External hard drive not showing up on the desktop

I have a external hard drive and
when i turn it on the icon for the drive does not show up.
I used disk warrior and it found sever damaged sections of the drive.
i fixed that and it is still not mounting. Should it get a new hard drive?

Hi Josh,
I used disk warrior and it found sever damaged sections of the drive.
Did it repair them? If you run DW again does it report it as OK?
Open Disk Utility & see if it shows up there, if so highlight it & see if the Mount button/icon mounts it.

Similar Messages

External Hard drive not showing on finder or desktop

My hard drive is only a week old and was working fine until i plugged it in today. The hard drive light still lights up when plugged in and it works when i plug it into a tv and my roommates pc.
However on my macbook the hard drive won't show up in finder or the desktop... it shows in disk utility but options to verify disk etc are 'greyed out' so i can't click on them. THere isn't anything wrong with the hard drive because as stated above it worked on other devices.
Other usb and external hard drives are being recognosed fine and show up in finder.
Can anyone please help?

Same problem here. Sometimes drives disappear completely from the Finder sidebar. Sometimes they just gray out. Quick 'n' easy fix: In Terminal, type:
chflags nohidden /Volumes/MY_PARTITION
(where MY_PARTITION is the name of the drive you can't find).
For the UNIX impaired, if there's a space in your drive name, you can use "\ " to represent the space (no quotes, just the backslash and the space). So for example, Macintosh HD would be typed:
Macintosh\ HD

My external hard drive wont show up in the "Save to:" menu when I try to import videos

My old external broke so I found my old one and plugged it in and went to import some videos on imove from an sd card but my external hard drive wont show up on the "save to:" drop down menu. I've been on utility disk to try and repair disk permission but I can't because the button isn't lit up. I can only click on verify disk or repair disk. I tried both of these but it still wont come on the drop down menu. It is showing up on the left in the event library but it has a little yellow triangle with a black exclamation mark in it.
Hope that all makes sense!
Any help would be very much appreciated!

Ok in disk utility it says Format : MS-DOS (FAT32)
Sorry Im not sure what you mean by can it connect via firewire? Sorry I'm a bit useless with technology haha

Why is my External Hard Drive not showing in Aperture 3.6 Import?

Why is my External Hard Drive not showing in Aperture 3.6 Import?
Only my computer hard drive is and I want to import from an external drive. I have always been able to until I updated to Aperture 3.6 and Yosemite.

Only my computer hard drive is and I want to import from an external drive. I have always been able to until I updated to Aperture 3.6 and Yosemite.
I had the same problem. On the folders on the drive with the Aperture library did show in the Import panel. After I clicked the computer icon in the upper left corner of the Import panel, suddenly all drives appeared.
You can also try to drag the folder you want to import into the Import panel, to point the file chooser to the drive.

External Hard Drive/Not Showing Up on Desktop

I have a G4, running OS X 10.2.8 and recently my kids deleted some important data. So--we bought an external hard drive (WD MyBook 160 GB Essential Edition, which says on the box that it runs 10.2.8 and higher).
We took the external hard drive and the computer to a reputable repair place, the guy there took the hard drive out and using a G6 system, restored what he could to the external hard drive.
We bring it home, plug it in, and the computer is not reading the new external hard drive. I did check in disk utility, and it shows up as a greyed out item on the disk utility.
The external hard drive does show up when hooked up to my husband's office PC.
Any ideas as to why this is happening and how to correct it?
Thanks, Ruth

OK, I figured it out (in case anyone else needs to know) with this information from the Western Digital site:
Macintosh Operating System 10.3.x or earlier will only recognize FAT32 partitions that are smaller than 128-gigabytes. Multiple FAT32 partitions smaller than 128-gigabytes will need to be created in order for Macintosh Operating System 10.3.x or earlier to recognize the partitions. You will need to use a Windows based computer to create FAT32 partitions, as Macintosh does not have the ability to create them.
Macintosh Operating System 10.4.x or later can recognize FAT32 partitions over 128-gigabytes.

My external hard drive not showing up

Hello,
My external hard drive is not showing up on my desktop. I went to finder & preferences>general and made sure I checked "show these items" and checked hard drives. I even unchecked it because I have 2 other external hard drives. When I checked the hard drive box the other 2 hard drives appeared but the third hard drive did not. The hard drive not showing up on my desk top does show up when I double click my system hard drive & can be opened from there, but I want to see it on my desk top. Any help would be appreciated.
Thanks

This procedure is a diagnostic test. It makes no changes to your data.
Please triple-click anywhere in the line below on this page to select it:
ls -@Oaen /V* | pbcopy
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
Wait for a new line ending in a dollar sign ($) to appear below what you entered.
The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
The Terminal window doesn't show the output. Please don't copy anything from there.
If any personal information appears in the output, anonymize before posting, but don’t remove the context.

External Hard Drives not showing

I have 2 external hard drives connected using FW 800, a Western Digital 500TB & a Seagate 500TB. The Western Digital has a habit of freezing and the last time this happened I powered down the iMac. When I re started the iMac neither external hard drive is showing on the desk top what's happening and how do I cure this?

HI MIke,
To start with if your forum profile is correct you need to update your system softare to 10.5.8. Go here and install the v10.5.8 Combo Update
Also, in the Finder from the Menu Bar click Finder/Preferences and select the General tab.
Select the 2nd button and relaunch the Finder.
Carolyn

Windows based WD external hard drive not showing up in Disk Utility to reformat to Mac... how can I erase the drive

We have a WD external harddrive previously used with a PC that we want to completely erase and reformat for use with our iMac desktop for use with Time Machine. The drive shows up on the desktop of the Mac, but it does not show up in Disk Utlity, assuming because it's Windows format. Outside of the standard "erase" feature in Disk Utility, is there any way to reformat this drive for Mac OS X? Or how can I get this drive to show up in Disk Utility? Note: The drive functions properly, has power, and we are able to view its current contents through the desktop icon, so it is a working drive. And we are ok with losing all the current data on the drive.

Hmm strange, I had just moved my external Lacie drive from my windows machine to my iMac and it was showing up in disk utility still formatted fat32 or whatever. I would disconnect the drive and restart the machine then replug the drive and try again.
Also not that it will make a difference ( I dont think it will but hey why not ) try accessing disk utility from the install disk?

How do I get the pictures from my iPhoto on my external Hard Drive to show up in the already existing iPhoto on my MacBook?

I have an early 2008 MacBook. I had been using iPhoto on this MacBook until I purchased an iMac in 2011, at which time I copied my iPhoto Library from my MacBook to my iMac. Then I realized that my pictures and music were consuming the memory on my iMac, so I moved iPhoto and my iTunes LIbrary to an external Hard Drive. Now I am in a situation where I do not have access to my iMac, but will need to use my MacBook as my main computer for the next year. So, I have my iPhoto on an external hard drive and I plug it into my MacBook and see the iPhoto Library folder, but when I click on it, it opens up the old iPhoto that is still existing on my MacBook and will not show any of the new pictures?! At first I thought it wasn't able to show up anything because my MacBook was running two operating systems behind what my iMac was when I was running my iPhoto Library from that computer. So, I upgraded to OS X 10.7.5 and upgraded the existing iPhoto on my MacBook to iPhoto '11 version 9.4.3. However whenever I plug in the external hard drive and click on the iPhoto Library folder to open it up, it is still just opening up the already existing iPhoto on the MacBook (with my older pictures) rather than the iPhoto on the hard drive (with my newer pictures). How can I access my pictures that are on my external hard drive?

Thank you for your advice. I followed your directions, but came up with the same results. However, I did discover that whenever I open up the iPhoto Library that is already existing on my MacBook a certain set of pictures shows up. But then when I open up the iPhoto Library from the Hard drive another set of pictures shows up. BUT not ALL of my pictures are showing up on the iPhoto Library from the hard drive. At least the last two years of pictures are not showing up?! Actually, it appears that all the pictures are there from when I started using iPhoto about 5 years ago up until around the time that I got my iMac desktop computer and started using that (2 years ago). I have noticed that more recent videos I have made are showing up in a folder on the hard drive, but will not appear when I open up iMovie?! Any ideas on how to access my pictures from the last 2 years off of the hard drive???

External Hard Drives not showing up in Premiere Pro Media Browser

Hello All! My external drive(s) aren't showing up in Premiere Pro... and yes, they were working just fine yesterday. The internal drives both show up, but the external drive(s) aren't accessible.
At first I thought that perhaps it was the drive (a new USB 3.0 that worked yesterday)... I tried changing the cable, changing the drive, even changing from a USB 3.0 drive to a FW 800 drive. All show up on my desktop, as well as in other applications (including After Effects, and "other" editing platforms) etc... but none are showing up in Premiere Pro.
FWIW, I tried in both Premiere Pro CC as well as Premiere Pro CS6. I have tried rebooting the computer, creating new projects, holding down the option key while starting Premiere, using Digital Rebellion's CS Repair... all to no avail. Any thoughts?
My system is a MacBook Pro (late 2011), 2.4 GHz Intel Core i7 with 16 GB Ram, running Mac OS X 10.8.5
Thanks in advance for any assistance.
-- Sue

Hi Sue_Lawson,
Welcome to Adobe Forums.
Please try to enable a root user by following the below link
http://support.apple.com/kb/ht1528
Try to check in Premiere Pro CC as well as CS6 whether your external hard drive is recognized or not.
Thanks

External hard drive not showing up on AFP server

hi
i have successfully connected a couple of times to a firewire external hard drive connected to my dad's iMac over the internet (AFP server) for the purpose of backing up some files, but now it doesn't show up at all as a volume when i connect to his iMac through finder/go/connect to server. i don't believe that any settings were changed, so don't understand why it isn't showing up. currently when i get info on the drive 'shared folder' is checked, everyone has permission to read and write and 'ignore ownership on this volume' is checked, and file sharing is enabled in system preferences/sharing.
does anyone have any ideas of what i can do to get the drive to show up again?
thanks
nick

OK, I figured it out (in case anyone else needs to know) with this information from the Western Digital site:
Macintosh Operating System 10.3.x or earlier will only recognize FAT32 partitions that are smaller than 128-gigabytes. Multiple FAT32 partitions smaller than 128-gigabytes will need to be created in order for Macintosh Operating System 10.3.x or earlier to recognize the partitions. You will need to use a Windows based computer to create FAT32 partitions, as Macintosh does not have the ability to create them.
Macintosh Operating System 10.4.x or later can recognize FAT32 partitions over 128-gigabytes.

External Hard Drive not showing up on Macbook

My External Hard Drive with my Time Machine Backups on it are no longer showing up on my Macbook. The disk shows up on disk utility. Also when I boot into Recovery Mode and click on restore from Time Machine Backups my backups are listed.
I've tried to erase the disk and start fresh, but Disk Utility will not unmount the disk.

Choose Preferences from the Finder menu, click on the Desktop and Sidebar tabs, and check the boxes for it.
(111295)

External hard drive not showing up on my mac laptop :(

My 'WD My Passport' External hard drive was working fine earlier on this afternoon and now when I am trying to plug it in it will not show up in my desktop or anywhere in my devices.
The little blue light on it is still flashing, I have tried resterting my computer several times and it is not showing up in my disk utilities can anybody please help me I am so useless with this kind of thing and desperate to get everything on my hard drive back

Try this:
With everything turned off, disconnect the external drive.
Next restart the computer. When the computer has booted, connect the external drive (I am assuming this is a USB connection.)
Turn on the power to the external drive.

External Hard Drive not showing in my computer

I have an external hard drive that im trying to connect to my computer with usb2.0 and it doesn't show up in my computer. I can see it in Disk Management and it says its Online but doesn't assign a letter to it. I'm running Windows 7 Pro 64bit.
I have 2 internal drives. I have tried assigning the backup drive to different letters and that doesn't seem to work. Any ideas???

Hi,
I understand that the external USB hard drive doesn’t show in Windows Explorer but detected in Disk Management.
To resolve this kind of issue, I would like to propose the following suggestions:
1.
Go to Device Manager, uninstall the USB hard drive,
scan for the hardware change and let Windows automatically re-install driver for your device.
2.
Open Registry Editor, navigate to the following item:
HKEY_LOCAL_MACHINE\SYSTEM\MountedDevices
Find if your device is registered and assigned a letter.
As a work around, I suggest you accessing the external hard drive via a Command Prompt, copy out the data, then format the hard drive.
1)
Click Start, type: cmd in the Search bar.
2)
Right Click cmd and click Run as Administrator.
3)
Type the following command:
Copy [source] [destination]
Best Regards
Dale
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

External hard drive not showing in finder or disk utility

1TB WD external hard drive is not showing in finder sidebar, destop, or disk utility. I have checked and all the preferences are ticked. The disk itself is showing a light and making a whirring sound during start up after being plugged into the power.

Three different external drives, on 2 different MacBook Pros (different ages). One drive with internal power, 2 through USB. Also have a new Solid State External Drive and it does work. The were all working before upgrade to Yosemite.
Have tried multiple USB Cords

External hard drive not showing up on the desktop

Similar Messages

Maybe you are looking for