External hard drive on Airport Extreme Base Station - need some help!!

Can you suggest an external drive make and model that works with the extreme? Need around 300 gb?
What format should the drive be in so my Windows Vista and Windows 7 and my mac will be able to backup to it?
What backup software do you recommend that I run on my Windows Vista and Windows 7 PC to it?
Thanks

Can you suggest an external drive make and model that works with the extreme? Need around 300 gb?
There are literally dozens of external USB hard drives that will work with the 802.11n AirPort Extreme Base Station (AEBSn), but of course, not all. Please check out the following iFelix site to see some that are not recommended. FWIW, I currently use both a Newertech miniStack v3 (750 GB) & a Western Digital MyPassport (500 GB) with my AEBSn without any issues.
What format should the drive be in so my Windows Vista and Windows 7 and my mac will be able to backup to it?
HFS+ for the most efficiency between the AEBSn & the drive(s). Note that the AEBSn's file server will support both AFP & SMB when communicating between Mac & PCs (respectively) for file services. If you don't have a Mac, you can always format the drive in FAT32. Only NTFS (or any of the Linux partition formats) will not be supported by the AEBSn file service.
What backup software do you recommend that I run on my Windows Vista and Windows 7 PC to it?
I use Genie - soft's Genie Backup Manager, but just about any backup software that supports network-attached drives for backups should be fine.

Similar Messages

  • Slow transfer rate of data to remote hard drive on airport extreme base station

    Hi there
    currently trying to transfer RAW picture files to my Seagate Go Flex Hard drive through my wireless network. Have an airport Extreme base station that the hard drive is connected to through a USB cable (3 i think could be 2.0). Taking over an hour to copy across 16 gig worth of data. Is this transfer time to be expected? Can it be quicker by altering or checking the settings in the Airport extreme  base station.

    Things will likely go at least twice as fast if you connect your Mac to one of the LAN <-> ports on the AirPort Extreme.
    With a wired Ethernet connection, you could normally expect between 25-30 GB of data to be transferred per hour.  On average, wireless is typically 2-3 times slower than a direct Ethernet connection.
    And, as you might imagine, the chances of an error occuring during a wireless backup are always higher due to possible interference.

  • Using an External USB soundcard with Airport Extreme Base Station

    Hello, I own a macbook, an airport extreme base station and a Native Instruments Audio Kontrol 1 USB 2.0 external sound card that works like a charm with my macbook. I have a printer and a hard drive connected to the USB from the Airport base station through a hub, and I was wondering if there is any way I could make my macbook recognize the external sound card when connected to the base station's USB port. I would like to be able to play music wirelessly through the base station but the application/driver from Native Instruments does not recognize the sound card plugged to the router.
    Thank you

    if there is any way I could make my macbook recognize the external sound card when connected to the base station's USB port
    First welcome the the Apple Discussions Forum!
    To your question - it's highly unlikely, sorry!

  • Recovering Old Datas on New Drive + Setting Airport Extreme Base Station old and new ones

    Hello All,
    Situation:
    -iMac 24" Alu/2008/2.8 Ghz Intel Core 2 Duo/ 2Go DDR2 SDRAM
    -2 Airport Extreme Base Stations mushroom type,
    -1 Airport Extreme Capsule Model: A1143
    The original 320 Go Hard Drive of my iMac crashed few months ago. A "technician" installed a new Hard Drive 235 Go while trying to recover all datas from old one. Failed.
    No back up. The old disc needs to be unlocked in a dustless atmosphere. Quite expensive at the moment.
    I decided to install OS X from sratch with the original Install Disc delivered with my iMac.
    OS X is 10.5
    Once on line I updated all pre-installed softwares. Among which Aiport Utility 5.6.1 today.
    Problem:
    I would like to get bigger hard drive disc, 1To for example. Does this still exist for this iMac 2008 Alu ?
    How can I do to get my iMac again to OS X 10.9 ?. Does this mean I need to buy all intermediate levels again ?
    How do I get my softwares (the ones on the original Disc: Pack office, Pages, Numbers, etc ...) back on track again, since my iMac is now more like down to factory level ?
    Extending my internet provider from the WiFi router via my 3 Airport Extreme Base Stations: 2 mushroom type that need OS X + Airport Utility softwares at a certain level, while the Capsule might need another level. Right now I tried to set up the 3 of them with this Aiport Utility and though they all recognize the provider network, I can never conclude to extend it with the Base Stations: it drops the case. (WDS trouble which I don't even know what it is, or the Base Station simply desapears from Airport Utility scan, ...)
    Thank you all for you attention.
    Your comments are welcome especially if you have any knowledge on these various subject.
    Can't wait to read your piece of advice.
    Lionnel From Paris (France).

    me too... i connected my hard drive with all my music but i cannot see any of the music that used to be in my itunes... i checked and its there (when I connect the HD directly to my computer) but not when is plugged into the Airport Extreme... Please help!

  • Connecting a external hard drive to airport extreme

    im having some issues here i just got the airport extreme and i got it set up then once i tried to plug in my external HD and i go into the airport utility to set it up. but it says there is no base station plugged in. and i try rescan and it still cant find it. so i unplug the HD and open up airport utility again and then my base is right there and i can change all the settings. so i cant use my HD on the airport extreme base station.
    does anybody have any ideas, help, answers.
    thanks

    well it all of the sudden worked. i just stopped trying to get it to work came back the next day and presto it worked. huh.

  • Airport Extreme Base Station - Need to extend network for extra distance

    The literature on this topic is sparse. I have an Airport Extreme base station. I will like to "extend the signal" so that it is stronger in part of house. I would like to buy a product that will do this. Questions:
    I think this is called "bridging".
    1. Can I do this with the Airport Express as a 2nd unit??
    2. Does the Airport Extreme work with other WDS 2nd units like Netgear?
    3. Is there a darned manual to tell you how to configure the settings on BOTH stations?
    Thanks.

    How new is your Extreme? I ask because if your Extreme supports 802.11n, the setup process will be greatly simplified.

  • Setting up USB External Drive to Airport Extreme Base Station

    I've attached an External Hard Drive to my AEBS. My base computer is connected to the AEBS via Ethernet Cable and can see the external drive under Networked Drive however it shows up twice as Drive Y and Drive Z both showing the exact same capacity.
    My desktop computer is running windows vista, and my laptop is also running vista. My Laptop connects to the AEBS wirelessly. The laptop does not see this External Hard Drive. How do I get my laptop to recognize this drive? Shoule my external hard drive display with two different drive letters, or should it only appear as one? I've not had much luck using this feature of the airport extreme and was the basic reason i purchased the AEBS

    The USB port on the AirPort Extreme will support drive formats of Mac OS Extended (Journaled) and FAT32. NTFS is not supported, so that might explain some of your difficulties.
    What feature did I invoke that automatically established a "third" drive? Where is it established on the physically formatted Mac drive? Does the format of Appleshare just indicate how the partition is accessed?
    Not sure about this. When I format a drive as Mac OS or FAT 32, I see a single drive when accessed from the Finder.

  • Setting up an External hard drive on Airport Extreme

    I have a 10.4.11 Macbook. I have Wirelessly configured computer to my Airport Extreme. I am now out of space and need to add an external hard drive to my Airport. Can someone please help me understand how to do this? Do have to create another wireless connection through Airport? It would seem that I would go through the same network but just add on the USB funtion. The how to manual is not dumbed down enough for me.

    Here's the basic AppleScript to mount (place) the shared drive on your OS X desktop. You will need to substitute the appropriate values for your network where I have placed the angled brackets in the script.
    You will need to run the AppleScript Editor, which you will find in the /Applications/Utilities folder, to create the following script, and then, save as an application which you can run later. I would run it to verify that it actually works. If it does, then you can add it as one of your Login Items of your User Account so that it will run at startup.
    try
              mount volume "afp://<Base Station Name>/<Share Volume Name>" as user name "<You can enter anything here>" with password "<Enter either the Base Station Password or Disk Password, based on the Secure Shared Disks type you are using>"
    end try

  • Bonjour - Connect Windows 7 to external hard drive on Airport Extreme

    I have to use a laptop with windows 7 for work and I want to back up to a hard drive that is connected to my airport extreme station. I downloaded the bonjour print services and I had the printer set up in a minute. I can't figure out how to connect to the external hard drives that are connected to the airport extreme station though?! Obviously bonjour print services is only helping you with the printer. I couldn't install an earlier version of bonjour for windows because of the bonjour print service installation.
    Any ideas how I can connect to those external hard drives? Thanks!

    Thank you. I probably should have figured that out myself, but this did the trick. I am also connecting a new hard drive to my airport extreme. The mac and pc don't see the drive because of the NTFS format. This hard drive will be used for PC business related files only, but I still want to access it using my wireless network. Paragon is supposed to do the trick. I am just wondering if paragon makes the harddrive useable for both, the pc and the mac.

  • How do I use a seagate external hard drive with airport extreme?

    I have a 1tb Seagate external hard drive and I connected it to the USB port at the back of my Airport Extreme. I opened Airport Utility and am now lost. How do I access the hard drive?
    (I have a Macbook Pro running os x version 10.8.2)

    The external hard drive must be formatted either in Apple's HFS+ or in Microsofts FAT32 in order for it to be recognized. You can format the drive by connecting it to your Mac and bringing up "Disk Utility".

  • Using an external hard drive with Airport Extreme

    I'd like to use an external hard drive to store movies and music through my Airport Extreme. The drive is connected to a powered usb hub which is connected to the Extreme. I can see the drive in Airport Utility but I can't figure out how to use it.

    Hi,
    I have just tried to set up an Airport Extreme with an external hard drive at home. I have 4 computers connected to the "network" - an iMac, a MacBookPro and 2 x windows machines. A printer is connected wirelessly to the two Macs.
    I cannot find the hard drive - I have tried the steps mentioned by Bob Timmons Mar 17 2010, but the only things I see under "Shared" in Finder are the iMac and the printer - not the Airport Extreme (seems odd??), not the windows machines, and most importantly, not the hard drive connected to the USB port on the Airport Extreme.
    I therefore expect that the iMac and printer are connected wirelessly and directly, rather than through my network (& I'm happy for the printer to be connected this way, but I do need the PCs and the hard drive all networked).
    According to my network connection, (in top bar on the screen) I am definitely connected to the network - yet nothing else shows in finder??
    I do, however, see the USB hard Drive when I go into Finder>Applications>Utilities>AirportUtility.app, under my Airport Extreme >Disks. I've also gone through all the set up procedures for "File Sharing."
    I have read other posts about formatting the hard drive ether FAT32 or NFTS - is this something I now need to do?? If so, which one should I use, and once I do it, will I then see it?
    Presumably, in order to format the Hard Drive, I will need to disconnect it from the Airport Extreme, and connect it directly to one of the Macs too?
    My apologies for so many questions, but this is all very technical stuff for the non-techie layperson.
    Many thanks for any help anyone can provide on one or more of the questions / issues.
    Martin

  • Unable to print or use external hard drives via Airport Extreme

    Hi.
    I installed Airport Extreme with no problems. Airport utility program shows everything is ok, and shows my printer (Canon LBP5100) and my two external hard drives which are connected to Airport via USB-hub.
    My airport extreme is connected to ADSL-router and is providing another WLAN in my house. The internet connection works fine, but I couldn't print nor use my hard drives. I installed the printer using the bonjour guided printer installation tool.
    I haven't heard that my printer would not be compatible with airport extreme so was my airport purchase totally unnecessary or what tricks should I use to make the printer and the external hard drives be available?
    Sincerely,
    Jarkko
    Finland

    Hi.
    Thank you for your reply. No help though.
    Printer gives me this warning:
    The network cable is not connected, or the printer is not turned on. Check these items.
    And still the hard drives are not visible anywhere.

  • Why can't I find my external hard drive on Airport Extreme?

    I have recently moved into a different home and set up the internet through Airport Extreme that works fine.  However, I can not find the external hard drive plugged in to the Airport USB which used to show up in Macintosh HD under Devices. 
    I have unplugged and restarted the Airport, hard drive, and IMac numerous times.  I have reset the Airport back to original settings and created a new network. Not sure what to do next. 

    The drive was hooked in the exact same way 2 days ago at my old address and worked perfectly.
    "The drive must be formatted in Mac OS Extended (Journaled) to work at the USB port of the AirPort Extreme, so that would be the first thing to check."
    How do I do this?
    "Next, the power at the USB port is borderline as far as its ability to supply adequate power to a hard drive....even if the hard drive has its own power supply.....so a number of users find that they need to use a powered USB hub."
    I will look in to finding a powered USB hub but I don't understand why it would work 2 days ago and not today...
    "You will need to open the Finder and click on the Go menu, then click Network to see the drive. Double click it to mount is on the desktop."
    Correct, I used to find Airport there under Shared where I could click on Airport to access the hard drive.  I don't see Airport at all.
    "Finally, if you are planning to use the drive for Time Machine backups, that type of setup is not officially supported by Apple, so results will be unpredictable if you try this."
    My hard drive is exclusively music files that I share between Imac and Macbook.

  • Time machine problems w/ external hard drive and airport extreme

    Time machine is keeping backup for only 6 days + the hourly backup. When I open time machine preferences, though, it appear that time machine is off. When turning it on it does not show my external hard drive (however, the backup has been running as mentioned above, for 6-day history). When I select other time capsule it shows the airport extreme but nothing can be done from then on.

    Time machine is keeping backup for only 6 days + the hourly backup. When I open time machine preferences, though, it appear that time machine is off. When turning it on it does not show my external hard drive (however, the backup has been running as mentioned above, for 6-day history). When I select other time capsule it shows the airport extreme but nothing can be done from then on.

  • Adding external hard drive to airport extreme for time machine error

    Hello,
    I recently bought an airport extreme that I wanted to combine with an external hard drive in order to do wireless time machine backups.  I hooked this up and the hard drive shows up in the devices menu.
    However, when time machine starts to backup, I get the following error:
    "The backup disk image “/Volumes/Blackmer External MyBook/Benjamin Crispell Blackmer’s MacBook Pro.sparsebundle” could not be created (error 1)."
    When my computer is connected directly to the hard drive, it works fine.
    Any ideas on how to fix this?
    Thank you.

    It is important to understand that Apple does not support Time Machine backups to a drive at the USB port of the AirPort Extreme.  So, that may be an issue here.
    Despite this, users try it anyway. Some appear to be successful for a time, some partially successful, some can't get it to work at all.
    Even if it does appear to work initially, corruption issues may occur down the line without warning. Having tried this myself as a test a few times, I can attest to that.
    If you want to try this anyway, the two important things to check are.....
    The drive must be formatted in Mac OS Extended (Journaled). Other formats will not work
    You almost always need to use a powered USB hub...even if the hard drive has its own power supply....because the USB port is under powered on the AirPort Extreme
    You might also want to consider a secondary backup plan to protect your important files

Maybe you are looking for