External hard drive no longer shows up on Desktop

Hi everyone,
I did what a good person should do with a tech issue and did a long search through forums before I resigned to bothering you all with it.
I've had a 500GB Seagate FreeAgent GoFlex Media external hard drive for 6 months which up until this week, was showing up as an icon on my Desktop. I had named it Eid HD.
I suddenly am unable to access this drive on my MacBook Pro. The Desktop icon has disappeared but the drive still lights up as per normal. I'm using OS X v10.6.8
I tried changing USB cables.
The drive appears in Disk Utility as follows (the yellow icons):
I read somewhere that I needed to mount it. The first yellow icon doesn't have the mount option. The second one (Eid HD) has the option but when I mount it, I get the following message:
Mount Failed.
The disk “Eid HD” could not be mounted.
Try running First Aid on the disk and then retry mounting.
I verified and repaired (First Aid) the disk. Results:
Tried to mount - same error message as above. Mount failed.
I downloaded Disk Warrior and although the drive appears in there, I can't do anything with it. The Graph and Rebuild buttons are both greyed out.
Does anyone have any ideas about how to fix this?
The files are still on the drive as I used it on a Windows machine to test it.
I don't want to format it.
Please help if you can, thank you in advance.
Sam

I verified and repaired (First Aid) the disk. Results:
That quote is from your first post.  But I have some questions about that (maybe just to satisfy my own curiosity).
1.  When you ran Disk Utility First Aid did you do it on the disk itself (the one that is enabled with the Seagate title)?
2. That First Aid window title line says "First Aid: EID HD" yet my DU window title only shows the name exactly as it appears in the left panel, no "First Aid:" prefix.  So is that a change in 10.6.8 (I use 10.6.5)?
3. You display shows lines like "Verifying folders", "Folders verification completed", and "Verifying $...".  Again I have never seen DU display that kind of info.  Another 10.6.8 change?
As I said, I am only curious.  It may not mean anything.  But I thought I would point out these details just in case.
If these aren't 10.6.8 changes (I find it hard to believe apple would change DU after all these years just from 10.6.5 to 10.6.8) then just what DU First Aid were you running?

Similar Messages

  • External Hard Drive no longer showing in Devices

    My external hard drive no longer shows up as a device on my MBP. It has worked fine since the day I plugged it in.
    The Time Machine is using the HD, and continues to do it's backups, so power and USB connection is not an issue
    The HD shows up in Disk Utility (The Time Machine portion AND the partition that I've been using for storage)
    I ran a repair on the partition in Disk Utility and it checks out OK
    I can access this partition from VMware Fusion, so the windows side of the MBP sees it, and it's operational
    Used the HD all day yesterday without issue
    I've restarted the MBP to see if it would find the HD partition after a restart, it doesn't
    I've unplugged (USB) and powered-off the HD, and when I power-on, it still isn't seen.
    Any ideas?
    John

    If TM is turned on and it still doesn't show up then do a SMC reset.
    SMC RESET
    Shut down the computer.
    Unplug the computer's power cord and ALL peripherals.
    Wait 15 seconds.
    Attach the computers power cable.
    Wait another 5 seconds and press the power button to turn on the computer.
    PRAM RESET
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • External hard drive no longer shows up connected

    I have been using a Seagate Freeagent 500 GB external HD as a backup storage device for my Windows 7, 64 bit computer. After working well for several years it did not respond the last time I tried to back up and shows up as "disconnected" when
    I search for the HD in device manager or control panel.  It was assigned Drive I but that drive no longer shows up under drives.  I have tried different USB ports without success. Oddly, the audible signal sounds when I remove the USB cable from
    a port but does not sound when I reinsert it.  I also tried powering down the hard drive and powering up again without success.

    Hi,
    If other PCs can show this external hard drive, You can try the following steps to clear the write-protected flag to see what's going on:
    Open a command with administrator privilege:
    type--> diskpart
    type--> list volume
    type--> select volume #
    type--> attributes disk clear readonly
    Kate Li
    TechNet Community Support

  • WD MyBook External Hard Drive No Longer Showing Up

    After the Yosemite update, I can no longer see my Western Digital MyBook external hard drive when I plug it into my MacBook. I've been up and back between Apple Support and the WD support forums for about three weeks now and I'm not seeing anything helpful about this situation. I cannot access a bunch of stuff because of this problem. No one is saying whether or not it will be addressed at all let alone supplying a solution... Does anyone have any info at all about this?

    If TM is turned on and it still doesn't show up then do a SMC reset.
    SMC RESET
    Shut down the computer.
    Unplug the computer's power cord and ALL peripherals.
    Wait 15 seconds.
    Attach the computers power cable.
    Wait another 5 seconds and press the power button to turn on the computer.
    PRAM RESET
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • External Hard drive no longer showing up

    Hi all,
    hope you can help.
    I have an external hard drive that I use as a TIme Machine Drive, the other day my wife decided I was wasting electricy by having the hard drive on, si se turned it off without ejecting it, thanks love.
    Now the Hard drive wont show up on the desk top, I've ched the system preferences ans that's set to show extrernal hard drives.
    Profiler shows the USB hard drive as there.
    Disk Utility shows the hard drive, Wrong name but the right serial number. but it wont let me repair, erase or partition.
    Suggestions on how to get this fixed would be epic, I'm guessing that my iMac just didn'y like it when the drive wasn't ejected correctly, I'm hoping there is away to sort the problem without replacing the drive.
    Thanks guys.
    Dave

    If TM is turned on and it still doesn't show up then do a SMC reset.
    SMC RESET
    Shut down the computer.
    Unplug the computer's power cord and ALL peripherals.
    Wait 15 seconds.
    Attach the computers power cable.
    Wait another 5 seconds and press the power button to turn on the computer.
    PRAM RESET
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • HT201250 my external hard drive no longer shows up

    I use a LaCie external hardrive for my Time Machine backup on my iMac..  Since October 24th 2012, my Imac no longer recognizes my LaCie..., and in fact no external hard drive is recognized.  When I open up Time Machine it asks me to set up another Time Capsule.??  Has somethingchanged either in the operating system [OS X 10.7.5] or with iCloud that would be affecting this?  My La Cie turns on and sounds like its working, and I have checked the power supply.

    Hi baltwo and Miacc,
    I also have a LaCie ext HD of 1T and OS 10.7.5. Since Dec 24th 2012 I haven't been able to mount the LaCie disk. I can see it in the Disk Utility but I cannot mounted. I verified the disk and even repaired it but nothing has happened, actually there is nothing wrong with the disk, but it cannot be mounted.
    I did what you suggested baltwo but I'm in the same situation as before. I cannot mount the disk and/or do Time Machine.
    Any suggestions?

  • IMac external hard drive will not show up on desktop

    I have an external 60 GB hard drive that is attached to an IMac.
    I used to be to access this hard drive, but now the IMac will not see it and it does not appear on the desktop anymore. I have another Mac computer and have hooked this hard drive up to it, and it shows up just fine on this other computer's desktop, so I know the hard drive should be working.
    What should I try doing to get this hard drive show up on the IMac?

    Is the drive connected via USB or Firewire?
    USB and FireWire Quick Assist
    http://support.apple.com/kb/HT1151?viewlocale=en_US
    What to do if your computer won't recognize a FireWire device
    http://docs.info.apple.com/article.html?artnum=88338
    Dealing with FireWire problems (drives not mounting, devices unrecognized, etc.)
    http://www.macfixit.com/article.php?story=20041221081432908
    Common fixes for USB device issues (unrecognized, etc.)
    http://www.macfixit.com/article.php?story=20070824012114701
     Cheers, Tom

  • Why do my external hard drives no longer show up on my desktop?

    I have three external harddrives all of which are connected through different ports, all show up in finder, all show up in disk utility, but none of them will show up on my desktop. I looked at a few other posts similar to mine but the answers given to other problems have not worked. There is no way all three of my cords are causing a connection problem and I have repaired and verifyd all the drives and still nothing. Any ideas?

    Are the disks self powered? Try a SMC Reset:
    SMC RESET
    http://support.apple.com/kb/HT3964
    Shut down the computer.
    Unplug the computer's power cord and ALL peripherals.
    Wait 15 seconds.
    Attach the computers power cable.
    Wait another 5 seconds and press the power button to turn on the computer.
    The 5 second timing is important to a successful reset.

  • Catalogs,my external hard drive used to show up as its own folder in my folders but for some reason it now showers up as an extension of my internal HD for my Mac . In finder it shows my External drive is a folder called volumes, along with my Mac hard dr

    For some reason my external hard drive no longer shows  up as its own folder, instead it shares a folder named volumes with my Macs HD, whats the best way to move it.?

    I have the same problem.  Let me know when you find a fix.

  • My external hard drive will not mount on the desktop?

    My external hard drive no longer mounts on my desktop, the hard drive has been checked & is working-has anyone ideas?

    Hello cuckoo55,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Mac OS X v10.6: How to show your hard drive icon on the desktop
    http://support.apple.com/kb/HT3746
    In the Finder, choose Preferences from the Finder menu.
    Click the General icon on the toolbar.
    Select "Hard disks" in the "Show these items on the desktop:" section.
    Close the Finder Preferences window.
    Best of luck,
    Mario

  • I have a MacBook Pro, 10.10.2 Yosemite. My external hard drive no longer appears on my screen or in Time Machine

    I have a MacBook Pro, 10.10.2 Yosemite. My external hard drive no longer appears on my screen or in Time Machine. I have gone into Disc Utility to repair disc, and get the message: Error: Partition map check failed because no slices were found. I was trying to follow Melophage's instructions by going into "Terminal" and entering  "diskutil list; diskutil cs list; mount"  and "diskutil info disk2."  Then I entered the command "sudo got show disk1."   I am sure I have made the problem worse. Can you give me some help?  Thank you. blelambert
    Last login: Wed Mar 11 19:23:03 on ttys000
    ~ belambert$ diskutil list
    /dev/disk0
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *251.0 GB   disk0
       1:                        EFI EFI                     209.7 MB   disk0s1
       2:          Apple_CoreStorage                         250.1 GB   disk0s2
       3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
    /dev/disk1
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:                  Apple_HFS Macintosh HD           *249.8 GB   disk1
                                     Logical Volume on disk0s2
                                     7A998EAE-68FB-4BAC-BF40-7A31D2806B2C
                                     Unlocked Encrypted
    /dev/disk2
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *2.0 TB     disk2
       1:         Microsoft Reserved                         134.2 MB   disk2s1
    ~ belambert$ diskutil cs list
    CoreStorage logical volume groups (1 found)
    |
    +-- Logical Volume Group 883A56F4-5559-4872-A8DA-960F99655B63
        =========================================================
        Name:         Macintosh HD
      Status:       Online
        Size:         250140434432 B (250.1 GB)
        Free Space:   8921088 B (8.9 MB)
        |
        +-< Physical Volume 7EDAFA20-FF9A-45FB-BA44-6526BB46C381
        |   ----------------------------------------------------
        |   Index:    0
        |   Disk:     disk0s2
        |   Status:   Online
        |   Size:     250140434432 B (250.1 GB)
        |
        +-> Logical Volume Family B47B0B40-CBF2-4D02-BFEF-182061AC6F8E
            Encryption Status:       Unlocked
            Encryption Type:         AES-XTS
            Conversion Status:       Complete
            Conversion Direction:    -none-
            Has Encrypted Extents:   Yes
            Fully Secure:            Yes
            Passphrase Required:     Yes
            |
            +-> Logical Volume 7A998EAE-68FB-4BAC-BF40-7A31D2806B2C
                Disk:                  disk1
                Status:                Online
                Size (Total):          249779191808 B (249.8 GB)
                Conversion Progress:   -none-
                Revertible:            Yes (unlock and decryption required)
                LV Name:               Macintosh HD
                Volume Name:           Macintosh HD
                Content Hint:          Apple_HFS
    ~ belambert$ mount
    /dev/disk1 on / (hfs, local, journaled)
    devfs on /dev (devfs, local, nobrowse)
    map -hosts on /net (autofs, nosuid, automounted, nobrowse)
    map auto_home on /home (autofs, automounted, nobrowse)
    localhost:/vB3z604U-dvSpES6320fHq on /Volumes/MobileBackups (mtmfs, nosuid, read-only, nobrowse)
    ~ belambert$ diskutil info disk2
       Device Identifier:        disk2
       Device Node:              /dev/disk2
       Part of Whole:            disk2
       Device / Media Name:      WD My Book 111A Media
      File System:              None
       Content (IOContent):      GUID_partition_scheme
       OS Can Be Installed:      No
       Media Type:               Generic
       Protocol:                 USB
       SMART Status:             Not Supported
       Total Size:               2.0 TB (2000365289472 Bytes) (exactly 3906963456 512-Byte-Units)
       Volume Free Space:        Not applicable (no file system)
       Device Block Size:        512 Bytes
       Read-Only Media:          No
       Read-Only Volume:         Not applicable (no file system)
       Ejectable:                Yes
      File System:              None
       Content (IOContent):      GUID_partition_scheme
       OS Can Be Installed:      No
       Media Type:               Generic
       Protocol:                 USB
       SMART Status:             Not Supported
       Total Size:               2.0 TB (2000365289472 Bytes) (exactly 3906963456 512-Byte-Units)
       Volume Free Space:        Not applicable (no file system)
       Device Block Size:        512 Bytes
       Read-Only Media:          No
       Read-Only Volume:         Not applicable (no file system)
       Ejectable:                Yes
    belambert  ttys000                   Wed Mar 11 17:34 - 17:39  (00:05)
    belambert  ttys000                   Wed Mar 11 17:33 - 17:34  (00:00)
    wtmp begins Sun Mar  8 14:40
    ~ belambert$ ~ belambert$ diskutil list
    -bash: :~: command not found
    ~ belambert$ /dev/disk0
    -bash: /dev/disk0: Permission denied
    :~ belambert$    #:                       TYPE NAME                    SIZE       IDENTIFIER
    ~ belambert$    0:      GUID_partition_scheme                        *251.0 GB   disk0
    -bash: 0:: command not found
    :~ belambert$    1:                        EFI EFI                     209.7 MB   disk0s1
    -bash: 1:: command not found
    ~ belambert$    2:          Apple_CoreStorage                         250.1 GB   disk0s2
    -bash: 2:: command not found
    ~ belambert$    3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
    -bash: /dev/disk1: Permission denied
    ~ belambert$    #:                       TYPE NAME                    SIZE       IDENTIFIER
    ~ belambert$    0:                  Apple_HFS Macintosh HD           *249.8 GB   disk1
    -bash: 0:: command not found
    ~ belambert$                                  Logical Volume on disk0s2
    -bash: Logical: command not found
    ~ belambert$                                  7A998EAE-68FB-4BAC-BF40-7A31D2806B2C
    -bash: 7A998EAE-68FB-4BAC-BF40-7A31D2806B2C: command not found
    ~ belambert$                                  Unlocked Encrypted
    -bash: Unlocked: command not found
    :~ belambert$ /dev/disk2
    -bash: /dev/disk2: Permission denied
    ~ belambert$    #:                       TYPE NAME                    SIZE       IDENTIFIER
    :~ belambert$    0:      GUID_partition_scheme                        *2.0 TB     disk2
    -bash: 0:: command not found
    ~ belambert$    1:         Microsoft Reserved                         134.2 MB   disk2s1
    -bash: 1:: command not found
    ~ belambert$ ~ belambert$ diskutil cs list
    -bash: ~: command not found
    ~ belambert$ CoreStorage logical volume groups (1 found)
    -bash: syntax error near unexpected token `('
    ~ belambert$ |
    -bash: syntax error near unexpected token `|'
    ~ belambert$ +-- Logical Volume Group 883A56F4-5559-4872-A8DA-960F99655B63
    -bash: +--: command not found
    ~ belambert$     =========================================================
    -bash: =========================================================: command not found
    ~ belambert$     Name:         Macintosh HD
    -bash: Name:: command not found
    ~ belambert$
    -bash: 3:: command not found
    ~ belambert$ /dev/disk1
       Whole:                    Yes
       Internal:                 No
       OS 9 Drivers:             No
       Low Level Format:         Not supported
    :~ belambert$ Last login: Wed Mar 11 19:23:03 on ttys000
    ~ belambert$ diskutil list
       Whole:                    Yes
       Internal:                 No
       OS 9 Drivers:             No
       Low Level Format:         Not supported
    ~ belambert$ Last login: Wed Mar 11 19:23:03 on ttys000
    ~ belambert$ diskutil list
       Volume Name:              Not applicable (no file system)
       Mounted:                  Not applicable (no file system)

    racergirl,
    have you tried resetting your MacBook Pro’s System Management Controller, to see if that makes a difference with the heat?

  • HELP! External hard drive won't show up in finder!

    Last night, I was updating my macbook (from August 2008, still runs on leopard) and it needed to restart. I forgot to eject my LaCie Porsche 1tb external hard drive first and, when it rebooted, I got the error of death (aka "disk was not ejected..."). When connected to the USB port, the drive lights up, I can hear it spinning, but it won't show up in finder and I can't see it in Disk Utility to repair it (after the first error of death, the computer wouldn't even acknowledge that I had the drive plugged in). I've tried plugging it into the different USB ports and even on a different macbook, but no luck in getting the computer to recognize it long enough to use Disk Utility or DiskWarrior. Any tips on how I can get my macbook to read the drive again?

    If the external hard drive is not showing up in Disk Utility when connected to two or more different computers, then the problem is with the hard drive, it is broken. Get a new one.

  • LR 5 my external hard drive no longer appears as a hard drive but as a folder under "Volumes"

    I am running LR 5 on a MacBook pro and my external hard drive no longer appears as a hard drive but as a folder under "Volumes". will this affect my ability to search and store in this external hard drive?  How can I get it back to normal?

    I just started having the same problem, oddly enough with a LaCie 500GB D2 Quadra external. Had it connected via FW800 then suddenly it won't appear in the Finder.
    It shows up as an "Unknown Device" in the System Profiler under the FireWire Bus.
    I do need the data on it so which solution is easier?
    Replace the housing? Or am I better off calling LaCie and using the warrenty?
    Thanks,
    Shannon

  • My Western Digital external hard drive suddenly stopped showing up on my Macbook Pro and disappeared from Disk Utility. It works on a PC.

    My Western Digital external hard drive suddenly stopped showing up on my macbook pro and it disappeared from disk utility. I have tried making invisible files visible but nothing has worked and my hard drive shows up on a PC but not my Mac anymore.

    What is the manufacturer of the external and how old is it? Does it have its own AC power supply or is it USB bus powered?

  • My external hard drive doesn't show up in finder, is it dead?

    My external hard drive doesn't show up in finder.Time machine can't find it. Does this mean my external hard drive is dead?
    I borrowed a friends and switched mine with hers. My acted the same way in her macbook. I switched the cords on the external drives, no change.
    Also, Is there a way to retrieve the information from my sick external hard drive? Thanks for your help.

    If the Disk Utility sees it, you might be able to repair it or recover the data on it with a product such as DiskWarrior or Data Rescue.
    If the Disk Utility doesn't see it, contact professional support.
    (64290)

Maybe you are looking for

  • Need help printing to a Windows 7 networked printer

    Hi, I have a new MacBook Air and I am trying to get it to print wirelessly to a network printer that is connected to a Windows 7 computer.  I am at the point where the printer (an HP laserjet) shows up as the default printer, as it should, but when I

  • Password Violation error while creating users from Admin interface

    Guys, The Sun Identity Manager system throws policy violation error while creating users from Sun Identity Manager Admin interface. Current System: 1. I have configured TAM Pass-Thru authentication for End User Login Application. 2. I have an admin u

  • Mac book pro will not start

    mac book pro 13 wont atart up all i get is a folder icon with a question mark in it any help ?

  • Printing labels in Classic

    I've been printing sequential labels using Avery MacLabelPro and Mac OS 9 Classic with no problem. I upgraded to Tiger and 10.4.4. Now I get a message "This printer cannot print because this application is not AppleEvent aware and you have not instal

  • Objects (XMLType) not supported in nonblocking mode?

    Hi, In 11g OCI guide Nonblocking mode section, it said "The following features and functions are not supported in nonblocking mode:...objects". It looks like if we're selecting embedded objects like XMLType, we can't use nonblocking mode. In fact, wh