try doing a SMC reset, if it doesn't work the first time it's totally OK to reset the SMC several times.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

External Hard Drive does not work with Lion

Hi
My External Hard Drive does not work with Lion this message appears:
NTFS-3G could not mount /dev/disk1s1
at /Volumes/My Passport because the following problem occurred:
/Library/Filesystems/fusefs.fs/Support/fusefs.kext failed to load - (libkern/kext) link error; check the system/kernel logs for errors or try kextutil(8).
the MacFUSE file system is not available (71)
can anyone help?

Hi,
See this Discussion:
https://discussions.apple.com/thread/3191198?start=0&tstart=0
Cheers,

HT3275 Time Machine says my external hard drive does not have enough

Time Machine says my external hard drive does not have enough space for the current backup. It needs 34 G out of a 250G hard drive. All that is on the drive is earlier backups. I recently added memory, which may confuse Time Machine into thinking it is a new computer. How can I erase old backups and complete this one?

Walter Goodman wrote:
Time Machine says my external hard drive does not have enough space for the current backup. It needs 34 G out of a 250G hard drive. All that is on the drive is earlier backups.
See #C4 in Time Machine - Troubleshooting.
If that doesn't clear it up, how much data is on your Mac? If TM is only trying to back-up 34 GB, it should be able to delete old backups to do that (assuming you're running Lion).
It sounds like your backups may be corrupted. Try to repair them, per #A5 in Time Machine - Troubleshooting.
I recently added memory, which may confuse Time Machine into thinking it is a new computer.
If that's all you did, no.
How can I erase old backups and complete this one?
Just erase the drive per #1 or #2 of Using Disk Utility.

External Hard Drive does not show up in Finder

My external hard drive is not showing up in Finder.
It shows up in Disc Utility, but I do not have access to it. I have tried the following:
command-shift c, nothing happens
confirmed in Preferences/General that external hard drive was checked
tried another cable
tried another port on the back of the external drive
tried to connect through the USB port
re-started, etc.

zone-5 wrote:
I have same problem after installing OS 10.5.8. Disk utility sees the hard drive, the computer does not. Disk utility says invalid node structure. Volume check failed. Filesystem verify or repair failed.
That means the directory is corrupt. If you have a heavy-duty 3rd-party disk repair app, such as +Disk Warrior,+ it may be able to fix it. Otherwise, your only option is to erase and reformat the disk. They're not cheap -- Disk Warrior is about $100. And for Leopard, you need version 4.1.1 or 4.2.
I have not been able to figure out how to start a new topic here, but did find this discussion, which fits me fairly close.
Just above the list of topics, on the left, is a +Post New Topic+ option.

External hard-drive does not reconnect after sleep

Hi everyone
I am trying to use my Energy Saver to SLEEP my iMac after 1 hour. It goes to sleep no problem, but on wake-up, my external USB hard drive does not reconnect. There is also an error message that I didn't disconnect the drive properly. I fear this may be one of Mac OS X's "features". Has anyone encountered the same thing?
On a side note, I also find that my USB keyboard does not always reconnect as well. I use a windows USB mouse that I have connected to wake it from sleep, however my USB keyboard (the small one for Macs), sometimes does not allow me to type unless I unplug it and back in.
Another point of note is that both the HD and the keyboard are connected to the iMac through a 7 port USB hub.

r_dizzle wrote:
Another point of note is that both the HD and the keyboard are connected to the iMac through a 7 port USB hub.
I think this might be the issue. If the iMac is waking back up, it will likely be waking up this HUB, but the HUB might not be re-initialising the connection between OS X and the external drive or the keyboard.
After waking the iMac, if you unplug the external drive from the HUB, then plug it back in again, does OS X pick it up again? Have you tried plugging the external drive directly into the iMac and then testing what the result is?
If you read back on what you've said, you pointed out that you have a USB mouse that you use to wake the iMac from sleep. Is this mouse directly connected to the iMac? If so, it surely can't be a coincidence that a directly connected USB device can wake the iMac from sleep, but any USB devices connected to the iMac via a USB HUB cannot.
I would suggest you test the drive as it is directly connected to the iMac. I would complete the same test with the keyboard too. I think you'll find it's the USB HUB.
I hope this helps.

External hard drive does not show up on my desktop.

I just got this imac and when I plug in my external hard drive it does not show up on my desktop. On all of the macs at school it just shows up but they are running lepoard and I have lion so I don't know if this could make a difference. I have tried draging it droping it but that didn't work.
PS I am just switching from a pc to a mac so I don't know much.

Start a finder window. In the menubar go to Finder > Preferences > General tab > Check show HDs on desktop.
Captfred

External Hard drive does not show up on Disk Utility

I have a External Hard Drive that I used to use on a PC.
Recently, I just bought a new Macbook Pro 13'' and want to transfer my documents from the old PC to the Macbook.
My External HD requires a password that you need to type in in order to access the files.
This password thing runs smoothly on my PC, which I can type in my password and get the files. But when I plugged it into the Mac, it didn't recognize it. It only shows the files .exe... and other that can be run by Windows.
So I formatted the HD (I already back up the data), and put it back to the Macbook, I still cannot open it. The system does recognize the connection but when I opened the Disk Utility while still connecting to the HD, the HD does not show on the left column of the Disk Utility.
Then I'm stuck.
Is there anyone here can tell me what I can/should do?
A girl who spends hours on the internet and still cannot figure out why this sh*t is happening to her.

A lot of external drives use firmware passwords as a protection scheme. To use them on a mac, you need to unlock the drive on a PC (I've done it in a virutal machine before). Once unlocked, you can format the drive for use on a mac. The firmware won't run properly on a mac so your ability to lock the drive from the mac will be gone. You can still lock it from a PC (I think, never tried to firmware lock a drive with a mac partition on it).

External hard drive does not mount after sleep

I am using a brand new Seagate 2 TB external hard drive for my backup drive. More often than not, when the computer goes to sleep, the icon for the drive is gone from the desktop when the computer wakes up. I have to unplug it from the computer and reconnect it, then it mounts and works fine. I have it plugged directly into the computer's USB port. The drive uses USB3. As far as I can tell, it does not exceed the power requirements of the USB port. It is the only external hard drive I am using at the moment.
I should note that the same thing was happening with my last hard drive. That was a Western Digital 250 GB drive with an independant power source connected by firewire.
I am running OS 10.6.8 on an Intel circa 2009 iMac. My external drives worked fine for years, and it seems in the last year or so is when this started happening.

r_dizzle wrote:
Another point of note is that both the HD and the keyboard are connected to the iMac through a 7 port USB hub.
I think this might be the issue. If the iMac is waking back up, it will likely be waking up this HUB, but the HUB might not be re-initialising the connection between OS X and the external drive or the keyboard.
After waking the iMac, if you unplug the external drive from the HUB, then plug it back in again, does OS X pick it up again? Have you tried plugging the external drive directly into the iMac and then testing what the result is?
If you read back on what you've said, you pointed out that you have a USB mouse that you use to wake the iMac from sleep. Is this mouse directly connected to the iMac? If so, it surely can't be a coincidence that a directly connected USB device can wake the iMac from sleep, but any USB devices connected to the iMac via a USB HUB cannot.
I would suggest you test the drive as it is directly connected to the iMac. I would complete the same test with the keyboard too. I think you'll find it's the USB HUB.
I hope this helps.

External hard drive does not come out in desktop

greetings! whenever i plug in an external hard drive or a USB flash disk through usb, it does not come out in the desk top. before, it used to come out, now it doesn't. i am still using the exact macbook. i think i touched something in the settings. please help

Go to finder and choose preferences under finder in the menu bar. Now check and see if under General you have the choices clicked of what you want to show on the desk top.

External Hard Drive does not show up in Finder in Tiger

I've attached a Western Digital Mybook to my Time Capsule.
I can access it through Finder on my MacBook. I can access it through My Network Places on the two windows PCs we have (they run XP Professional). I cannot, however, access it on my iBook G4 running Tiger (OS X 10.4.11). I can connect to the TC, but the external hard drive doesn't show up.
This is bad, because I want to use the external as a shared drive for iTunes, etc. Has anyone else had this problem? More importantly, does anyone know of any fixes?

zone-5 wrote:
I have same problem after installing OS 10.5.8. Disk utility sees the hard drive, the computer does not. Disk utility says invalid node structure. Volume check failed. Filesystem verify or repair failed.
That means the directory is corrupt. If you have a heavy-duty 3rd-party disk repair app, such as +Disk Warrior,+ it may be able to fix it. Otherwise, your only option is to erase and reformat the disk. They're not cheap -- Disk Warrior is about $100. And for Leopard, you need version 4.1.1 or 4.2.
I have not been able to figure out how to start a new topic here, but did find this discussion, which fits me fairly close.
Just above the list of topics, on the left, is a +Post New Topic+ option.

External hard drive does not register

Similar Messages

Maybe you are looking for