External hard drive movies won't play on apple tv

I recently purchased an Apple TV unit.  Plugged it into the sony TV HDMI input.  It sensed the existing wifi I wanted to use.  Set up home sharing.  Etc. 
I recently started copying some old digital video tapes via my iMac to an external hard drive.  After reading a few blogs, I imported into iTunes what I thought were the digital home movies from my external hard drive.  I then went back to my living room and chose "computers" and then "movies" and low and behold they were there with the correct running times etc.  When I chose the home movie I wanted to watch it won't play.  Is there some setting that I am over looking?
Sort of weird that I can see the movie selection with a picture (basically the first frame of the video) but can't play it.
Any suggestions would be very helpful.  I've tried to figure it out myself, but not knowledgeable about how this mac works I suppose.  Any help would be appreciated.
Monte

Welcome to the Apple Community.
Which Apple TV do you have.

Similar Messages

  • I have purchased itunes tv series, movies and music and have transferred them onto an external hard drive and tried to play them on my tv on a media hub.  The file will not load.  Is there some form of blocking by itunes or another p[roblem and how d

    I have purchased itunes tv series, movies and music and have transferred them onto an external hard drive and tried to play them on my tv on a media hub.  The file will not load.  Is there some form of blocking by itunes or another p[roblem and how do I fix it?

    You can't fix it.  iTunes bought content is DRM protected. so it can only be played on authorized devices.  i.e devices associated with the apple Id used to purchase the content.  Its copyright protection that the rights owners demand.
    Circumventing it, is illegal in most countries, and as such cannot be discussed here.  If you want to play the content you'll need to connect your computer directly to your TV, or use some other device you can authorize for iTunes content such as an iPad, iPhone , iPod touch or Apple Tv.

  • I perviously transfered all my iTunes music to an external hard drive. But now when I connect the external hard drive and try to play a song, I get an error message saying that I need to "locate" my music. I don't how to find it on my external hard drive.

    I perviously transfered all my iTunes music to an external hard drive. But now when I connect the external hard drive and try to play a song, I get an error message saying that I need to "locate" my music. I don't how to find it on my external hard drive. Please help for I am not that computer savy and don't want to mess anything up.
    Thanks! 

    I called Apple Support and they walked me through it. They told me to basically copy and paste my music to the external hard drive. (I think.) Or maybe it was they had me transfer a folder to the EHD. I don't exactally remember it was a few years back. But I tried to plug in the EHD before starting and...nothing. Still says same thing, "locate file."

  • Due to a broken laptop I've loaded my itunes from an external hard drive my itunes wont play unless i leave the the exteral hard drive connected. what is the problem?

    My laptop working Vista H Premium broke, I now have laptop working Mindows 7 H Premium. I reloaded my itunes from an external hard drive but they wont play without the external hard drive left plugged in

    The media is on the external drive.  If you want to be able to play it with the extrenal drive disconnected, this will require moving or copying the media off the external drive to the computer's hard drive.
    Importing the media via iTunes may automatically accomplish this, depending on the settings in iTunes.

  • Exported videos to external hard drive, now videos will play? in .mov mode

    Hi,
    I bought a WD My Passport for MAC.  I exported all of my videos (I still have the videos iPhoto, they aren't deleted yet.) into the external hard drive.  All my videos are in .mov format, and will not play on my computer when I click to play.  It shows that there is 0:00 time and will not play.
    Am I supposed to reformat my videos to another file extension? Getting confused and scared, because I bought this hard drive intially for my videos and if they aren't playing, not sure what I am supposed to do, did I just waste $100?
    HELP!

    Okay, I tried to export -> Original Kind and it seems to have worked!
    I played back the original video, and it opened up quicktime and played exactly the entire video!
    You may have saved me from lots of lost videos, THANK YOU A MILLION TIMES!
    I am definitely going to note this for future exporting of videos!

  • How do you transfer movies from macbook to a external hard drive it won't recognise

    how do i transfer movies from macbook to a external hard drive? it just wont recognize

    So your MacBook Pro is a 2012 model (I'm assuming since you only bought it a week ago!)?
    There are some known issues with the USB 3.0 ports on the 2012 models where they do not recognize USB external drives. This tech note may be of some help - http://support.apple.com/kb/HT5172#12.
    Some people that are using pre-release versions of Mountain Lion, to be released in the next couple of weeks, have written here that their USB 3.0 port problems are 'fixed' with the new version of OS X 10.8.
    Try the Apple FAQ first and if that doesn't solve your problem, you may have to wait a couple of weeks to see if 10.8 does.
    Sorry,
    Clinton

  • IDVD 08 / external hard drive not burning or playing DVDS?

    Hello, my computer does not have a Superdrive so bought a CNM Ultra Slim-line Portable External DVD-RW Drive, so I could burn DVDs on my computer, was told the external DVD drive and the blank DVDs I bought were compatible with computer. When I plug in the external dvd drive to the USB port, with the blank DVD in the external drive, the computer recognizes it and a message comes up with the options to go to iMovie, iDVD etc. When I am on iDVD and then want to burn, it does seem to burn, but there is no noise coming from the external drive, and at the end of the burning, when I put the DVD in to my DVD drive by my television, it just says ''ERR disk.''
    When I put in a regular movie DVD into the external hard drive to see if it would play, the noise was there from the external hard drive, and the movie name came up on screen with a disk icon, but then a message came up saying, ''There was an initization error valid dvd drive could not be found -70012.''
    Help!

    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBOHCI
    PCI Device ID: 0x0026
    PCI Revision ID: 0x0000
    PCI Vendor ID: 0x106b
    Bus Number: 0x18
    USB Receiver:
    Product ID: 0xc501
    Vendor ID: 0x046d (Logitech Inc.)
    Version: 9.10
    Speed: Up to 1.5 Mb/sec
    Manufacturer: Logitech
    Location ID: 0x18100000
    Current Available (mA): 500
    Current Required (mA): 50
    Does this mean I do not have USB2? If so, is that why the external DVD driver will not burn DVDS or play DVDS? If so, how can I change the USB ports to USB2?
    On the description of the external driver it does not say anything about needing USB2 ports for it to operate: http://www.currys.co.uk/gbuk/cnm-ultra-slim-line-portable-external-dvd-rw-drive- 02553194-pdt.html
    Message was edited by: abyssinia

  • I recently restored my laptop and also iTunes from an external hard drive, but when I play songs, it says the original file could not be found. How do I locate and fix this?

    I recently restored my laptop with Windows 7 and imported my iTunes library from my external hard drive. When I try to play songs, it says it cannot and that the original file could not be located. How do I fix this?

    Put the files back where iTunes expects them to be.

  • HELP. External hard drive suddenly won't show up on Mac.

    So, I left for a few minutes and when I got back, there was that warning on my screen that said the disc wasn't ejected properly, etc. Which was weird because the drive was still plugged in fine. Anyway, when this happens, I usually just pull the hard drive out then plug it back in and it works fine but now it won't show up on the desktop or on the disk utility I got it to show up on disk utility once, but the subheading under the hard drive was greyed out. I could click it but when I tried to run Verify or Repair, nothing would happen. It would show up on the history as "repaired disc" but NOTHING. And I am honestly freaking out Please help, anyone

    I'd have to agree with WZZZ. That sounds like either a bad connection, bad cable, or faulty supply. The port could be bad as well but the cable either being bad or not properly plugged in or maybe even worn out. When the "disk ejected" message shows up it's usually because somehow the cable was yanked out of the system while it was plugged in. Intermittenet connections in the cable, particularly in supply lines between the drive and the unit can cause this to happen as well...it's as if you unplugged the external hard drive from the system for a very short time, but the system still picks it up and sees it as bad.
    If worse comes to worse, download the hard drive troubleshooting book in the downloads section at:
    http://scsc-online.com

  • Transferred library to external hard drive, iPod won't recognize

    2 problems:
    1. My Shuffle won't accept songs from iTunes now that's in on my external hard drive.
    2. When I hook up my regular iPod, it says something to the effect of "a new library has been detected, do I want to import?" Do I?

    didn't know about the 'Consolidate Library' step.
    http://docs.info.apple.com/article.html?artnum=305451
    hope this will help others.

  • External Hard Drive Enclosure won't mount

    Hi
    I have a Western Digital Caviar WD3200JD 1TB SATA hard drive inside an external startech enclosure
    http://www.startech.com/item-download/SAT3510U2B-35in-USB-to-SATA-External-Hard- Drive-Enclosure-with-One-Button-Backup.aspx
    It won't mount on my mac, it won't recognise it in disk utility either
    I mounts fine on a PC running Vista. I have formatted it as NTFS but it will still not shoe on my mac
    Anything else I can try?
    Thanks!

    my 12 inch powerbook laptop body was no good, but the hard drive was. I had a powermac g4 tower with a bad harddrive. After researching, I found this site and I mounted the laptop harddrive into the desktop and boom! my old laptop drive booted up on the desktop powermac. here is the link. a 3 yr old can install this it is way too easy, plus it cost 99 Cents. way cheaper than buying an enclosure.
    http://www.b2cshop24.com/en/hard-drive-ide-25-to-35-adapter-converter-for-laptop .html

  • External Hard Drive - Movie Transfer

    I have an Intel iMac and wish to move the movies and music I have in ITunes to a WD 2TB MyBook Studio External Hard Drive, free up my hard drive and still use iTunes.
    I have read a couple links to instructions but it really does not compute in my head.  Moving, deleting, finding... blah blah blah.   What is the easiest way to move movies (for a simple minded person) to the external drive and then wipe them off my computer to free up space without making it such a nightmare as it seems.

    Quit iTunes.
    Copy the entire /Music/iTunes/ folder to the external.
    Hold Option and launch iTunes.
    Select Choose library.
    Select the iTunes folder you moved to the external
    That is all you need to do.
    iTunes will use the external for everything from now on.
    You can now safely delete /Music/iTunes/ folder on the internal (Macintosh HD).

  • External Hard Drive (160GB) won't mount?!

    Hi focus,
    I am new in MAC OS and I had some difficult to MOUNT my External HARD Drive in MAC OS TIGER 10.4.10 (all updated).
    My MAC simply does not recognized my external HD, but recognize when I am using a Virtual machine (Fusion VMware) and running Windows XP. I already try to format in differents formats, FAT/FAT32/NTFS/EXT2 but nether recognize them.
    So I ask, there is some "restriction" to mount external IDE drives? I try to use disk utility or ipartition or SupperDuper and no one recognize automaticly.
    My original HD was partioned in 2 parts (by me) one for the system 38 GBs and other one 79 GBs for my musics and documents.
    If someone has any ideias why this is happen, please help me to solve this problem. Because I need to backup all my data (no actually bootable stuffs) in this external.
    Thanks,

    Thanks A Brody,
    But how can I format my External HD if my MAC can not recognize, even in disk util or ipartition. I think the partition Magic (for windows) can do that, but can not.
    So I think, now, the Mediafour MacDrive can do that, is that real? I am Downloading one version from web and I will try in a second. For me is not a problem format in mac format and read in windows within this software, but the problem is recgnize to format in macformat.
    I run windows in virtual machine and now I already Install this Macdrive, but does not work, I can not format my external drive with this software. Well I read more and more discussing foruns and also saw you tube videos about formating in mac and it is not a big deal, its should be easy, first of all if mount my external drive to just starting talking about that stuff.
    I will get some other "interface" more modern and try to recognize, if do so, maybe I bougth other USB interface. But for now It is to hard stuff has an external 160GB harddrive to backup stuffs.
    Thanks and if some one has other suggestion it is always welcome!

  • My external hard drive suddenly won't mount.

    I have a mac 0sx version 10.5.8.  My WD hard drive suddenly won't mount.  Tried running a repair with disc utility-no luck.

    Your best bet is DiskWarrior...
    http://www.alsoft.com/DiskWarrior/

  • External hard drive icon won't appear on desktop

    Apparently spontaneously (has worked fine in the past!) I cannot get a desktop icon for my La Cie external hard drive to appear. I can see the hard drive in Desktop Utility and can eject it through there but the verify and repair options aren't highlighted.

    I hear it spinning- I think?
    That may not be so good because it suggests the power is getting to it and it is something else more critical to the functioning of the drive that is wrong. If it is the enclosure you could try moving it out of the enclosure into a different one, or into the computer.
    I just used Disk Warrior to rebuild the directory- no luck.
    Ah, so did Diskwarrior see the drive? I didn't think you could see the drive in Disk Utility.
    I also replaced the firewire Cable- no luck.
    Good try but the flashing blue light suggested something else to me.
    I'm now doing to bring it to a local Computer Store to try to retrieve the information.
    Try using an application such as [Data Rescue II|http://www.prosofteng.com/products/data_rescue.php] or [FileSalvage|http://subrosasoft.com/OSXSoftware/index.php?mainpage=product_info&productsid=1]. Both have free trial versions that let you see if the software will help before you decide to buy. You will also need a second hard drive equal to or larger in size than your first drive.
    I wrote to Lacie- but they are so slow in responding- it will be days.
    Ummmm....

Maybe you are looking for

  • Jabber for Windows Install

     We are deploying Jabber for windows for a customer.  Without any jabber-config.xml uploaded the users are able to login without issue and they can search the corporate directory, get images....etc. The issue is the at the ipphone field is where the

  • How to delete or activate the deletion flag for the sales order line item

    Hi All, I  have one Cust order & with referance to that cust order one production order is created . The production order user has done the Goods issue with 261 movement type  & GR wi 101 before 4 months back , & he has reverse  the GR  with 102 on t

  • Does Front Row update playcount (and other attrbutes) in iTunes?

    Excuse this question please which I could theoretically test myself, just don't have the resources at hand right now to try it out: As I understand FR under Tiger uses iTunes to play music. So logically any smart playlists based on 'last played' or '

  • Garbage characters in german admin pages after update to 3.0

    After Update to 3.0 there are garbage characters display instead of German special characters (äöüß ...) looking like ... " löschen " or "Unterstützende Objekte" In the applications these characters displayed correctly -even the Buttons ... - only

  • KPT Filters For Photoshop

    I've already asked Corel about this with no results. I've been using KPT filters with Photoshop for years. I bought a new Mac Pro and discovered my version of PS wouldn't work so I upgraded to PS CS 3. The only filters that won't work are the KPTs. I