External Hard Drive Isn't showing up.

Today i was moving some files on and off my WD 1T harddrive for about an hour or so when it just stopped reading? I didn't move it at all while it was in use. The name of the hard drive in the side bar just turned a grey colour and froze. It would not eject so i had to pull the cord out. Iv tryed to put it in to 3 different computers (all macs) and still the same issue. All the lights still turn on when i plug it in and i can hear it start up but its just not being picked up on the computer (not showing up in disc utility either). if someone could please help me it would be greatly appreciated. cheers
Louis

Check the settings in the General tab of the Finder's preferences.
(66178)

Similar Messages

  • HT2518 my external hard drive isn't showing up on my Mac desktop.  Does the external hard drive need to be an apple one?

    I have recently bought a Mac Book Pro and I am trying to transfer my files from my old PC to the new Mac.  I have put my files onto an external hard drive but when I plug it into my Mac is doesnt show on the desktop? 

    Check the settings in the General tab of the Finder's preferences.
    (66178)

  • External Hard Drive no longer showing in Devices

    My external hard drive no longer shows up as a device on my MBP. It has worked fine since the day I plugged it in.
    The Time Machine is using the HD, and continues to do it's backups, so power and USB connection is not an issue
    The HD shows up in Disk Utility (The Time Machine portion AND the partition that I've been using for storage)
    I ran a repair on the partition in Disk Utility and it checks out OK
    I can access this partition from VMware Fusion, so the windows side of the MBP sees it, and it's operational
    Used the HD all day yesterday without issue
    I've restarted the MBP to see if it would find the HD partition after a restart, it doesn't
    I've unplugged (USB) and powered-off the HD, and when I power-on, it still isn't seen.
    Any ideas?
    John

    If TM is turned on and it still doesn't show up then do a SMC reset.
    SMC RESET
    Shut down the computer.
    Unplug the computer's power cord and ALL peripherals.
    Wait 15 seconds.
    Attach the computers power cable.
    Wait another 5 seconds and press the power button to turn on the computer.
    PRAM RESET
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • External hard drive does not show up

    External hard drive does not show up in imovie.

    Hi,
    Welcome to the Discussions.
    The drive's directory is damaged and as you found Disk Utility isn't equipped to repair it. You need Disk Warrior or Tech Tool Pro.
    John

  • My Western Digital external hard drive suddenly stopped showing up on my Macbook Pro and disappeared from Disk Utility. It works on a PC.

    My Western Digital external hard drive suddenly stopped showing up on my macbook pro and it disappeared from disk utility. I have tried making invisible files visible but nothing has worked and my hard drive shows up on a PC but not my Mac anymore.

    What is the manufacturer of the external and how old is it? Does it have its own AC power supply or is it USB bus powered?

  • My external hard drive doesn't show up in finder, is it dead?

    My external hard drive doesn't show up in finder.Time machine can't find it. Does this mean my external hard drive is dead?
    I borrowed a friends and switched mine with hers. My acted the same way in her macbook. I switched the cords on the external drives, no change.
    Also, Is there a way to retrieve the information from my sick external hard drive? Thanks for your help.

    If the Disk Utility sees it, you might be able to repair it or recover the data on it with a product such as DiskWarrior or Data Rescue.
    If the Disk Utility doesn't see it, contact professional support.
    (64290)

  • External Hard Drive does not show up in Finder

    My external hard drive is not showing up in Finder.
    It shows up in Disc Utility, but I do not have access to it. I have tried the following:
    command-shift c, nothing happens
    confirmed in Preferences/General that external hard drive was checked
    tried another cable
    tried another port on the back of the external drive
    tried to connect through the USB port
    re-started, etc.

    zone-5 wrote:
    I have same problem after installing OS 10.5.8. Disk utility sees the hard drive, the computer does not. Disk utility says invalid node structure. Volume check failed. Filesystem verify or repair failed.
    That means the directory is corrupt. If you have a heavy-duty 3rd-party disk repair app, such as +Disk Warrior,+ it may be able to fix it. Otherwise, your only option is to erase and reformat the disk. They're not cheap -- Disk Warrior is about $100. And for Leopard, you need version 4.1.1 or 4.2.
    I have not been able to figure out how to start a new topic here, but did find this discussion, which fits me fairly close.
    Just above the list of topics, on the left, is a +Post New Topic+ option.

  • External Hard Drive is Not Showing Up on Desk top?

    My external hard drive is not showing up on my desk top any more. When I tried to reconnect it I get the follow message.
    You have inserted a disk containing no volumes that Mac OS X can read. To use the unreadable volumes, click Initialize.
    Help what should I do? I have 50 GB of music on it and it's never had this problem before.
    Thanks
    Jeremy

    Norton has a bad reputation because they have not kept up with changes in the Mac file structure. Norton version 8 is the one you should be using, if you choose to use it. Earlier versions will likely damage your directory, possibly beyond repair by other utilities.
    Any time you use any Disk Repair Utility, it is somewhat of a crap shoot. It may or may not be able to make the repair, and you may or may not lose a few to very many files in the process. The program best respected in this arena is Disk Warrior. If you choose to buy it, pay very close attention to which version you are buying, as the latest version CD (intended to boot 10.3 or 10.4) may not boot on your Mac.

  • External hard drive is not showing up when attached by USB

    My WD External Hard drive is not showing up on my iMac when i connect it by USB

    Hi, does that mean it shows up some other way of connecting it?
    Is it Bus powered or does it have AC power?

  • HELP! External hard drive won't show up in finder!

    Last night, I was updating my macbook (from August 2008, still runs on leopard) and it needed to restart. I forgot to eject my LaCie Porsche 1tb external hard drive first and, when it rebooted, I got the error of death (aka "disk was not ejected..."). When connected to the USB port, the drive lights up, I can hear it spinning, but it won't show up in finder and I can't see it in Disk Utility to repair it (after the first error of death, the computer wouldn't even acknowledge that I had the drive plugged in). I've tried plugging it into the different USB ports and even on a different macbook, but no luck in getting the computer to recognize it long enough to use Disk Utility or DiskWarrior. Any tips on how I can get my macbook to read the drive again?

    If the external hard drive is not showing up in Disk Utility when connected to two or more different computers, then the problem is with the hard drive, it is broken. Get a new one.

  • My external hard drive does not show up on my desktop

    My external hard drive does not show up on my dest top but, does shows in my Windows (vmware fusion) end although I can't see it ob my desktop but, I can eject it properly like any external drive. I have connected it to my windows and ejected properly (per the suggestion of someone on this forum) but, it still doesn't show on my Mac. I see the blue light and hear it running though. I have looked for it in disk utility but, still can find it. I have changed the cable and it still did not show on my Mac. I connected another external drive  and that showed up on my desktop.Any help????

    if it is NTFS then you need Paragon Software NTFS for Mac.
    NTFS volumes are suppose to be read only but in practice external drives don't always mount or work.
    If it is not NTFS then you need more details. Need more anyway.
    PS: this is not a MacBook area, it is Mac 65lbs tower related forum.

  • After installing snow leopard my external hard drive won't show up on screen or backup

    Afer installing leopard my external hard drive won't show up on my desk top.  It also won't backup my hard drive with time machine. I need help.

    Try going to finder preferences, general, make sure show these items on desktop external disks is clicked. You can also go to sidebar (same pane) and click it there so it will show when you open your HD.  Time Machine>system preferences>time machine>turn it off click select disk, make sure the correct disk is selected, the turn TM back on.  Hope this helps.

  • My external hard drive does not show when I am trying to open a document in Office Org??

    My external hard drive does not show when I am trying to open a document in Office Org?? When looking in the about IMAC system support it shows as being connected. Any ideas??

    Does the drive show up under 'Devices' in Finder?

  • External Hard Drive does not show up in Finder in Tiger

    I've attached a Western Digital Mybook to my Time Capsule.
    I can access it through Finder on my MacBook. I can access it through My Network Places on the two windows PCs we have (they run XP Professional). I cannot, however, access it on my iBook G4 running Tiger (OS X 10.4.11). I can connect to the TC, but the external hard drive doesn't show up.
    This is bad, because I want to use the external as a shared drive for iTunes, etc. Has anyone else had this problem? More importantly, does anyone know of any fixes?

    zone-5 wrote:
    I have same problem after installing OS 10.5.8. Disk utility sees the hard drive, the computer does not. Disk utility says invalid node structure. Volume check failed. Filesystem verify or repair failed.
    That means the directory is corrupt. If you have a heavy-duty 3rd-party disk repair app, such as +Disk Warrior,+ it may be able to fix it. Otherwise, your only option is to erase and reformat the disk. They're not cheap -- Disk Warrior is about $100. And for Leopard, you need version 4.1.1 or 4.2.
    I have not been able to figure out how to start a new topic here, but did find this discussion, which fits me fairly close.
    Just above the list of topics, on the left, is a +Post New Topic+ option.

  • Catalogs,my external hard drive used to show up as its own folder in my folders but for some reason it now showers up as an extension of my internal HD for my Mac . In finder it shows my External drive is a folder called volumes, along with my Mac hard dr

    For some reason my external hard drive no longer shows  up as its own folder, instead it shares a folder named volumes with my Macs HD, whats the best way to move it.?

    I have the same problem.  Let me know when you find a fix.

Maybe you are looking for

  • WHY IS IMPORTING FROM CD SUDDENLY SO SLOW??

    When I click on the Import CD button at the bottom of the page, the titles are immediately displayed as per usual in the program and each entry is checked. But the importation used to ZOOM through whatever titles were checked. Now everything is in mo

  • How can I enable the Dashboards  in the UCM 10G  ?

    Hi to all, How can I enable the Dashboards in the UCM 10G ?

  • DIRECT MODE에서의 PARALLEL DATA LOADING

    제품 : ORACLE SERVER 작성날짜 : 1999-08-10 Direct mode에서의 parallel Data Loading ======================================= SQL*Loader는 동일 table에 대한 direct mode에서의 parallel data load를 지원하고 있다. 이는 여러 session에서 동시에 데이타를 direct mode로 올림으로써 대용량의 데이타의 로드 속도를 향상시킬 수

  • Change Language on HP Color LaserJet CP1518ni

    Hi, Help!  My four year old twins have managed to change the language on the printer to something with cyrillic characters - I can't figure out how to change it back to English.  I have tried guessing the menu sequence but have failed. Any help appre

  • How to remove srial number profile ?

    Hi sap Guru, my issue is how to remove serial Number profile in material master, a  material use all  plant ,only  one plant  serial number profile is on, ex- having  plant 1000,2000,3000,4000,5000,6000. plant 6000  serial number profile is on, havin