External hard drive, now won't work after a slight knock

Hi folks.. This is my external hard drive:
USB external hard drive 2.5" 1TB Cherry Red Platinum.
I ever so slightly knocked it the other week & since then now, it spins up then ticks, then
stops, but since a bit of messing it now does not tick & spins up fine, but seems not to be recognized.
Any more info if needed not a problem.
PS:
My desktop is an Acer Aspire AX 3400 w/Windows 7 Home Premium.
Thanks for any advice.
Ricky

All caps... !!!! Don't please.
Did you change the connecting interface(cable). If so then replace it once again with matching voltage levels.
If you know a little about hardware, open it and check if the tape is damaged or not. If tape is damaged, there is nothing you can do, you have to take it to the manufacturer.
About the ticking sound; when is it coming. While reading or while connecting. If it is coming while reading then there might be some shunt getting on. Try to open it and connect it directly to your motherboard. Use a SATA cable or IDE.
Connect before starting your machine and check if the BIOS is recognizing it or not. You can get this information in the BIOS advanced settings. (Assuming you know that if not please Google it.)
If still that sound is coming then its beyond you. Should take it to the servicing store.
Please use Mark as Answer; if my reply solved your problem. Use Vote As Helpful if a post was useful. |WWW.FACEBOOK.COM/SONNIE.HIM | |+91-9742-354-384 |

Similar Messages

Using an external hard drive now my time machine is broken

Hi All,
i have an external hard drive now my time machne has overheated and failed
this works fine with time machine
Is it possible for me to backup my windows pc to this external hard drive???
thanks in advance
Jason

I guess the external drive is hanging off the Mac..
Getting access to the drive from PC should be possible.. you may need to move public directory onto the external drive and then set up permissions to do it.. I have not done it and simply would not do it.
External hdd are cheap enough buy one for the pc.. That is then formatted NTFS which windows is going to natively read.. this will be much easier if the backups are ever required than to use HFS+ formatted disk hanging off the Mac.
You can also get your dead TC fixed.
https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repairers

HT1338 my 5th generation ipod won't sync anymore to my PowerMac G4. It worked fine, but when I installed a new hard drive it won't work anymore.

my 5th generation ipod won't sync anymore to my PowerMac G4. It worked fine, but when I installed a new hard drive it won't work anymore. I've re-installed iTunes, the latest version for Tiger, I've reset and restored my iPod. The ipod shows up fine in the source banner and I can transfer files to it, however when I unplug the iPod the files are not there.

Maybe try to repair the iPod's HD using Disk Utility located in the Applications -> Utilities folder. If that doesn't help, try a low level reformat of the drive using the same application. Make sure you choose Mac OS X Extended (Journaled) as the file system format.
B-rock

I just saved my iphoto original library to my external hard drive, now how do i create new space on my hard drive and create a new iphoto library

i just saved my iphoto original library to my external hard drive, now how do i create new space on my hard drive and create a new iphoto library

Trash the copy of the library you just moved. Then Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
But do you want to have two iPhoto Libraries? Why not just use the one on the External?

I put all my itunes folder on external hard drive, now I want to put it back on the mac how do i do this

put all my itunes folder on external hard drive, now I want to put it back on the mac how do i do this.

Drag the entire iTunes folder back to /Music.

I copied my itunes library via an external hard drive. now when i connect my ipod to the new computer i can see my music but my apps are disabled

i copied my itunes library via an external hard drive. now when i connect
my ipod to the new computer i can see my music but my apps are disabled

Here are the official Apple Support instructions:
http://support.apple.com/kb/HT4527
Ciao.

I moved files off my computer to an external hard drive now time machine won't back up like it used to. It says there is not enough room.

My hard drive was completely full (mostly with pictures) so I moved several years worth of photos from the hard drive to an external hard drive I regularly use with the laptop. (Basically my master copies of all my photos back to 1997) I have always had Time Machine set up to back up both the laptop AND that external drive. It's always worked seamlessly until I moved those files. Time Machine has been full for a while now and regularly gives me a message that the oldest files will be deleted. That's fine.
I don't understand why moving files from the laptop to the external hd would now cause the following message (not an exact quote): Time Capsule cannot complete backup. You need 233 gb to backup and time capsule only has 107 gb available. If time capsule was already set to backup up both the laptop and the external hd, why would moving those photos from one hd to the other cause a space issue? It should equal out. And now when I look at the files on the time capsule, it only shows me a recent backup and a partial incomplete backup. None of the older backups are visible anymore. I have not deleted anything directly from the time capsule so I'm thinking somehow the index got damaged. How can I fix this? The error message says to change the settings but I really don't know what settings to change. Help!!

It does not immediately delete the files that are missing.. it merely tries to backup the new files it has discovered on the external drive. Since you moved the files there, the backup at least for a while will contain both copies.. and that is why it doesn't have enough space to backup.
Fixing the problem.. hmm pondini is the expert.. you should be able to delete the backup of the photos in existing backup.. there are instructions to do it.. but it is a very poor way to do things.
Much better. .archive off the existing backup.. this is long and slow but worth it. you need a usb drive of the same size as the TC drive. Then erase the TC and start a fresh set of backups.
The alternative is to use the USB drive as a new target.. but it is much slower than the TC internal drive.
http://pondini.org/TM/12.html

LR won't show images from external hard drive now.

I have LR 5. I updated in March from LR3. I just purchased a second external hard drive to start using for my images after filling up my first. I just tried to go back to external hard drive #1 to look at images from last month, and I can't pull them in to lightroom for some reason. When using external hard drive #1 after updating to lr5, I always had to go to Edit >Open Recent to open a previous catalog to access my images. I think this has something to do with it, because there aren't any other catalog options in LR5 when I switch from external hard drive #2 back to external hard drive #1. I need those images pronto to finish projects!!! Please help and thank you!

This is relevant portion of the support document with a bit of editing for clarity.
If iTunes is running, quit iTunes.
Using a Mac click the icon to open iTunes and immediately press and continue to hold down the Option key.
You should see the following screen:
If iTunes opens normally, close it and try again.
Once you've got that dialog you have two options. If your previous iTunes library database is stored on the external drive use Choose Library to browse to it and open it. If you only have the media folder on the drive then use the Create Library option to create a new iTunes library at /iTunes on the external, move the media folder to /iTunes/iTunes Media and then add it to your new empty library.
tt2

Files moved to external hard drive - now nothing playing in iTunes...help!

*Hi guys,*
*Just wondering if someone can give me some advice really. I think / know I've made a bit of a botch up of my files :-(*
*Here's the story - I'll try to be brief...I have done a number of different things to try and sort this mess out and this is the latest...*
*- Laptop storage full, with over 5000 music files saved on it. Laptop unhappy - says needs more space. I try to accommodate.*
*- Already have all music files backed up on external storage drive. Nice. Delete music files in C:/Program Files/iTunes file. Laptop happy - has enough space.*
*- Delete current iTunes music files. Drag and drop music files from external hard drive into iTunes window. Transfers music. No problem.*
*- Add new files to external hard drive - try to update in iTunes. iTunes not happy - shows exclamation marks by most songs, which then won't play.*
*- iTunes only opened with external hard drive connected and working.*
*- Me now not happy.*
*- Try changing path where library is saved. Does nothing useful.*
*- Only available option is to click on each track and manually locate it. Not fun when there are 600+ files.*
*- Decide to drag and drop files into iTunes window again.*
*- Now ended up with 12000 tracks in my iTunes, half of which are duplicates with exclamation marks that won't play.*
*- Now at end of my tether. Takes hours to move tracks and now using up unecessary room with unplayable tracks.*
*Does anyone know a. where I went wrong (given I've faffed around with it so much...I just want it organised once and for all...) and more importantly, b. what I can do to sort this mess out.*
*Is it actually possible to have all your music stored externally but to have them play through iTunes to transfer onto my iPod???*
*Also, if I used my iPod as a disk drive, and copied the files straight onto there from my hard drive, would they actually play, thus ruling out iTunes altogether?*
*Many thanks in advance.*
*Frustrated MP3 wrangler*

*Also...is there any way I can filter out all the tracks with the ! so I can delete the unplaying copies as they're taking up room in my iTunes? I know how to find duplicates, but then I have to go and delete each one individually...*
*Thank you!*

External Hard Drive is no longer working

Hello. I have had a external hard drive for about 4 months now and it had been working fine. I have my iPhoto library on it along with all things related to my films that i make. After seeing some problems with iPhoto i upgraded to Aperture. I had to rebuild the library because something was wrong with it but after i did that, it loaded in Aperture fine and i was able to use it. I then verified and repaired my external disk, in the sake on making sure everything was okay. i then turned my computer off and went to bed. The next day when i tried to open the library, i couldn't open becuase the library was "locked." after i while, i realized that the entire disk had become "read only." after trying to fix it for the past couple of days by looking into forums and using terminal and exerything, nothing has worked. Now, the disk cannot verify on repair at all, and i still can't change it at all. This disk is very important, and I don't use Time Machine or have a backup. I was going to set it up, but that was the day that i found that is was locked. I would love some help so please try and help me find the problem so we can fix it thank you!
PS i have noticed the disk is a NTFS, but it has been that since i started using it. and it is a Seagate Free Agent Go Flex Drive 1.5tb.
Thanks again
nic

Hi,
Apple doesn't supply a read/write driver for NTFS with any of its operating systems. Are you using a third-party NTFS driver, such as the one supplied by Paragon? If so, that's likely the source of the problem. If not, then something strange is going on, but we'll cross that bridge when we come to it…

HELP. External hard drive suddenly won't show up on Mac.

So, I left for a few minutes and when I got back, there was that warning on my screen that said the disc wasn't ejected properly, etc. Which was weird because the drive was still plugged in fine. Anyway, when this happens, I usually just pull the hard drive out then plug it back in and it works fine but now it won't show up on the desktop or on the disk utility I got it to show up on disk utility once, but the subheading under the hard drive was greyed out. I could click it but when I tried to run Verify or Repair, nothing would happen. It would show up on the history as "repaired disc" but NOTHING. And I am honestly freaking out Please help, anyone

I'd have to agree with WZZZ. That sounds like either a bad connection, bad cable, or faulty supply. The port could be bad as well but the cable either being bad or not properly plugged in or maybe even worn out. When the "disk ejected" message shows up it's usually because somehow the cable was yanked out of the system while it was plugged in. Intermittenet connections in the cable, particularly in supply lines between the drive and the unit can cause this to happen as well...it's as if you unplugged the external hard drive from the system for a very short time, but the system still picks it up and sees it as bad.
If worse comes to worse, download the hard drive troubleshooting book in the downloads section at:
http://scsc-online.com

External hard drive movies won't play on apple tv

I recently purchased an Apple TV unit. Plugged it into the sony TV HDMI input. It sensed the existing wifi I wanted to use. Set up home sharing. Etc.
I recently started copying some old digital video tapes via my iMac to an external hard drive. After reading a few blogs, I imported into iTunes what I thought were the digital home movies from my external hard drive. I then went back to my living room and chose "computers" and then "movies" and low and behold they were there with the correct running times etc. When I chose the home movie I wanted to watch it won't play. Is there some setting that I am over looking?
Sort of weird that I can see the movie selection with a picture (basically the first frame of the video) but can't play it.
Any suggestions would be very helpful. I've tried to figure it out myself, but not knowledgeable about how this mac works I suppose. Any help would be appreciated.
Monte

Welcome to the Apple Community.
Which Apple TV do you have.

Time machine external hard drive in windows not working.

I recently bought a Western Digital external hard drive to use with time machine so that I would have my laptop backed up. When I set up the time machine, it had to format my hard drive, erasing the WD files that were on the drive. I was able to continue using it as an external storage device on the Mac side of my laptop, but when trying to use it on the windows side, it wont show up in My Computer. I'm starting to wonder if I will be unable to use this external drive on anything other than a Mac now that it is set up as my Time Machine.
If that is the case, is there a way that I can reset my drive to not show up as my Time Machine Disk.
Thanks,
JT

If you're going to use the drive on both platforms, does it need to be set up first on the PC, allocating 1/2? to Windows NTFS format, then disable/reset/delete Time Machine backups doing the Mac HFS format thing on remainder of External?
Setup on my Acomdata 7200rpm External is Mac 150GB HFS, Windows 150GB NTFS. On Windows side, is Vista, W7 (32 &64Bit) and recently my daughter's HP Laptop XP which posed a problem until I found that NtBackup.Msi was in VALUEADD folder on the Windows XP install CD. Also available from Microsoft if no install CD. NtBackup makes a .BKF string of the hard drive, runs maybe a little slower than Vista & Windows 7 Backup/Restore Maint. Long time since I restore a .BKF but think it requires an OS - unlike Vista + Windows 7 where the install Disk will retore from External in ~30 minutes.
I have not figured out how to get Leopard restored short of format, then complete (re)install with Time Machine restore kicking in at the end of that process. Takes a great deal of time and some things need fixing after completion. Wondering if Snow Leopard/Disk Utility has any improvements on this score. Refuse to pay for anything that I consider to be intrisically necessary to use of product.

I've moved iTunes to an external hard drive now have massive duplication of albums

Recently moved my iTunes folder to an external hard drive. Used the Itunes preferences to transfer the itunes folder to a new location. Didn't transfer it manually or by drag and drop! Followed this - I hope correctly - by using the iTunes/File/Library/Organise Library tool. May have got this bit wrong....
Result?.........
Here we see, in the second column, that I have both an 'iTunes Music' folder and a folder simply called 'Music' (Highlighted in red). You'll have to take my word for it but these folders have different amounts of music in them. Some is duplicated, some albums are split across the two folders. Howwever, most empty folders are in the 'iTunes Music' folder, whereasost complete folders are in the 'Music' folder! In addition, There's a 'Compilations' folder within the 'iTunes Music' folder (highlighted in blue with a red arrow) which has a small number of compilations most of which I've never selected as compilations.
Note the repetition of folders called 'Automatically add to iTunes' in both the 'iTunes' folder and the 'iTunes Music' folder. There's another one of these in the 'iTunes Media' folder.
Going further in.....
Here we have the 'Music' folder in the 'iTunes' folder. It has its own 'Compilations' folder which is even larger and more irrelevent than the previous one. It also has way more album folders than the 'iTunes Music' folder itself.
If I use the iTunes/File/Library/Organise Library procedure the splash screen that comes up allows me to choose the first optiuon but the second one is greyed out.
One of the results of this is duplicated albums on my iPhone, another is randomly missing tracks in my collection. In addition, my iTunes screen saver now has duplicate album covers and many album covers that I know I've downloaded at high resolution have just gone missing making my iPhone look like its been populated by a chimp! (no offence to our cousins) Where I've discovered a missing track I've used the 'File/ Add to library' procedure. In one case it copied an album folder from the 'iTunes Music' folder where I found it into the 'Music' folder on another occasion exactly the same procedure left the album precisely where it was.
BTW, I have another iTunes folder on my Mac with all the normal stuff in it but only music that I had to add whilst nopt connected to my hard drive.
How can I remove this massive duplication safely?
How can I consolidate my files efficiently without having to go through each folder separately?
How can I remove all these albums from 'Compilations' and prtevent other albums being added?
How can I get all my album artwork back in sync?
Phew!
Thanks!

The folders and files are all normal to a basic iTunes library. They would be there even if you didn't have a single media file. Until you start up with the option key held down, iTunes will keep on looking for your library on the internal drive and will repopulate that folder with those basics if you delete them. You should have a similar folder with contents on your external and that is the one you want iTunes to use. As long as you keep it all intact while copying from one drive to the other, iTunes will be internally consistent and you won't even have to change preferences.
Preferences window
iTunes Media folder location: Just that; where iTunes keeps media. This is not necessarily where the library files (which are what ties the whole thing together) are to be found.
Keep Media Folder Organized - put all your files in folders according to type and name and album etc.
Copy Files to iTunes Media Folder - put it this way, if you didn't have that checked itunes would leave the files wherever you had them when you added them to the library. this one makes sure there is a copy (though not necessarily the only one, but the only on iTunes uses) in your media folder.
What actions take place when itunes "consolidate library" is used?
When you consolidate iTunes looks at all the files you have listed in iTunes and puts them in the location indicated by your media file preference. I don't think it hunts around your drive looking for things that aren't in the library, it just places a copy of those that are innto your media folders. If you want a searching tool you'll have to use a script that does that kind of job.
Your original images are not showing for me so I can't tell what exactly you are seeing.
Again, what I would do given what you have told me is I would make sure iTunes is using the library on the external by holding down the option key while starting iTunes (you only neeed to do that once). If you find there are files on your internal drive that are not in the library on the external then add those and iTunes will place a copy on hte external if you have that "copy files..." preference checked. You'll lose a few things such as playcounts, ratings, on those. If you absolutely must keep those there are a few tricks that can be performed but that's another very long post.

External hard drive is no longer connecting after Mavericks

Hi!
I have been using an eternal hardrive to back up with Time Machine with no problem until I upgraded to Mavericks....then everything went downhill. Now when I plug in my external hard drive it does not register or show at all. What is going on???
So frustrated with Mavericks, so many other complaints and frustrations but for now really want to solve this simple issue.
I have tried both USB ports and it just does not work.
Any suggestions?
Thank you,
Sarvasmarana

When you erased the disk did you select Mac OS Extended Journaled as the format option?

External hard drive, now won't work after a slight knock

Similar Messages

Maybe you are looking for