External Hard Drive Issues

I'm a new MacBookPro owner, and I also recently purchased a SANSUNG HD501LJ Media SATA II 500 External Hard Drive. I've had problems with my computer locking up either when I first install the hard drive into the expresscard slot or when it's been connected for a while. I am in the midst of moving all of my content from the external hard drive ot my internal so that I can run First Aid or Erase it completely if necessary. Does anyone have any idea what it might be, outside of needing to replace the hard drive?
I should say, I don't think its limited to this, but I have only used this hard drive for Motion needs so far. I didn't post in the Motion 2.0 boards because the hard drive problems seems to affect the whole computer.
Oh, in case this helps:
MacBook Pro 17"
2.33 GHz Intel Core 2 Duo
2 GB 667 MHZ DDR2 SDRAM
MacBookPro   Mac OS X (10.4.8)  

hi Jonathan!
it tells me that the folder "iTunes" could not be found or created, and is required to start the program.
good gracious ... okay, your
b registry
is still convinced that the folder is still on the external HD (or the path to the folder still runs through the hard drive). i'm assuming here that the current location of that folder is the default one on the C drive?
if so, try the technique that used to work for us with 4.9 (scroll down to the bottom of the page to see the relevant post in the thread):
b noir, "The “iTunes Won’t Work &/or Won’t Install” First Aid Kit" #10, 01:36pm Sep 7, 2005 CDT
if no joy with that, post back. if toonz is around and sees you, she might be able to help guide you through any additional bells and whistles.
love, b

Similar Messages

  • 1st Gen Time Capsule and External Hard Drive Issues

    I have a 1st generation Time Capsule and have never had any luck connecting an external hard drive (both Western Digital MyBook and Seagate FreeAgent Pro) via an USB hub for an extended period. They will connect for a few hours or up to a day or two before they lose the connection and look up the wi-fi connection (although the internet and connected printer don't seem affected). Thought it might be an issue with the powered hub, but have same issue with both (Belkin and APC). I have read that others have had similar issues.
    For laughs, I connected a dinky personal drive (WD My Passpoert 750gb) to the USB hub and it came up instantly and had no issues for the 12+ hours it was connected. Question #1: can I run a portable drive for an extended period of time (weeks, months, years) via USB hub without killing it?
    Also, I would like to house my large iTunes and iPhoto libraries to be accessed by 3 different MacBooks. Question #2: is a NAS drive connected directly via ethernet to the TC is the best answer?
    I am spoiled by the simplicity of the plug-and-play connectivity of Apple products. Is there a mysterious sequence of procedures that I need to follow to get the Time Capsule to play well with the USB connected HDs?
    Thanks in advance for your help.

    To answer the general question, a drive that is constantly spinning is both more likely to be damaged and less likely to give issues of access to the USB.. the one fights the other. Feel the small passport drive and see if it is continually spinning.. if so that could account for it maintaining connection.. although according to your testing 12hrs is not long enough to know for sure. Feel the other drives. If they spin down and then when you try to access them, do they spin up? Or is it the spin down time that dictates the time they are available on the network. It may simply be a case of usb connected to a router is not getting the correct spin up info.
    IMHO a NAS is the right way to do this.. especially if you have multiple computers accessing it. USB is not a fast connection. Especially hanging off the TC series 1, were not renowned for speed. A NAS is not that expensive now and using a mirrored raid you at least have some protection. Remember to always have the source files in mulitple locations. A NAS can also work as an itunes server, which the TC cannot. And the connection from gigabit ethernet to sata is not made via usb.
    As a secondary option.. open your series 1 TC and put in a 2TB hdd.. this is well documented.. larger sizes give trouble but the series one can easily be updated to 2TB.. remember also the power supply in a series one can go at any moment. Get ready for it, plan for it.. one day it will happen.

  • External hard drive issue - PC to Mac (weird problem...)

    Hi everyone,
    this is my first post and new to Macs, so apologies if this may have been covered elsewhere (though I can't find an answer!), but I'm getting seriously frustrated with this issue!
    I've just recently been given an iMac and I'm trying to access my files and use my previously PC-mounted external hard drive as my iTunes library and general storage for everything else. However, I'm having permission issues in that it will only allow me read-only status. I followed instructions from other forums and google searches that said I should install macFUSE and NTFS-3G drivers and this would solve the issue, which it did. Then my girlfriend turned off the hard drive accidently at the wall socket and once I remounted it, it has returned to read-only once again and even re-installing the drivers makes no difference!!!
    I'm running an iMac PowerMac G4, Mac OS X 10.5.6 if that has any relevance?
    Any help????
    Thanks,
    Adam

    Hi Adam;
    Personally instead of attempting to use NTFS, I would suggest that you reformat to HFS+.
    Using NTFS on a Mac is always a kluge at best. It will always give you problems. If you reformat to HFS+ then you are using the native format and everything should work much better for you.
    Allan

  • Windows 8.1 and IOMEGA External Hard Drive Issues

    Since I upgraded from Windows 7 to 8.1 my computer will not now recognize my IOMEGA external hard drive.  How could just updating Windows not allow my hard drive to be accessed?  Please help?  I do taxes on the side and all my clients's
    tax returns are on this external drive and need to be accessed.  I have a laptop with Windows 7 and it recognizes the hard drive with no problem.  Only problem is I do not want to do taxes on my laptop.  Is there a patch somewhere to help? 
    If not,how much trouble is it to go back to Windows 7 because this issue is a serious one with me?  I know I am not the only one with this issue because if you search on IOMEGA the issue is going on with others.  I just have not seen a real
    solution to the problem yet. Thanks in advance to anyone who can help me.

    Hello Dewayne H,
    What is your current situation?
    Have you tried the solution as britishdhez mentioned?
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • Stardom External Hard Drive Issue

    Hey all,
    Hopefully someone can help me out with a small issue I'm having with a new external hard drive.
    I recently purchased a Stardom External Storage system (SohoTank ST2-WBS3) 2 bay, usb 3.0.for creating backups of my data currently stored on other usb 3.0 hard drives.  The hard drives I bought are Western Digital 3TB formatted to Mac OS Extended (Journaled).  The drives mount fine but when I started coping data to them, the drives would unmount themselves after a random period of time, sometimes straight away, other times after 10 to 30 seconds, sometimes a few minutes etc.  The drives also unmount themselves even when no data is being transfer and again this happens at random (sometimes after 5-10 minutes).  Also the drives re-mount automatically if they unmount themselves as well as if I manually unmount them.
    The computer I'm using is a new iMac 27" (Late 2013) 3.5 GHz i7 running OSX 10.9
    I've been trouble shooting the issue by:
    Restating the computer (Have you tried turning it off and on again!)
    Reformatting the hard drives again (Mac OS Extended Journaled (but haven't tried any other formats)
    Only having 1 hard drive in the enclosure at a time
    Trying the hard drive number 1 in bay 1 and bay 2
    Trying the hard drive number 2 in bay 1 and bay 2
    Connecting the enclosure to different usb ports
    Different usb 3.0 cable
    Disconnecting all other peripheral devices like other hard drives (except keyboard and might mouse)
    Copying data from the iMac fusion drive as opposed to data from another external usb 3.0 hard drive.
    And now for the kicker!  I then tried connecting the stardom to my new 13" retina MacBook Pro with no issues at all.  The drives work perfectly.  Data was able to be copied to them and when you manual unmount the drives they don't re-mount themselves.
    Anyway hopefully someone might be able to help me out or has come across a similar issue before
    Cheers
    Troy.

    Thank you for your reply. The drive does come up in the Disk Utility after I reboot and connect the cable. You can click on the hard drive in Disk Utility and it indicates the volume (drive size). If you try to partition the drive the spinning wheel displays and it doesn't appear to do anything but lock up Disk Utility and it needs a Force Quit to close. Disk Utility displays the drive as 232.9 GB LaCie Group SA and below that text it says disk3s3 and is greyed out. I have tried to erase and partition the drive but the Disk Utility locks up. Is there a way to get disk back to its original factory install condition so I may attempt to format it? Is there a UNIX disk utility that could force an erase and partition? Thanks for your help.

  • Iphoto and external hard drive issues

    I have backed up my Iphoto onto an external hard drive and then upgraded my iphoto and can't access any photographs. How do I restore my iphoto library from the external hard drive?

    There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

  • Time Machine backup & External Hard drive issue

    Hello,
    I have a MBP running Snow Leopard. I use two external Hard drives for Time Machime backups. The first one Seagate2TB is working with TM just fine. 
    The second one Seagate3TB worked with TM just fine for about a year until two days ago. Since two days ago, TM doesn't backup any new data (or file changes) anymore to this 3TB drive. It back's up only a few kb and cleans up, while it should backup at least 200Mb that I just uploaded to my MBP.
    Here are two (maybe) useful additional info:
    - I used disk utility to verify this 3TB hard drive and it returned okay. I also use this 3TB hard drive to backup a different Macbook and it still works just fine. 
    - At the same time, my TM woks on my other 2TB hard drive.
    Can someone please let me know what the issue is and how to fix it?
    Thank you very much.
    PS: These hard drives are connected to my MBP via a USB cable not time capsule.

    thanks for the suggestions -- actually, the "real" issue is that my technophobe spouse needs the "documents" file backed up. TimeMachine "should" work --does not. And because working from dropbox (which is a great idea and already installed) would mean opening up a file other than "documents" - it would cause such anxiety, I was hoping to write an apple script to back up the file daily to someplace else without me having to physically do it myself.
    Here is what I am trying --I will put the entire folder on DB and then create an alias (that looks like the same title as the original) and leave that on the computer -- I wonder if that will work?! 
    Or maybe I am confused. I thought I needed to work from the document in DB in order for it to sync there...
    Thanks again for the ideas!

  • Time Capsule/External Hard-drive issues

    Hello - I'm thinking about investing in a Time Capsule mainly to back-up my data and in particular the massive amount of photos (34,000) that I think are slowing this machine down! I just wanted to ask once I have the photos on the Time Capsule am I able to delete them from my hard-drive?
    As an aside, I do have a couple of WD Hard-Drives but I amhaving issues with them in that I cannot get into the hard-drive. This has happened around the same time that I updated to OS X 10.9.2. I did read online that others were having issues with this too. Im not quite sure what to do as having spent the money on these hard-drives it's a little disappointing to have to consider buying a new external hard-drive - although probably a very worthwhile investment. Anyone having this problem too?
    Thanks for your advice in advance it is much appreciated.

    Since you have an iMac my advice would be to buy 2 external drives.  Now you can decide to move some of your data off your iMac to one of the drives for archiving and then use the other drive as a Time Machine backup of both the iMac and the archive.  You don't want a solution that has key data sitting on a single drive.
    But...before you buy two drives, I must ask.  How much space are you using currently on your iMac.  Just having 34000 pictures won't slow down your machine unless it is running out of space.  Are you running out of space?  If you aren't, then a single large drive to backup your iMac is sufficient.  Just don't delete the photos so you have a redundant copy of each.
    Finally, I personally don't like backing up over wifi unless with a notebook.  You have an iMac, a dedicated drive for backup should not be a problem behind that big screen.  It will be more reliable than a wifi backup and a heck of a lot faster.

  • Serious Audio Problems/External Hard Drive Issues?

    I have a hard drive that I imported about 40 hours of footage into using iMovie HD a few years ago. I am now trying to import all of that footage into a new external hard drive using iMovie '09. I set it up and imported it correctly, but for some reason the audio has all disappeared. The audio is still there in Quicktime, but it didn't transfer over into iMovie. Is there anything I can do to solve this?
    The way I first tried to solve it was by dragging the Quicktime clips to my desktop, then importing them back into iMovie. It worked for a little while, but for some reason at about the 20 hour mark it decided to drop all the audio out of those clips as well.
    Then, I decided I would get wise. I said, "Screw it. I'm just going to re-import the whole 40 hours from the original mini DV tapes." So I set my camera up and started importing them. Everything was going swimmingly until about the 20 hour point again. And that's when the audio decided to drop out on me all over again. I was HIGHLY frustrated, and am still at a loss on what to do.
    Does anyone please have any solutions for me? I would desperately like to get this footage imported into iMovie '09.
    Thank you,
    Aaron
    P.S. I don't know if it means anything, but a couple of the clips that were imported have green and purple pixelated lines running down them. Could there be an issue with some of my mini DV tapes as well that's causing the audio drop out?

    Hi, try the following:
    select the external HD in the finder and press >cmd-i<
    unlock and make sure you are the owner
    now choose >Apply to enclosed items……<
    Have a nice day!

  • External Hard Drive Issue - Jumbled Files!

    Hi all,
    I've been having a problem with my external hard drive jumbling files. This has happened to me on two different computers and with two different external hard drives, so I know it is not an isolated issue. Let me explain:
    I notice the problem most when I am recording in Logic. I will save a song with the files all on the external drive. Then, when I go to open the song later, some sound clips have different clips in the spot where they were supposed to be! For instance, A file might have originally been named "Sound Recording #24" and it says the same thing above the waveform in Logic, but it now has a different clip inside of it!
    So then I go to the finder and bring up my external drive, and here's where the crazy part happens. I click my audio files folder and see my list of audio files. but once I click on the track 24... it instantly switches to a different file name! It only happens with certain files, but when I click it, they switch instantaneously to something else! It is bizarre, and is almost as if the data is jumbled on the drive so it can't figure out what I'm clicking on!
    This is making me really nervous because it is ruining audio projects that I have worked very hard on! It has been doing this on my Intel MacBook as well as my G4 Quicksilver. I had the same thing happen with both a Western Digital MyBook drive, and a Maxtor drive.
    Has this happened to anyone, and does anyone have a solution?
    Thanks,
    Nate
    MacBook and Power Mac G4 Quicksilver   Mac OS X (10.4.8)  

    If the errors occur only while using the Logic it may just be application specific - try posting in this forum as well...
    http://discussions.apple.com/category.jspa?categoryID=156

  • External hard drive issue (lacking permissions)

    Have a 1TB WD MyPassport external hard drive that I am not able to fully access (lacking permissions). I have tried to change this thru the "get info" and "Sharing & Permissions" tab, but it says "You can only read." This HD was formatted on Windows in NTFS and needs to still be accessable on Windows-based computers (home & work). Can I make it available on my newly purchased Mac too?
    This HD has over 400GB of work-related data and must not be adapted in a way that jeapordized me from using it on a federal government computer, since I am in the Army.
    Any solutions?

    Thank you for your reply. The drive does come up in the Disk Utility after I reboot and connect the cable. You can click on the hard drive in Disk Utility and it indicates the volume (drive size). If you try to partition the drive the spinning wheel displays and it doesn't appear to do anything but lock up Disk Utility and it needs a Force Quit to close. Disk Utility displays the drive as 232.9 GB LaCie Group SA and below that text it says disk3s3 and is greyed out. I have tried to erase and partition the drive but the Disk Utility locks up. Is there a way to get disk back to its original factory install condition so I may attempt to format it? Is there a UNIX disk utility that could force an erase and partition? Thanks for your help.

  • Please Help - Time Capsule and External hard drive Issues

    Recently, I switched from Comcast to AT&T uverse as my internet provider and I started experiencing problems.
    (1) I have a 4th generation Apple Time Capsule which I am using as my router.
    (2) Connected to the Apple Time Capsule - USB - is an external hard drive (not for backup with Time Machine.)
    (3) I have a 2011 Macbook pro which I use to access my file on my time capsule and external hard drive.
    (4) I had been using my AT&T portable Hotspot from my cell phone to get internet access on my MacBook pro from remote locations to gain access to my external hard drive which is attached to the time capsule.
    (5) On August 2, 2014, I switched from Comcast to AT&T and had the AT&T turn off the router function. (I have been using the router from my apple time capsule)
    (6) Under Network I switched to bridge mode.
    (7) And since August 2, 2014 my time capsule has not been backup.
    THE PROBLEM - I need to be able to use the hotspot function from my cell phone to gain access on the external hard drive using my MacBook Pro which I was able to do before. Now it is showing time capsule under finder but unable to connect.
    Do I need to reset my Time Capsule since I have a new service provider. Everything else works fine - meaning able to get internet signal but unable to access my external hard drive and backup my time capsule. Please HELP.

    (5) On August 2, 2014, I switched from Comcast to AT&T and had the AT&T turn off the router function. (I have been using the router from my apple time capsule)
    (6) Under Network I switched to bridge mode.
    (7) And since August 2, 2014 my time capsule has not been backup.
    If you got ATT to turn off router function in their modem..
    Then 6. is wrong.. You cannot have the Network switched to bridge mode..
    You must have it set to dhcp and nat.
    That is also why you cannot backup.. the TC is off the network.
    Please change back to router mode in the TC.
    Ensure the internet tab shows dhcp and you create a wireless network.
    Then power down the TC... power down the ATT modem.. wait about 20min (you can try 5min.. but it might not be long enough).
    Power up the ATT modem.. wait 2min for things to flash lights in de right blinkin order.. then start the TC.
    Open the airport utility and make sure your TC captured the public IP and is now working as the router.
    That should fix that end of it.. the hotspot end??
    Tell us what happens.

  • External Hard Drive issues- Transfering data from NTFS to Mac

    Hi. I need help deciding the best way to get my files from my NTFS external hard drive to be read/write able on my Mac Laptop (late 2008 macbook, 13inch). I know I need to reformat both of the NTFS external drives I own to either FAT32 or Mac OS (journaled), however I am unsure what the best way to do this.
    The apple Genius told me to do the following:
    Using my Windows running laptop, copy data from NTFS drive to a safe place on PC.
    Reformat drive to FAT32
    Copy files from windows running laptop back to hard drive.
    This sounds great, but I have been warned that FAT32 has many limitations. I have 66 GB of music and photos on the drive.
    Clarifaction of what the limitations with FAT32 are, and any advice is greatly appreciated. I mean, how do people switch their data from PC to Mac? There has to be an easier answer.
    THANKS!

    Hi Kassluv17;
    Before we can tell you the best solution, you must tell us where you wish to end up. Do you plan to migrate over to the Mac and have nothing to do with the PC in the future or are both a Mac and a PC in your future.
    Allan

  • ITunes Library on an External Hard Drive issues

    I've read hundreds of forums, but none of them discuss my problem in a way that's at all related to mine.
    I have two external hard drives for my iTunes library. I have iTunes set up to read everything from the two external hard drives, and it works fine...until the external hard drives get disconnected somehow. Sometimes when I hook up my iPod, they just get disconnected and come back a few seconds later, but by that time, iTunes has lost all the links to my thousands of files.
    What is the simplest, easiest way to keep iTunes from losing those thousands of links. I have a TON of TV shows that I made myself that I HATE having to put into iTunes again and again and again and having to convert from Movie format to TV format.
    I know there's a simple way. People talk about doing it all the time, but none of them seem to have linkage problems like I do. I'm getting so tired of having to destroy my entire iTunes library and rebuild it from scratch every day.

    The article Zevoneer linked to has a very good explanation of the porcess.
    One thing it dos NOT mention, is that you should assign a permanent drive letter to your exHD before you start moving/consolidating anything to it. Windows has a nasty habit of changing drive letters unless they are permanently assigned, like when you plug in a digital camera, it could change your exHD's letter and mess up itunes finding your songs.
    Use these directions and the further down in the alphabet, the better. Like M: for music.
    http://support.microsoft.com/kb/307844

  • External hard drive issues. Please help!!!!

    hey everyone!
    I have a 500GB external hard drive and I've just plugged it in via the USB as I normally do to do some work.
    I just had a message come up saying *"the disk you inserted was not readable by this computer"* and the options 'intialize' 'ignore' and 'eject'.
    I really don't what to do or where to start.
    Any help would be amazing!
    Cheers
    Righini

    What kind of HD 2.5"/3.5"?
    How has that HD been formatted MAC/WIN/Linux?

Maybe you are looking for

  • Error: Not possible to post down payment clearing.There are no down payment

    Hi expert, I am running a settlement for an internal order and encounter the following error message. "Not possible to post down payment clearing. There are no down payments." Message no. AA571 When checked on the vendor, the invoice has been cleared

  • Calendar events on lockscreen

    I am looking for what I would think is a simple app, but cannot locate it. I used to use a program calendar lockscreen in cydia on my iphone. I went to a razr this last weekend, tired of fighting with apple over what I can put on my phone. but lookin

  • HT2822 Setting up date and time is taking forever and failed to do it automatically or manually.

    Hello: When I tried to configure my new Apple TV for some reason it kept trying to set the date and time automatically but wasn't able to. I tried to do it manually but couldn't do it either. When I tried to skip this part and log into my iTunes acco

  • Changing timing on a group of stills

    HD 6.03 is not updating the length of my stills in groups... I have to do them one by one. Occasionally using the "Show Photo Settings" slider works, but usually not. What's going on? 2.33 ghz dual core Intel Imac   Mac OS X (10.4.9)  

  • Recalling my vi

    I am trying to create a vi that performs error checking on certain values. If the values are false I present a pop-up message asking the user to re-enter the values. How do I create this recursive function?