External Hard Drive Input/Output error

I recently started having problems with an external hard drive setup that I did not have problems with prior to upgrading to 10.5.5 and trying to setup the drive to be compatible with Time Machine.
The hard drive enclosure that I have has 2 bays for two SATA drives. I have used this enclosure without any problems until I tried to get 1 drive to act as the backup drive for Time Machine and the other to be storage. I formatted them using Drive Genius. I used the option for GUILD or GUIL which it said was the better format for using with Time Machine.
The first problem I ran into since upgrading and reformatting the drives is I got an "input/output" error the first couple times I connected the drive via USB to my Mac. I could still use the drives but I got weird errors every once in a while like "input/output error" or "device was not ejected properly" even though the device had not been unplugged.
Now the drives will not mount using OS 10.5.5. The drives show up when I open Disk Utility, but I cannot get them to mount. I have ran Disk Utility First Aid, and it says the drives are fine. There is one error that shows up when I run the "Repair Disk" feature. It reads "Invalid content in Journal". But Disk Utility also says "The volume was repaired successfully".
I have seen some posts when I do a search in google about this issue and it seems this is a known issue. Every suggestion I see says to insert your Tiger DVD and reformat the drive using that and the problem will be solved. The only problem with that is I have a lot of important files on the drive that I cannot lose. I had the files backed up until I moved them to the new drive a while back. Now I do not have a backup because I was in the process of switching to bigger drives and erased the old drives after doing so because everything was working fine.
I am hoping someone out there may have some suggestions (other than erasing the drive) to get my dives to mount so I can transfer the data off to another drive and reformat after.
Thanks,
Paul Rugg

Thanks for the suggestion.
Do you think that would work better than Drive Genius? I bought Drive Genius 2 and it does not even see the drives when they are plugged in unlike Disc Utility which can see the drives but cannot mount either one.
Maybe this following post I made to a different questions may help. The data on the drive is other buying another program for if it will work. I think my next step may be to go over to a friends place and try to mount the drives on his computer and transfer stuff off if they connect.
text below posted to other question relating to external hard drive problem.
I have recently had the same mounting issue with my new external hard drive. I just purchased a new 750Gb Western Digital Sata drive and got everything transfered over to it. Immediately, I got an error saying that the drive had been ejected incorrectly even though it was still plugged in. I was a little curious. I restarted the computer (hard drive still plugged in via USB 2.0) and the drive showed up just fine. I plugged another 250Gb drive into the same case (2 bays) and the 250GB drive showed up just fine.
Well, I then noticed there was an OS upgrade available when I ran Software update so i ran it and when I rebooted the drives were gone. I can see the drives in Disc Utility, but they will not mount. Drive Genius cannot see either disc. Disc Utility says I need to repair the drives, but when I do it says they are fixed but they don not mount.
The problem really seems to be related to mounting USB external drives. I got ahold of 2 seperate external firewire hard drives and one shows up just fine while the other has the same problem (both work on other systems. I would try wiping the drives and reformatting but ALL MY stuff is on them and not everything has been backed up. Yuck! I have not tried connecting my hard drive to another Mac yet.
The drives being used are #1 Maxtor Maxline Plus II 250GB SATA/150 HDD 1.5b/s 7Y250m00654ra
and #2 Western Digital WD7500AACS WD Caviar GP Green Power drive.
I have another post similar to this and I have not received any feedback, but I have been doing my own searching and have found similar posts on the net.
Anybody have any clue what might be going on here? It really seems to be related to my upgrade.

Similar Messages

  • Hard Drive "Input Output" Error When Attempting to Format

    A friend just gave me a nice PowerBook that seems to be in need of a fresh OS and when attempting to format the hard drive I am getting an "Input Output" error.  Any suggestions to overcome this issue and format the drive?

    Hi all,
    I'm having similar issues on a white macbook (2006 model). I ran into some trouble with it about a month ago, when on booting up, it showed only the folder with a question mark. Booting up from the original grey install DVD worked, so I thought the problem was most likely a faulty hard drive.
    It's only after having this problem, that I came across this recall for possible faulty hard drives, that Apple offered:
    http://www.apple.com/support/macbook/hd/repairextension/
    Doh! Too late?
    So, I got onto ebay and picked up a deal and received my new hard drive yesterday. I swapped out the original 80GB with 320GB, only to find the same input/output error described by the OP, here (also in a couple of other Apple discussion posts - see below).
    Disk utility shows the new hard drive to be 2.3TB in size! Should be 320GB - but, this is also what others have described. See e.g.,:
    https://discussions.apple.com/message/16090313#16090313
    I've run the extended testing from the CD (holding down 'D' on boot-up) and it reported no problems. Also, similar to others experiences:
    https://discussions.apple.com/message/16081818#16081818
    So, what can the problem be?!?!?!?!?
    In this post, JMPC suggests it has something to do with the size of the new internal hard drive....groan.....:
    https://discussions.apple.com/message/16145560?tstart=0#16145560?tstart=0
    Can anyone confirm this?

  • How do I view and open all my files again that are on my external hard drive?? Error message saying 'The disk you inserted was not readable by this computer' Three options are Initialize, Ignore or Eject.

    I have recently purchased Toshiba 1TB hard drive and I set it up and I was able to transfer all my files onto it such as my music, photos, documents. I had correctly ejected and used it again and all these files were safely stored and accessible afterwards. However after I rebooted my computer as it had been going slow and I had too much clogging it up once I reconnected the external hard drive I have error message saying 'The disk you inserted was not readable by this computer' Three options are Initialize, Ignore or Eject. How do I access all my files? I set it up to work on both mac and windows. I have tried both another mac and windows computer and same issue occurs?? I am worried that all my personal files are gone but am confused as the drive has had absolutely no damage to it as it was in a very short time frame and its never left the same spot. Any help would be greatly appreciated. Thanks

    Thanks for your quick response. I had a look at your discussion... I tried it on a Windows machine and I thought that was compatible with ExFAT?
    Therefore I need to attempt to use my external hard drive with a machine that boasts OS X 10.6.5 or above and then it should work?
    Thanks

  • Bought new Mac Retina; how do I get CS 5 on it; bought external hard drive but get error msg 15?

    Bought new Mac Retina; how do I get CS 5 on it; bought external hard drive but get error msg 15?

    Hi there,
    I was able to format the Toshiba hard drive on my old Mac and copy the Adobe Suite onto it. I followed instructions to format the hard drive to the Retina Mac through Disk Utility, but I still can see the external drive on the new Mac.
    Any suggestions…?
    Susan Babin

  • Problems copying files from an external hard drive to MacBook (error code 36)

    A little while ago I backed up some files on my iMac to an external hard drive (formatted in the Mac format). These were primarily office documents (PDF files, Microsoft Office) and some photos. The documents had orignally been copied to my iMac from a PC (via USB), whilst the photos were imported directly to the iMac. Having brought a MacBook Pro recently, I've been attempting to copy the data over. Unfortunately, I keep getting error code 36 when it attempts to copy the files over. I've tried skipping some of the files it gets stuck on, but it keeps finding more. This also happens when I am just trying to copy over a folder of photos. Another unusual thing that I noticed is that when I try to copy a folder containing just under 300 files, when it attempts to copy it says it is trying to write 1,500+ files... which I don't quite understand.
    I've run the disk utility tool to check the hard drive, but it says it's fine. Prior to copying the data over to the external hard drive in the first place, it had been freshly formatted. Unfortunately, since this was the backup disk, I kinda need to save these files!
    Does anyone know of any solutions out there that could help?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Click the Clear Display icon in the toolbar. Try the action again. Post any messages that appear in the Console window – the text, please, not a screenshot.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • HT1449 move itunes library to external hard drive : fails with error -50

    Following the steps to move my iTunes library to an external drive, everything is strating well, the copy beginns and after 2 hours of copy, I had this message failure with error -50.
    My external hard drive is a timecapsule with enough free space.
    Please could you tell me what's hapenning ?
    Thank you!

    I suggest you keep the entire iTunes folder to gether rather than moving only the media.
    Quit iTunes.
    Copy the entire /Music/iTunes/ foldder to teh external drive.
    Launch iTunes and hold Option.
    Select Choose library... and select the iTunes folder on the external.
    This is all you need to do.

  • Moving data from one external hard drive to another ERROR-36

    i got a new hp simplesave external hard drive, and i'm moving all my files from an older external hard drive (can't find brand name). Some of the files are bringing up error 36 which is something along the lines of can't read/write file. which is causing the file transfer to stop on that one file. there are a lot of damaged files so the file transferring is going very slowly. is there a way i can find out which files are bad ahead of time so i can get rid of them AND THEN transfer the files?

    Well, since the MacBook with Tiger still has issues with the drive, I think it is some kind of hardware problem related to the external drive. I have numerous USB and FireWire drives connected (probably too many), and I've had no issues with Snow Leopard. Snow Leopard makes my older Intel iMac run better than when it was new.
    Make sure you try connecting the drive to a separate power outlet, if it is connected to a power strip. It is also possible the drive's power supply is failing; that can cause the the improper disconnect message to come up, because the drive inside is not getting sufficient power. That is why you need to try the hard drive in a different case, or using the USB adapter, to eliminate possibilities.
    Also, I still don't know if this drive is USB or FireWire, but be sure to try it with no other devices connected, in case there is some interference between devices.
    One more thing you can try to rule out a problem with your currently installed system. Start up using the Snow Leopard installation disc; insert disc and restart with the C key held down. When you get to Installer's first screen, go up to the menu bar and, under Utilities, select to run Disk Utility.
    At this point, you can just leave the iMac alone for a while to see if the drive gets ejected. If it does not, try making a Disk Image of the external drive and saving the image file to the iMac's internal drive. If that works, there may be some issue with your current installation (and you have a backup of the data). If it fails, then I think you have confirmed that the problem is with the external drive, not the iMac or Snow Leopard.

  • Formating Western Digital External Hard Drive gets an error

    Hi!
    I just bought a 500GB Western Digital External Hard Drive (uses Firewire 400), primarily for storing HD iMovie and Final Cut Express files. When I checked the iMovie support, it recomends to format the external hard drive as Mac OS X Extended (Journaled). I opened Disk Utility, selected the hard drive (My Book) and followed the steps to both erase and reformat it. I have gotten an error numerous times that says:
    Error
    +Disk can't be remounted+
    Something like that. I don't know why I'm having this problem, but any help would be very appreciated. I just bought a Canon HV20 and want to get to use it soon...
    Thanks!
    Apple.User
    FYI: I have an Intel iMac and Mac OS X 10.5.2, along with any of the latest updates for it.

    Try doing it this way:
    Extended Hard Drive Preparation
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
    Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.

  • Can't acces to internal laptop hard disc - input/output error

    Sometimes when I use my i can't acces to any file on my hdd and i get input/output error when i type commands in console(i even can't halt or reboot). This is used to happen suddenly after few hour of work in one session (not always, it happend three times during last week)
    When i get this error the hdd control led  is on (I have ibm x60s with ssd hard disc, and normaly this diod only blink sometimes, bbut when i get this error , diod is  the whole time floodlite. I didn't any similar problem in google so i posted it here.

    Welcome to the forums.
    Not exactly alot of info to go on here. Try reading up on the "How to post" article on the wiki.
    As for the trouble at hand. With the limited info given, I'd say start off with running some health checks on your disk (smartctl, fsck,...).
    Last edited by Gcool (2012-03-29 05:23:32)

  • External HD reformat (input/output error)

    I'm trying to reformat my external hard drive but it gives me this error everytime.
    I have tried reformatting it on another laptop (running snow leopard) and it still didn't work
    I also tried doing it while booted from CD but still didn't work.

    I'm trying to reformat my external hard drive but it gives me this error everytime.
    I have tried reformatting it on another laptop (running snow leopard) and it still didn't work
    I also tried doing it while booted from CD but still didn't work.

  • Time Machine - External Hard Drive Read only error

    Just recently got a Iomega 1TB MiniMax FireWire 800 USB 2.0 Desktop Hard Drive and used Time Machine to backup my computer. This was my first time using Time Machine and it successfully backed up 350 GBs. It continued to do backups every hour. When I turned my computer off and then turned it on the next day Time Machine wouldn't allow me to do a backup because it said the hard drive was read only. When I checked info it said it was read/write. I used disc utility to verify disc it said it could not verify disc do a disc repair. Disc repair failed and it said reformat disc. I erased the hard drive tried again and I got the same error message. The hard drive is formatted Mac OS Extended (Journaled). I searched this forum and the trouble shooting links and couldn't find anything on how to correct this. Any help on this problem would be appreciated.

    See the following:
    What to do if Time Machine reports you don't have permission
    This was posted in the Apple Discussions by V.K. I have only modified it slightly to be more generic.
    The problem seems to be that 10.5.6 changes permissions on a file so that even the root user doesn't have write peivileges. I have no idea why they did this. The workaround suggested in [an]other post will probably work, too, but i did something less drastic. Instead of deleting the file I changed permissions on it, and it worked just fine. An added benefit is that the permission change seems to stick, so you don't have to delete the file every time you change a drive.
    [Open the Terminal application in your Utilities folder. At the prompt [enter] the following command:
    sudo chmod 644 /volumes/"TM drive name"/.xxxxxxxxxxxx
    The name of the file .xxxxxxxxxxxx is based on the MAC address of your computer and will be different for every computer. Put the name of the TM drive in the above and keep the quotes.
    You'll have to enter your admin password (which you won't see) which is normal.
    This was edited by Kappy just for cleanup.
    Enable Finder to Show Invisible Files and Folders
    Open the Terminal application in your Utilities folder. At the prompt enter or paste the following command line then press RETURN.
    defaults write com.apple.finder AppleShowAllFiles TRUE
    To turn off the display of invisible files and folders enter or paste the following command line and press RETURN.
    defaults write com.apple.finder AppleShowAllFiles FALSE
    Alternatively you can use one of the numerous third-party utilities such as TinkerTool or ShowHideInvisibleFiles - VersionTracker or MacUpdate.
    Also, see User Tips for Time Machine for help with TM problems. Also you can select Mac Help from the Finder's Help menu and search for "time machine" to locate articles on how to use TM. See also Mac 101- Time Machine.
    Message was edited by: Kappy

  • External hard drives and Error Code -36

    Just wanted to know if anyone knows what this error code means. I tried copying a bunch of video files about 600-700 mb to my USB external hard drive, and this error message popped up and said the disk could not be read or written to. I contacted the manufacturer of the hard drive and they said it was not a manufacturing fault, but an issue regarding the operating system.
    Does anyone know why this might be? And also, does anyone know of anyway to get around it?
    Thanks.

    You can try DiskWarrior to repair the directory. If DW can't do it, you'll need to re-format the drive. I'd also suggest a zero out erase.
    Steps for zeroing the drive Disk Utility:
    1. Insert your Mac OS X CD-ROM disc or Restore DVD disc, then restart the computer while holding the C key until you see the spinning gear.
    2. Once started up from CD or DVD, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)

    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from disc to access Disk Utility.
    3. Choose the entire disk (top icon).
    4. Choose erase tab.
    5. Click on "Security Options"
    6. Choose "write zeros".
    7. Erase
    This will take a bit of time because the computer is physically writing zeros to each block.

  • (SOLVED) external hard drive

    when i try to delete files on my external hard drive i get error could not delete file. do i need any special permissions or what?
    Please help.
    Thanks!
    Last edited by Rician (2011-04-02 16:16:26)

    The filesystem used on the drive is NTFS. i installed ntfs-3g, its fixed. i cant belive how much time i have spent trying to figure out how to get it working... and here you come with a simple solution... Thanks

  • External Hard Drive not Readable & Input/Output Error?

    I was using my OWC 300gb external hard drive for a while and it's worked great. I had a bunch of files on it, but I recently transferred everything to another external HD I have, which worked fine, so I could erase this 300gb one. I can't remember what happened, but somehow my Macbook doesn't recognize this hard drive. I think erased everything and then unplugged it without ejecting it first. Anyways, nothing is on the the drive anymore and I get this error message:
    "The disk you inserted was not readable by your computer"
    This pops up when I restart my Macbook. When I try to use Disk Utility, it greys everything out on the partition and Disk Repair tabs. On the 'Erase' tab, it will allow me to select Erase, but then gives me the error:
    "Input/Output error"
    Does anyone know how to get my Macbook to see my drive (so I can start to partition it)? For some reason only Disk Utility acknowledges it's there, Finder won't.
    Anyone have any tips of what it is or what I can try? I did try to use my OS discs booting up holding C, but that doesn't work either.

    Hi there. Everyone is saying on these forums that the hard drive is failing...suck. I went and bought a new when I got input/output error and found that the new one showed the same input output error, making it impossible to partition the disk. Then the guy in the apple service center told me the new one was bad too, after having seen the code that came up related to my new scorpio 250 GB drive. Instead of sending it back, I took it out and installed the old one..however this time with a slihtly more of pressure on the tape holding down the hard drive cable between the hard drive and the circuit board. Amazingly, this time it didn't even show any hard drive at all! Then I understood what was wrong. It was exactly what was indicated an "input/output errror"! ..the cable was broken. I bought a new cable, well the Powerbookmedic sold it as new but it was an old working one that arrived. Immediately, after change of cable the old hard drive and now also the new 250 GB works perfectly! I remember that some interesting symptoms prior to all hard drive problems appeared, such as not being able to start up properly, strange blue screens, flipping question marks etc. I remember that shaking the comp occasionally worked to get it going. No wonder, shaking occasionally made it work and i believe the damaged cable maybe changed position and started conducting. The cable is very sensitive and probably should not be taped down so hard as the first service center guy at apple had done with mine when he fixed it the comp a few years ago. Polymers/plastics bent heavily become fragile/brittle with time and are specially sensitive under pressure/bent. Note that my old damaged cable still conducted and showed the hard drives but didn't work fully. I hope this will help someone, it took me 2 month to figure out..

  • Hi, I have a hard disk failure so to recover my data I am using disk utility to restore the data on an external drive while booting from a second external hard drive. When I perform the operation it gives me an input/output error and stops. Any tips?

    Hi, I have a hard disk failure so to recover my data I am using disk utility to restore the data on an external drive while booting from a second external hard drive. When I perform the operation and after having selected both my destination and source drives, the operation begins but soon fails due to input/output error. If I try to create an image of the drive it gives me the same error message. Any help would be much appreciated.

    Disk Utility only creates a image of the drive, so it's no help getting exactly what you want, which is your files. If the file structure is messed up or the drive is failing then it's no help.
    If you have a external boot drive and you can't access the internal non-booting drive though the typical Finder and windows to transfer your files via drag and drop methods, then you need to install Data Rescue on the external boot drive and it will do as best as it can to recover your files. (works on non-encrypted/non-Filevaulted drives only)
    .Create a data recovery/undelete external boot drive
    Are you sure you have hard drive failure, or that OS X isn't merely not booting?
    Because if the drive is working physically, then there is a host of fixes
    ..Step by Step to fix your Mac
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/

Maybe you are looking for